Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: beryl a intel 915  (Přečteno 2427 krát)

b-s-h

  • Host
beryl a intel 915
« kdy: 26 Února 2007, 19:28:27 »
Zkouším naistalovat beryl na notebook s grafikou i915.

Nahodil jsem ubuntu 7.04, x.org 7.2 a nainstaloval beryl podle wiki.beryl-project

beryl se mi jednou spustil ale podruhé už vypisuje:

folbrik@folbrik-laptop:~$ beryl-manager
folbrik@folbrik-laptop:~$ **************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : failed

No composite extension
beryl: No composite extension

MarrLiss

  • Stálý člen
  • **
  • Příspěvků: 901
beryl a intel 915
« Odpověď #1 kdy: 26 Února 2007, 20:06:20 »
Nejspis jsi do xorg.conf nedal
Kód: [Vybrat]
Section "Extensions"
        Option "Composite" "Enable"
EndSection
Prestigio Nobile 1590: P-M 740, 1 GB RAM, NV 6600
Ubuntu FF

b-s-h

  • Host
beryl a intel 915
« Odpověď #2 kdy: 26 Února 2007, 22:03:09 »
Dík to bude tim :)

kaisips

  • Návštěvník
  • Příspěvků: 30
beryl a intel 915
« Odpověď #3 kdy: 08 Března 2007, 21:40:14 »
Ja mam podobny problem lenze mne ani po zmene Disable na Enable v
Kód: [Vybrat]
Section "Extensions"
        Option "Composite" "Enable"
EndSection
sa mi nepodarilo rozchodit beryl. Beryl manager spustim lenze po prepnuti v manazery okien z metacity na beryl mi vyhodi toto
Kód: [Vybrat]
**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : NVIDIA

Checking Display :0.0 ...

Checking for XComposite extension               : failed

No composite extension
moj #glxgears -printfps je :
Kód: [Vybrat]
kaisips@Kaisips:~$ glxgears -printfps
8339 frames in 5.0 seconds = 1667.714 FPS
8279 frames in 5.0 seconds = 1655.748 FPS
8344 frames in 5.0 seconds = 1668.703 FPS
8346 frames in 5.0 seconds = 1669.162 FPS
8307 frames in 5.0 seconds = 1661.327 FPS
#glxinfo | grep direct mam :
Kód: [Vybrat]
kaisips@Kaisips:~$ glxinfo | grep direct
direct rendering: Yes
a xorg.conf:
Kód: [Vybrat]
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
        Load    "dbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "sk"
Option "XkbOptions" "lv3:ralt_switch"
Option "XkbVariant" "qwerty"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV15DDR [GeForce2 Ti]"
Driver "nvidia"
BusID "PCI:2:0:0"
       # Option "NvAGP" "1"
        Option          "XAANoOffscreenPixmaps"

EndSection

Section "Monitor"
Identifier "F-419"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV15DDR [GeForce2 Ti]"
Monitor "F-419"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection
Section "Extensions"
        Option "Composite" "Enable"
EndSection
Mam graficku geforce2 TI ,Ubuntu Edgy 6.10

Stretol sa uz niekto s takym problemom ?

kaisips

  • Návštěvník
  • Příspěvků: 30
beryl a intel 915
« Odpověď #4 kdy: 09 Března 2007, 12:01:30 »
Ok uz som ten problem konecne vyriesil :  do časti Section "Screen" som pridal
Kód: [Vybrat]
Option    "DisableGLXRootClipping" "true"
Option    "AddARGBGLXVisuals"    "true"
a do časti Section "Device" som pridal
Kód: [Vybrat]
Option     "AllowGLXWithComposite"    "true"a uz sa mi da krasne prepnut z compiz na beryl co mi vtedy neslo vobec

 

Provoz zaštiťuje spolek OpenAlt.