Nefunguje ani jedno USB(notebook)

[mrkrenek]

Dnes po 5ti minutách používání notebooku z baterky se myš vypla.
Z elektriky funguje, zatím..

[Rover623]

Pro vyřešení by to asi opravdu chtělo dát tam novější BIOS, pokud je nějaký k dispozici. Obvykle to není těžké, můžu se na to podívat co HP pro tento notebook nabízí, ale potřeboval bych vědět přesný model + verzi BIOSu

[mrkrenek]

Tak je to HP compaq nc6120, verze biosu 1.15
Teďka nefunguje myška a externí disk jenom na USB funguje

[Rover623]

Já mám trochu problém, nemůžu moc psát, včera jsem si totálně zničil levou ruku, nicméně k tomu notebooku už jsem něco pohledal.

HP opět nezklamalo, bezproblémový update BIOSu je možný pouze z Windows, ostatní metody jsou poměrně komplikované a jak už to tak bývá dělat update BIOSu na používaných Windows, to zavání průšvihem, takže aby si k tomu ještě člověk nainstaloval čistý systém.

Poslední verze BIOSu na stránkách HP je označena jako F.14 a je z 27.7.2006

Na tu myš zkus ještě tohle

Kód: [Vybrat]

sudo echo 'ACTION=="add", SUBSYSTEM=="usb", TEST=="power/control" ATTR{power/control}="on"' >/etc/udev/rules.d/usb_power_save.rules

[jadd]

V nastavení BIOSu problém není? Vlákno jsem prošel a nevšiml jsem si.
Sestře jsem aktualizoval BIOS na HP620 z běžících WXP bez problémů.

[mrkrenek]

honza@honza-HP-Compaq-nc6120-PY507EA-AKB:~$ sudo echo 'ACTION=="add", SUBSYSTEM=="usb", TEST=="power/control" ATTR{power/control}="on"' >/etc/udev/rules.d/usb_power_save.rules
bash: /etc/udev/rules.d/usb_power_save.rules: Operace zamítnuta

Na heslo su se to ani nezeptalo..

[jadd]

protože tím myslel, že se to přidá do souboru kde jsou existující podadresáře, zkontroluj to.

[mrkrenek]

v tom případě usb_power_save.rules v tý složce vůbec není.
Je tam jenom 70-prersistent cd, net a readme. Toť vše. Vytvořit file tam na klikačku nejde.

[jadd]

máš pravdu, zřejmě to bude mít potíže s oprávněním pro /etc/sudoers
musíš se stát adminem (root)

Kód: [Vybrat]

sudo -i

Kód: [Vybrat]

echo 'ACTION=="add", SUBSYSTEM=="usb", TEST=="power/control" ATTR\{power/control\}="on"' > /etc/udev/rules.d/80-usb-power-save.rules

Kód: [Vybrat]

exitčíslo 80 jsem zvolil aby bylo poznat co tam bylo dáno naposledy, a také se z toho bude naposledy číst.

[mrkrenek]

Ten file už tam je, chceš po mě nějaký výpis ?
btw, myška pořád nic

[jadd]

ne já s tím nezačal, jen jsem ti upřesnil .. mám omezené kapacity

[mrkrenek]

ne já s tím nezačal, jen jsem ti upřesnil .. mám omezené kapacity

Jo takhle , ale děkuju

[Rover623]

Zkus tomu souboru ještě přidělit spustitelný příznak

[jadd]

Zkus tomu souboru ještě přidělit spustitelný příznak

obávám se, že ani to nepomůže, teď jsem si všiml, že tam má můj experiment, když jsem zjišťoval proč to nejde..

echo 'ACTION=="add", SUBSYSTEM=="usb", TEST=="power/control" ATTR\{power/control\}="on"' > /etc/udev/rules.d/80-usb-power-save.rules

Kód: [Vybrat]

echo 'ACTION=="add", SUBSYSTEM=="usb", TEST=="power/control" ATTR{power/control}="on"' > /etc/udev/rules.d/80-usb-power-save.rulesty escape znaky před složenýma závorkama, teď to je správně, jak to chtěl Rover623, takže znovu ono se to přepíše

