Nejde vypnúť PC

[memnon.rhodes]

Ave,
mám menší problém s notebook. Nainštaloval som si ovládač na grafickú kartu nVidia ( cez správu neslobodných ovládačov), inštalácia prebehla úspešne. Ale keď dám vypnúť PC tak sa mi počítač reštartuje ale už nenabehne operačný systém ale len čiarna obrazovka s blikajúcou čiarkov .

Za dobrú radu vopred ĎAKUJEM

[Cuore]

Co tě vedlo k tomu, aby si instaloval nesvobodné ovladače? zvědavost? potřeba vyššího výkonu? Ono totiž 12.10 + nesvobodné ovladače je opruz. Pokud jen zvědavost, tak to opět odinstaluj a máš klid  Jinak proč to nejede ti napoví log Xorg.0.log, ale pravděpodobně to budou nesvobodné ovladače. Pokud máš xorg.conf tak ho přejmenuj a počítač by ti měl naběhnout na svobodné ovladače. Konzole ti funguje, takže ctrl+alt+F1 tam se přihlásíš a dej

Kód: [Vybrat]

nano /var/log/Xorg.0.log na konci logu budeš mít (EE) a tam se mrkni proč to nenaběhne. pak jestli to bude ovladači jdi do složky

Kód: [Vybrat]

cd etc/X11 a tam dej

Kód: [Vybrat]

ls Pokud tam máš xorg.conf tak ho přejmenuj třeba takhle

Kód: [Vybrat]

sudo mv xorg.conf xorg.conf_zaloha a pak restartuj

Kód: [Vybrat]

sudo reboot pokud nenaběhne budeš muset ovladače odebrat úplně.

[memnon.rhodes]

Salve, zvedavosť to nebolo práve naopak   . Používam program Blender ak ak nemám nainštalovaný ovládač na grafiku tak to robí zaujímavé veci... 
Zabudol som spomenúť, že keď mi nabehne v tom čiernom oknu (neviem či je to príkazový riadok, lebo príkazy typu ls, top... vôbec neberie ) a "surovo" ho vypnem tak potom nabehne OK ale zasa keď dám vypnúť tak sa reštartne....
 

[Cuore]

prohledej ten log tam bude víc informací, proč to tedy kolabuje.

[memnon.rhodes]

Salve, tak som našil ten log súbor, neviem či chceš vidieť celý súbor alebo len EE?? Tak zatiaľ dám výpis chyb:

Kód: [Vybrat]

[    21.026] (EE) Failed to load module "nv" (module does not exist, 0)
[    21.071] (EE) Failed to load module "nv" (module does not exist, 0)
[    21.184] (EE) open /dev/dri/card0: No such file or directory
[    21.184] (EE) open /dev/dri/card0: No such file or directory
[    21.194] (EE) open /dev/fb0: No such file or directory

Predtým som použival Xubuntu 12.04 a tam to fungovalo v poriadku...

[Cuore]

dej sem prosím celý log ať je tam vidět návaznost. Nicméně to vypadá na špatně nainstalovanou kartu, takže budeš muset reinstalovat. Na druhou stranu mě zaráží, že ti to jede a až dáš vypnout, tak se místo toho restartuje a pak nastane onen problém? To je zvláštní chování... Instalaci budeš muset asi provést ručně http://wiki.ubuntu.cz/grafick%C3%A9_karty_nvidia ono pomocí toho správce to občas nedopadne, ale první sem dej ten log. Ještě otestuj funkčnost akcelerace

Kód: [Vybrat]

glxinfo | grep direct co to vypíše.

[memnon.rhodes]

glxinfo | grep direct

- pritom mi uplne zamrzol počitač

Tu je výpis z log:

Kód: [Vybrat]

