po instalaci a odinstalaci programu Bumblebee nefunguje správně OpenGL

[Deniel]

Nazdar,

měl jsem na notebooku Dell Studio XPS 1340 problémy s vyššími teplotami a tak jsem našel na netu návod jak vypnout dedikovanou grafickou kartu a nechat běžet jenom integrovanou právě pomocí programu Bumblebee. Nepozoroval jsem, ale žádný efekt, navíc se program netvářil, že se nainstaloval správně. Možná nebyl pro můj typ grafické karty. Problém je, že po odinstalování pořád OpenGL nemá výkon a jediné co jede je nevýkonný xserver. Přijde mi divné, že při načítání linuxu po zapnutí (nevím jak to správně nazvat pro Linux, je to ta fáze před tím než vyskočí obrazovka pro login) tam stále vypisuje nějaký "Bumblebee support for Optimus", což by nejspíš neměl když jsem ten program smazal - je to tam vícekrát pod sebou to samé, dejme tomu 6x je tam OK a jednou FAIL. Je nějaký způsob jak obnovit OpenGL do původní formy a případně jak odstranit to nahrávání "Bumblebee" při načítání systému?

Nejsem ještě v linuxu bůh ví jak zběhlý tak případně trochu jednodušeji abych mohl dohledat co a jak V tuhle chvíli je těžké se googlu ptát když nevím jak se správně zeptat a co mě napadlo už jsem zkusil snad všechno a nic nepomohlo. Vrácení starších ovladačů ke kartě, reinstalace balíčků s opengl,... nic.

Už mě nenapadá nic než přeinstalovat, protože tohle se nedá a přitom mi to přijde jako blbina kvůli ovladačům muset reinstalovat  Díky za každou pomoc!!

[František Zatloukal]

Instalaci takovýchto programů(které zasahují do více částí(i klíčových) systému) doporučuji provádět výhradně přes terminál. Zkus tedy znovu Bumblebee nainstalovat (přes terminál a pak jej odinstalovat. Zkopíruj sem prosím celý záznam z terminálu.
Ještě než se do toho pustíš, vlož sem výpisy z :

Kód: [Vybrat]

cat /var/log/Xorg.0.log
glxinfo | grep direct (*když nepujde tak sudo apt-get install mesa-utils udělej a paj glxinfo)


[Deniel]

Tak výstup máme následující,
cat /var/log/Xorg.0.log

Kód: [Vybrat]

