Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Po aktualizácií nenabehne 12.04LTS-ZREJME NEVYRIEŠITELNÉ  (Přečteno 24651 krát)

Savalas

  • Člen
  • **
  • Příspěvků: 409
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #50 kdy: 07 Října 2014, 07:32:57 »
To je hodne zajimave, podle toho jak to chapu to ukazuje procesy i v poradi v jakem se spoustely tedy je videt kam se az dostanes, takze tesne pred spusteni grafickeho prostredi, takze treba skuz prikazy na spusteni grafickeho prostredi, ale nemusi jet secko.
Kód: [Vybrat]
sudo service gdm start
Kód: [Vybrat]
sudo lightdm start
Kód: [Vybrat]
startx
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #51 kdy: 07 Října 2014, 16:22:41 »
Tak ani toto neprinieslo svetlo.... Tu sú odpovede:
Kód: [Vybrat]
sudo service gdm startunrecodnized service
Kód: [Vybrat]
sudo lightdm start could not write bytes: Broken pipe
Kód: [Vybrat]
startx
x: cannot start /etc/X11/X (no such file or directory), aborting
xinit: giving up
xinit: unable to connect to xserver: no such file or directory
xinit: server error

Ale teraz,aj keď sa to zdá divné mám nápad ja.... Nemôže byť poškodená oblasť hdd a preto sa ten xserver nespustí?
« Poslední změna: 07 Října 2014, 16:27:08 od xaser5 »

Savalas

  • Člen
  • **
  • Příspěvků: 409
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #52 kdy: 07 Října 2014, 16:55:19 »
Chybove klasky sou lepsi nez "systém nenabehne", z tohodle vypada ze uplne chybi soubory pro graficke rozhrani, toz du googlit.
Ke kontrole disku http://wiki.ubuntu.cz/kontrola_souborov%C3%A9ho_syst%C3%A9mu
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

Savalas

  • Člen
  • **
  • Příspěvků: 409
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #53 kdy: 07 Října 2014, 18:27:36 »
Uplne stejny problem sem nenasel, resenim ale podobnych problemu, bylo skoro vzdicky instalace kolem grafickeho prostredi. Prikladam co sem nasel, jestli jsi spis opatry, pockej co nato reknou dalsi, neco to muze rozchodit, neco jineho zase treba zborit.

na http://ubuntuforums.org/showthread.php?t=2169458 sou doporuceny prikazy
Kód: [Vybrat]
sudo apt-get remove --purge lightdm
sudo apt-get install lightdm xorg
sudo nvidia-xconfig
sudo /etc/init.d/lightdm restart

na http://askubuntu.com/questions/355515/could-not-write-bytes-broken-pipe-12-04
Kód: [Vybrat]
sudo apt-get install xserver-xorg-all xserver-xorg-video-all
http://linuxforums.org.uk/index.php?topic=11461.15;PHPSESSID=1h53noibapkiabhqo6377avhk6
Kód: [Vybrat]
sudo apt-get install --reinstall xserver-xorg-video-vesa xserver-xorg-video-fbdev xserver-xorg-video-intel
http://www.linuxmintusers.de/index.php?topic=16242.0
Kód: [Vybrat]
sudo apt-get install --reinstall xserver-xorg xserver-common
http://ubuntuforums.org/showthread.php?t=817975
Kód: [Vybrat]
sudo apt-get -y --force-yes install ubuntu-desktop
http://ubuntuforums.org/showthread.php?t=1072820
Kód: [Vybrat]
sudo dpkg-reconfigure -phigh xserver-xorg
http://askubuntu.com/questions/232926/etc-x11-x-not-executable-error-when-startx, tu to je trosku slozitejsi
Kód: [Vybrat]
sudo dpkg-reconfigure -phigh xserver-xorg
rm /etc/X11/X
apt-get update && apt-get upgrade
apt-get install -reinstall xserver-xorg
apt-get install -reinstall gdm gnome-desktop-environment xorg
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

Cuore

  • Závislák
  • ****
  • Příspěvků: 2534
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #54 kdy: 07 Října 2014, 18:47:08 »
Dost se toho už testovalo, nebo obdobné derivace. Nic s tím nepokazíš, já bych to otestoval.

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #55 kdy: 07 Října 2014, 19:00:25 »
Kód: [Vybrat]
sudo nvidia-xconfigcommand not found
Kód: [Vybrat]
sudo /etc/init.d/lightdm restartcould not write bytes: Broken pipe
Kód: [Vybrat]
sudo apt-get install --reinstall xserver-xorg-video-vesa xserver-xorg-video-fbdev xserver-xorg-video-intelbalík ...... vesa, .......fbdev, .......intel nemá splnené závislosti, problém sa nedá opraviť.....
Kód: [Vybrat]
sudo apt-get install --reinstall xserver-xorg xserver-commonsystém nabieha až nabehne do : The system is running in low-graphics mode, potom mám na výber What would you like to do?, lenže v okne sa nedá posúvať ničím, ani myš nefunguje.....
Kód: [Vybrat]
sudo apt-get -y --force-yes install ubuntu-desktopvšetko sa urobí,ale pokrok žiadny
« Poslední změna: 07 Října 2014, 19:27:29 od xaser5 »