[    17.993]
X.Org X Server 1.13.0.901 (1.13.1 RC 1)
Release Date: 2012-11-22
[    17.993] X Protocol Version 11, Revision 0
[    17.993] Build Operating System: Linux 2.6.24-32-xen i686 Ubuntu
[    17.993] Current Operating System: Linux X5-452 3.7.0-4-generic #12-Ubuntu SMP Wed Nov 28 00:00:47 UTC 2012 i686
[    17.993] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-4-generic root=UUID=f401fdd2-15a8-47e4-9c3c-67b2ae30da9c ro quiet splash
[    17.993] Build Date: 23 November 2012  10:02:37AM
[    17.993] xorg-server 2:1.13.0.901+git20121123+server-1.13-branch.c0e68f8e-0ubuntu0ricotz~quantal (For technical support please see http://www.ubuntu.com/support)
[    17.993] Current version of pixman: 0.26.0
[    17.993] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    17.993] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.993] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec  7 18:24:27 2012
[    18.109] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.241] (==) No Layout section.  Using the first Screen section.
[    18.241] (==) No screen section available. Using defaults.
[    18.241] (**) |-->Screen "Default Screen Section" (0)
[    18.241] (**) |   |-->Monitor "<default monitor>"
[    18.241] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    18.241] (==) Automatically adding devices
[    18.241] (==) Automatically enabling devices
[    18.241] (==) Automatically adding GPU devices
[    18.416] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.416] Entry deleted from font path.
[    18.416] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    18.416] Entry deleted from font path.
[    18.416] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    18.416] Entry deleted from font path.
[    18.423] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    18.423] Entry deleted from font path.
[    18.423] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    18.423] Entry deleted from font path.
[    18.423] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    18.423] Entry deleted from font path.
[    18.423] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    18.423] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    18.423] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.423] (II) Loader magic: 0xb7705640
[    18.423] (II) Module ABI versions:
[    18.423] X.Org ANSI C Emulation: 0.4
[    18.423] X.Org Video Driver: 13.1
[    18.423] X.Org XInput driver : 18.0
[    18.423] X.Org Server Extension : 7.0
[    18.426] (--) PCI:*(0:1:0:0) 10de:0428:1462:3fe9 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[    18.427] (II) Open ACPI successful (/var/run/acpid.socket)
[    18.427] Initializing built-in extension Generic Event Extension
[    18.427] Initializing built-in extension SHAPE
[    18.427] Initializing built-in extension MIT-SHM
[    18.427] Initializing built-in extension XInputExtension
[    18.428] Initializing built-in extension XTEST
[    18.430] Initializing built-in extension BIG-REQUESTS
[    18.430] Initializing built-in extension SYNC
[    18.430] Initializing built-in extension XKEYBOARD
[    18.430] Initializing built-in extension XC-MISC
[    18.430] Initializing built-in extension SECURITY
[    18.430] Initializing built-in extension XINERAMA
[    18.430] Initializing built-in extension XFIXES
[    18.430] Initializing built-in extension RENDER
[    18.430] Initializing built-in extension RANDR
[    18.430] Initializing built-in extension COMPOSITE
[    18.430] Initializing built-in extension DAMAGE
[    18.430] Initializing built-in extension MIT-SCREEN-SAVER
[    18.430] Initializing built-in extension DOUBLE-BUFFER
[    18.430] Initializing built-in extension RECORD
[    18.430] Initializing built-in extension DPMS
[    18.430] Initializing built-in extension X-Resource
[    18.430] Initializing built-in extension XVideo
[    18.430] Initializing built-in extension XVideo-MotionCompensation
[    18.430] Initializing built-in extension XFree86-VidModeExtension
[    18.430] Initializing built-in extension XFree86-DGA
[    18.430] Initializing built-in extension XFree86-DRI
[    18.430] Initializing built-in extension DRI2
[    18.430] (II) LoadModule: "glx"
[    18.478] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[    20.830] (II) Module glx: vendor="NVIDIA Corporation"
[    20.830] compiled for 4.0.2, module version = 1.0.0
[    20.830] Module class: X.Org Server Extension
[    20.830] (II) NVIDIA GLX Module  310.19  Wed Nov  7 23:42:11 PST 2012
[    20.830] Loading extension GLX
[    20.830] (==) Matched nvidia as autoconfigured driver 0
[    20.830] (==) Matched nouveau as autoconfigured driver 1
[    20.830] (==) Matched nv as autoconfigured driver 2
[    20.830] (==) Matched vesa as autoconfigured driver 3
[    20.830] (==) Matched modesetting as autoconfigured driver 4
[    20.830] (==) Matched fbdev as autoconfigured driver 5
[    20.830] (==) Assigned the driver to the xf86ConfigLayout
[    20.830] (II) LoadModule: "nvidia"
[    20.830] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    20.922] (II) Module nvidia: vendor="NVIDIA Corporation"
[    20.922] compiled for 4.0.2, module version = 1.0.0
[    20.922] Module class: X.Org Video Driver
[    20.948] (II) LoadModule: "nouveau"
