Nvidia GT635 M ovladače

[Triscal]

Ahoj,
momentálně se mi podařilo uvést svůj ntb ve stav nečinný
Mám dvě gravické karty, intel a nvidii gt635M,  po nové instalaci systému jsem nainstaloval ovladače na nvidii podle tohoto návodu http://forum.ubuntu.cz/index.php?topic=71459.msg514782#msg514782 a vše fungovalo jedna báseň.

Dnes jsem však spustil intel-linux-graphic-installer, který aktualizoval 27 balíků (bohužel nevím kterých ani jak to zjistit) a taky jsem se pokusil nainstalovat wine (bezúspěšně), při instalaci wine mi to vyhodilo hlášku, že koliduje s nějakým balíkem, který začínal na jméno nvidia, ale nevěnoval jsem tomu pozornost, takže bohužel nevím, který to je (instaloval jsem přes centrum softwaru).

Po restartu, počítač zamrzne na černé obrazovce, kde chvíli bliká kurzor a následně blikat přestane, od té doby nereaguje na nic, pomáhá jedině tvrdý restart. Zprovoznit počítač opět nebyl problém, z recovery modu jsem odinstalovat vše, co začínalo na nvidia, ale od té doby se mi již nvidii rozchodit nepodařilo (pokaždé když jsem nainstaloval ovladače na nvidii, došel jsem ke stejnému výsledku). Netuším, který nebo které balíky by v tom mohli dělat takový zmatek.

Napadá vás někoho něco?

Běžím na ubutnu 14.04

Když na to přijde, je možné systém reinstalovat, ale nechce se mi to zase dělat, navíc dělat to pokaždé, když se to takhle sesype není nejlepší řešení.

Díky moc


Tady je xorg.log (v logech se vůbec nevyznám, ale řekl bych, že tento je ze spuštění aktuálního, ale neviděl jsem žádný log, který by byl ze spuštění při restartu s nainstalovanými nvidia ovladači)

Kód: [Vybrat]