[mrkrenek]

ani tohle nepomohlo..
opět přidávám dmesg

Kód: [Vybrat]

[    1.065405] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.065412] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.109033] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.109065] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.109096] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.109233] mousedev: PS/2 mouse device common for all mice
[    1.109420] rtc_cmos 00:08: RTC can wake from S4
[    1.109564] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.109611] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.109679] device-mapper: uevent: version 1.0.3
[    1.109759] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.109784] EISA: Probing bus 0 at eisa.0
[    1.109792] Cannot allocate resource for EISA slot 1
[    1.109794] Cannot allocate resource for EISA slot 2
[    1.109796] Cannot allocate resource for EISA slot 3
[    1.109799] Cannot allocate resource for EISA slot 4
[    1.109810] Cannot allocate resource for EISA slot 7
[    1.109816] EISA: Detected 0 cards.
[    1.109862] cpuidle: using governor ladder
[    1.109901] cpuidle: using governor menu
[    1.109904] EFI Variables Facility v0.08 2004-May-17
[    1.110109] ashmem: initialized
[    1.110279] TCP: cubic registered
[    1.110423] NET: Registered protocol family 10
[    1.110670] NET: Registered protocol family 17
[    1.110684] Key type dns_resolver registered
[    1.110803] Using IPI No-Shortcut mode
[    1.110907] PM: Hibernation image not present or could not be loaded.
[    1.110924] registered taskstats version 1
[    1.113632] Key type trusted registered
[    1.115732] Key type encrypted registered
[    1.118262]   Magic number: 9:155:12
[    1.118418] rtc_cmos 00:08: setting system clock to 2013-08-22 05:01:09 UTC (1377147669)
[    1.122655] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.122657] EDD information not available.
[    1.210417] isapnp: No Plug & Play device found
[    1.211049] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.224362] ata1.00: ATA-6: ST9808211A, 3.02, max UDMA/100
[    1.224366] ata1.00: 156301488 sectors, multi 16: LBA48
[    1.224373] ata1.01: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CC15, max MWDMA2
[    1.238502] ACPI: Battery Slot [C174] (battery present)
[    1.240279] ata1.00: configured for UDMA/100
[    1.256279] ata1.01: configured for MWDMA2
[    1.258762] scsi 0:0:0:0: Direct-Access     ATA      ST9808211A       3.02 PQ: 0 ANSI: 5
[    1.258942] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.259044] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.259103] sd 0:0:0:0: [sda] Write Protect is off
[    1.259107] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.259133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.313597]  sda: sda1 sda2 < sda5 >
[    1.313932] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.317954] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RW GWA-4082N CC15 PQ: 0 ANSI: 5
[    1.323110] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.323114] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.323236] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.323300] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.323408] Freeing unused kernel memory: 760k freed
[    1.323800] Write protecting the kernel text: 6056k
[    1.323822] Write protecting the kernel read-only data: 2480k
[    1.323824] NX-protecting the kernel data: 4184k
[    1.342405] udevd[90]: starting version 175
[    1.560060] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    1.578277] sdhci: Secure Digital Host Controller Interface driver
[    1.578283] sdhci: Copyright(c) Pierre Ossman
[    1.578619] sdhci-pci 0000:02:06.4: SDHCI controller found [104c:8034] (rev 0)
[    1.578710] mmc0: no vmmc regulator found
[    1.578747] Registered led device: mmc0::
[    1.615102] mmc0: SDHCI controller on PCI [0000:02:06.4] using PIO
[    1.615157] mmc1: no vmmc regulator found
[    1.615203] Registered led device: mmc1::
[    1.644058] mmc1: SDHCI controller on PCI [0000:02:06.4] using PIO
[    1.644103] mmc2: no vmmc regulator found
[    1.644149] Registered led device: mmc2::
[    1.676604] mmc2: SDHCI controller on PCI [0000:02:06.4] using PIO
[    1.676765] tg3.c:v3.123 (March 21, 2012)
[    1.743334] tg3 0000:02:0e.0: eth0: Tigon3 [partno(BCM95705A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:14:c2:dd:ce:3c
[    1.743342] tg3 0000:02:0e.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0])
[    1.743346] tg3 0000:02:0e.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.743349] tg3 0000:02:0e.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[    1.767676] usb 2-2: New USB device found, idVendor=04b3, idProduct=310c
[    1.767682] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.767686] usb 2-2: Product: USB Optical Mouse
[    1.797116] firewire_ohci 0000:02:06.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.812905] usbcore: registered new interface driver usbhid
[    1.812908] usbhid: USB HID core driver