[    20.991] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    21.016] (II) Module nouveau: vendor="X.Org Foundation"
[    21.016] compiled for 1.13.0.901, module version = 1.0.4
[    21.016] Module class: X.Org Video Driver
[    21.016] ABI class: X.Org Video Driver, version 13.1
[    21.016] (II) LoadModule: "nv"
[    21.026] (WW) Warning, couldn't open module nv
[    21.026] (II) UnloadModule: "nv"
[    21.026] (II) Unloading nv
[    21.026] (EE) Failed to load module "nv" (module does not exist, 0)
[    21.026] (II) LoadModule: "vesa"
[    21.026] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.041] (II) Module vesa: vendor="X.Org Foundation"
[    21.041] compiled for 1.13.0, module version = 2.3.2
[    21.041] Module class: X.Org Video Driver
[    21.041] ABI class: X.Org Video Driver, version 13.0
[    21.041] (II) LoadModule: "modesetting"
[    21.041] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.053] (II) Module modesetting: vendor="X.Org Foundation"
[    21.053] compiled for 1.13.0, module version = 0.5.0
[    21.053] Module class: X.Org Video Driver
[    21.053] ABI class: X.Org Video Driver, version 13.0
[    21.053] (II) LoadModule: "fbdev"
[    21.053] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.070] (II) Module fbdev: vendor="X.Org Foundation"
[    21.070] compiled for 1.12.99.903, module version = 0.4.3
[    21.070] Module class: X.Org Video Driver
[    21.070] ABI class: X.Org Video Driver, version 13.0
[    21.070] (==) Matched nvidia as autoconfigured driver 0
[    21.070] (==) Matched nouveau as autoconfigured driver 1
[    21.070] (==) Matched nv as autoconfigured driver 2
[    21.070] (==) Matched vesa as autoconfigured driver 3
[    21.070] (==) Matched modesetting as autoconfigured driver 4
[    21.070] (==) Matched fbdev as autoconfigured driver 5
[    21.070] (==) Assigned the driver to the xf86ConfigLayout
[    21.070] (II) LoadModule: "nvidia"
[    21.070] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    21.070] (II) Module nvidia: vendor="NVIDIA Corporation"
[    21.070] compiled for 4.0.2, module version = 1.0.0
[    21.070] Module class: X.Org Video Driver
[    21.070] (II) UnloadModule: "nvidia"
[    21.070] (II) Unloading nvidia
[    21.070] (II) Failed to load module "nvidia" (already loaded, -1217646750)
[    21.070] (II) LoadModule: "nouveau"
[    21.070] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    21.070] (II) Module nouveau: vendor="X.Org Foundation"
[    21.071] compiled for 1.13.0.901, module version = 1.0.4
[    21.071] Module class: X.Org Video Driver
[    21.071] ABI class: X.Org Video Driver, version 13.1
[    21.071] (II) UnloadModule: "nouveau"
[    21.071] (II) Unloading nouveau
[    21.071] (II) Failed to load module "nouveau" (already loaded, -1217646750)
[    21.071] (II) LoadModule: "nv"
[    21.071] (WW) Warning, couldn't open module nv
[    21.071] (II) UnloadModule: "nv"
[    21.071] (II) Unloading nv
[    21.071] (EE) Failed to load module "nv" (module does not exist, 0)
[    21.071] (II) LoadModule: "vesa"
[    21.072] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.072] (II) Module vesa: vendor="X.Org Foundation"
[    21.072] compiled for 1.13.0, module version = 2.3.2
[    21.072] Module class: X.Org Video Driver
[    21.072] ABI class: X.Org Video Driver, version 13.0
[    21.072] (II) UnloadModule: "vesa"
[    21.072] (II) Unloading vesa
[    21.072] (II) Failed to load module "vesa" (already loaded, 0)
[    21.072] (II) LoadModule: "modesetting"
[    21.072] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.072] (II) Module modesetting: vendor="X.Org Foundation"
[    21.072] compiled for 1.13.0, module version = 0.5.0
[    21.072] Module class: X.Org Video Driver
[    21.072] ABI class: X.Org Video Driver, version 13.0
[    21.072] (II) UnloadModule: "modesetting"
[    21.072] (II) Unloading modesetting
[    21.072] (II) Failed to load module "modesetting" (already loaded, 0)
[    21.072] (II) LoadModule: "fbdev"
[    21.073] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.073] (II) Module fbdev: vendor="X.Org Foundation"
[    21.073] compiled for 1.12.99.903, module version = 0.4.3
[    21.073] Module class: X.Org Video Driver
[    21.073] ABI class: X.Org Video Driver, version 13.0
[    21.073] (II) UnloadModule: "fbdev"
[    21.073] (II) Unloading fbdev
[    21.073] (II) Failed to load module "fbdev" (already loaded, 0)
[    21.074] (II) NVIDIA dlloader X Driver  310.19  Wed Nov  7 23:23:35 PST 2012
[    21.074] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    21.086] (II) NOUVEAU driver
[    21.086] (II) NOUVEAU driver for NVIDIA chipset families :
[    21.087] RIVA TNT        (NV04)
[    21.087] RIVA TNT2       (NV05)
[    21.087] GeForce 256     (NV10)
[    21.087] GeForce 2       (NV11, NV15)
[    21.087] GeForce 4MX     (NV17, NV18)
[    21.087] GeForce 3       (NV20)
[    21.087] GeForce 4Ti     (NV25, NV28)
[    21.087] GeForce FX      (NV3x)
[    21.087] GeForce 6       (NV4x)
[    21.087] GeForce 7       (G7x)
[    21.087] GeForce 8       (G8x)
[    21.087] GeForce GTX 200 (NVA0)
[    21.087] GeForce GTX 400 (NVC0)
[    21.087] (II) VESA: driver for VESA chipsets: vesa
[    21.087] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.087] (II) FBDEV: driver for framebuffer: fbdev
[    21.087] (++) using VT number 7