[    16.309]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    16.309] X Protocol Version 11, Revision 0
[    16.309] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[    16.309] Current Operating System: Linux simon-K55VJ 3.13.0-35-generic #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 x86_64
[    16.309] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=0f9f33f0-16f4-4525-a8c8-022bba148370 ro quiet splash vt.handoff=7
[    16.309] Build Date: 30 July 2014  12:21:54AM
[    16.309] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support)
[    16.309] Current version of pixman: 0.30.2
[    16.309] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    16.309] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.309] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep  9 22:00:04 2014
[    16.349] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.350] (==) No Layout section.  Using the first Screen section.
[    16.350] (==) No screen section available. Using defaults.
[    16.350] (**) |-->Screen "Default Screen Section" (0)
[    16.350] (**) |   |-->Monitor "<default monitor>"
[    16.350] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    16.350] (==) Automatically adding devices
[    16.350] (==) Automatically enabling devices
[    16.350] (==) Automatically adding GPU devices
[    16.350] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    16.350] Entry deleted from font path.
[    16.350] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    16.350] Entry deleted from font path.
[    16.350] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    16.350] Entry deleted from font path.
[    16.350] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    16.350] Entry deleted from font path.
[    16.350] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    16.350] Entry deleted from font path.
[    16.350] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    16.350] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    16.350] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.350] (II) Loader magic: 0x7ffb5a6a8d40
[    16.350] (II) Module ABI versions:
[    16.350] X.Org ANSI C Emulation: 0.4
[    16.350] X.Org Video Driver: 15.0
[    16.350] X.Org XInput driver : 20.0
[    16.350] X.Org Server Extension : 8.0
[    16.350] (II) xfree86: Adding drm device (/dev/dri/card0)
[    16.351] (--) PCI:*(0:0:2:0) 8086:0166:1043:1447 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    16.351] (--) PCI: (0:1:0:0) 10de:0de3:1043:1447 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    16.351] Initializing built-in extension Generic Event Extension
[    16.351] Initializing built-in extension SHAPE
[    16.351] Initializing built-in extension MIT-SHM
[    16.351] Initializing built-in extension XInputExtension
[    16.351] Initializing built-in extension XTEST
[    16.351] Initializing built-in extension BIG-REQUESTS
[    16.351] Initializing built-in extension SYNC
[    16.351] Initializing built-in extension XKEYBOARD
[    16.351] Initializing built-in extension XC-MISC
[    16.351] Initializing built-in extension SECURITY
[    16.351] Initializing built-in extension XINERAMA
[    16.351] Initializing built-in extension XFIXES
[    16.351] Initializing built-in extension RENDER
[    16.351] Initializing built-in extension RANDR
[    16.351] Initializing built-in extension COMPOSITE
[    16.351] Initializing built-in extension DAMAGE
[    16.351] Initializing built-in extension MIT-SCREEN-SAVER
[    16.351] Initializing built-in extension DOUBLE-BUFFER
[    16.351] Initializing built-in extension RECORD
[    16.351] Initializing built-in extension DPMS
[    16.351] Initializing built-in extension Present
[    16.351] Initializing built-in extension DRI3
[    16.351] Initializing built-in extension X-Resource
[    16.351] Initializing built-in extension XVideo
[    16.351] Initializing built-in extension XVideo-MotionCompensation
[    16.351] Initializing built-in extension SELinux
[    16.351] Initializing built-in extension XFree86-VidModeExtension
[    16.351] Initializing built-in extension XFree86-DGA
[    16.351] Initializing built-in extension XFree86-DRI
[    16.351] Initializing built-in extension DRI2
[    16.351] (II) LoadModule: "glx"
[    16.382] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.855] (II) Module glx: vendor="X.Org Foundation"
[    16.855] compiled for 1.15.1, module version = 1.0.0
[    16.855] ABI class: X.Org Server Extension, version 8.0
[    16.855] (==) AIGLX enabled
[    16.855] Loading extension GLX
[    16.855] (==) Matched intel as autoconfigured driver 0
[    16.855] (==) Matched intel as autoconfigured driver 1
[    16.855] (==) Matched modesetting as autoconfigured driver 2
[    16.855] (==) Matched fbdev as autoconfigured driver 3
[    16.855] (==) Matched vesa as autoconfigured driver 4
[    16.855] (==) Assigned the driver to the xf86ConfigLayout
[    16.855] (II) LoadModule: "intel"
[    16.870] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.959] (II) Module intel: vendor="X.Org Foundation"
[    16.959] compiled for 1.15.1, module version = 2.99.911
[    16.959] Module class: X.Org Video Driver
[    16.959] ABI class: X.Org Video Driver, version 15.0
[    16.959] (II) LoadModule: "modesetting"
[    16.959] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    17.001] (II) Module modesetting: vendor="X.Org Foundation"
[    17.001] compiled for 1.15.0, module version = 0.8.1
[    17.001] Module class: X.Org Video Driver
[    17.001] ABI class: X.Org Video Driver, version 15.0
[    17.001] (II) LoadModule: "fbdev"
[    17.001] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.001] (II) Module fbdev: vendor="X.Org Foundation"
[    17.002] compiled for 1.15.0, module version = 0.4.4
[    17.002] Module class: X.Org Video Driver
[    17.002] ABI class: X.Org Video Driver, version 15.0
[    17.002] (II) LoadModule: "vesa"
[    17.002] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.004] (II) Module vesa: vendor="X.Org Foundation"
[    17.004] compiled for 1.15.0, module version = 2.3.3
[    17.004] Module class: X.Org Video Driver
[    17.004] ABI class: X.Org Video Driver, version 15.0
[    17.004] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    17.005] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[    17.005] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[    17.005] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[    17.005] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    17.005] (II) FBDEV: driver for framebuffer: fbdev
[    17.005] (II) VESA: driver for VESA chipsets: vesa
[    17.005] (++) using VT number 7

