Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: HP deskjet Advantage 3775  (Přečteno 2846 krát)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
HP deskjet Advantage 3775
« kdy: 15 Září 2020, 18:09:19 »
Mám čerstvě instalované xubuntu 20.04.1, na Mintu se mi nepovedla rozchodit tiskárna.
Na Xubuntu jsem se dostala dál, ale v podstatě také netisknu.. poradil by někdo prosím jak na to?

postupovala jsem podle webu HP a na konci, když už jsem končila, jsem chtěla nechat vytisknout testovací stránku a to už neproběhlo.

Kód: [Vybrat]
zuzik@zuzik-desktop:~/Stažené$ sh hplip-3.20.6.run
Creating directory hplip-3.20.6
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.6 Self Extracting Archive...

HP Linux Imaging and Printing System (ver. 3.20.6)
HPLIP Installer ver. 5.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Tue-15-Sep-2020_15:57:52.log

\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
 

INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : a


INTRODUCTION
------------
This installer will install HPLIP version 3.20.6 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 20.04.

Is "Ubuntu 20.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y

Initializing. Please wait...


ENTER USER PASSWORD
-------------------
Please enter the sudoer (zuzik)'s password:
 

INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.

Please read the installation notes. Press <enter> to continue or 'q' to quit:


SECURITY PACKAGES
-----------------
AppArmor is installed.
AppArmor protects the application from external intrusion attempts making the application secure

Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ? y


RUNNING PRE-INSTALL COMMANDS
----------------------------
OK


MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name         Component            Required/Optional   
libjpeg              base                 REQUIRED           
libtool              base                 REQUIRED           
cups-devel           base                 REQUIRED           
cups-image           base                 REQUIRED           
gcc                  base                 REQUIRED           
make                 base                 REQUIRED           
libpthread           base                 REQUIRED           
libusb               base                 REQUIRED           
sane-devel           scan                 REQUIRED           
xsane                scan                 OPTIONAL           
dbus                 fax                  REQUIRED           
libnetsnmp-devel     network              REQUIRED           
libcrypto            network              REQUIRED           
python3-notify2      gui_qt5              OPTIONAL           
python3-pyqt5-dbus   gui_qt5              OPTIONAL           
python3-pyqt5        gui_qt5              REQUIRED           
python3-devel        base                 REQUIRED           
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ? y


INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: libjpeg (libjpeg - JPEG library)
warning: Missing REQUIRED dependency: libtool (libtool - Library building support services)
warning: Missing REQUIRED dependency: cups-devel (CUPS devel- Common Unix Printing System development files)
warning: Missing REQUIRED dependency: cups-image (CUPS image - CUPS image development files)
warning: Missing REQUIRED dependency: gcc (gcc - GNU Project C and C++ Compiler)
warning: Missing REQUIRED dependency: make (make - GNU make utility to maintain groups of programs)
warning: Missing REQUIRED dependency: libpthread (libpthread - POSIX threads library)
warning: Missing REQUIRED dependency: libusb (libusb - USB library)
warning: Missing REQUIRED dependency: python3-devel (Python devel - Python development files)
warning: Missing REQUIRED dependency: libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)
warning: Missing REQUIRED dependency: libcrypto (libcrypto - OpenSSL cryptographic library)
warning: Missing REQUIRED dependency: python3-pyqt5 (PyQt 5- Qt interface for Python (for Qt version 4.x))
warning: Missing REQUIRED dependency: dbus (DBus - Message bus system)
warning: Missing REQUIRED dependency: sane-devel (SANE - Scanning library development files)


INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing OPTIONAL dependency for option 'gui_qt5': python3-notify2 (Python libnotify - Python bindings for the libnotify Desktop notifications)
warning: Missing OPTIONAL dependency for option 'gui_qt5': python3-pyqt5-dbus (PyQt 5 DBus - DBus Support for PyQt5)
warning: Missing OPTIONAL dependency for option 'scan': xsane (xsane - Graphical scanner frontend for SANE)


CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.


RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK


DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'sudo apt-get install --assume-yes libjpeg-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libtool'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libtool-bin'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes cups-bsd'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes cups-client'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libcupsimage2-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes build-essential'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes build-essential'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes build-essential'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libusb-1.0.0-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libusb-0.1-4'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes python3-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libsnmp-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes snmp-mibs-downloader'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes openssl'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes python3-pyqt5'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes gtk2-engines-pixbuf'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libdbus-1-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes python3-notify2'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes python3-dbus.mainloop.pyqt5'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes gtk2-engines-pixbuf'
Please wait, this may take several minutes...
Running 'sudo apt-get install --no-install-recommends --assume-yes xsane'
Please wait, this may take several minutes...
HPLIP-3.20.3 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'q'= Quit)?    :i
Starting uninstallation...
HPLIP uninstallation is completed


RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK


RE-CHECKING DEPENDENCIES
------------------------
 

RUNNING SCANJET DEPENDENCY COMMANDS
-----------------------------------
sudo apt-get install --assume-yes python3-pip (Scanjet-depend step 1)
sudo pip3 install --upgrade pip (Scanjet-depend step 2)
sudo apt-get install --assume-yes libleptonica-dev (Scanjet-depend step 3)
sudo apt-get install --assume-yes tesseract-ocr (Scanjet-depend step 4)
sudo apt-get install --assume-yes libtesseract-dev (Scanjet-depend step 5)
sudo -H pip3 install tesserocr (Scanjet-depend step 6)
sudo -H pip3 install opencv-python (Scanjet-depend step 7)
sudo -H pip3 install PyPDF2 (Scanjet-depend step 8)
sudo -H pip3 install imutils (Scanjet-depend step 9)
sudo -H pip3 install ocrmypdf (Scanjet-depend step 10)
sudo -H pip3 install scikit-image (Scanjet-depend step 11)
sudo -H pip3 install scipy (Scanjet-depend step 12)
sudo apt-get install --assume-yes qpdf (Scanjet-depend step 13)
OK


PRE-BUILD COMMANDS
------------------
OK


BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib --prefix=/usr --enable-network-build --enable-scan-build --enable-fax-build --enable-dbus-build --disable-qt4 --enable-qt5 --disable-class-driver --enable-doc-build --disable-policykit --disable-libusb01_build --disable-udev_sysfs_rules --enable-hpcups-install --disable-hpijs-install --disable-foomatic-ppd-install --disable-foomatic-drv-install --disable-cups-ppd-install --enable-cups-drv-install --enable-apparmor_build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
Command completed successfully.

Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.


Build complete.



POST-BUILD COMMANDS
-------------------
 

CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...
OK


HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) : y


RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in   
when you started this installer, you will need to either restart your PC or     
unplug and re-plug in your printer (USB cable only). If you choose to restart, 
run this command after restarting: hp-setup (Note: If you are using a parallel 
connection, you will have to restart your PC. If you are using network/wireless,
you can ignore and continue).                                                   

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : p
Please unplug and re-plugin your printer now.  Press <enter> to continue or 'q' to quit:


PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) : u

HP Linux Imaging and Printing System (ver. 3.20.6)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Searching... (bus=usb, search=(None), desc=0)
 
HP Linux Imaging and Printing System (ver. 3.20.6)
System Tray Status Service ver. 2.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.6)
HPLIP upgrade latest version ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

error: Unable to communicate with device (code=12): hp:/usb/DeskJet_3700_series?serial=CN81D3D03506H8
error:  Unable to print to printer.  Please check device and try again.

Done.


RE-STARTING HP_SYSTRAY
----------------------

HP Linux Imaging and Printing System (ver. 3.20.6)
System Tray Status Service ver. 2.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

error: Unable to lock /home/zuzik/.hplip/hp-systray.lock. Is hp-systray already running?
zuzik@zuzik-desktop:~/Stažené$

TIBOR

  • Závislák
  • ***
  • Příspěvků: 6529
  • Som uzivatel linuxovej distribucie, som linuxak?
Re:HP deskjet Advantage 3775
« Odpověď #1 kdy: 15 Září 2020, 18:48:23 »
Kód: [Vybrat]
error: Unable to communicate with device (code=12): hp:/usb/DeskJet_3700_series?serial=CN81D3D03506H8
error:  Unable to print to printer.  Please check device and try again.

Skus odstranit tu tlaciaren, do prehliadaca daj http://localhost:631/ a tam ju skus pridat znova. Ked som presiel na 20.04 tak este hplip neslo tak ako by malo. V tvojom vypise to vyzera ze uz to opravili ale chyba sa moze objavit stale.

P.s aku mas presne tlaciaren.
HP Laptop 17-ca1xxx Ubuntu Mate 22.04 FF 64bit.
Asus X751LB-TY014H Ubuntu Mate 20.04.1 FF 64bit.
Linus, Lajnas, Línus, Luínus, Lajnus a je mi naozaj jedno, ako ľudia vyslovujú moje meno. Ale "Linux" je vždy "Linux". LINUS TORVALDS, tvorca Linuxového jadra.(V dokumente Revolution OS)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
Re:HP deskjet Advantage 3775
« Odpověď #2 kdy: 15 Září 2020, 19:10:21 »
Zkusila jsem, a stále se nedaří.