[    1.823378] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[    1.824100] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[    1.982576] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.296159] firewire_core 0000:02:06.2: created device fw0: GUID 718b500029314ca6, S400
[   16.867071] Adding 1562620k swap on /dev/sda5.  Priority:-1 extents:1 across:1562620k
[   16.880035] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.920408] udevd[336]: starting version 175
[   16.999337] lp: driver loaded but no devices found
[   17.069159] ACPI: Video Device [C055] (multi-head: yes  rom: no  post: no)
[   17.072314] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   17.168755] [drm] Initialized drm 1.1.0 20060810
[   17.184954] wmi: Mapper loaded
[   17.234925] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.390210] i915 0000:00:02.0: setting latency timer to 64
[   17.391449] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   17.391454] [drm] Driver supports precise vblank timestamp query.
[   17.457530] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   17.499704] parport_pc 00:04: reported by Plug and Play ACPI
[   17.499788] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   17.501797] irda_init()
[   17.501814] NET: Registered protocol family 23
[   17.527096] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x004e): LPC47N227
[   17.527120] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 3, mode: 0x0e
[   17.527127] smsc_ircc_present: can't get sir_base of 0x3e8
[   17.538674] intel_rng: FWH not detected
[   17.556426] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:099c]
[   17.556453] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[   17.556460] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[   17.556463] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   17.556471] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[   17.556567] lib80211: common routines for IEEE802.11 drivers
[   17.556570] lib80211_crypt: registered algorithm 'NULL'
[   17.582760] cfg80211: Calling CRDA to update world regulatory domain
[   17.600254] lp0: using parport0 (interrupt-driven).
[   17.601443] libipw: 802.11 data/management/control stack, git-1.1.13
[   17.601446] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   17.602814] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   17.602817] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   17.644178] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[   17.738858] type=1400 audit(1377147686.115:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=569 comm="apparmor_parser"
[   17.741130] type=1400 audit(1377147686.119:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=569 comm="apparmor_parser"
[   17.741462] type=1400 audit(1377147686.119:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=569 comm="apparmor_parser"
[   17.788997] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[   17.789005] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   17.789014] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   17.789018] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
[   17.790311]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff
[   17.853139] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd03fffff]
[   17.853146] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd03fffff:
[   17.853151]  excluding 0xd0000000-0xd003ffff
[   17.853168] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x67ffffff pref]
[   17.853171] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x67ffffff:
[   17.853185]  excluding 0x60000000-0x67ffffff
[   17.891530] Bluetooth: Core ver 2.16
[   17.891550] NET: Registered protocol family 31
[   17.891551] Bluetooth: HCI device and connection manager initialized
[   17.891552] Bluetooth: HCI socket layer initialized
[   17.891553] Bluetooth: L2CAP socket layer initialized
[   17.891557] Bluetooth: SCO socket layer initialized
[   17.903437] [drm] initialized overlay support
[   17.912119] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:099c]
[   17.912149] yenta_cardbus 0000:02:06.1: Using CSCINT to route CSC interrupts to PCI
[   17.912152] yenta_cardbus 0000:02:06.1: Routing CardBus interrupts to PCI
[   17.912159] yenta_cardbus 0000:02:06.1: TI: mfunc 0x01aa1b22, devctl 0x64
[   17.923312] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.923318] Bluetooth: BNEP filters: protocol multicast
[   17.966888] Bluetooth: RFCOMM TTY layer initialized
[   17.966902] Bluetooth: RFCOMM socket layer initialized
[   17.966904] Bluetooth: RFCOMM ver 1.11
[   18.103621] init: failsafe main process (702) killed by TERM signal
[   18.147043] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0c78, PCI irq 19
[   18.147052] yenta_cardbus 0000:02:06.1: Socket status: 30000006
[   18.147057] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[   18.147069] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   18.147073] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x4fff:
[   18.246508] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0
[   18.246519] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[   18.304602] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   18.305140] ppdev: user-space parallel port driver