[    17.019] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.911-0intel1 (Andrew Lee (李健秋) <andrew.lee@collabora.co.uk>)
[    17.021] (WW) Falling back to old probe method for modesetting
[    17.021] (WW) Falling back to old probe method for fbdev
[    17.021] (II) Loading sub module "fbdevhw"
[    17.021] (II) LoadModule: "fbdevhw"
[    17.021] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.021] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.021] compiled for 1.15.1, module version = 0.0.2
[    17.021] ABI class: X.Org Video Driver, version 15.0
[    17.021] (WW) Falling back to old probe method for vesa
[    17.022] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    17.022] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    17.022] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    17.022] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    17.022] (==) intel(0): RGB weight 888
[    17.022] (==) intel(0): Default visual is TrueColor
[    17.022] (**) intel(0): Framebuffer tiled
[    17.022] (**) intel(0): Pixmaps tiled
[    17.022] (**) intel(0): "Tear free" disabled
[    17.022] (**) intel(0): Forcing per-crtc-pixmaps? no
[    17.022] (II) intel(0): Output LVDS1 has no monitor section
[    17.022] (--) intel(0): Found backlight control interface acpi_video1 (type 'firmware') for output LVDS1
[    17.022] (II) intel(0): Output VGA1 has no monitor section
[    17.022] (II) intel(0): Output HDMI1 has no monitor section
[    17.022] (II) intel(0): Output DP1 has no monitor section
[    17.022] (II) intel(0): Output VIRTUAL1 has no monitor section
[    17.022] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[    17.022] (--) intel(0): Output VGA1 using initial mode 1920x1080 on pipe 1
[    17.022] (==) intel(0): DPI set to (96, 96)
[    17.022] (II) Loading sub module "dri2"
[    17.022] (II) LoadModule: "dri2"
[    17.022] (II) Module "dri2" already built-in
[    17.023] (II) UnloadModule: "modesetting"
[    17.023] (II) Unloading modesetting
[    17.023] (II) UnloadModule: "fbdev"
[    17.023] (II) Unloading fbdev
[    17.023] (II) UnloadSubModule: "fbdevhw"
[    17.023] (II) Unloading fbdevhw
[    17.023] (II) UnloadModule: "vesa"
[    17.023] (II) Unloading vesa
[    17.023] (==) Depth 24 pixmap format is 32 bpp
[    17.024] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[    17.024] (==) intel(0): Backing store enabled
[    17.024] (==) intel(0): Silken mouse enabled
[    17.024] (II) intel(0): HW Cursor enabled
[    17.024] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.025] (==) intel(0): DPMS enabled
[    17.025] (II) intel(0): [DRI2] Setup complete
[    17.025] (II) intel(0): [DRI2]   DRI driver: i965
[    17.025] (II) intel(0): [DRI2]   VDPAU driver: i965
[    17.025] (II) intel(0): direct rendering: DRI2 Enabled
[    17.025] (==) intel(0): hotplug detection: "enabled"
[    17.025] (--) RandR disabled
[    17.028] (II) SELinux: Disabled on system
[    17.152] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    17.152] (II) AIGLX: enabled GLX_ARB_create_context
[    17.152] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    17.152] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    17.152] (II) AIGLX: enabled GLX_INTEL_swap_event
[    17.152] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    17.152] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    17.152] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    17.152] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    17.152] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    17.152] (II) AIGLX: Loaded and initialized i965
[    17.152] (II) GLX: Initialized DRI2 GL provider for screen 0
[    17.179] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    17.196] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
[    17.212] (II) intel(0): Setting screen physical size to 508 x 285
[    17.222] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    17.224] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    17.224] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.224] (II) LoadModule: "evdev"
[    17.224] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.235] (II) Module evdev: vendor="X.Org Foundation"
[    17.235] compiled for 1.15.0, module version = 2.8.2
[    17.235] Module class: X.Org XInput Driver
[    17.235] ABI class: X.Org XInput driver, version 20.0
[    17.235] (II) Using input driver 'evdev' for 'Power Button'
[    17.235] (**) Power Button: always reports core events
[    17.235] (**) evdev: Power Button: Device: "/dev/input/event2"
[    17.235] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.235] (--) evdev: Power Button: Found keys
[    17.235] (II) evdev: Power Button: Configuring as keyboard
[    17.235] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    17.235] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.235] (**) Option "xkb_rules" "evdev"
[    17.235] (**) Option "xkb_model" "pc105"
[    17.235] (**) Option "xkb_layout" "cz"
[    17.237] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[    17.238] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    17.238] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    17.238] (II) Using input driver 'evdev' for 'Video Bus'
[    17.238] (**) Video Bus: always reports core events
[    17.238] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    17.238] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    17.238] (--) evdev: Video Bus: Found keys
[    17.238] (II) evdev: Video Bus: Configuring as keyboard
[    17.238] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19/event12"
[    17.238] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    17.238] (**) Option "xkb_rules" "evdev"
[    17.238] (**) Option "xkb_model" "pc105"
[    17.238] (**) Option "xkb_layout" "cz"
[    17.238] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    17.238] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    17.238] (II) Using input driver 'evdev' for 'Video Bus'
[    17.238] (**) Video Bus: always reports core events
[    17.238] (**) evdev: Video Bus: Device: "/dev/input/event11"
[    17.238] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    17.238] (--) evdev: Video Bus: Found keys
[    17.238] (II) evdev: Video Bus: Configuring as keyboard
[    17.238] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input18/event11"
[    17.238] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    17.238] (**) Option "xkb_rules" "evdev"
[    17.238] (**) Option "xkb_model" "pc105"
[    17.238] (**) Option "xkb_layout" "cz"
[    17.238] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    17.238] (II) No input driver specified, ignoring this device.
[    17.238] (II) This device may have been added with another device file.
