Ahoj,
omlouvám se, že vás tu obtěžeuji s věcí, kteoru bych zřejmě zvládl po mnoha hodinách vyřešit, ale nastoupil jsem na sakra těžký a časově náročný gymnázium, takže i těch pár hodin, co jsem se tomu zatím věnoval, je zatraceně cenných. Proto bych požádal někoho, kdo se v Linuxu orientuje trochu víc a to, v čem je problém, pozná na první pohled, aby mi i třeba jen krátce řekl, v čem je problém, řešení bych si už mohl zvládnout najít sám.
Doteď jsem postupoval tak, že jsem si v dmesgu našel řádku, kde byla velká mezera v čase. Tu řádku jsem zadal do googlu a většinou našel nějaké řešení. Takhle jsem postupoval asi 3x (už jsem zapomněl, co to bylo, ale na začátku byla 12 vteřin pauza před něčim s ethernetem), ale vždycky se nakonec vynoří nějaký jiný problém. Buď na to jdu od základu špatně nebo to je minimální bootovací čas na mém NTB.
12.04 64 bit na Lenovu x200s - C2D 1.6ghz, 2gb ram, grafárna intel Gm45, na disk si nevzpomenu, ale vadný sektory nemá.
[ 0.488320] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.488323] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.488328] pci_bus 0000:03: resource 2 [mem 0x7f000000-0x7f1fffff 64bit pref]
[ 0.488332] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.488336] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.488340] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.488345] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 0.488349] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 0.488352] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.488356] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.488360] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.488364] pci_bus 0000:0d: resource 9 [mem 0x7f000000-0xfebfffff]
[ 0.488420] NET: Registered protocol family 2
[ 0.488567] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.489646] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.491622] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.492169] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.492173] TCP reno registered
[ 0.492189] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.492214] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.492339] NET: Registered protocol family 1
[ 0.492360] pci 0000:00:02.0: Boot video device
[ 0.492388] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.492392] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.492403] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.492428] pci 0000:00:1a.0: PCI INT A disabled
[ 0.492438] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.492461] pci 0000:00:1a.1: PCI INT B disabled
[ 0.492469] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.492472] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.492487] pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.492510] pci 0000:00:1a.2: PCI INT C disabled
[ 0.492521] pci 0000:00:1a.7: power state changed by ACPI to D0
[ 0.492527] pci 0000:00:1a.7: power state changed by ACPI to D0
[ 0.492534] pci 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.492566] pci 0000:00:1a.7: PCI INT D disabled
[ 0.492588] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.492591] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.492601] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.492623] pci 0000:00:1d.0: PCI INT A disabled
[ 0.492637] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.492660] pci 0000:00:1d.1: PCI INT B disabled
[ 0.492674] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.492697] pci 0000:00:1d.2: PCI INT C disabled
[ 0.492708] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.492714] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.492725] pci 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.492747] pci 0000:00:1d.7: PCI INT D disabled
[ 0.492770] PCI: CLS 64 bytes, default 64
[ 0.492784] Simple Boot Flag at 0x35 set to 0x1
[ 0.493216] audit: initializing netlink socket (disabled)
[ 0.493228] type=2000 audit(1347643426.488:1): initialized
[ 0.529702] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.543408] VFS: Disk quotas dquot_6.5.2
[ 0.543487] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.544207] fuse init (API version 7.17)
[ 0.544329] msgmni has been set to 3855
[ 0.544746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.544785] io scheduler noop registered
[ 0.544788] io scheduler deadline registered
[ 0.544835] io scheduler cfq registered (default)
[ 0.544994] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.545065] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.545207] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.545267] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.545408] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.545468] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.545631] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.545637] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.545665] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.545669] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.545674] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.545699] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.545705] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.545729] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.545820] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 17aa ss_did 20f3
[ 0.545847] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.545862] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 17aa ss_did 20f3
[ 0.545886] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.545901] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3
[ 0.545929] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.545940] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.546015] intel_idle: MWAIT substates: 0x3122220
[ 0.546018] intel_idle: does not run on family 6 model 23
[ 0.546192] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.546401] ACPI: AC Adapter [AC] (on-line)
[ 0.546490] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.546636] ACPI: Lid Switch [LID]
[ 0.546698] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.546704] ACPI: Sleep Button [SLPB]
[ 0.546776] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.546780] ACPI: Power Button [PWRF]
[ 0.556125] Monitor-Mwait will be used to enter C-1 state
[ 0.564051] Monitor-Mwait will be used to enter C-2 state
[ 0.564083] Monitor-Mwait will be used to enter C-3 state
[ 0.564093] Marking TSC unstable due to TSC halts in idle
[ 0.564108] ACPI: acpi_idle registered with cpuidle
[ 0.608405] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.608409] ACPI: Thermal Zone [THM0] (37 C)
[ 0.609533] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.609536] ACPI: Thermal Zone [THM1] (46 C)
[ 0.609564] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.609574] ACPI: Battery Slot [BAT0] (battery present)
[ 0.609634] ERST: Table is not found!