[    21.094] (II) Loading sub module "wfb"
[    21.094] (II) LoadModule: "wfb"
[    21.094] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    21.180] (II) Module wfb: vendor="X.Org Foundation"
[    21.180] compiled for 1.13.0.901, module version = 1.0.0
[    21.180] ABI class: X.Org ANSI C Emulation, version 0.4
[    21.180] (II) Loading sub module "ramdac"
[    21.180] (II) LoadModule: "ramdac"
[    21.180] (II) Module "ramdac" already built-in
[    21.183] (WW) Falling back to old probe method for vesa
[    21.184] (WW) Falling back to old probe method for modesetting
[    21.184] (EE) open /dev/dri/card0: No such file or directory
[    21.184] (EE) open /dev/dri/card0: No such file or directory
[    21.184] (WW) Falling back to old probe method for fbdev
[    21.184] (II) Loading sub module "fbdevhw"
[    21.184] (II) LoadModule: "fbdevhw"
[    21.184] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.194] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.194] compiled for 1.13.0.901, module version = 0.0.2
[    21.194] ABI class: X.Org Video Driver, version 13.1
[    21.194] (EE) open /dev/fb0: No such file or directory
[    21.194] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    21.194] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    21.194] (==) NVIDIA(0): RGB weight 888
[    21.194] (==) NVIDIA(0): Default visual is TrueColor
[    21.194] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    21.194] (**) NVIDIA(0): Enabling 2D acceleration
[    22.269] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    22.269] (II) NVIDIA(GPU-0):     Vision stereo.
[    22.309] (II) NVIDIA(0): NVIDIA GPU GeForce 8400M G (G86M) at PCI:1:0:0 (GPU-0)
[    22.309] (--) NVIDIA(0): Memory: 524288 kBytes
[    22.309] (--) NVIDIA(0): VideoBIOS: 60.86.38.00.29
[    22.309] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    22.313] (--) NVIDIA(0): Valid display device(s) on GeForce 8400M G at PCI:1:0:0
[    22.313] (--) NVIDIA(0):     CRT-0
[    22.313] (--) NVIDIA(0):     TV-0
[    22.313] (--) NVIDIA(0):     Seiko/Epson (DFP-0) (connected)
[    22.313] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    22.313] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    22.313] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[    22.313] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[    22.313] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    22.313] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    22.313] (**) NVIDIA(0):     been enabled on all display devices.)
[    22.314] (==) NVIDIA(0):
[    22.314] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    22.314] (==) NVIDIA(0):     will be used as the requested mode.
[    22.314] (==) NVIDIA(0):
[    22.314] (II) NVIDIA(0): Validated MetaModes:
[    22.314] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    22.314] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[    23.326] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[    23.326] (--) NVIDIA(0):     option
[    23.326] (II) UnloadModule: "nouveau"
[    23.326] (II) Unloading nouveau
[    23.326] (II) UnloadModule: "vesa"
[    23.326] (II) Unloading vesa
[    23.326] (II) UnloadModule: "modesetting"
[    23.326] (II) Unloading modesetting
[    23.326] (II) UnloadModule: "fbdev"
[    23.326] (II) Unloading fbdev
[    23.326] (II) UnloadSubModule: "fbdevhw"
[    23.326] (II) Unloading fbdevhw
[    23.326] (--) Depth 24 pixmap format is 32 bpp
[    23.326] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    23.338] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    23.685] Loading extension NV-GLX
[    23.732] (==) NVIDIA(0): Disabling shared memory pixmaps
[    23.732] (==) NVIDIA(0): Backing store disabled
[    23.732] (==) NVIDIA(0): Silken mouse enabled
[    23.733] (==) NVIDIA(0): DPMS enabled
[    23.733] Loading extension NV-CONTROL
[    23.733] Loading extension XINERAMA
[    23.733] (II) Loading sub module "dri2"
[    23.733] (II) LoadModule: "dri2"
[    23.733] (II) Module "dri2" already built-in
[    23.733] (II) NVIDIA(0): [DRI2] Setup complete
[    23.733] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    23.733] (--) RandR disabled
[    23.747] (II) Initializing extension GLX
[    23.963] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    23.979] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    23.979] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.979] (II) LoadModule: "evdev"
[    23.979] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.036] (II) Module evdev: vendor="X.Org Foundation"
[    24.036] compiled for 1.13.0, module version = 2.7.3
[    24.036] Module class: X.Org XInput Driver
[    24.036] ABI class: X.Org XInput driver, version 18.0
[    24.036] (II) Using input driver 'evdev' for 'Power Button'
[    24.036] (**) Power Button: always reports core events
[    24.036] (**) evdev: Power Button: Device: "/dev/input/event3"
[    24.036] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.036] (--) evdev: Power Button: Found keys
[    24.036] (II) evdev: Power Button: Configuring as keyboard
[    24.036] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    24.036] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.036] (**) Option "xkb_rules" "evdev"
[    24.036] (**) Option "xkb_model" "pc105"
[    24.036] (**) Option "xkb_layout" "sk"
[    24.037] (**) Option "xkb_variant" "qwerty"
[    24.040] (II) XKB: reuse xkmfile /var/lib/xkb/server-FC37972E27A8F94CD9F5DD859C120B9D933CC5F8.xkm
[    24.068] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    24.068] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.068] (II) Using input driver 'evdev' for 'Video Bus'
[    24.068] (**) Video Bus: always reports core events
[    24.068] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    24.068] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.068] (--) evdev: Video Bus: Found keys
[    24.068] (II) evdev: Video Bus: Configuring as keyboard
[    24.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[    24.068] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.068] (**) Option "xkb_rules" "evdev"
[    24.069] (**) Option "xkb_model" "pc105"
[    24.069] (**) Option "xkb_layout" "sk"
[    24.069] (**) Option "xkb_variant" "qwerty"
[    24.069] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    24.069] (II) No input driver specified, ignoring this device.
[    24.069] (II) This device may have been added with another device file.
[    24.070] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    24.070] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.070] (II) Using input driver 'evdev' for 'Sleep Button'
[    24.070] (**) Sleep Button: always reports core events
[    24.070] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    24.070] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    24.070] (--) evdev: Sleep Button: Found keys
[    24.070] (II) evdev: Sleep Button: Configuring as keyboard
[    24.070] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/PNP0C09:00/PNP0C0E:00/input/input1/event1"
[    24.070] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    24.070] (**) Option "xkb_rules" "evdev"
[    24.070] (**) Option "xkb_model" "pc105"
[    24.070] (**) Option "xkb_layout" "sk"
[    24.070] (**) Option "xkb_variant" "qwerty"
[    24.071] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    24.071] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.071] (II) Using input driver 'evdev' for 'Power Button'
[    24.071] (**) Power Button: always reports core events
[    24.071] (**) evdev: Power Button: Device: "/dev/input/event2"
[    24.071] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.071] (--) evdev: Power Button: Found keys
[    24.071] (II) evdev: Power Button: Configuring as keyboard
[    24.071] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    24.071] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    24.071] (**) Option "xkb_rules" "evdev"
[    24.071] (**) Option "xkb_model" "pc105"