[    17.238] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    17.238] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    17.238] (II) Using input driver 'evdev' for 'Sleep Button'
[    17.238] (**) Sleep Button: always reports core events
[    17.238] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    17.238] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    17.238] (--) evdev: Sleep Button: Found keys
[    17.238] (II) evdev: Sleep Button: Configuring as keyboard
[    17.238] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    17.239] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    17.239] (**) Option "xkb_rules" "evdev"
[    17.239] (**) Option "xkb_model" "pc105"
[    17.239] (**) Option "xkb_layout" "cz"
[    17.239] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    17.239] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    17.239] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event5)
[    17.239] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[    17.239] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    17.239] (**) A4TECH USB Device: always reports core events
[    17.239] (**) evdev: A4TECH USB Device: Device: "/dev/input/event5"
[    17.239] (II) evdev: A4TECH USB Device: Using mtdev for this device
[    17.239] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[    17.239] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[    17.239] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    17.239] (--) evdev: A4TECH USB Device: Found relative axes
[    17.239] (--) evdev: A4TECH USB Device: Found absolute axes
[    17.239] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[    17.239] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[    17.239] (--) evdev: A4TECH USB Device: Found keys
[    17.239] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[    17.239] (II) evdev: A4TECH USB Device: Configuring as mouse
[    17.239] (II) evdev: A4TECH USB Device: Configuring as keyboard
[    17.239] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    17.239] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    17.239] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.239] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input12/event5"
[    17.239] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 10)
[    17.239] (**) Option "xkb_rules" "evdev"
[    17.239] (**) Option "xkb_model" "pc105"
[    17.239] (**) Option "xkb_layout" "cz"
[    17.239] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    17.239] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[    17.240] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    17.240] (**) A4TECH USB Device: (accel) acceleration profile 0
[    17.240] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    17.240] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    17.240] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[    17.240] (II) No input driver specified, ignoring this device.
[    17.240] (II) This device may have been added with another device file.
[    17.240] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event6)
[    17.240] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[    17.240] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    17.240] (**) A4TECH USB Device: always reports core events
[    17.240] (**) evdev: A4TECH USB Device: Device: "/dev/input/event6"
[    17.240] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[    17.240] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[    17.240] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    17.240] (--) evdev: A4TECH USB Device: Found relative axes
[    17.240] (--) evdev: A4TECH USB Device: Found x and y relative axes
[    17.240] (II) evdev: A4TECH USB Device: Configuring as mouse
[    17.240] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    17.240] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    17.240] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input13/event6"
[    17.240] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 11)
[    17.240] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    17.240] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    17.240] (**) A4TECH USB Device: (accel) acceleration profile 0
[    17.240] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    17.240] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    17.240] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse1)
[    17.240] (II) No input driver specified, ignoring this device.
[    17.240] (II) This device may have been added with another device file.
[    17.241] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event7)
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[    17.241] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[    17.241] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event7"
[    17.241] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Vendor 0x45e Product 0xdb
[    17.241] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[    17.241] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[    17.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input14/event7"
[    17.241] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 12)
[    17.241] (**) Option "xkb_rules" "evdev"
[    17.241] (**) Option "xkb_model" "pc105"
[    17.241] (**) Option "xkb_layout" "cz"
[    17.241] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event8)
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[    17.241] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[    17.241] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event8"
[    17.241] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Vendor 0x45e Product 0xdb
[    17.241] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found 1 mouse buttons
[    17.241] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found scroll wheel(s)
[    17.241] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found relative axes
[    17.241] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Forcing relative x/y axes to exist.
[    17.241] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found absolute axes
[    17.241] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Forcing absolute x/y axes to exist.
[    17.241] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[    17.241] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as mouse
[    17.241] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[    17.241] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Adding scrollwheel support
[    17.241] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: YAxisMapping: buttons 4 and 5
[    17.241] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.1/input/input15/event8"
[    17.241] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 13)
[    17.241] (**) Option "xkb_rules" "evdev"
[    17.241] (**) Option "xkb_model" "pc105"
[    17.241] (**) Option "xkb_layout" "cz"