[ 0.609636] GHES: HEST is not enabled!
[ 0.609732] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.629241] ACPI: Battery Slot [BAT0] (battery present)
[ 0.685308] Freeing initrd memory: 13868k freed
[ 0.760297] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.780531] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17) is a 16550A
[ 0.796303] Linux agpgart interface v0.103
[ 0.796432] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.796677] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.800201] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.800354] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.802414] brd: module loaded
[ 0.803515] loop: module loaded
[ 0.803707] ahci 0000:00:1f.2: version 3.0
[ 0.803723] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.803785] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.803823] ahci: SSS flag set, parallel bus scan disabled
[ 0.803852] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.803857] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 0.803864] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.804488] scsi0 : ahci
[ 0.804619] scsi1 : ahci
[ 0.804726] scsi2 : ahci
[ 0.804832] scsi3 : ahci
[ 0.805115] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 43
[ 0.805120] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 43
[ 0.805123] ata3: DUMMY
[ 0.805125] ata4: DUMMY
[ 0.805247] pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.805272] pata_acpi 0000:00:03.2: setting latency timer to 64
[ 0.805284] pata_acpi 0000:00:03.2: PCI INT C disabled
[ 0.805328] ata_generic 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.805351] ata_generic 0000:00:03.2: setting latency timer to 64
[ 0.805719] scsi4 : ata_generic
[ 0.805821] scsi5 : ata_generic
[ 0.805884] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18
[ 0.805888] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18
[ 0.806294] Fixed MDIO Bus: probed
[ 0.806323] tun: Universal TUN/TAP device driver, 1.6
[ 0.806326] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.806432] PPP generic driver version 2.4.2
[ 0.806571] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.806590] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 0.806596] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 0.806604] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.806621] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.806625] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.806683] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.806717] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.810596] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.810613] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00
[ 0.824023] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.824185] hub 1-0:1.0: USB hub found
[ 0.824191] hub 1-0:1.0: 6 ports detected
[ 0.824292] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.824298] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.824306] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.824322] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.824326] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.824382] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.824413] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.828296] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.828315] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000
[ 0.844023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.844170] hub 2-0:1.0: USB hub found
[ 0.844175] hub 2-0:1.0: 6 ports detected
[ 0.844274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.844291] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.844309] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 0.844314] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 0.844320] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.844329] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.844333] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.844398] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.844442] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 0.844608] hub 3-0:1.0: USB hub found
[ 0.844613] hub 3-0:1.0: 2 ports detected
[ 0.844705] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.844714] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.844718] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.844785] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.844825] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 0.844999] hub 4-0:1.0: USB hub found
[ 0.845004] hub 4-0:1.0: 2 ports detected
[ 0.845087] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 0.845091] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 0.845097] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.845106] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.845110] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.845170] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.845211] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 0.845373] hub 5-0:1.0: USB hub found
[ 0.845385] hub 5-0:1.0: 2 ports detected
[ 0.845468] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.845472] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.845478] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.845487] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.845491] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.845552] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.845594] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 0.845756] hub 6-0:1.0: USB hub found
[ 0.845761] hub 6-0:1.0: 2 ports detected
[ 0.845847] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.845856] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.845860] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.845923] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.845963] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 0.846124] hub 7-0:1.0: USB hub found
[ 0.846129] hub 7-0:1.0: 2 ports detected
[ 0.846216] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.846225] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.846229] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.846287] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.846319] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 0.846481] hub 8-0:1.0: USB hub found
[ 0.846486] hub 8-0:1.0: 2 ports detected
[ 0.846639] usbcore: registered new interface driver libusual
[ 0.846690] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.856357] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.856366] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.856539] mousedev: PS/2 mouse device common for all mice
[ 0.856784] rtc_cmos 00:07: RTC can wake from S4
[ 0.856932] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.856966] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.857066] device-mapper: uevent: version 1.0.3
[ 0.857157] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.857239] cpuidle: using governor ladder
[ 0.857350] cpuidle: using governor menu
[ 0.857353] EFI Variables Facility v0.08 2004-May-17
[ 0.857668] TCP cubic registered
[ 0.857818] NET: Registered protocol family 10
[ 0.858458] NET: Registered protocol family 17
[ 0.858464] Registering the dns_resolver key type
[ 0.858716] PM: Hibernation image not present or could not be loaded.