[    24.071] (**) Option "xkb_layout" "sk"
[    24.071] (**) Option "xkb_variant" "qwerty"
[    24.072] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    24.072] (II) No input driver specified, ignoring this device.
[    24.072] (II) This device may have been added with another device file.
[    24.072] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    24.072] (II) No input driver specified, ignoring this device.
[    24.072] (II) This device may have been added with another device file.
[    24.073] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[    24.073] (II) No input driver specified, ignoring this device.
[    24.073] (II) This device may have been added with another device file.
[    24.073] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event6)
[    24.073] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev keyboard catchall"
[    24.074] (II) Using input driver 'evdev' for 'MOSART Semi. 2.4G Keyboard Mouse'
[    24.074] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events
[    24.074] (**) evdev: MOSART Semi. 2.4G Keyboard Mouse: Device: "/dev/input/event6"
[    24.074] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Vendor 0x62a Product 0x3286
[    24.074] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found keys
[    24.074] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Configuring as keyboard
[    24.074] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6/event6"
[    24.074] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: KEYBOARD, id 10)
[    24.074] (**) Option "xkb_rules" "evdev"
[    24.074] (**) Option "xkb_model" "pc105"
[    24.074] (**) Option "xkb_layout" "sk"
[    24.074] (**) Option "xkb_variant" "qwerty"
[    24.075] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event7)
[    24.075] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev pointer catchall"
[    24.075] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev keyboard catchall"
[    24.075] (II) Using input driver 'evdev' for 'MOSART Semi. 2.4G Keyboard Mouse'
[    24.075] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events
[    24.075] (**) evdev: MOSART Semi. 2.4G Keyboard Mouse: Device: "/dev/input/event7"
[    24.075] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Vendor 0x62a Product 0x3286
[    24.075] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found 9 mouse buttons
[    24.075] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found scroll wheel(s)
[    24.075] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found relative axes
[    24.075] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found x and y relative axes
[    24.075] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found absolute axes
[    24.075] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Forcing absolute x/y axes to exist.
[    24.075] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found keys
[    24.075] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Configuring as mouse
[    24.075] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Configuring as keyboard
[    24.075] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Adding scrollwheel support
[    24.075] (**) evdev: MOSART Semi. 2.4G Keyboard Mouse: YAxisMapping: buttons 4 and 5
[    24.075] (**) evdev: MOSART Semi. 2.4G Keyboard Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.075] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input7/event7"
[    24.075] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: KEYBOARD, id 11)
[    24.075] (**) Option "xkb_rules" "evdev"
[    24.075] (**) Option "xkb_model" "pc105"
[    24.075] (**) Option "xkb_layout" "sk"
[    24.075] (**) Option "xkb_variant" "qwerty"
[    24.076] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: initialized for relative axes.
[    24.076] (WW) evdev: MOSART Semi. 2.4G Keyboard Mouse: ignoring absolute axes.
[    24.076] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) keeping acceleration scheme 1
[    24.076] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration profile 0
[    24.076] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration factor: 2.000
[    24.076] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration threshold: 4
[    24.076] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/mouse0)
[    24.076] (II) No input driver specified, ignoring this device.
[    24.076] (II) This device may have been added with another device file.
[    24.077] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    24.077] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.077] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.077] (**) AT Translated Set 2 keyboard: always reports core events
[    24.077] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    24.077] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    24.077] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    24.077] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    24.077] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    24.077] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    24.077] (**) Option "xkb_rules" "evdev"
[    24.077] (**) Option "xkb_model" "pc105"
[    24.077] (**) Option "xkb_layout" "sk"
[    24.077] (**) Option "xkb_variant" "qwerty"
[    24.078] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    24.078] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    24.078] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    24.078] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    24.078] (II) LoadModule: "synaptics"
[    24.078] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.092] (II) Module synaptics: vendor="X.Org Foundation"
[    24.092] compiled for 1.13.0, module version = 1.6.99
[    24.092] Module class: X.Org XInput Driver
[    24.092] ABI class: X.Org XInput driver, version 18.0
[    24.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    24.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.092] (**) Option "Device" "/dev/input/event8"
[    24.093] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    24.093] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    24.093] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    24.093] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    24.093] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    24.093] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    24.093] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.093] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.093] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[    24.093] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    24.093] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    24.093] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    24.093] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[    24.094] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    24.094] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    24.094] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    24.094] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    24.094] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.094] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    24.094] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    46.527] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    46.527] (II) NVIDIA(GPU-0):     Vision stereo.
[    46.527] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    46.527] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    46.527] (**) NVIDIA(0):     been enabled on all display devices.)
[    48.496] (II) XKB: reuse xkmfile /var/lib/xkb/server-A7FFCDB53C1334C4A79BCCAF6A8BD2BE630B82AE.xkm
[    74.501] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    74.502] (II) NVIDIA(GPU-0):     Vision stereo.
[    74.502] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    74.502] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    74.502] (**) NVIDIA(0):     been enabled on all display devices.)