[    17.241] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: initialized for relative axes.
[    17.241] (WW) evdev: Microsoft Natural® Ergonomic Keyboard 4000: ignoring absolute axes.
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) keeping acceleration scheme 1
[    17.242] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration profile 0
[    17.242] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[    17.242] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[    17.242] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event10)
[    17.242] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[    17.242] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam'
[    17.242] (**) ASUS USB2.0 Webcam: always reports core events
[    17.242] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event10"
[    17.242] (--) evdev: ASUS USB2.0 Webcam: Vendor 0x1bcf Product 0x2883
[    17.242] (--) evdev: ASUS USB2.0 Webcam: Found keys
[    17.242] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard
[    17.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input17/event10"
[    17.242] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 14)
[    17.242] (**) Option "xkb_rules" "evdev"
[    17.242] (**) Option "xkb_model" "pc105"
[    17.242] (**) Option "xkb_layout" "cz"
[    17.242] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[    17.242] (II) No input driver specified, ignoring this device.
[    17.242] (II) This device may have been added with another device file.
[    17.242] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[    17.242] (II) No input driver specified, ignoring this device.
[    17.242] (II) This device may have been added with another device file.
[    17.242] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    17.242] (II) No input driver specified, ignoring this device.
[    17.242] (II) This device may have been added with another device file.
[    17.243] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[    17.243] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    17.243] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[    17.243] (**) Asus WMI hotkeys: always reports core events
[    17.243] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"
[    17.243] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[    17.243] (--) evdev: Asus WMI hotkeys: Found keys
[    17.243] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[    17.243] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input16/event9"
[    17.243] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 15)
[    17.243] (**) Option "xkb_rules" "evdev"
[    17.243] (**) Option "xkb_model" "pc105"
[    17.243] (**) Option "xkb_layout" "cz"
[    17.243] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    17.243] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    17.243] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    17.243] (**) AT Translated Set 2 keyboard: always reports core events
[    17.243] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    17.243] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    17.243] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    17.243] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    17.243] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    17.243] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[    17.243] (**) Option "xkb_rules" "evdev"
[    17.243] (**) Option "xkb_model" "pc105"
[    17.243] (**) Option "xkb_layout" "cz"
[    17.243] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event4)
[    17.243] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    17.243] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    17.243] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    17.243] (II) LoadModule: "synaptics"
[    17.243] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    17.243] (II) Module synaptics: vendor="X.Org Foundation"
[    17.243] compiled for 1.15.0, module version = 1.7.4
[    17.243] Module class: X.Org XInput Driver
[    17.243] ABI class: X.Org XInput driver, version 20.0
[    17.244] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    17.244] (**) ETPS/2 Elantech Touchpad: always reports core events
[    17.244] (**) Option "Device" "/dev/input/event4"
[    17.264] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    17.264] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3249 (res 33)
[    17.264] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2223 (res 33)
[    17.264] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    17.264] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    17.264] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    17.264] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    17.264] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    17.264] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    17.264] (**) ETPS/2 Elantech Touchpad: always reports core events
[    17.276] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event4"
[    17.276] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 17)
[    17.276] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    17.276] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    17.276] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[    17.276] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    17.276] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    17.276] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    17.276] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    17.276] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    17.276] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    17.276] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    21.510] (II) intel(0): EDID vendor "CMO", prod id 5543
[    21.510] (II) intel(0): Printing DDC gathered Modelines:
[    21.510] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1382 1416 1466  768 770 776 788 -hsync -vsync (47.3 kHz eP)
[    22.576] (II) intel(0): resizing framebuffer to 3286x1080
[    22.576] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    22.600] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
[    22.617] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 1, position (1366, 0), rotation normal, reflection none
[    31.600] (II) intel(0): resizing framebuffer to 1920x1080
[    31.600] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    31.620] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[    33.158] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    33.863] (II) XKB: reuse xkmfile /var/lib/xkb/server-A17A8B7E6A035B08AEF1458EC9F5EEBBE3604670.xkm
[    33.904] (II) XKB: reuse xkmfile /var/lib/xkb/server-A17A8B7E6A035B08AEF1458EC9F5EEBBE3604670.xkm
[    45.793] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BD819BD9B0C2569C0062EE452EB010A1F1B5E5F.xkm