Savalas

  • Člen
  • **
  • Příspěvků: 409
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #56 kdy: 07 Října 2014, 19:29:36 »
Zkusime nahodit ty ovladace grafiky

http://askubuntu.com/questions/126905/nvidia-driver-cannot-be-installed-with-jockey-for-old-hardware
Kód: [Vybrat]
sudo apt-get remove nvidia-current nvidia-current-updates nvidia-settings nvidia-settings-updates
sudo apt-get install nvidia-173
sudo nvidia-xconfig
pripadne
http://askubuntu.com/questions/153915/how-to-install-drivers-for-nvidia-geforce-fx-5200-on-precise
http://ubuntuforums.org/showthread.php?t=1986601
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #57 kdy: 07 Října 2014, 19:49:15 »
Už úplne zle :D
Kód: [Vybrat]
sudo apt-get remove nvidia-current nvidia-current-updates nvidia-settings nvidia-settings-updatesE: do /var/cache/apt sa nedá zapisovať
« Poslední změna: 07 Října 2014, 19:51:32 od xaser5 »

Savalas

  • Člen
  • **
  • Příspěvků: 409
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #58 kdy: 07 Října 2014, 20:32:14 »
By bylo jednodusi udelat reinstal ikdyz i to neni jen tak http://blog.ubuntu.cz/clanek/preinstalovanim-systemu-muzete-prijit-o-vsechna-data .

Na E: Unable to write to /var/cache/apt/ by mohly platit dve veci
Kód: [Vybrat]
sudo rm -rf /var/lib/dpkg/locknebo
Kód: [Vybrat]
sudo mount / -o remount,rwa pak zkusit znova instalaci grafiky

Zkusil bych se podivat zase na z /var/log/Xorg.0.log jesli je uz pritomen a
Kód: [Vybrat]
ps -ejH > /cesta/kam_to_chceš_poslat/procesy.txt kam az sme se pohli.

Jeste na to
Citace
nemá splnené závislosti, problém sa nedá opraviť....
Kód: [Vybrat]
sudo apt-get install -fAle to uz fak tezce plavu za svyma znalostma, secko to overovat da dost prace..
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

sabraq

  • Závislák
  • ****
  • Příspěvků: 3395
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #59 kdy: 07 Října 2014, 20:39:16 »
Uf, takže startx, říkáte?

Kód: [Vybrat]
$ cat /etc/X11/default-display-manager
/usr/sbin/lightdm

$sudo service lightdm restart

Už úplne zle :D
Kód: [Vybrat]
sudo apt-get remove nvidia-current nvidia-current-updates nvidia-settings nvidia-settings-updatesE: do /var/cache/apt sa nedá zapisovať

Máš rozmlácený závislosti, těžko říct proč. Jelikož sem nedáváš přesnej výstup z terminálu, je těžké si toho všimnout. Chápu, že dokumentovat výstupy bez grafiky je obtížné a zdlohuhavé. Pokud máš na to ještě trpělivost, proveď
Kód: [Vybrat]
sudo apt-get update && sudo apt-get upgradea pochlub se co to vyhodí.

Další se asi bude motat okolo složky /etc/apt/


Jinak, pokud máš  samostatný /home, tak smaž skrytý složky a soubory a reinstaluj. Pokud ho nemáš samostatný, tak si někam přetáhni co potřebuješ a reinstaluj. Nebo se vrať k windows, tohle nikam nevede.
************************************

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #60 kdy: 07 Října 2014, 20:54:34 »
Vystupy z terminalu sa snazím davat. Napisem kod a pod neho vystup. No este sa posnažím to čo ste sem dali, a potom otestujem hdd a uvidím. Dám vedet. Zatial dik...