[memnon.rhodes]

Neviem či to pomôže  ale keď vypnem program Blender tak celý kubuntu zamrzne  a to iste ak niečo robím v nastavený nVidia tak zamrzne... 

[memnon.rhodes]

Skušal som pre inštalovať ovládač na grafickú kartu.
Naištalovalo som ovladač podľa toho to návou - manualna instalacia:
http://www.linux-mint-czech.cz/jak-na-ovladac-graficke-karty-nvidia-310-19/
V priebehu instalacie mi vypisalo nejaké chyby, tu je výpis z nvidia-installer.log

Kód: [Vybrat]

-> Kernel messages:
[  435.278349]  [<c114a2b4>] ? __kmem_cache_shutdown+0xb4/0x240
[  435.278354]  [<c114a2d9>] __kmem_cache_shutdown+0xd9/0x240
[  435.278359]  [<c15f31d8>] ? mutex_lock+0x18/0x40
[  435.278364]  [<c1126433>] kmem_cache_destroy+0x43/0xe0
[  435.278461]  [<fa988203>] nvidia_exit_module+0x417/0x1214 [nvidia]
[  435.278466]  [<c10b6a89>] ? __stop_machine+0x99/0xd0
[  435.278471]  [<c10a69c0>] ? show_refcnt+0x30/0x30
[  435.278476]  [<c15f31d8>] ? mutex_lock+0x18/0x40
[  435.278481]  [<c10a7c9f>] sys_delete_module+0x11f/0x240
[  435.278486]  [<c11326f6>] ? vm_munmap+0x46/0x60
[  435.278491]  [<c15fc6cd>] sysenter_do_call+0x12/0x28
[  435.278494] INFO: Object 0xf3ea8000 @offset=0
[  435.278496] INFO: Object 0xf3eaa000 @offset=8192
[  435.278499] INFO: Object 0xf3eac000 @offset=16384
[  435.278501] kmem_cache_destroy kmalloc-8192: Slab cache still has objects
[  435.278504] Pid: 3585, comm: rmmod Tainted: PF   B      O 3.7.0-4-generic #12-Ubuntu
[  435.278507] Call Trace:
[  435.278511]  [<c11264c2>] kmem_cache_destroy+0xd2/0xe0
[  435.278609]  [<fa988203>] nvidia_exit_module+0x417/0x1214 [nvidia]
[  435.278614]  [<c10b6a89>] ? __stop_machine+0x99/0xd0
[  435.278619]  [<c10a69c0>] ? show_refcnt+0x30/0x30
[  435.278624]  [<c15f31d8>] ? mutex_lock+0x18/0x40
[  435.278629]  [<c10a7c9f>] sys_delete_module+0x11f/0x240
[  435.278634]  [<c11326f6>] ? vm_munmap+0x46/0x60
[  435.278638]  [<c15fc6cd>] sysenter_do_call+0x12/0x28
-> Installing both new and classic TLS OpenGL libraries.
-> Parsing log file:
-> done.
-> Validating previous installation:
-> Unable to access previously installed file '/usr/lib/xorg/modules/drivers/nvidia_drv.so' (No such file or directory).
-> Unable to access previously installed file '/usr/bin/nvidia-smi' (No such file or directory).
-> Unable to access previously installed file '/usr/share/man/man1/nvidia-smi.1.gz' (No such file or directory).
-> Unable to access previously installed file '/usr/bin/nvidia-xconfig' (No such file or directory).
-> Unable to access previously installed file '/usr/share/man/man1/nvidia-xconfig.1.gz' (No such file or directory).
-> The previously installed file '/usr/bin/nvidia-settings' has a different checksum (2439628332) than when it was installed (3340686277).  /usr/bin/nvidia-settings will not be uninstalled.
-> The previously installed file '/usr/share/man/man1/nvidia-settings.1.gz' has a different checksum (647287193) than when it was installed (887007641).  /usr/share/man/man1/nvidia-settings.1.gz will not be uninstalled.
-> Unable to access previously installed file '/usr/bin/nvidia-bug-report.sh' (No such file or directory).
-> Unable to access previously installed file '/etc/OpenCL/vendors/nvidia.icd' (No such file or directory).
-> Unable to access previously installed symlink '/usr/lib/libOpenCL.so' (No such file or directory).
-> Unable to access previously installed symlink '/usr/lib/vdpau/libvdpau_nvidia.so.1' (No such file or directory).
-> Unable to access previously installed symlink '/usr/lib/libvdpau_nvidia.so' (No such file or directory).
-> done.
WARNING: Your driver installation has been altered since it was initially installed; this may happen, for example, if you have since installed the NVIDIA driver through a mechanism other than nvidia-installer (such as your distribution's native package management system).  nvidia-installer will attempt to uninstall as best it can.  Please see the file '/var/log/nvidia-installer.log' for details.
-> Uninstalling NVIDIA Accelerated Graphics Driver for Linux-x86 (1.0-31019 (310.19)):
ERROR: Unable to create '/usr/lib/nvidia-current/libnvidia-glcore.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libnvidia-glcore.so.310.19'.
ERROR: Unable to create '/usr/lib/nvidia-current/xorg/libglx.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/xorg/libglx.so.310.19'.
-> Unable to restore symbolic link /usr/lib/nvidia-current/xorg/libglx.so -> libglx.so.310.19 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/libGL.so -> libGL.so.1 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/libGL.so.1 -> libGL.so.310.19 (No such file or directory).