[Myrmica]

1. Pošli sem výpis příkazu:

Kód: [Vybrat]

lspci | grep VGAVypadá to že máš dvě přepínatelné grafiky
Poznáš to podle výpisu výše uvedeného výpisu.
Pokud ve výpisu nebudou dva řádky podle níže uvedeného nic nedělej, jen sem pošli výstup toho příkazu.
Pokud tam budou dva řádky, v jednom bude jako výrobce uveden Intel Corporation a ve druhém NVIDIA Corporation a u každého budou typy čipů a jiné podrobnosti, pak máš systém se dvěmi grafikamy.
Pomůže postup uvedený zde: http://forum.ubuntu.cz/index.php?topic=71459.msg514782#msg514782

Pro tento postup používám malinkou modifikaci a nejdříve odstraňuji ze systému staré ovladače:

Kód: [Vybrat]

sudo apt-get purge nvidia*
sudo apt-get --purge autoremove
Pak provádím vlastní instalaci ovladačů:

Kód: [Vybrat]

sudo add-apt-repository ppa:nilarimogard/webupd8 -y
sudo apt-get update
sudo apt-get install nvidia-prime prime-indicator -y

[Triscal]

Ahoj,
dvě přepínatelné grafické karty mám zcela určitě, potvrzuje to i výpis lspci

Kód: [Vybrat]

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 635M] (rev a1).

Co se týče navrhovaného řešení, došel jsem k naprosto stejnému výsledku. Objeví se fialová obrazovka s logem ubuntu a tečkami pod ním, následně zmizí a zůstane černá obrazovka kde v levém horním rohu bliká kurzor, pak blikat přestane a počítač přestane na cokoliv reagovat. Pokud se za včasu přepnu do jiného tty, tak se objeví nabídka low-graphic mode - přesně takto se to chovalo i před tím.

Ještě jsem si všiml jedné věci (před tím to bylo taky, ale neuvědomil jsem si to), pokud mám odinstalované ovladače nvidia tak ubuntu při bootování hlásí 3 eror hlášky, které nestačím přečíst, proto velmi rychle zmizí, pokud jsou nainstalované nvidia ovladače těchto hlášek je 5, ale zase je nestačím přečíst, ani nevím, jak se k nim dostat.

Díky moc za radu, ale nvidia ovladače jsem musel zase odinstalovat, aby byl počítač vůbec funkční.

Napadá vás ještě něco dalšího?

[Myrmica]

Na to co se ti nainstalovalo při instalaci intel-linux-graphic-installer se můžeš podívat do synapticu:
synaptic > výběr > historie > konkrétní datum
Vypadá to že,  intel-linux-graphic-installer ti nainstaloval něco nekompatibilního s NVIDIA. Odinstaloval bych vše co se při té instalaci nainstalovalo.
A promiň, že jsem si nevšiml, že jsi již postup od RRRAdek Neužil jednou použil.

[Triscal]

V pohodě, myslím, že je to výborný nápad, tak bych řekl, že to bude těmi ovladači, ale problém je v tom, že synaptic historie je prázdná, tedy neukáže mi, které balíky byly aktualizovány, kde by se to dalo ještě zjistit?

Už dobré, našel jsem to v /var/apt/log, ale představa že vyhledávám, všechny balíky ručně mě opravdu netěší, takže to vidím tak, že reinstaluji systém (což jsem dělal nedávno, takže to nebude problém) a nebudu instalovat intel ovladače přes linu-intel-graphic-instaler, ale raději vždy počkám, až je přidají do distro, jinak se s toho zblázním.

Škoda, že s těmi ovladači je to pořád takový problém...

[Myrmica]

Ještě to možná šlo nějak takto

Kód: [Vybrat]

sudo apt-get remove --purge  intel-linux-graphic-installerzáleží pod jakým názvem jsi to instaloval a jestli jako balíček .deb. Mohlo by to být v synapticu mezi nainstalovanými balíky.

[Triscal]

Zkusím to, ještě jsem to nereinstaloval rozhodl jsem se dát tomu šanci.