[    24.447]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    24.447] X Protocol Version 11, Revision 0
[    24.447] Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu
[    24.447] Current Operating System: Linux Daniel-XPS 3.2.0-27-generic #43-Ubuntu SMP Fri Jul 6 14:25:57 UTC 2012 x86_64
[    24.448] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-27-generic root=UUID=4c49d8a9-6cb1-47b5-90e5-53bcedf1bcb2 ro quiet splash
[    24.448] Build Date: 16 July 2012  08:06:31PM
[    24.448] xorg-server 2:1.11.4-0ubuntu10.6 (For technical support please see http://www.ubuntu.com/support)
[    24.448] Current version of pixman: 0.24.4
[    24.448] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    24.448] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.448] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug  4 22:44:45 2012
[    24.448] (==) Using config file: "/etc/X11/xorg.conf"
[    24.448] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.448] (==) ServerLayout "Layout0"
[    24.448] (**) |-->Screen "Screen0" (0)
[    24.448] (**) |   |-->Monitor "Monitor0"
[    24.448] (**) |   |-->Device "Device0"
[    24.448] (**) |-->Input Device "Keyboard0"
[    24.448] (**) |-->Input Device "Mouse0"
[    24.448] (==) Automatically adding devices
[    24.448] (==) Automatically enabling devices
[    24.448] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.448] Entry deleted from font path.
[    24.448] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    24.448] Entry deleted from font path.
[    24.448] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    24.448] Entry deleted from font path.
[    24.448] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    24.448] Entry deleted from font path.
[    24.448] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    24.448] Entry deleted from font path.
[    24.448] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    24.448] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    24.448] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    24.448] (WW) Disabling Keyboard0
[    24.448] (WW) Disabling Mouse0
[    24.448] (II) Loader magic: 0x7fd199357b00
[    24.449] (II) Module ABI versions:
[    24.449] X.Org ANSI C Emulation: 0.4
[    24.449] X.Org Video Driver: 11.0
[    24.449] X.Org XInput driver : 16.0
[    24.449] X.Org Server Extension : 6.0
[    24.450] (--) PCI: (0:2:0:0) 10de:06e8:1028:0271 rev 161, Mem @ 0xae000000/16777216, 0xd0000000/268435456, 0xac000000/33554432, I/O @ 0x00004000/128
[    24.450] (--) PCI:*(0:3:0:0) 10de:0866:1028:0271 rev 177, Mem @ 0xaa000000/16777216, 0xb0000000/268435456, 0xcc000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
[    24.450] (II) Open ACPI successful (/var/run/acpid.socket)
[    24.450] (II) LoadModule: "extmod"
[    24.464] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    24.464] (II) Module extmod: vendor="X.Org Foundation"
[    24.464] compiled for 1.11.3, module version = 1.0.0
[    24.464] Module class: X.Org Server Extension
[    24.464] ABI class: X.Org Server Extension, version 6.0
[    24.464] (II) Loading extension MIT-SCREEN-SAVER
[    24.464] (II) Loading extension XFree86-VidModeExtension
[    24.464] (II) Loading extension XFree86-DGA
[    24.464] (II) Loading extension DPMS
[    24.464] (II) Loading extension XVideo
[    24.464] (II) Loading extension XVideo-MotionCompensation
[    24.464] (II) Loading extension X-Resource
[    24.464] (II) LoadModule: "dbe"
[    24.464] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    24.464] (II) Module dbe: vendor="X.Org Foundation"
[    24.464] compiled for 1.11.3, module version = 1.0.0
[    24.464] Module class: X.Org Server Extension
[    24.464] ABI class: X.Org Server Extension, version 6.0
[    24.464] (II) Loading extension DOUBLE-BUFFER
[    24.464] (II) LoadModule: "glx"
[    24.464] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    24.691] (II) Module glx: vendor="NVIDIA Corporation"
[    24.691] compiled for 4.0.2, module version = 1.0.0
[    24.691] Module class: X.Org Server Extension
[    24.691] (II) NVIDIA GLX Module  173.14.35  Fri Jun  8 00:57:06 PDT 2012
[    24.691] (II) Loading extension GLX
[    24.691] (II) LoadModule: "record"
[    24.692] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    24.692] (II) Module record: vendor="X.Org Foundation"
[    24.692] compiled for 1.11.3, module version = 1.13.0
[    24.692] Module class: X.Org Server Extension
[    24.692] ABI class: X.Org Server Extension, version 6.0
[    24.692] (II) Loading extension RECORD
[    24.692] (II) LoadModule: "dri"
[    24.692] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    24.692] (II) Module dri: vendor="X.Org Foundation"
[    24.692] compiled for 1.11.3, module version = 1.0.0
[    24.692] ABI class: X.Org Server Extension, version 6.0
[    24.692] (II) Loading extension XFree86-DRI
[    24.692] (II) LoadModule: "dri2"
[    24.692] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    24.693] (II) Module dri2: vendor="X.Org Foundation"
[    24.693] compiled for 1.11.3, module version = 1.2.0
[    24.693] ABI class: X.Org Server Extension, version 6.0
[    24.693] (II) Loading extension DRI2
[    24.693] (II) LoadModule: "nvidia"
[    24.693] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    24.753] (II) Module nvidia: vendor="NVIDIA Corporation"
[    24.753] compiled for 4.0.2, module version = 1.0.0
[    24.753] Module class: X.Org Video Driver
[    24.770] (II) NVIDIA dlloader X Driver  173.14.35  Fri Jun  8 00:33:43 PDT 2012
[    24.770] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    24.770] (++) using VT number 7