ERROR: Unable to create '/usr/lib/nvidia-current/libGL.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libGL.so.310.19'.
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvidia-encode.so.1 -> libnvidia-encode.so.310.19 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvidia-compiler.so -> libnvidia-compiler.so.1 (No such file or directory).
ERROR: Unable to create '/usr/lib/nvidia-current/libcuda.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libcuda.so.310.19'.
ERROR: Unable to create '/usr/lib/nvidia-current/libnvidia-cfg.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libnvidia-cfg.so.310.19'.
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvidia-ml.so -> libnvidia-ml.so.1 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvcuvid.so.1 -> libnvcuvid.so.310.19 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvidia-cfg.so -> libnvidia-cfg.so.1 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvidia-ml.so.1 -> libnvidia-ml.so.310.19 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/vdpau/libvdpau_nvidia.so -> libvdpau_nvidia.so.1 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/vdpau/libvdpau_nvidia.so.1 -> libvdpau_nvidia.so.310.19 (No such file or directory).
ERROR: Unable to create '/usr/lib/nvidia-current/vdpau/libvdpau_nvidia.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/vdpau/libvdpau_nvidia.so.310.19'.
ERROR: Unable to create '/usr/lib/nvidia-current/xorg/nvidia_drv.so' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/xorg/nvidia_drv.so'.
ERROR: Unable to create '/usr/lib/nvidia-current/libnvidia-encode.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libnvidia-encode.so.310.19'.
-> Unable to restore symbolic link /usr/lib/nvidia-current/libcuda.so.1 -> libcuda.so.310.19 (No such file or directory).
ERROR: Unable to create '/usr/lib/nvidia-current/libnvcuvid.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libnvcuvid.so.310.19'.
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvidia-compiler.so.1 -> libnvidia-compiler.so.310.19 (No such file or directory).
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvcuvid.so -> libnvcuvid.so.1 (No such file or directory).
ERROR: Unable to create '/usr/lib/nvidia-current/libnvidia-ml.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libnvidia-ml.so.310.19'.
-> Unable to restore symbolic link /usr/lib/nvidia-current/libnvidia-cfg.so.1 -> libnvidia-cfg.so.310.19 (No such file or directory).
ERROR: Unable to create '/usr/lib/nvidia-current/libnvidia-compiler.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libnvidia-compiler.so.310.19'.
-> Unable to restore symbolic link /usr/lib/nvidia-current/libcuda.so -> libcuda.so.310.19 (No such file or directory).
ERROR: Unable to create '/usr/lib/nvidia-current/libnvidia-tls.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/libnvidia-tls.so.310.19'.
ERROR: Unable to create '/usr/lib/nvidia-current/tls/libnvidia-tls.so.310.19' for copying (No such file or directory)
WARNING: Unable to restore file '/usr/lib/nvidia-current/tls/libnvidia-tls.so.310.19'.
-> Unable to restore symbolic link /usr/bin/nvidia-settings -> /etc/alternatives/nvidia_settings (File exists).
-> Unable to restore symbolic link /usr/share/man/man1/nvidia-settings.1.gz -> /etc/alternatives/man_nvidiasettings.gz (File exists).
-> Unable to restore symbolic link /etc/OpenCL/vendors/nvidia.icd -> /etc/alternatives/i386-linux-gnu_nvidia.icd (No such file or directory).
WARNING: Failed to delete the directory '/usr/share/doc/NVIDIA_GLX-1.0' (Directory not empty).
-> Unable to delete directories created by previous installation.
-> done.
-> Uninstallation of existing driver: NVIDIA Accelerated Graphics Driver for Linux-x86 (310.19) is complete.
-> Searching for conflicting X files:
-> done.
-> Searching for conflicting OpenGL files:
-> done.
-> Installing 'NVIDIA Accelerated Graphics Driver for Linux-x86' (310.19):
   executing: '/sbin/ldconfig'...
   executing: '/sbin/depmod -aq'...
-> done.
-> Driver file installation is complete.
-> Running post-install sanity check:
-> done.
-> Post-install sanity check passed.
-> Shared memory test passed.
-> Running runtime sanity check:
-> done.
-> Runtime sanity check passed.
-> Would you like to run the nvidia-xconfig utility to automatically update your X configuration file so that the NVIDIA X driver will be used when you restart X?  Any pre-existing X configuration file will be backed up. (Answer: Yes)
-> Your X configuration file has been successfully updated.  Installation of the NVIDIA Accelerated Graphics Driver for Linux-x86 (version: 310.19) is now complete.
Ale stale zostáva problem, že mi počitač zamrzne ked vypnem blender alebo nastavenie nvidie....