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #61 kdy: 08 Října 2014, 20:33:42 »
Kód: [Vybrat]
sudo rm -rf /var/lib/dpkg/lockrm: nie je možné odstrániť /var/lib/dpkg/lock: súborový systém dovoľuje len čítanie
Kód: [Vybrat]
sudo mount / -o remount,rw
Kód: [Vybrat]
sudo apt-get remove nvidia-current nvidia-current-updates nvidia-settings nvidia-settings-updates
sudo apt-get install nvidia-173
sudo nvidia-xconfig
Warning:Unable to locate/open X configuration file.
New configuration file writen to etc/X11/xorg.conf
Kód: [Vybrat]
cp -v /var/log/Xorg.0.log  /cesta/grafika.log.txt
Kód: [Vybrat]
[    28.000]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    28.000] X Protocol Version 11, Revision 0
[    28.000] Build Operating System: Linux 2.6.42-37-generic i686 Ubuntu
[    28.000] Current Operating System: Linux etis-2 3.13.0-36-generic #63~precise1-Ubuntu SMP Thu Sep 4 22:30:51 UTC 2014 i686
[    28.000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=5661932b-a65d-452b-a0b1-e88f31ab8082 ro quiet splash vt.handoff=7
[    28.000] Build Date: 16 October 2013  04:45:22PM
[    28.000] xorg-server 2:1.11.4-0ubuntu10.14 (For technical support please see http://www.ubuntu.com/support)
[    28.000] Current version of pixman: 0.30.2
[    28.000] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    28.000] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.001] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct  8 20:30:16 2014
[    28.495] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.604] (==) No Layout section.  Using the first Screen section.
[    28.604] (==) No screen section available. Using defaults.
[    28.604] (**) |-->Screen "Default Screen Section" (0)
[    28.604] (**) |   |-->Monitor "<default monitor>"
[    28.667] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    28.667] (==) Automatically adding devices
[    28.667] (==) Automatically enabling devices
[    28.741] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.741] Entry deleted from font path.
[    28.741] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    28.741] Entry deleted from font path.
[    28.741] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    28.741] Entry deleted from font path.
[    28.769] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    28.770] Entry deleted from font path.
[    28.770] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    28.770] Entry deleted from font path.
[    28.770] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    28.770] Entry deleted from font path.
[    28.770] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    28.770] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    28.770] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.802] (II) Loader magic: 0xb77175a0
[    28.802] (II) Module ABI versions:
[    28.802] X.Org ANSI C Emulation: 0.4
[    28.802] X.Org Video Driver: 11.0
[    28.802] X.Org XInput driver : 16.0
[    28.802] X.Org Server Extension : 6.0
[    28.803] (--) PCI:*(0:1:0:0) 10de:0322:1043:80df rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, BIOS @ 0x????????/131072
[    28.803] (II) Open ACPI successful (/var/run/acpid.socket)
[    28.803] (II) LoadModule: "extmod"
[    29.052] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    29.137] (II) Module extmod: vendor="X.Org Foundation"
[    29.137] compiled for 1.11.3, module version = 1.0.0
[    29.137] Module class: X.Org Server Extension
[    29.137] ABI class: X.Org Server Extension, version 6.0
[    29.137] (II) Loading extension MIT-SCREEN-SAVER
[    29.137] (II) Loading extension XFree86-VidModeExtension
[    29.137] (II) Loading extension XFree86-DGA
[    29.161] (II) Loading extension DPMS
[    29.161] (II) Loading extension XVideo
[    29.161] (II) Loading extension XVideo-MotionCompensation
[    29.161] (II) Loading extension X-Resource
[    29.161] (II) LoadModule: "dbe"
[    29.162] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    29.216] (II) Module dbe: vendor="X.Org Foundation"
[    29.216] compiled for 1.11.3, module version = 1.0.0
[    29.216] Module class: X.Org Server Extension
[    29.216] ABI class: X.Org Server Extension, version 6.0
[    29.216] (II) Loading extension DOUBLE-BUFFER
[    29.216] (II) LoadModule: "glx"
[    29.216] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    29.315] (II) Module glx: vendor="X.Org Foundation"
[    29.320] compiled for 1.11.3, module version = 1.0.0
[    29.320] ABI class: X.Org Server Extension, version 6.0
[    29.320] (==) AIGLX enabled
[    29.320] (II) Loading extension GLX
[    29.320] (II) LoadModule: "record"
[    29.320] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    29.375] (II) Module record: vendor="X.Org Foundation"
[    29.375] compiled for 1.11.3, module version = 1.13.0
[    29.375] Module class: X.Org Server Extension
[    29.375] ABI class: X.Org Server Extension, version 6.0
[    29.375] (II) Loading extension RECORD
[    29.375] (II) LoadModule: "dri"
[    29.375] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    29.398] (II) Module dri: vendor="X.Org Foundation"