[    24.775] (II) Loading sub module "fb"
[    24.775] (II) LoadModule: "fb"
[    24.776] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.776] (II) Module fb: vendor="X.Org Foundation"
[    24.776] compiled for 1.11.3, module version = 1.0.0
[    24.776] ABI class: X.Org ANSI C Emulation, version 0.4
[    24.776] (II) Loading sub module "wfb"
[    24.776] (II) LoadModule: "wfb"
[    24.776] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.776] (II) Module wfb: vendor="X.Org Foundation"
[    24.776] compiled for 1.11.3, module version = 1.0.0
[    24.776] ABI class: X.Org ANSI C Emulation, version 0.4
[    24.776] (II) Loading sub module "ramdac"
[    24.776] (II) LoadModule: "ramdac"
[    24.776] (II) Module "ramdac" already built-in
[    24.779] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    24.779] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.779] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    24.780] (==) NVIDIA(0): RGB weight 888
[    24.780] (==) NVIDIA(0): Default visual is TrueColor
[    24.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    24.780] (**) NVIDIA(0): Option "NoLogo" "True"
[    24.781] (**) NVIDIA(0): Enabling RENDER acceleration
[    24.781] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    24.781] (II) NVIDIA(0):     enabled.
[    25.986] (II) NVIDIA(0): NVIDIA GPU MCP79MX (C79) at PCI:3:0:0 (GPU-0)
[    25.986] (--) NVIDIA(0): Memory: 524288 kBytes
[    25.986] (--) NVIDIA(0): VideoBIOS: 62.79.78.00.02
[    25.986] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    25.986] (--) NVIDIA(0): Connected display device(s) on MCP79MX at PCI:3:0:0:
[    25.986] (--) NVIDIA(0):     AUO (DFP-0)
[    25.986] (--) NVIDIA(0): AUO (DFP-0): 330.0 MHz maximum pixel clock
[    25.986] (--) NVIDIA(0): AUO (DFP-0): Internal Dual Link LVDS
[    25.994] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    25.994] (==) NVIDIA(0):
[    25.994] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    25.994] (==) NVIDIA(0):     will be used as the requested mode.
[    25.994] (==) NVIDIA(0):
[    25.994] (II) NVIDIA(0): Validated modes:
[    25.994] (II) NVIDIA(0):     "nvidia-auto-select"
[    25.994] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[    27.058] (--) NVIDIA(0): DPI set to (112, 112); computed from "UseEdidDpi" X config
[    27.058] (--) NVIDIA(0):     option
[    27.058] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    27.058] (--) Depth 24 pixmap format is 32 bpp
[    27.071] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device PCI:2:0:0.
[    27.071] (EE) NVIDIA(GPU-1):     Please see the COMMON PROBLEMS section in the README for
[    27.071] (EE) NVIDIA(GPU-1):     additional information.
[    27.071] (WW) NVIDIA(GPU-1): Failed to initialize NVIDIA graphics device on GPU PCI:2:0:0!
[    27.074] (II) NVIDIA(0): Initialized GPU GART.
[    27.092] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    27.332] (II) Loading extension NV-GLX
[    27.388] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[    27.389] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[    27.389] (==) NVIDIA(0): Backing store disabled
[    27.389] (==) NVIDIA(0): Silken mouse enabled
[    27.393] (**) NVIDIA(0): DPMS enabled
[    27.393] (II) Loading extension NV-CONTROL
[    27.393] (==) RandR enabled
[    27.393] (II) Initializing built-in extension Generic Event Extension
[    27.393] (II) Initializing built-in extension SHAPE
[    27.393] (II) Initializing built-in extension MIT-SHM
[    27.393] (II) Initializing built-in extension XInputExtension
[    27.393] (II) Initializing built-in extension XTEST
[    27.393] (II) Initializing built-in extension BIG-REQUESTS
[    27.393] (II) Initializing built-in extension SYNC
[    27.393] (II) Initializing built-in extension XKEYBOARD
[    27.393] (II) Initializing built-in extension XC-MISC
[    27.393] (II) Initializing built-in extension SECURITY
[    27.393] (II) Initializing built-in extension XINERAMA
[    27.393] (II) Initializing built-in extension XFIXES
[    27.393] (II) Initializing built-in extension RENDER
[    27.393] (II) Initializing built-in extension RANDR
[    27.393] (II) Initializing built-in extension COMPOSITE
[    27.393] (II) Initializing built-in extension DAMAGE
[    27.395] (II) Initializing extension GLX
[    27.505] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    27.507] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    27.507] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.507] (II) LoadModule: "evdev"
[    27.507] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.508] (II) Module evdev: vendor="X.Org Foundation"
[    27.508] compiled for 1.11.3, module version = 2.7.0
[    27.508] Module class: X.Org XInput Driver
[    27.508] ABI class: X.Org XInput driver, version 16.0
[    27.508] (II) Using input driver 'evdev' for 'Power Button'
[    27.508] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.508] (**) Power Button: always reports core events
[    27.508] (**) evdev: Power Button: Device: "/dev/input/event3"
[    27.508] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.508] (--) evdev: Power Button: Found keys
[    27.508] (II) evdev: Power Button: Configuring as keyboard
[    27.508] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    27.508] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    27.508] (**) Option "xkb_rules" "evdev"
[    27.508] (**) Option "xkb_model" "pc105"
[    27.508] (**) Option "xkb_layout" "cz"
[    27.509] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[    27.510] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    27.510] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.510] (II) Using input driver 'evdev' for 'Video Bus'
