Zdravím,
po vyzkoušení Kubuntu 12.04 32 bit ve VB, jsem se rozhodl jej naistalovat na HD.
Mám dva disky:
první M SATA Arch
(instalace tohoto distra mě stála hoooodně hodin u PC
, již přes rok stará verze a změny které nastaly už nechci řešit)
druhý S ATA Win7
Přepínaní mezi OS jsem řesil kla. F8 při startu PC, default boot na Win7 (žena měla problém že winy nenaskočily hned
)
Po instalaci me Grub2 nezklamal, obnova z Live CD, žel bohu není vidět nabídka OS. Na monitoru se objeví
Input not Supported zhruba tak 30 s a pak
No Signal taky tak 30 s
pak se vypne monitor, zapne a naskočí Kubuntu, jo a před chvílí jsem zjistil že mě zamrzne PC. Teď to píšu z Debianu 5 co mám na flešce. Kubuntu jsem dal na ext4, takže se nedostanu k výpisu z bootinfoscript. Zkusim se nalogovat a dát sem ten výpis.
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid ea8ba8c3-91dd-45a0-9510-09a893ee0551 root
set prefix=($root)/boot/grub
---------------------------------------------------------------------------
-----.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /grldr /bootmgr /Boot/BCD
/Windows/System32/winload.exe /grldr
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 320.1 GB, 320072933376 bytes
hlav: 255, sektorů na stopu: 63, cylindrů: 38 913, celkem 625 142 448 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 39,070,079 39,070,017 83 Linux
/dev/sda2 39,070,080 245,360,744 206,290,665 83 Linux
/dev/sda3 245,360,745 612,221,084 366,860,340 83 Linux
/dev/sda4 612,221,146 625,137,344 12,916,199 5 Extended
/dev/sda5 612,221,148 625,137,344 12,916,197 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 200.0 GB, 200049647616 bytes
hlav: 255, sektorů na stopu: 63, cylindrů: 24 321, celkem 390 721 968 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 195,366,464 195,366,402 7 NTFS / exFAT / HPFS
/dev/sdb2 195,366,465 390,716,864 195,350,400 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 17c7905b-bdae-4dfc-a067-ebd18e414c37 ext4
/dev/sda2 dba56865-c8aa-4162-9cd3-af74f951194b ext4
/dev/sda3 e37baa18-fe71-4382-9c90-facb6dc5ac05 ext3
/dev/sda5 7C9B455F7B2F8BF8 ntfs
/dev/sdb1 A0E88D30E88D05AE ntfs
/dev/sdb2 637B5FD1416AEC7F ntfs Moje
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sda2 /home ext4 (rw)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 17c7905b-bdae-4dfc-a067-ebd18e414c37
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 17c7905b-bdae-4dfc-a067-ebd18e414c37
set locale_dir=($root)/boot/grub/locale
set lang=
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 75,75,75; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-35-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 17c7905b-bdae-4dfc-a067-ebd18e414c37
linux /boot/vmlinuz-3.2.0-35-generic-pae root=UUID=17c7905b-bdae-4dfc-a067-ebd18e414c37 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-35-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-35-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 17c7905b-bdae-4dfc-a067-ebd18e414c37
echo 'Loading Linux 3.2.0-35-generic-pae ...'
linux /boot/vmlinuz-3.2.0-35-generic-pae root=UUID=17c7905b-bdae-4dfc-a067-ebd18e414c37 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-35-generic-pae
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 17c7905b-bdae-4dfc-a067-ebd18e414c37
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=17c7905b-bdae-4dfc-a067-ebd18e414c37 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 17c7905b-bdae-4dfc-a067-ebd18e414c37
echo 'Loading Linux 3.2.0-29-generic-pae ...'