[    29.398] compiled for 1.11.3, module version = 1.0.0
[    29.398] ABI class: X.Org Server Extension, version 6.0
[    29.398] (II) Loading extension XFree86-DRI
[    29.398] (II) LoadModule: "dri2"
[    29.399] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    29.400] (II) Module dri2: vendor="X.Org Foundation"
[    29.400] compiled for 1.11.3, module version = 1.2.0
[    29.400] ABI class: X.Org Server Extension, version 6.0
[    29.400] (II) Loading extension DRI2
[    29.400] (==) Matched nvidia as autoconfigured driver 0
[    29.400] (==) Matched nouveau as autoconfigured driver 1
[    29.400] (==) Matched nv as autoconfigured driver 2
[    29.400] (==) Matched vesa as autoconfigured driver 3
[    29.400] (==) Matched fbdev as autoconfigured driver 4
[    29.400] (==) Assigned the driver to the xf86ConfigLayout
[    29.400] (II) LoadModule: "nvidia"
[    29.423] (WW) Warning, couldn't open module nvidia
[    29.423] (II) UnloadModule: "nvidia"
[    29.423] (II) Unloading nvidia
[    29.423] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    29.423] (II) LoadModule: "nouveau"
[    29.423] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    29.460] (II) Module nouveau: vendor="X.Org Foundation"
[    29.460] compiled for 1.11.3, module version = 0.0.16
[    29.460] Module class: X.Org Video Driver
[    29.460] ABI class: X.Org Video Driver, version 11.0
[    29.461] (II) LoadModule: "nv"
[    29.462] (WW) Warning, couldn't open module nv
[    29.462] (II) UnloadModule: "nv"
[    29.462] (II) Unloading nv
[    29.462] (EE) Failed to load module "nv" (module does not exist, 0)
[    29.462] (II) LoadModule: "vesa"
[    29.463] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    29.516] (II) Module vesa: vendor="X.Org Foundation"
[    29.516] compiled for 1.11.3, module version = 2.3.0
[    29.516] Module class: X.Org Video Driver
[    29.516] ABI class: X.Org Video Driver, version 11.0
[    29.516] (II) LoadModule: "fbdev"
[    29.517] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    29.520] (II) Module fbdev: vendor="X.Org Foundation"
[    29.520] compiled for 1.11.3, module version = 0.4.2
[    29.520] ABI class: X.Org Video Driver, version 11.0
[    29.520] (==) Matched nvidia as autoconfigured driver 0
[    29.520] (==) Matched nouveau as autoconfigured driver 1
[    29.520] (==) Matched nv as autoconfigured driver 2
[    29.520] (==) Matched vesa as autoconfigured driver 3
[    29.520] (==) Matched fbdev as autoconfigured driver 4
[    29.520] (==) Assigned the driver to the xf86ConfigLayout
[    29.520] (II) LoadModule: "nvidia"
[    29.521] (WW) Warning, couldn't open module nvidia
[    29.521] (II) UnloadModule: "nvidia"
[    29.521] (II) Unloading nvidia
[    29.521] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    29.521] (II) LoadModule: "nouveau"
[    29.522] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    29.522] (II) Module nouveau: vendor="X.Org Foundation"
[    29.522] compiled for 1.11.3, module version = 0.0.16
[    29.522] Module class: X.Org Video Driver
[    29.522] ABI class: X.Org Video Driver, version 11.0
[    29.522] (II) UnloadModule: "nouveau"
[    29.522] (II) Unloading nouveau
[    29.522] (II) Failed to load module "nouveau" (already loaded, 0)
[    29.522] (II) LoadModule: "nv"
[    29.523] (WW) Warning, couldn't open module nv
[    29.523] (II) UnloadModule: "nv"
[    29.523] (II) Unloading nv
[    29.523] (EE) Failed to load module "nv" (module does not exist, 0)
[    29.523] (II) LoadModule: "vesa"
[    29.523] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    29.523] (II) Module vesa: vendor="X.Org Foundation"
[    29.523] compiled for 1.11.3, module version = 2.3.0
[    29.523] Module class: X.Org Video Driver
[    29.523] ABI class: X.Org Video Driver, version 11.0
[    29.523] (II) UnloadModule: "vesa"
[    29.523] (II) Unloading vesa
[    29.523] (II) Failed to load module "vesa" (already loaded, 0)
[    29.523] (II) LoadModule: "fbdev"
[    29.523] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    29.523] (II) Module fbdev: vendor="X.Org Foundation"
[    29.523] compiled for 1.11.3, module version = 0.4.2
[    29.523] ABI class: X.Org Video Driver, version 11.0
[    29.523] (II) UnloadModule: "fbdev"
[    29.523] (II) Unloading fbdev
[    29.523] (II) Failed to load module "fbdev" (already loaded, 0)
[    29.523] (II) NOUVEAU driver Date:   Wed Nov 30 18:56:54 2011 +0100
[    29.524] (II) NOUVEAU driver for NVIDIA chipset families :
[    29.524] RIVA TNT        (NV04)
[    29.524] RIVA TNT2       (NV05)
[    29.524] GeForce 256     (NV10)
[    29.524] GeForce 2       (NV11, NV15)
[    29.524] GeForce 4MX     (NV17, NV18)
[    29.524] GeForce 3       (NV20)
[    29.524] GeForce 4Ti     (NV25, NV28)
[    29.524] GeForce FX      (NV3x)
[    29.524] GeForce 6       (NV4x)
[    29.524] GeForce 7       (G7x)
[    29.524] GeForce 8       (G8x)
[    29.524] GeForce GTX 200 (NVA0)
[    29.524] GeForce GTX 400 (NVC0)
[    29.524] (II) VESA: driver for VESA chipsets: vesa
[    29.524] (II) FBDEV: driver for framebuffer: fbdev
[    29.524] (++) using VT number 7