[    27.510] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.510] (**) Video Bus: always reports core events
[    27.510] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    27.510] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.510] (--) evdev: Video Bus: Found keys
[    27.510] (II) evdev: Video Bus: Configuring as keyboard
[    27.510] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input5/event5"
[    27.510] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    27.510] (**) Option "xkb_rules" "evdev"
[    27.510] (**) Option "xkb_model" "pc105"
[    27.510] (**) Option "xkb_layout" "cz"
[    27.511] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    27.511] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.511] (II) Using input driver 'evdev' for 'Video Bus'
[    27.511] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.511] (**) Video Bus: always reports core events
[    27.511] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    27.511] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.511] (--) evdev: Video Bus: Found keys
[    27.511] (II) evdev: Video Bus: Configuring as keyboard
[    27.511] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input6/event6"
[    27.511] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    27.511] (**) Option "xkb_rules" "evdev"
[    27.511] (**) Option "xkb_model" "pc105"
[    27.511] (**) Option "xkb_layout" "cz"
[    27.511] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    27.511] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    27.511] (II) Using input driver 'evdev' for 'Sleep Button'
[    27.511] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.511] (**) Sleep Button: always reports core events
[    27.511] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    27.511] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    27.511] (--) evdev: Sleep Button: Found keys
[    27.511] (II) evdev: Sleep Button: Configuring as keyboard
[    27.511] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input1/event1"
[    27.511] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    27.511] (**) Option "xkb_rules" "evdev"
[    27.511] (**) Option "xkb_model" "pc105"
[    27.511] (**) Option "xkb_layout" "cz"
[    27.512] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    27.512] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.512] (II) Using input driver 'evdev' for 'Power Button'
[    27.512] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.512] (**) Power Button: always reports core events
[    27.512] (**) evdev: Power Button: Device: "/dev/input/event0"
[    27.512] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.512] (--) evdev: Power Button: Found keys
[    27.512] (II) evdev: Power Button: Configuring as keyboard
[    27.512] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    27.512] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[    27.512] (**) Option "xkb_rules" "evdev"
[    27.512] (**) Option "xkb_model" "pc105"
[    27.512] (**) Option "xkb_layout" "cz"
[    27.513] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    27.513] (II) No input driver specified, ignoring this device.
[    27.513] (II) This device may have been added with another device file.
[    27.513] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2M (/dev/input/event9)
[    27.513] (**) Laptop_Integrated_Webcam_2M: Applying InputClass "evdev keyboard catchall"
[    27.513] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2M'
[    27.513] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.513] (**) Laptop_Integrated_Webcam_2M: always reports core events
[    27.513] (**) evdev: Laptop_Integrated_Webcam_2M: Device: "/dev/input/event9"
[    27.513] (--) evdev: Laptop_Integrated_Webcam_2M: Vendor 0xc45 Product 0x63fa
[    27.513] (--) evdev: Laptop_Integrated_Webcam_2M: Found keys
[    27.513] (II) evdev: Laptop_Integrated_Webcam_2M: Configuring as keyboard
[    27.513] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input9/event9"
[    27.513] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2M" (type: KEYBOARD, id 11)
[    27.513] (**) Option "xkb_rules" "evdev"
[    27.513] (**) Option "xkb_model" "pc105"
[    27.513] (**) Option "xkb_layout" "cz"
[    27.513] (II) config/udev: Adding input device HDA NVidia Mic (/dev/input/event12)
[    27.513] (II) No input driver specified, ignoring this device.
[    27.513] (II) This device may have been added with another device file.
[    27.514] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    27.514] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    27.514] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    27.514] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.514] (**) AT Translated Set 2 keyboard: always reports core events
[    27.514] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    27.514] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    27.514] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    27.514] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    27.514] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    27.514] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    27.514] (**) Option "xkb_rules" "evdev"
[    27.514] (**) Option "xkb_model" "pc105"
[    27.514] (**) Option "xkb_layout" "cz"
[    27.514] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    27.514] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    27.514] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    27.514] (II) LoadModule: "synaptics"
[    27.514] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    27.515] (II) Module synaptics: vendor="X.Org Foundation"
[    27.515] compiled for 1.11.3, module version = 1.6.2
[    27.515] Module class: X.Org XInput Driver
[    27.515] ABI class: X.Org XInput driver, version 16.0