[   18.390573] type=1400 audit(1377147686.767:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=796 comm="apparmor_parser"
[   18.406874] type=1400 audit(1377147686.783:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=798 comm="apparmor_parser"
[   18.407355] type=1400 audit(1377147686.783:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=798 comm="apparmor_parser"
[   18.412829] type=1400 audit(1377147686.791:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=796 comm="apparmor_parser"
[   18.439155] type=1400 audit(1377147686.815:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=807 comm="apparmor_parser"
[   18.439736] type=1400 audit(1377147686.815:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=807 comm="apparmor_parser"
[   18.211770]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff
[   18.456481] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd03fffff]
[   18.456490] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0000000-0xd03fffff:
[   18.456494]  excluding 0xd0000000-0xd003ffff
[   18.456511] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x60000000-0x67ffffff pref]
[   18.456514] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x67ffffff:
[   18.456528]  excluding 0x60000000-0x67ffffff
[   18.456675] type=1400 audit(1377147686.835:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=807 comm="apparmor_parser"
[   18.501196] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   18.655000] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   18.686676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   18.687665]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[   18.694261] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   18.694604]  excluding 0x3e8-0x3ff 0x4d0-0x4d7
[   18.694943] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   18.695518]  clean.
[   18.695536] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   18.723818] cfg80211: World regulatory domain updated:
[   18.723825] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.723828] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.723831] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.723833] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.723836] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.723839] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.724790] input: HP WMI hotkeys as /devices/virtual/input/input7
[   19.047476]  clean.
[   19.047529] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   19.047535]  excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[   19.047566] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   19.047583]  clean.
[   19.047600] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   19.047615]  excluding 0x60000000-0x60ffffff
[   19.047635] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   19.061036] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[   19.062026]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[   19.062742] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
[   19.072071]  clean.
[   19.170903]  excluding 0x3e8-0x3ff 0x4d0-0x4d7
[   19.171281] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[   19.171857]  clean.
[   19.171875] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[   19.184578]  clean.
[   19.184627] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[   19.184632]  excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[   19.184663] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[   19.184681]  clean.
[   19.184698] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[   19.184712]  excluding 0x60000000-0x60ffffff
[   19.184732] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[   19.185390]  clean.
[   19.207158] fbcon: inteldrmfb (fb0) is primary device
[   19.209854] Console: switching to colour frame buffer device 128x48
[   19.209896] fb0: inteldrmfb frame buffer device
[   19.209899] drm: registered panic notifier
[   19.209912] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.209958] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \_SB_.C002.C003.C08F 1 (20120320/utaddress-251)
[   19.209965] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.209968] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   19.209972] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C002.C003.C086 1 (20120320/utaddress-251)
[   19.209977] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.209981] ACPI Warning: 0x00001100-0x0000113f SystemIO conflicts with Region \_SB_.C002.C003.C097 1 (20120320/utaddress-251)