[ 0.858730] registered taskstats version 1
[ 0.867446] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.872865] Magic number: 12:695:390
[ 0.872873] usb usb8: hash matches
[ 0.873015] rtc_cmos 00:07: setting system clock to 2012-09-14 17:23:47 UTC (1347643427)
[ 0.876147] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.876150] EDD information not available.
[ 1.124086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.125224] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.125229] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.125451] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.125457] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.126631] ata1.00: ATA-8: HITACHI HTS723216L9SA60, FC2ZC50B, max UDMA/100
[ 1.126635] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.127953] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.127958] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.128185] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.128189] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.129326] ata1.00: configured for UDMA/100
[ 1.129540] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72321 FC2Z PQ: 0 ANSI: 5
[ 1.129713] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.129722] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.129795] sd 0:0:0:0: [sda] Write Protect is off
[ 1.129804] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.129840] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.173947] sda: sda1 sda2 < sda5 >
[ 1.174732] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.448070] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.616607] Freeing unused kernel memory: 920k freed
[ 1.616856] Write protecting the kernel read-only data: 12288k
[ 1.623662] Freeing unused kernel memory: 1616k freed
[ 1.629114] Freeing unused kernel memory: 1200k freed
[ 1.649569] udevd[101]: starting version 175
[ 1.971916] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.305123] udevd[321]: starting version 175
[ 13.351875] lp: driver loaded but no devices found
[ 13.374342] Adding 2034684k swap on /dev/sda5. Priority:-1 extents:1 across:2034684k
[ 13.420217] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.427001] mei 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.427009] mei 0000:00:03.0: setting latency timer to 64
[ 13.427064] mei 0000:00:03.0: irq 44 for MSI/MSI-X
[ 13.441373] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 13.441377] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 13.441412] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 13.441426] e1000e 0000:00:19.0: setting latency timer to 64
[ 13.441599] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 13.459659] [drm] Initialized drm 1.1.0 20060810
[ 13.508237] cfg80211: Calling CRDA to update world regulatory domain
[ 13.539914] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.549435] wmi: Mapper loaded
[ 13.666088] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:0c:35:65
[ 13.666094] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 13.666160] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 13.666225] i915 0000:00:02.0: power state changed by ACPI to D0
[ 13.666232] i915 0000:00:02.0: power state changed by ACPI to D0
[ 13.666240] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.666246] i915 0000:00:02.0: setting latency timer to 64
[ 13.682917] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 13.682921] Copyright(c) 2003-2011 Intel Corporation
[ 13.682983] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.682993] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 13.716067] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 13.716071] iwlwifi 0000:03:00.0: pci_resource_base = ffffc9000034c000
[ 13.716074] iwlwifi 0000:03:00.0: HW Revision ID = 0x0
[ 13.716205] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 13.716254] iwlwifi 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[ 13.716318] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 13.735451] iwlwifi 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4
[ 13.735454] iwlwifi 0000:03:00.0: Device SKU: 0Xf0
[ 13.750679] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 13.801358] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 13.801366] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.801368] [drm] Driver supports precise vblank timestamp query.