[    29.545] drmOpenDevice: node name is /dev/dri/card0
[    29.545] drmOpenDevice: open result is 8, (OK)
[    29.545] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    29.545] drmOpenDevice: node name is /dev/dri/card0
[    29.545] drmOpenDevice: open result is 8, (OK)
[    29.545] drmOpenByBusid: drmOpenMinor returns 8
[    29.545] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    29.545] (II) [drm] nouveau interface version: 1.1.1
[    29.545] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    29.545] (WW) Falling back to old probe method for vesa
[    29.545] (WW) Falling back to old probe method for fbdev
[    29.545] (II) Loading sub module "fbdevhw"
[    29.546] (II) LoadModule: "fbdevhw"
[    29.546] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    29.582] (II) Module fbdevhw: vendor="X.Org Foundation"
[    29.582] compiled for 1.11.3, module version = 0.0.2
[    29.582] ABI class: X.Org Video Driver, version 11.0
[    29.582] (II) Loading sub module "dri"
[    29.582] (II) LoadModule: "dri"
[    29.582] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    29.582] (II) Module dri: vendor="X.Org Foundation"
[    29.582] compiled for 1.11.3, module version = 1.0.0
[    29.582] ABI class: X.Org Server Extension, version 6.0
[    29.582] (II) NOUVEAU(0): Loaded DRI module
[    29.582] drmOpenDevice: node name is /dev/dri/card0
[    29.583] drmOpenDevice: open result is 9, (OK)
[    29.583] drmOpenDevice: node name is /dev/dri/card0
[    29.583] drmOpenDevice: open result is 9, (OK)
[    29.583] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    29.583] drmOpenDevice: node name is /dev/dri/card0
[    29.583] drmOpenDevice: open result is 9, (OK)
[    29.583] drmOpenByBusid: drmOpenMinor returns 9
[    29.583] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    29.583] (II) [drm] DRM interface version 1.4
[    29.583] (II) [drm] DRM open master succeeded.
[    29.583] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[    29.583] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    29.583] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    29.583] (==) NOUVEAU(0): RGB weight 888
[    29.583] (==) NOUVEAU(0): Default visual is TrueColor
[    29.583] (==) NOUVEAU(0): Using HW cursor
[    29.583] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    29.583] (==) NOUVEAU(0): Page flipping enabled
[    29.613] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    29.668] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    29.698] (II) NOUVEAU(0): EDID for output VGA-1
[    29.698] (II) NOUVEAU(0): Manufacturer: BNQ  Model: 7688  Serial#: 1801
[    29.698] (II) NOUVEAU(0): Year: 2005  Week: 34
[    29.698] (II) NOUVEAU(0): EDID Version: 1.3
[    29.698] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    29.698] (II) NOUVEAU(0): Sync:  Separate  Composite
[    29.698] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[    29.698] (II) NOUVEAU(0): Gamma: 2.20
[    29.698] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    29.698] (II) NOUVEAU(0): First detailed timing is preferred mode
[    29.698] (II) NOUVEAU(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
[    29.698] (II) NOUVEAU(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
[    29.698] (II) NOUVEAU(0): Supported established timings:
[    29.698] (II) NOUVEAU(0): 720x400@70Hz
[    29.698] (II) NOUVEAU(0): 640x480@60Hz
[    29.698] (II) NOUVEAU(0): 640x480@67Hz
[    29.698] (II) NOUVEAU(0): 640x480@72Hz
[    29.698] (II) NOUVEAU(0): 640x480@75Hz
[    29.698] (II) NOUVEAU(0): 800x600@60Hz
[    29.698] (II) NOUVEAU(0): 800x600@72Hz
[    29.698] (II) NOUVEAU(0): 800x600@75Hz
[    29.698] (II) NOUVEAU(0): 832x624@75Hz
[    29.698] (II) NOUVEAU(0): 1024x768@60Hz
[    29.698] (II) NOUVEAU(0): 1024x768@70Hz
[    29.698] (II) NOUVEAU(0): 1024x768@75Hz
[    29.698] (II) NOUVEAU(0): 1280x1024@75Hz
[    29.698] (II) NOUVEAU(0): 1152x864@75Hz
[    29.698] (II) NOUVEAU(0): Manufacturer's mask: 0
[    29.698] (II) NOUVEAU(0): Supported standard timings:
[    29.698] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    29.698] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
[    29.698] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    29.698] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
[    29.698] (II) NOUVEAU(0): Supported detailed timing:
[    29.698] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    29.698] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    29.699] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    29.699] (II) NOUVEAU(0): Supported detailed timing:
[    29.699] (II) NOUVEAU(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
[    29.699] (II) NOUVEAU(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
[    29.699] (II) NOUVEAU(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
[    29.699] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 145 MHz
[    29.699] (II) NOUVEAU(0): Monitor name: BenQ FP71G
[    29.699] (II) NOUVEAU(0): EDID (in hex):
[    29.699] (II) NOUVEAU(0): 00ffffffffffff0009d1887609070000
[    29.699] (II) NOUVEAU(0): 220f01036c221b78eac4f6a3574a9c23
[    29.699] (II) NOUVEAU(0): 114f54bdef80714f81908180818c0101
[    29.699] (II) NOUVEAU(0): 010101010101302a009851002a403070
[    29.699] (II) NOUVEAU(0): 1300782d1100001ed50980a0205e6310
[    29.699] (II) NOUVEAU(0): 10605208782d1100001a000000fd0038
[    29.699] (II) NOUVEAU(0): 4c1f530e000a202020202020000000fc
[    29.699] (II) NOUVEAU(0): 0042656e512046503731470a202000c1
[    29.699] (II) NOUVEAU(0): EDID vendor "BNQ", prod id 30344
[    29.699] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    29.699] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    29.699] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    29.699] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[    29.699] (II) NOUVEAU(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
[    29.699] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    29.699] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "1280x1024"x76.0  141.81  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "1280x1024"x72.0  132.84  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    29.700] (II) NOUVEAU(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
[    29.756] (II) NOUVEAU(0): EDID for output TV-1
[    29.756] (II) NOUVEAU(0): Output VGA-1 connected
[    29.756] (II) NOUVEAU(0): Output TV-1 disconnected
[    29.756] (II) NOUVEAU(0): Using exact sizes for initial modes
[    29.756] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[    29.756] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    29.756] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[    29.756] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    29.756] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    29.756] (**) NOUVEAU(0):  Mode "1280x1024": 141.8 MHz (scaled from 0.0 MHz), 81.3 kHz, 76.0 Hz
[    29.756] (II) NOUVEAU(0): Modeline "1280x1024"x76.0  141.81  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[    29.756] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    29.756] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    29.757] (**) NOUVEAU(0):  Mode "1280x1024": 132.8 MHz (scaled from 0.0 MHz), 76.9 kHz, 72.0 Hz
[    29.757] (II) NOUVEAU(0): Modeline "1280x1024"x72.0  132.84  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    29.757] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    29.757] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    29.757] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    29.757] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    29.757] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    29.757] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    29.757] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    29.757] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    29.757] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    29.757] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    29.757] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    29.758] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    29.758] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    29.758] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    29.758] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    29.758] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    29.758] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    29.758] (**) NOUVEAU(0):  Driver mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    29.758] (II) NOUVEAU(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
[    29.758] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
[    29.758] (**) NOUVEAU(0): DPI set to (95, 96)
[    29.758] (II) Loading sub module "fb"
[    29.758] (II) LoadModule: "fb"
[    29.759] (II) Loading /usr/lib/xorg/modules/libfb.so