[Cuore]

nekdo s nvidií snad poradí, každopádně toto

- pritom mi uplne zamrzol počitač

je špatně. Má ti to dát do výstupu buď Yes nebo No tzn. mám nebo nemám funkční akceleraci. Tohle jen potvrzuje chybně nainstalovaný ovladač. Kdyžtak pohledej tady na fóru ohledně různé instalace nvidia karet. Já bohužel mám ati a navíc uzavřený ovladač nepoužívám.

[beer]

Dle toho logu máš verzi nvidia 310.19? A pere se ti s nouveau, jak vidím?

Co takhle dát nouveau na blacklist, nebo odinstalovat.

Odinstalace:

Kód: [Vybrat]

sudo apt-get --purge remove xserver-xorg-video-nouveau

Kód: [Vybrat]

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
Ovladače bych instaloval z repozitáře, ne takto od někoho z dropboxu, jak je to v tom návodu uvedeno, to je dost nebezpečné, nikdy nevíš, co ti tam nasadí.

Kód: [Vybrat]

sudo add-apt-repository ppa:xorg-edgers/ppa

Kód: [Vybrat]

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install linux-headers-$(uname -r)
sudo apt-get install nvidia-current nvidia-settings
sudo nvidia-xconfig
sudo reboot


[Cuore]

já o vlku a Beer za dveřmi  přesně v někoho podobného jsem doufal, že poradí  otestuj a uvidíme

[memnon.rhodes]

Dle toho logu máš verzi nvidia 310.19? A pere se ti s nouveau, jak vidím?

Co takhle dát nouveau na blacklist, nebo odinstalovat.

Odinstalace:

Kód: [Vybrat]

sudo apt-get --purge remove xserver-xorg-video-nouveau

Kód: [Vybrat]

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
Ovladače bych instaloval z repozitáře, ne takto od někoho z dropboxu, jak je to v tom návodu uvedeno, to je dost nebezpečné, nikdy nevíš, co ti tam nasadí.

Kód: [Vybrat]

sudo add-apt-repository ppa:xorg-edgers/ppa

Kód: [Vybrat]

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install linux-headers-$(uname -r)
sudo apt-get install nvidia-current nvidia-settings
sudo nvidia-xconfig
sudo reboot


Salve, zatiaľ som to vyriešil tak, že som si pre-inštaloval Kubuntu na verziu 12.04... bez inštalácie ovládačov na grafiku - zatiaľ všetko funguje OK aj Blender... ale keď som skúšal nainštalovať Neslobodné ovládače tak to začalo nanovu - mrznúť ale nie tak drasticky ako pri 12.10, tak som odinštalovať ovládač.
Keď budem mať čas tak vyskúšam hore popísaný postup a potom dám vedieť ako som dopadol...