[    27.515] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    27.515] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    27.515] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.515] (**) Option "Device" "/dev/input/event11"
[    27.520] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    27.520] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    27.520] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5260
[    27.520] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    27.520] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    27.520] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    27.520] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    27.520] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    27.520] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    27.524] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    27.524] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    27.524] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    27.524] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.034
[    27.524] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    27.524] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    27.524] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    27.524] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    27.524] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    27.524] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    27.524] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    27.526] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
[    27.526] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    27.526] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    27.526] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.526] (**) Dell WMI hotkeys: always reports core events
[    27.526] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event10"
[    27.526] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    27.526] (--) evdev: Dell WMI hotkeys: Found keys
[    27.526] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    27.526] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event10"
[    27.526] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    27.526] (**) Option "xkb_rules" "evdev"
[    27.526] (**) Option "xkb_model" "pc105"
[    27.526] (**) Option "xkb_layout" "cz"
[    27.527] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ite-cir) (/dev/input/event8)
[    27.527] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "evdev pointer catchall"
[    27.527] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "evdev keyboard catchall"
[    27.527] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (ite-cir)'
[    27.527] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.527] (**) MCE IR Keyboard/Mouse (ite-cir): always reports core events
[    27.527] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): Device: "/dev/input/event8"
[    27.527] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Vendor 0 Product 0
[    27.527] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found 3 mouse buttons
[    27.527] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found relative axes
[    27.527] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found x and y relative axes
[    27.527] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found keys
[    27.527] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): Configuring as mouse
[    27.527] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): Configuring as keyboard
[    27.527] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): YAxisMapping: buttons 4 and 5
[    27.527] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.527] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[    27.527] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (ite-cir)" (type: KEYBOARD, id 15)
[    27.527] (**) Option "xkb_rules" "evdev"
[    27.527] (**) Option "xkb_model" "pc105"
[    27.527] (**) Option "xkb_layout" "cz"
[    27.527] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): initialized for relative axes.
[    27.527] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) keeping acceleration scheme 1
[    27.527] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration profile 0
[    27.527] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration factor: 2.000
[    27.527] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration threshold: 4
[    27.527] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ite-cir) (/dev/input/mouse0)
[    27.527] (II) No input driver specified, ignoring this device.
[    27.527] (II) This device may have been added with another device file.
[    27.528] (II) config/udev: Adding input device ITE8708 CIR transceiver (/dev/input/event7)
[    27.528] (**) ITE8708 CIR transceiver: Applying InputClass "evdev keyboard catchall"
[    27.528] (II) Using input driver 'evdev' for 'ITE8708 CIR transceiver'
[    27.528] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.528] (**) ITE8708 CIR transceiver: always reports core events
[    27.528] (**) evdev: ITE8708 CIR transceiver: Device: "/dev/input/event7"
[    27.528] (--) evdev: ITE8708 CIR transceiver: Vendor 0x1283 Product 0
[    27.528] (--) evdev: ITE8708 CIR transceiver: Found keys
[    27.528] (II) evdev: ITE8708 CIR transceiver: Configuring as keyboard
[    27.528] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input7/event7"
[    27.528] (II) XINPUT: Adding extended input device "ITE8708 CIR transceiver" (type: KEYBOARD, id 16)
[    27.528] (**) Option "xkb_rules" "evdev"
[    27.528] (**) Option "xkb_model" "pc105"
[    27.528] (**) Option "xkb_layout" "cz"
[    33.333] (II) XKB: reuse xkmfile /var/lib/xkb/server-2D44F63C6B1760103172E819D59C46EC07051829.xkm