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=17c7905b-bdae-4dfc-a067-ebd18e414c37 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 17c7905b-bdae-4dfc-a067-ebd18e414c37
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 17c7905b-bdae-4dfc-a067-ebd18e414c37
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root A0E88D30E88D05AE
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb1 during installation
UUID=17c7905b-bdae-4dfc-a067-ebd18e414c37 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb2 during installation
UUID=dba56865-c8aa-4162-9cd3-af74f951194b /home ext4 defaults 0 2
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-29-generic-pae 2
= boot/initrd.img-3.2.0-35-generic-pae 2
= boot/vmlinuz-3.2.0-29-generic-pae 1
= boot/vmlinuz-3.2.0-35-generic-pae 2
= initrd.img 2
= initrd.img.old 2
= vmlinuz 2
= vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda4
00000000 80 4e 02 69 7a a5 79 49 d4 81 cf de 5c fa 70 5a |.N.iz.yI....\.pZ|
00000010 95 53 2b 95 cd 93 f6 57 05 ac e3 4c 2f d1 5b 98 |.S+....W...L/.[.|
00000020 dc f7 73 5f 73 b3 36 ca 7b 53 53 8b d8 54 81 a3 |..s_s.6.{SS..T..|
00000030 8f 96 fa 25 2f bd 9f 7d f4 5b 4d bc 8b 8d b2 4a |...%/..}.[M....J|
00000040 97 9f a3 59 17 b4 83 c7 85 38 d3 fe 93 44 73 c6 |...Y.....8...Ds.|
00000050 c8 f7 e4 2f d5 89 59 d5 5f 00 95 53 ee 36 ab 95 |.../..Y._..S.6..|
00000060 b8 7d 10 ff 19 55 ef cf c0 32 31 ca c0 80 f7 53 |.}...U...21....S|
00000070 26 c7 22 e1 84 b5 03 24 7f 91 91 a2 62 4e 43 df |&."....$....bNC.|
00000080 0c e4 79 19 6b 73 ab f8 8d cd 3f 5c 33 fd 14 f2 |..y.ks....?\3...|
00000090 27 37 32 ab 1e 93 0f 66 71 aa f9 1a b2 5d 87 1e |'72....fq....]..|
000000a0 46 7d cf 14 eb c4 c1 8f da d6 21 38 97 39 b5 93 |F}........!8.9..|
000000b0 df cb 52 8d 00 d9 a6 53 c1 c0 83 83 6b 03 ca 81 |..R....S....k...|
000000c0 e3 80 6e e3 68 c6 f6 9e 1c 82 98 7e a3 18 c6 54 |..n.h......~...T|
000000d0 fb c3 6c d1 10 50 6e a4 fa af c5 28 c2 68 78 c3 |..l..Pn....(.hx.|
000000e0 ed f1 53 4f 67 e9 3b d4 dc 4e 8b 79 e7 ae b7 98 |..SOg.;..N.y....|
000000f0 66 c3 a7 0e a0 31 32 5d 13 be 74 6a 9d de 19 9c |f....12]..tj....|
00000100 e1 2a 41 1b e4 3c f6 1d 3e cd 80 e0 05 40 42 2e |.*A..<..>....@B.|
00000110 5d e9 7b 07 c2 52 ff 8f b3 86 4d a1 ab 1c e9 23 |].{..R....M....#|
00000120 54 52 0c e4 f7 43 f0 f3 84 f6 73 9c e9 7d d2 eb |TR...C....s..}..|
00000130 2d 7b f6 f2 57 dd 6b 67 5f 6b 38 c7 4e 3e 9e 18 |-{..W.kg_k8.N>..|
00000140 c6 3d 62 fd 48 02 c4 cb 11 23 69 12 6a c1 ca 79 |.=b.H....#i.j..y|
00000150 4b 3a 1f 52 d0 fc 52 e2 10 6c 73 04 91 d2 aa c2 |K:.R..R..ls.....|
00000160 f6 0e 83 1c 54 07 23 c8 f3 28 ea 6d 56 5c ac b8 |....T.#..(.mV\..|
00000170 bf ea a0 ec f7 61 37 98 ff e3 3c 70 1d 51 25 79 |.....a7...<p.Q%y|
00000180 19 37 15 57 82 13 9e 3d 6f a6 cc a6 23 80 5a ef |.7.W...=o...#.Z.|
00000190 a1 97 f0 e9 1c cf 52 d7 3b 8e 53 28 19 1d 93 79 |......R.;.S(...y|
000001a0 44 8f 93 76 1d 05 3b ab b9 4b dc f9 7c f6 6d ce |D..v..;..K..|.m.|
000001b0 1e 11 0b c0 f7 74 7d 9f f8 17 89 85 98 24 00 01 |.....t}......$..|
000001c0 c1 fe 07 57 c6 fe 02 00 00 00 e5 15 c5 00 00 00 |...W............|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Komprimovaná data jsou poškozená
xz: (stdin): Komprimovaná data jsou poškozená
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
Téma: Grub2 nabidka není vidět [vyřešeno] (Přečteno 1430 krát)