[ 13.801416] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.853554] Non-volatile memory driver v1.3
[ 13.889678] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 13.889682] tpm_tis 00:0a: Intel iTPM workaround enabled
[ 13.912670] Bluetooth: Core ver 2.16
[ 13.912723] NET: Registered protocol family 31
[ 13.912726] Bluetooth: HCI device and connection manager initialized
[ 13.912729] Bluetooth: HCI socket layer initialized
[ 13.912731] Bluetooth: L2CAP socket layer initialized
[ 13.912739] Bluetooth: SCO socket layer initialized
[ 13.922791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.922794] Bluetooth: BNEP filters: protocol multicast
[ 13.925384] ppdev: user-space parallel port driver
[ 13.940125] Bluetooth: RFCOMM TTY layer initialized
[ 13.940131] Bluetooth: RFCOMM socket layer initialized
[ 13.940133] Bluetooth: RFCOMM ver 1.11
[ 13.947120] type=1400 audit(1347643440.569:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=846 comm="apparmor_parser"
[ 13.947772] type=1400 audit(1347643440.569:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=846 comm="apparmor_parser"
[ 14.048376] type=1400 audit(1347643440.673:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
[ 14.048914] type=1400 audit(1347643440.673:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
[ 14.049223] type=1400 audit(1347643440.673:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"
[ 14.126059] init: failsafe main process (910) killed by TERM signal
[ 14.259692] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 14.259730] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 14.259733] thinkpad_acpi: ThinkPad BIOS 6DET42WW (2.06 ), EC 7XHT22WW-1.04
[ 14.259736] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470BY1
[ 14.309690] type=1400 audit(1347643440.933:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1064 comm="apparmor_parser"
[ 14.314889] type=1400 audit(1347643440.937:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1063 comm="apparmor_parser"
[ 14.317112] type=1400 audit(1347643440.941:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1064 comm="apparmor_parser"
[ 14.317422] type=1400 audit(1347643440.941:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1064 comm="apparmor_parser"
[ 14.333652] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
[ 14.333884] Registered led device: phy0-led
[ 14.333923] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 14.337021] type=1400 audit(1347643440.961:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1067 comm="apparmor_parser"
[ 14.375537] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 14.375542] cfg80211: World regulatory domain updated:
[ 14.375544] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.375548] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.375551] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.375554] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.375557] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.375560] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.383438] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 14.384651] thinkpad_acpi: radio switch found; radios are enabled
[ 14.393108] Registered led device: tpacpi::thinklight
[ 14.393774] Registered led device: tpacpi::power
[ 14.394171] Registered led device: tpacpi::standby
[ 14.394565] Registered led device: tpacpi::thinkvantage
[ 14.410146] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 14.412393] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 14.414280] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4
[ 14.428292] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 14.486905] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 14.487284] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.487622] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.541997] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 14.547588] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 14.560316] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[ 14.594966] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 14.595350] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[ 14.606701] fbcon: inteldrmfb (fb0) is primary device
[ 14.606821] Console: switching to colour frame buffer device 160x50
[ 14.606853] fb0: inteldrmfb frame buffer device
[ 14.606855] drm: registered panic notifier
[ 14.610868] acpi device:02: registered as cooling_device2
[ 14.611006] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 14.611062] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 14.611149] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.611196] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.611269] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 14.611305] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 14.652937] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 14.655306] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.655502] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.655680] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.655860] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.758389] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 14.758777] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[ 14.807558] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.807865] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.354085] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 17.868081] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 17.868169] ehci_hcd 0000:00:1a.7: PME# enabled
[ 17.884114] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 17.884178] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 17.900085] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xf2826c00-0xf2826fff] (PCI address [0xf2826c00-0xf2826fff])
[ 17.900100] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 17.900130] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[ 17.900169] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 17.900221] ehci_hcd 0000:00:1a.7: PME# disabled
[ 17.900233] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 17.900243] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 17.900259] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 17.900273] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 18.050252] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 18.050391] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 18.050595] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 18.050604] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 18.050718] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 18.050726] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 18.050741] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.050755] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 18.349876] init: plymouth-stop pre-start process (2058) terminated with status 1
[ 18.870404] e1000e 0000:00:19.0: PCI INT A disabled
[ 18.870423] e1000e 0000:00:19.0: PME# enabled
[ 22.536970] wlan0: authenticate with c8:3a:35:46:0f:18 (try 1)
[ 22.539709] wlan0: authenticated
[ 22.541851] wlan0: associate with c8:3a:35:46:0f:18 (try 1)
[ 22.545012] wlan0: RX AssocResp from c8:3a:35:46:0f:18 (capab=0x411 status=0 aid=1)
[ 22.545016] wlan0: associated
[ 22.553827] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 32.624111] wlan0: no IPv6 routers present
Díky moc za jakoukoliv radu, pokud jsem na něco zapomněl, tak se omlouvám a rád doplním