Je to HP deskjet Ink Advantage 3775

TIBOR

  • Závislák
  • ***
  • Příspěvků: 6529
  • Som uzivatel linuxovej distribucie, som linuxak?
Re:HP deskjet Advantage 3775
« Odpověď #3 kdy: 15 Září 2020, 19:54:42 »
HP Laptop 17-ca1xxx Ubuntu Mate 22.04 FF 64bit.
Asus X751LB-TY014H Ubuntu Mate 20.04.1 FF 64bit.
Linus, Lajnas, Línus, Luínus, Lajnus a je mi naozaj jedno, ako ľudia vyslovujú moje meno. Ale "Linux" je vždy "Linux". LINUS TORVALDS, tvorca Linuxového jadra.(V dokumente Revolution OS)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
Re:HP deskjet Advantage 3775
« Odpověď #4 kdy: 15 Září 2020, 20:01:29 »
No ale mě v 18.04 tiskla ok :-(

TIBOR

  • Závislák
  • ***
  • Příspěvků: 6529
  • Som uzivatel linuxovej distribucie, som linuxak?
Re:HP deskjet Advantage 3775
« Odpověď #5 kdy: 15 Září 2020, 20:09:55 »
Jj, nasiel som ze sme to uz riesili.
https://forum.ubuntu.cz/index.php?topic=83900.0

Co tak vyskusat ten hplip 3.18.6. Pripadne skusobne spustit ubuntu 18.04 a ak tam tlaciaren pojde, pozriet na akom ovladaci vlastne ide.
« Poslední změna: 15 Září 2020, 20:15:20 od TIBOR »
HP Laptop 17-ca1xxx Ubuntu Mate 22.04 FF 64bit.
Asus X751LB-TY014H Ubuntu Mate 20.04.1 FF 64bit.
Linus, Lajnas, Línus, Luínus, Lajnus a je mi naozaj jedno, ako ľudia vyslovujú moje meno. Ale "Linux" je vždy "Linux". LINUS TORVALDS, tvorca Linuxového jadra.(V dokumente Revolution OS)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
Re:HP deskjet Advantage 3775
« Odpověď #6 kdy: 16 Září 2020, 07:12:51 »
No to bych mohla, to je dobrý nápad :-) . Stáhla jsem si tu starou verzi a pak ještě 3.19.6 :-)

Měla bych nejdřív nějak dát pryč ten nový hplip? (pokud ano, jak ideálně?)

TIBOR

  • Závislák
  • ***
  • Příspěvků: 6529
  • Som uzivatel linuxovej distribucie, som linuxak?
Re:HP deskjet Advantage 3775
« Odpověď #7 kdy: 16 Září 2020, 11:27:27 »
Pri preinstalacii na vyssiu verziu si instalator sam odstranuje tu nainstalovanu tak by som skusil spustit instalaciu ten starsej ci si s tym neporadi.

P.s Nezabudaj na zalohu pomocou timeshift(alebo iny softver) aby sa dali opravit pripadne problemy.
HP Laptop 17-ca1xxx Ubuntu Mate 22.04 FF 64bit.
Asus X751LB-TY014H Ubuntu Mate 20.04.1 FF 64bit.
Linus, Lajnas, Línus, Luínus, Lajnus a je mi naozaj jedno, ako ľudia vyslovujú moje meno. Ale "Linux" je vždy "Linux". LINUS TORVALDS, tvorca Linuxového jadra.(V dokumente Revolution OS)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
Re:HP deskjet Advantage 3775
« Odpověď #8 kdy: 17 Září 2020, 10:01:54 »
zalohu? čehopak? - však to stejně nefunguje :-D
- v tom jsem marná :-( umím si jen zazálohovat data :-(

TIBOR

  • Závislák
  • ***
  • Příspěvků: 6529
  • Som uzivatel linuxovej distribucie, som linuxak?
Re:HP deskjet Advantage 3775
« Odpověď #9 kdy: 17 Září 2020, 13:45:03 »
Myslel som celkovo systemu. Pri pokusoch sa moze rozbit cokolvek.
Tiez ak chces skusat tu 18.04 tak staci verziu 20.04 odzalohovat, nainstalovat 18.04 a po skonceni obnovit zalohu 20.04 a do 10 min si na povodnom pouzivanom systeme.
Samozrejme myslene ak nemas dost miesta na instalaciu dalsieho OS.
HP Laptop 17-ca1xxx Ubuntu Mate 22.04 FF 64bit.
Asus X751LB-TY014H Ubuntu Mate 20.04.1 FF 64bit.
Linus, Lajnas, Línus, Luínus, Lajnus a je mi naozaj jedno, ako ľudia vyslovujú moje meno. Ale "Linux" je vždy "Linux". LINUS TORVALDS, tvorca Linuxového jadra.(V dokumente Revolution OS)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
Re:HP deskjet Advantage 3775
« Odpověď #10 kdy: 17 Září 2020, 17:28:25 »
Jo tak, já chci zkusit jen starší verzi hplip, určitě ne starý systém.
Teď jsem to předělávala 3x a už se mi nechceeeee :-)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
Re:HP deskjet Advantage 3775
« Odpověď #11 kdy: 18 Září 2020, 18:04:55 »
Tibore, poradíte prosím jak nejefektivněji odinstalovat hplip?
bude stačit
sudo apt remove hplip ?