[    29.784] (II) Module fb: vendor="X.Org Foundation"
[    29.784] compiled for 1.11.3, module version = 1.0.0
[    29.784] ABI class: X.Org ANSI C Emulation, version 0.4
[    29.784] (II) Loading sub module "exa"
[    29.784] (II) LoadModule: "exa"
[    29.784] (II) Loading /usr/lib/xorg/modules/libexa.so
[    29.794] (II) Module exa: vendor="X.Org Foundation"
[    29.794] compiled for 1.11.3, module version = 2.5.0
[    29.794] ABI class: X.Org Video Driver, version 11.0
[    29.794] (II) Loading sub module "shadowfb"
[    29.794] (II) LoadModule: "shadowfb"
[    29.794] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    29.795] (II) Module shadowfb: vendor="X.Org Foundation"
[    29.795] compiled for 1.11.3, module version = 1.0.0
[    29.795] ABI class: X.Org ANSI C Emulation, version 0.4
[    29.795] (II) UnloadModule: "vesa"
[    29.795] (II) Unloading vesa
[    29.795] (II) UnloadModule: "fbdev"
[    29.795] (II) Unloading fbdev
[    29.795] (II) UnloadModule: "fbdevhw"
[    29.795] (II) Unloading fbdevhw
[    29.795] (--) Depth 24 pixmap format is 32 bpp
[    29.796] (II) NOUVEAU(0): Opened GPU channel 0
[    29.797] (II) NOUVEAU(0): [DRI2] Setup complete
[    29.797] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    29.797] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    29.797] (II) NOUVEAU(0): GART: 63MiB available
[    29.812] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[    29.829] (II) EXA(0): Driver allocated offscreen pixmaps
[    29.829] (II) EXA(0): Driver registered support for the following operations:
[    29.829] (II)         Solid
[    29.829] (II)         Copy
[    29.829] (II)         Composite (RENDER acceleration)
[    29.829] (II)         UploadToScreen
[    29.829] (II)         DownloadFromScreen
[    29.829] (==) NOUVEAU(0): Backing store disabled
[    29.829] (==) NOUVEAU(0): Silken mouse enabled
[    29.829] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[    29.829] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    29.829] (==) NOUVEAU(0): DPMS enabled
[    29.829] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    29.830] (--) RandR disabled
[    29.830] (II) Initializing built-in extension Generic Event Extension
[    29.830] (II) Initializing built-in extension SHAPE
[    29.830] (II) Initializing built-in extension MIT-SHM
[    29.830] (II) Initializing built-in extension XInputExtension
[    29.830] (II) Initializing built-in extension XTEST
[    29.830] (II) Initializing built-in extension BIG-REQUESTS
[    29.830] (II) Initializing built-in extension SYNC
[    29.830] (II) Initializing built-in extension XKEYBOARD
[    29.830] (II) Initializing built-in extension XC-MISC
[    29.830] (II) Initializing built-in extension SECURITY
[    29.830] (II) Initializing built-in extension XINERAMA
[    29.830] (II) Initializing built-in extension XFIXES
[    29.830] (II) Initializing built-in extension RENDER
[    29.830] (II) Initializing built-in extension RANDR
[    29.830] (II) Initializing built-in extension COMPOSITE
[    29.830] (II) Initializing built-in extension DAMAGE
[    30.580] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    30.580] (II) AIGLX: enabled GLX_INTEL_swap_event
[    30.580] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    30.580] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    30.580] (II) AIGLX: Loaded and initialized nouveau
[    30.580] (II) GLX: Initialized DRI2 GL provider for screen 0
[    30.587] (II) NOUVEAU(0): NVEnterVT is called.
[    30.588] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[    30.588] resize called 1280 1024
[    30.719] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    30.730] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    30.730] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.730] (II) LoadModule: "evdev"
[    30.731] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.759] (II) Module evdev: vendor="X.Org Foundation"
[    30.759] compiled for 1.11.3, module version = 2.7.0
[    30.759] Module class: X.Org XInput Driver
[    30.759] ABI class: X.Org XInput driver, version 16.0
[    30.760] (II) Using input driver 'evdev' for 'Power Button'
[    30.760] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.760] (**) Power Button: always reports core events
[    30.760] (**) evdev: Power Button: Device: "/dev/input/event1"
[    30.760] (--) evdev: Power Button: Vendor 0 Product 0x1
[    30.760] (--) evdev: Power Button: Found keys
[    30.760] (II) evdev: Power Button: Configuring as keyboard
[    30.760] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    30.760] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    30.760] (**) Option "xkb_rules" "evdev"
[    30.760] (**) Option "xkb_model" "pc105"
[    30.760] (**) Option "xkb_layout" "sk"
[    30.764] (II) XKB: reuse xkmfile /var/lib/xkb/server-93538C06A4A7286C4A48C2D2A28CF10F0898BE0D.xkm
[    30.766] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    30.766] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.766] (II) Using input driver 'evdev' for 'Power Button'
[    30.766] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.766] (**) Power Button: always reports core events
[    30.766] (**) evdev: Power Button: Device: "/dev/input/event0"
[    30.766] (--) evdev: Power Button: Vendor 0 Product 0x1
[    30.766] (--) evdev: Power Button: Found keys
[    30.766] (II) evdev: Power Button: Configuring as keyboard
[    30.766] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    30.766] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    30.766] (**) Option "xkb_rules" "evdev"
[    30.766] (**) Option "xkb_model" "pc105"
[    30.766] (**) Option "xkb_layout" "sk"
[    30.767] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event3)
[    30.767] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[    30.767] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[    30.767] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.767] (**) Genius Optical Mouse: always reports core events
[    30.768] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event3"
[    30.768] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[    30.768] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[    30.768] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[    30.768] (--) evdev: Genius Optical Mouse: Found relative axes
[    30.768] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[    30.768] (II) evdev: Genius Optical Mouse: Configuring as mouse
[    30.768] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[    30.768] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[    30.768] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    30.768] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3/event3"
[    30.768] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 8)
[    30.768] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[    30.768] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[    30.768] (**) Genius Optical Mouse: (accel) acceleration profile 0
[    30.768] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[    30.768] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[    30.769] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[    30.769] (II) No input driver specified, ignoring this device.
[    30.769] (II) This device may have been added with another device file.
[    30.770] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    30.770] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    30.770] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    30.770] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.770] (**) AT Translated Set 2 keyboard: always reports core events
[    30.770] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    30.770] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    30.770] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    30.770] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    30.770] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    30.770] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    30.770] (**) Option "xkb_rules" "evdev"
[    30.770] (**) Option "xkb_model" "pc105"
[    30.770] (**) Option "xkb_layout" "sk"
[    31.560] (II) evdev: Power Button: Close
[    31.560] (II) UnloadModule: "evdev"
[    31.560] (II) Unloading evdev
[    31.612] (II) evdev: Power Button: Close
[    31.612] (II) UnloadModule: "evdev"
[    31.612] (II) Unloading evdev
[    31.692] (II) evdev: Genius Optical Mouse: Close
[    31.692] (II) UnloadModule: "evdev"
[    31.692] (II) Unloading evdev
[    31.728] (II) evdev: AT Translated Set 2 keyboard: Close
[    31.728] (II) UnloadModule: "evdev"
[    31.728] (II) Unloading evdev
[    31.729] (II) NOUVEAU(0): NVLeaveVT is called.
[    31.730] (II) NOUVEAU(0): Closed GPU channel 0
[    31.755]  ddxSigGiveUp: Closing log
[    31.755] Server terminated successfully (0). Closing log file.