Zatím se mi podařilo najít historii v centurm softwaru, a podařilo se mi odstranit všechny nově nainstalované balíčky za včerejšek, po nainstalování nvidia ovladačů jsem se dostal dokonce už i k přihlašovací obrazovce a přihlásil, naběhla plocha a conky, ale ne unity a nebylo možné pustit terminál (grafický).

Ještě zkusím downgrade všech balíčků ze včerejška, ale upřímně mě to děsí, když vidím že budu muset každému balíčku nastavovat verzi ručně. Ale evidentně tudy vede cesta

Tak při odebírání tohoto balíku mi to nic jiného neodinstaluje, takže toto řešení nebude...

[Triscal]

Takže se mi podařilo odstranit veškeré balíky, které jsem v úterý nainstaloval a zároveň převedl na nižší verzi všechny balíky, které šly, které jsem včera upgradoval.

Výsledek? Po instalaci nvidia ovladačů se můžu přihlásit, ale nenaběhne mi prostředí unity, jen obrazovka, myš a conky.

Po odinstalaci běžím opět na nouveau driverech a pod všemi nabídkami se mi zobrazuje hodně tlustý černý rám (více na obrázcích).

Teď už jsem opravdu v koncích s nápady

[příloha smazaná administrátorem]

[marun]

ja sem taky míval problémy s ovladači
nejrychlejší řešení ke komplet přeinstalace s přeformátováním všech ubuntích oddílů
pak udělat všechny aktualizace i jádra restart a pustit se do toho
(já osobně radši stále používám bumblebee)

[Triscal]

Taky bych chtěl bumblebee, ale na ubuntu 14.04 64bit se mi nepodařilo jej pořádně rozhchodit, prime podle návodu výše byl jediný, který se mi podařilo kloudně rozchodit.

Bumblebee na 12.04 bylo supr

[marun]

na můj asus N56JR nainstaluji bumblebee velmi jednoduše ten návod na wiki je zastaralý a složitý
udělej čistou instalaci, upgraduj vše i jádro + nainstaluj linux-generic (ne linux-imege-generic - bumblebee vyžaduje headers pro funkci) restart

Kód: [Vybrat]

sudo add-apt-repository ppa:bumblebee/stable -y
sudo add-apt-repository ppa:ubuntu-x-swat/x-updates -y
sudo apt-get update
sudo apt-get install bumblebee bumblebee-nvidia primus nvidia-331 -y
pro jistotu si ověř že ti to při instalaci správně detekovali grafiku (bude to ve výpisu) ale na 99% to bude
restart a vše funguje

[Triscal]

Večer se do toho pustím, díky za radu uvidím, co se s tím dá dělat

[Myrmica]

No ještě bych zkusil restart a případně reinstalaci unity:
Restart Unity (není vidět panely a dekorace oken), instalaci stačí dát jen při prvním použití

Kód: [Vybrat]

sudo apt-get install dconf-tools
dconf reset -f /org/compiz/
setsid unity
Po provedení příkazu:

Kód: [Vybrat]

unity --replace
výpis obsahoval hlášku:
unity-panel-service: no process found

Pak je vhodná přeinstalace samotného unity:

Kód: [Vybrat]

sudo apt-get install --reinstall unity
To mi vždy pomáhalo. Pak můžeš zkusit to bumblebee.

Při instalaci ubuntu můžeš nainstalovat i linux-image-generic, jen pak je potřeba doinstalovat linux*headers

Kód: [Vybrat]

sudo apt-get install linux-headers-genericnebo

Kód: [Vybrat]

sudo apt-get install linux-headers-$(uname -r)

[marun]

toto mě nikdy nefungovalo a zbytečně jsem ztrácel čas radši sem to komplet přeinstaloval

ad jádro

linux-generic závisí na linux-image-generis a linux-headers-generic (a kazdý z nich na nejaktuálnější verzi) a proto se nikdy nestane že pojede na jádře bez headers

[Triscal]

Tak jsem to vzdal a nasadil čistou instalaci tak to snad tentokrát bude fungovat, nakonec jsem se znovu rozhodl pro prime - ten posledně fungoval dobře, kdežto s bumblebee jsem měl problém a už jsem to nechtěl řešit.

Intel-linux-graphic-installer jsem už radši ani neinstaloval a ani nebudu, co bude systém potřebovat si vezme s oficiálních repo, tak by to mohlo šlapat

Díky za rady

Tímto to považuji za vyřešené