[   19.209986] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.209988] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   19.212792] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[   19.483689] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   19.483695] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483698] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   19.483701] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483703] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   19.483706] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483708] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   19.483711] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483714] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   19.483716] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483719] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   19.483721] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483724] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   19.483727] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483729] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   19.483732] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483734] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   19.483737] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483739] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   19.483742] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483745] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   19.483747] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.483750] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   19.483753] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.483755] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   19.483758] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.483760] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   19.483763] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.515485] init: alsa-restore main process (895) terminated with status 19
[   19.655076] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.655655] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[   19.669325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.208039] intel8x0_measure_ac97_clock: measured 55488 usecs (2673 samples)
[   20.208046] intel8x0: clocking to 48000
[   20.550495] lib80211_crypt: registered algorithm 'TKIP'
[  394.788374] audit_printk_skb: 39 callbacks suppressed
[  394.788386] type=1400 audit(1377148062.274:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=805 comm="cupsd" pid=805 comm="cupsd" capability=36  capname="block_suspend"
[ 2154.034558] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[ 2160.079371] PM: Syncing filesystems ... done.
[ 2160.090429] PM: Preparing system for mem sleep
[ 2160.161441] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2160.176186] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2160.192076] PM: Entering mem sleep
[ 2160.192097] Suspending console(s) (use no_console_suspend to debug)
[ 2160.192772] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2160.212773] sd 0:0:0:0: [sda] Stopping disk
[ 2160.242068] parport_pc 00:04: disabled
[ 2160.242529] serial 00:02: disabled
[ 2160.242962] ACPI handle has no context!
[ 2160.242972] ACPI handle has no context!
[ 2160.243048] ACPI handle has no context!
[ 2160.243079] eth1: Going into suspend...
[ 2162.483191] PM: suspend of drv:sd dev:0:0:0:0 complete after 2290.416 msecs
[ 2162.483209] PM: suspend of drv:scsi dev:target0:0:0 complete after 2290.352 msecs
[ 2162.483218] PM: suspend of drv:scsi dev:host0 complete after 2242.232 msecs
[ 2162.483262] PM: suspend of drv: dev:ata1 complete after 2240.458 msecs
[ 2162.483316] PM: suspend of drv:ata_piix dev:0000:00:1f.1 complete after 2240.197 msecs
[ 2162.483326] PM: suspend of drv: dev:pci0000:00 complete after 2239.374 msecs
[ 2162.483333] PM: suspend of devices complete after 2291.017 msecs
[ 2162.483335] PM: suspend devices took 2.288 seconds
[ 2162.483599] PM: late suspend of devices complete after 0.260 msecs
[ 2162.484329] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 2162.500087] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
[ 2162.500145] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[ 2162.500202] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 2162.500259] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 2162.500399] PM: noirq suspend of devices complete after 16.797 msecs
[ 2162.500563] ACPI: Preparing to enter system sleep state S3
[ 2162.500699] PM: Saving platform NVS memory
[ 2162.500789] Disabling non-boot CPUs ...
[ 2162.500789] ACPI: Low-level resume complete
[ 2162.500789] PM: Restoring platform NVS memory
[ 2162.500789] Force enabled HPET at resume
[ 2162.500789] ACPI: Waking up from system sleep state S3
[ 2162.629872] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 2162.629936] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 2162.629999] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 2162.630061] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
[ 2162.630114] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 2162.631649] PM: noirq resume of devices complete after 2.141 msecs
[ 2162.631814] PM: early resume of devices complete after 0.104 msecs
[ 2162.631896] i915 0000:00:02.0: setting latency timer to 64
[ 2162.670738] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2162.670763] usb usb2: root hub lost power or was reset
[ 2162.670780] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2162.670803] usb usb3: root hub lost power or was reset