Takže konečne Xorg log...
« Poslední změna: 08 Října 2014, 21:20:06 od xaser5 »

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #62 kdy: 08 Října 2014, 21:19:07 »
Kód: [Vybrat]
ps -ejH > /cesta/kam_to_chceš_poslat/procesy.txt
Kód: [Vybrat]
  PID  PGID   SID TTY          TIME CMD
    2     0     0 ?        00:00:00 kthreadd
    3     0     0 ?        00:00:01   ksoftirqd/0
    4     0     0 ?        00:00:00   kworker/0:0
    5     0     0 ?        00:00:00   kworker/0:0H
    6     0     0 ?        00:00:00   kworker/u4:0
    7     0     0 ?        00:00:01   rcu_sched
    8     0     0 ?        00:00:00   rcu_bh
    9     0     0 ?        00:00:00   migration/0
   10     0     0 ?        00:00:00   watchdog/0
   11     0     0 ?        00:00:00   watchdog/1
   12     0     0 ?        00:00:00   migration/1
   13     0     0 ?        00:00:00   ksoftirqd/1
   14     0     0 ?        00:00:00   kworker/1:0
   15     0     0 ?        00:00:00   kworker/1:0H
   16     0     0 ?        00:00:00   khelper
   17     0     0 ?        00:00:00   kdevtmpfs
   18     0     0 ?        00:00:00   netns
   19     0     0 ?        00:00:00   writeback
   20     0     0 ?        00:00:00   kintegrityd
   21     0     0 ?        00:00:00   bioset
   22     0     0 ?        00:00:00   kworker/u5:0
   23     0     0 ?        00:00:00   kblockd
   24     0     0 ?        00:00:00   ata_sff
   25     0     0 ?        00:00:00   khubd
   26     0     0 ?        00:00:00   md
   27     0     0 ?        00:00:00   devfreq_wq
   28     0     0 ?        00:00:00   kworker/0:1
   29     0     0 ?        00:00:00   kworker/1:1
   30     0     0 ?        00:00:00   khungtaskd
   31     0     0 ?        00:00:00   kswapd0
   32     0     0 ?        00:00:00   ksmd
   33     0     0 ?        00:00:00   khugepaged
   34     0     0 ?        00:00:00   fsnotify_mark
   35     0     0 ?        00:00:00   ecryptfs-kthrea
   36     0     0 ?        00:00:00   crypto
   48     0     0 ?        00:00:00   kthrotld
   49     0     0 ?        00:00:00   kworker/u4:1
   50     0     0 ?        00:00:00   scsi_eh_0
   51     0     0 ?        00:00:00   scsi_eh_1
   52     0     0 ?        00:00:00   kworker/u4:2
   53     0     0 ?        00:00:00   kworker/u4:3
   54     0     0 ?        00:00:00   kworker/u4:4
   73     0     0 ?        00:00:00   deferwq
   74     0     0 ?        00:00:00   charger_manager
   75     0     0 ?        00:00:00   kworker/1:2
   76     0     0 ?        00:00:00   kworker/u5:1
  245     0     0 ?        00:00:00   jbd2/sda1-8
  246     0     0 ?        00:00:00   ext4-rsv-conver
  900     0     0 ?        00:00:00   krfcommd
    1     1     1 ?        00:00:01 init
  302   301   301 ?        00:00:00   upstart-udev-br
  304   304   304 ?        00:00:00   udevd
  406   304   304 ?        00:00:00     udevd
  469   304   304 ?        00:00:00     udevd
  614   613   613 ?        00:00:00   upstart-socket-
  657   657   657 tty1     00:00:00   recovery-menu
 2918   657   657 tty1     00:00:00     root
 2934  2934   657 tty1     00:00:00       bash
25998 25998   657 tty1     00:00:00         sudo
26100 25998   657 tty1     00:00:00           ps
  880   880   880 ?        00:00:05   dbus-daemon
  887   887   887 ?        00:00:01   modem-manager
  889   889   889 ?        00:00:00   bluetoothd
  901   901   901 ?        00:00:09   NetworkManager
  916   916   901 ?        00:00:00     dhclient
26101 26101   901 ?        00:00:00     dnsmasq
26102   901   901 ?        00:00:00     sh
26103   901   901 ?        00:00:00       resolvconf
  910   880   880 ?        00:00:05   polkitd
  970   970   970 ?        00:00:00   dhclient