TIBOR

  • Závislák
  • ***
  • Příspěvků: 6529
  • Som uzivatel linuxovej distribucie, som linuxak?
Re:HP deskjet Advantage 3775
« Odpověď #12 kdy: 18 Září 2020, 18:20:34 »
To bude asi najbezpecnejsie pretoze pri sudo apt-get purge hplip je poznamka
Kód: [Vybrat]
Pozor!  Odstránenú konfiguráciu / údaje nie je možné obnoviť preinštalovaním balíka.https://installlion.com/ubuntu/xenial/main/h/hplip/uninstall/index.html

P.s Pripadne bude este treba odstranit hplip-gui.
HP Laptop 17-ca1xxx Ubuntu Mate 22.04 FF 64bit.
Asus X751LB-TY014H Ubuntu Mate 20.04.1 FF 64bit.
Linus, Lajnas, Línus, Luínus, Lajnus a je mi naozaj jedno, ako ľudia vyslovujú moje meno. Ale "Linux" je vždy "Linux". LINUS TORVALDS, tvorca Linuxového jadra.(V dokumente Revolution OS)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
Re:HP deskjet Advantage 3775
« Odpověď #13 kdy: 20 Září 2020, 12:33:44 »
No tak mi přijde, že to neproběhlo jak mělo...

Kód: [Vybrat]
sh hplip-3.19.6.run
Creating directory hplip-3.19.6
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.6 Self Extracting Archive...
/home/zuzik/Stažené/hplip-3.19.6/base/utils.py:2061: SyntaxWarning: "is" with a literal. Did you mean "=="?
  if weburl is "" or weburl is None:

HP Linux Imaging and Printing System (ver. 3.19.6)
HPLIP Installer ver. 5.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Sun-20-Sep-2020_12:32:19.log

/home/zuzik/Stažené/hplip-3.19.6/installer/core_install.py:2060: SyntaxWarning: "is" with a literal. Did you mean "=="?
  if home_dir is "":
Traceback (most recent call last):
  File "./install.py", line 241, in <module>
    text_install.start(language, auto, test_depends, test_unknown, assume_network, max_retries, enable, disable)
  File "/home/zuzik/Stažené/hplip-3.19.6/installer/text_install.py", line 63, in start
    core = CoreInstall(MODE_INSTALLER, INTERACTIVE_MODE)
  File "/home/zuzik/Stažené/hplip-3.19.6/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/home/zuzik/Stažené/hplip-3.19.6/base/password.py", line 113, in __init__
    self.__readAuthType()  # self.__authType
  File "/home/zuzik/Stažené/hplip-3.19.6/base/password.py", line 135, in __readAuthType
    distro_name = get_distro_name().lower()
  File "/home/zuzik/Stažené/hplip-3.19.6/base/password.py", line 81, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

TIBOR

  • Závislák
  • ***
  • Příspěvků: 6529
  • Som uzivatel linuxovej distribucie, som linuxak?
Re:HP deskjet Advantage 3775
« Odpověď #14 kdy: 20 Září 2020, 17:39:43 »
/home/zuzik/Stažené/hplip-3.19.6/base/utils.py:2061: SyntaxWarning: "is" with a literal. Did you mean "=="?
  if weburl is "" or weburl is None:

To vyzera na problem s python. V 20.04 je odstranena verzia python ktora je v 18.04 a pre ktoru bolo naprogramovane hplip 3.19.6.

Pripadne to skus spustit z adresara ktory nema diakritiku, ale tipujem to na ten python.
HP Laptop 17-ca1xxx Ubuntu Mate 22.04 FF 64bit.
Asus X751LB-TY014H Ubuntu Mate 20.04.1 FF 64bit.
Linus, Lajnas, Línus, Luínus, Lajnus a je mi naozaj jedno, ako ľudia vyslovujú moje meno. Ale "Linux" je vždy "Linux". LINUS TORVALDS, tvorca Linuxového jadra.(V dokumente Revolution OS)

dredata_zizalka

  • Stálý člen
  • **
  • Příspěvků: 641
Re:HP deskjet Advantage 3775
« Odpověď #15 kdy: 21 Září 2020, 17:43:46 »
Jééj tak to je teda slepá ulička  :o

no nejde mi to (překvapivě) ani na novém Mintu chjo chjo
ten python..
some packages may not get installed on python 3 due to distro incompatibilites :-(

Nebyla by nějaká alternativní cesta?
« Poslední změna: 21 Září 2020, 18:09:43 od dredata_zizalka »

 

Provoz zaštiťuje spolek OpenAlt.