[ 2162.670820] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2162.670843] usb usb4: root hub lost power or was reset
[ 2162.670860] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2162.670883] usb usb5: root hub lost power or was reset
[ 2162.670902] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2162.670928] pci 0000:00:1e.0: setting latency timer to 64
[ 2162.670942] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 2162.670980] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2162.670987] eth1: Coming out of suspend...
[ 2162.671094] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[ 2162.674041] ata1.01: _GTF evaluation failed (AE 0x1001)
[ 2162.674093] ata2: port disabled--ignoring
[ 2162.803611] PM: resume of drv:hub dev:1-0:1.0 complete after 129.483 msecs
[ 2162.803699] PM: resume of drv: dev:ep_00 complete after 129.563 msecs
[ 2162.803705] PM: resume of drv: dev:ep_81 complete after 129.575 msecs
[ 2162.836093] PM: resume of drv:hub dev:3-0:1.0 complete after 133.852 msecs
[ 2162.836099] PM: resume of drv: dev:ep_00 complete after 133.824 msecs
[ 2162.836103] PM: resume of drv:hub dev:4-0:1.0 complete after 133.789 msecs
[ 2162.836109] PM: resume of drv: dev:ep_00 complete after 101.821 msecs
[ 2162.836113] PM: resume of drv: dev:ep_81 complete after 133.855 msecs
[ 2162.836117] PM: resume of drv: dev:ep_81 complete after 101.842 msecs
[ 2162.904072] PM: resume of drv:hub dev:5-0:1.0 complete after 163.257 msecs
[ 2162.904078] PM: resume of drv: dev:ep_00 complete after 163.229 msecs
[ 2162.904082] PM: resume of drv: dev:ep_81 complete after 163.250 msecs
[ 2162.908070] PM: resume of drv:hub dev:2-0:1.0 complete after 233.872 msecs
[ 2162.908076] PM: resume of drv: dev:ep_00 complete after 205.879 msecs
[ 2162.908080] PM: resume of drv:usb dev:2-2 complete after 104.368 msecs
[ 2162.908100] PM: resume of drv: dev:ep_81 complete after 233.899 msecs
[ 2162.964885] serial 00:02: activated
[ 2162.966502] parport_pc 00:04: activated
[ 2163.168070] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 2163.300082] firewire_core 0000:02:06.2: rediscovered device fw0
[ 2163.484216] PM: resume of drv:usbhid dev:2-2:1.0 complete after 680.495 msecs
[ 2163.484222] PM: resume of drv: dev:ep_00 complete after 680.465 msecs
[ 2163.484226] PM: resume of drv: dev:ep_81 complete after 680.487 msecs
[ 2164.596395] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2164.596398] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 2164.596401] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2164.596404] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2164.596590] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 2164.620278] ata1.00: configured for UDMA/100
[ 2164.636275] ata1.01: configured for MWDMA2
[ 2164.745588] PM: resume of drv:scsi dev:host0 complete after 2071.511 msecs
[ 2164.745599] PM: resume of drv:ata_port dev:ata1 complete after 1778.582 msecs
[ 2164.747254] PM: resume of drv:scsi_host dev:host0 complete after 2073.147 msecs
[ 2164.747259] PM: resume of drv:scsi dev:target0:0:0 complete after 2006.395 msecs
[ 2164.747266] PM: resume of drv:scsi dev:target0:0:1 complete after 2006.345 msecs
[ 2164.747272] PM: resume of drv:sd dev:0:0:0:0 complete after 2006.389 msecs
[ 2164.747276] sd 0:0:0:0: [sda] Starting disk
[ 2164.747283] PM: resume of drv:sr dev:0:0:1:0 complete after 1943.663 msecs
[ 2164.747290] PM: resume of drv:scsi_device dev:0:0:1:0 complete after 1943.584 msecs
[ 2164.778225] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2037.316 msecs
[ 2165.078999] PM: resume of devices complete after 2447.176 msecs
[ 2165.079180] PM: resume devices took 2.448 seconds
[ 2165.079279] PM: Finishing wakeup.
[ 2165.079281] Restarting tasks ... done.
[ 2165.125656] video LNXVIDEO:00: Restoring backlight state
[ 2167.038383] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2167.240200] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2168.506125] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2500.423201] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2500.438649] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2500.521411] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 2500.636130] QNX4 filesystem 0.2.3 registered.
[ 2500.702643] Btrfs loaded
[ 2550.036005] uhci_hcd 0000:00:1d.0: host controller process error, something bad happened!
[ 2550.036020] uhci_hcd 0000:00:1d.0: host controller halted, very bad!
[ 2550.036044] uhci_hcd 0000:00:1d.0: HC died; cleaning up
[ 2550.036092] usb 2-2: USB disconnect, device number 2
honza@honza-HP-Compaq-nc6120-PY507EA-AKB:~$


[jadd]

změň verzi jádra,
jo a ještě něco v prvních příspěvcích si nesplnil rady jako vyndat akumulátor, psals jen o vyndaném napájení.
Sice tohle jsem potřeboval jen když se mi nechtěl zapnout laptop a ono to stejně asi nepomůže ale ..
A co to nastavení biosu, nevrátilo se z ničeho nic na výchozí hodnoty položky ovlivňující usb porty.
Co já vím co máš v biosu..

[mrkrenek]

co tak koukám do biosu tak by mohlo bejt k věci je
USB legacy support - enable
parallel port mode - ecp
intel execution disable - enabled