Cuore

  • Závislák
  • ****
  • Příspěvků: 2534
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #63 kdy: 08 Října 2014, 21:21:41 »
Xorg.0.log se už generuje, ale havárie se nekoná. Jak se chová boot systému. Jinak tohle
Citace
sudo rm -rf /var/lib/dpkg/lock
rm: nie je možné odstrániť /var/lib/dpkg/lock: súborový systém dovoľuje len čítanie
je důsledek tohoto
Citace
sudo mount / -o remount,rw
první musíš souborový systém připojit pro čtení a zápis a pak mazat, takže
Kód: [Vybrat]
sudo mount / -o remount,rw
sudo rm -rf /var/lib/dpkg/lock
ale jelikož si instaloval, tak tam zámek už není, ještě udělej ten update
Kód: [Vybrat]
sudo apt-get update
sudo apt-get upgrade

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #64 kdy: 08 Října 2014, 21:30:28 »
Urobil som
Kód: [Vybrat]
sudo apt-get update
sudo apt-get upgrade
systém stále štartuje v móde s nízkym rozlíšením, a porom dostanem hlášku že beží LOW GRAPHIC MODE, ďalšiaje tabulka kde sa majú vybrať možnosti ale ja nemôžem nijak sa dostať ďalej, ani nič zmeniť, alebo potvrdiť....
Je to tabulka:
Run in low-graphics mode for just one session
Reconfigure graphics
Troubleshoot the error
Exit to console login


xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #66 kdy: 08 Října 2014, 22:02:51 »
Ja to mám pri normálnom štarte.  Len v tej druhej tabulke sa nedá nič potvrdiť...... Nijako neviem pokračovať...


[příloha smazaná administrátorem]
« Poslední změna: 08 Října 2014, 22:07:32 od xaser5 »

Savalas

  • Člen
  • **
  • Příspěvků: 409
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #67 kdy: 08 Října 2014, 22:11:22 »
Kdyz mas to okno skus jestli se do terminalu dostanes prez ctrl+alt+f1.

Zkusime zase preinstalovani doporucovane na tohle
Kód: [Vybrat]
sudo apt-get install --reinstall ubuntu-desktop
Pripadne grafiku
Kód: [Vybrat]
sudo apt-get install nvidia-currentPo prikazech restart prez prikazem reboot, jestli uz nastartuje normalne
Kód: [Vybrat]
rebootkdyby si to zadavat prez recorvery, tak jako prvni to povoleni zapisu na disk
Kód: [Vybrat]
sudo mount / -o remount,rw
V terminalu po ctrl+alt+f1 to bude chtit po tobe nejspis jmeno a heslo pro pihlaseni.
« Poslední změna: 08 Října 2014, 22:16:40 od Savalas »
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #68 kdy: 08 Října 2014, 22:27:39 »
Ctrl+Alt+F1 prepne, prihlásiť sa dá.
Tak obidva som urobil,ale bez zmeny.....

Na dnes to balím, uvidíme čo prinesie zajtrajšok. Dík všetkým zatiaľ.
« Poslední změna: 08 Října 2014, 22:39:06 od xaser5 »

Savalas

  • Člen
  • **
  • Příspěvků: 409
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #69 kdy: 09 Října 2014, 04:23:21 »
Nedavno tu zminoval nekdo takovou zvlastni chybu, ukaz obsah souboru /etc/fstab , je to textovy soubor bez pripony s konfiguraci pripojeni disku.
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

sabraq

  • Závislák
  • ****
  • Příspěvků: 3395
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #70 kdy: 09 Října 2014, 13:29:54 »
Já bych zvolil to první, abych mohl pracovat v grafických virtuálních terminálech a vůbec v grafice.  Zkusil bych se držet nouveau, nebo-li, systém by pak sám měl nabídnout instalaci proprietárních ovladačů. NEní potřeba být kvůli tomu mimo xservefr, krom toho, i když se přepne do tty1, xserver stále poběží, pokud neprovede sudo service lightdm stop.
************************************

Cuore

  • Závislák
  • ****
  • Příspěvků: 2534
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #71 kdy: 09 Října 2014, 16:42:54 »
Kód: [Vybrat]
cat /etc/fstab a ještě zrovna
Kód: [Vybrat]
ls /etc/X11 by mě zajímalo jestli tam bude xorg.conf pokud máš vše pod otevřeným ovladačem neměl by tam být.

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #72 kdy: 09 Října 2014, 16:47:24 »
Ups, zmazal som príspevok namiesto úpravy..... idem nato, momentík
Fstab:
Kód: [Vybrat]
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda1 during installation
UUID=5661932b-a65d-452b-a0b1-e88f31ab8082 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=4c3640ec-cd05-4865-b646-cec3454e0035 none            swap    sw              0       0
/etc/X11/xorg.conf:
Kód: [Vybrat]
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@swio-display-x86-rh72-03.nvidia.com)  Wed Nov 27 15:15:17 PST 2013

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
Kód: [Vybrat]
ls /etc/X11zobrazí sa mi,ale nepodarilo sa mi to uložiť do súboru,aby som to mohol skopírovať a poslať sem...  :-[ Idem to prepísať...
« Poslední změna: 09 Října 2014, 17:16:05 od xaser5 »

xaser5

  • Člen
  • **
  • Příspěvků: 141
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #73 kdy: 09 Října 2014, 17:21:08 »
Kód: [Vybrat]
ls /etc/X11app-defaults                               X                                      Xreset               Xsession.options
cursors                                           xinit                               Xreset.d            Xwrapper.config
default-display-manager         xkb                                 Xresouces
fonts                                              xorg.conf                      Xsession
rgb.txt                                           xorg.conf.failsafe      Xsession.d

Savalas

  • Člen
  • **
  • Příspěvků: 409
    • Zobrazit profil
Re:Po aktualizácií nenabehne 12.04LTS
« Odpověď #74 kdy: 09 Října 2014, 17:42:31 »
Takze moje podezreni na fstab bylo falesne, ikdyz tam je zvlastnost.
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

 


Provoz zaštiťuje spolek OpenAlt.