Potom glxinfo | grep direct

Kód: [Vybrat]

direct rendering: Yes
Log z instalace:

Kód: [Vybrat]

daniel@Daniel-XPS:~$ sudo apt-get install bumblebee bumblebee-nvidia
Čtu seznamy balíků… Hotovo
Vytvářím strom závislostí       
Čtu stavové informace… Hotovo
Následující extra balíky budou instalovány:
  bbswitch-dkms libturbojpeg libturbojpeg:i386 virtualgl virtualgl-libs virtualgl-libs:i386 virtualgl-libs-ia32:i386
Doporučované balíky:
  virtualgl-libs-ia32
Následující NOVÉ balíky budou nainstalovány:
  bbswitch-dkms bumblebee bumblebee-nvidia libturbojpeg libturbojpeg:i386 virtualgl virtualgl-libs virtualgl-libs:i386
  virtualgl-libs-ia32:i386
0 aktualizováno, 9 nově instalováno, 0 k odstranění a 0 neaktualizováno.
Potřebuji stáhnout 1 326 kB/1 574 kB archivů.
Po této operaci bude na disku použito dalších 3 607 kB.
Chcete pokračovat [Y/n]? y
Mám:1 http://ppa.launchpad.net/bumblebee/stable/ubuntu/ precise/main virtualgl-libs amd64 2.3.1-2~preciseppa1 [211 kB]
Mám:2 http://ppa.launchpad.net/bumblebee/stable/ubuntu/ precise/main virtualgl-libs i386 2.3.1-2~preciseppa1 [201 kB]
Mám:3 http://ppa.launchpad.net/bumblebee/stable/ubuntu/ precise/main virtualgl amd64 2.3.1-2~preciseppa1 [846 kB]
Mám:4 http://ppa.launchpad.net/bumblebee/stable/ubuntu/ precise/main bbswitch-dkms all 0.4.2-2~preciseppa1 [10,1 kB]
Mám:5 http://ppa.launchpad.net/bumblebee/stable/ubuntu/ precise/main bumblebee amd64 3.0.1-1~preciseppa1 [52,3 kB]
Mám:6 http://ppa.launchpad.net/bumblebee/stable/ubuntu/ precise/main bumblebee-nvidia amd64 3.0.1-1~preciseppa1 [3 438 B]
Mám:7 http://ppa.launchpad.net/bumblebee/stable/ubuntu/ precise/main virtualgl-libs-ia32 i386 2.3.1-2~preciseppa1 [2 096 B]
Staženo 1 326 kB za 2s (600 kB/s)           
Selecting previously unselected package libturbojpeg.
(Čtu databázi … nyní je nainstalováno 209079 souborů a adresářů.)
Rozbaluji libturbojpeg (z …/libturbojpeg_1.1.90+svn733-0ubuntu4.1_amd64.deb) …
Selecting previously unselected package libturbojpeg:i386.
Rozbaluji libturbojpeg:i386 (z …/libturbojpeg_1.1.90+svn733-0ubuntu4.1_i386.deb) …
Selecting previously unselected package virtualgl-libs.
Rozbaluji virtualgl-libs (z …/virtualgl-libs_2.3.1-2~preciseppa1_amd64.deb) …
Selecting previously unselected package virtualgl-libs:i386.
Rozbaluji virtualgl-libs:i386 (z …/virtualgl-libs_2.3.1-2~preciseppa1_i386.deb) …
Selecting previously unselected package virtualgl.
Rozbaluji virtualgl (z …/virtualgl_2.3.1-2~preciseppa1_amd64.deb) …
Selecting previously unselected package bbswitch-dkms.
Rozbaluji bbswitch-dkms (z …/bbswitch-dkms_0.4.2-2~preciseppa1_all.deb) …
Selecting previously unselected package bumblebee.
Rozbaluji bumblebee (z …/bumblebee_3.0.1-1~preciseppa1_amd64.deb) …
Selecting previously unselected package bumblebee-nvidia.
Rozbaluji bumblebee-nvidia (z …/bumblebee-nvidia_3.0.1-1~preciseppa1_amd64.deb) …
Selecting previously unselected package virtualgl-libs-ia32:i386.
Rozbaluji virtualgl-libs-ia32:i386 (z …/virtualgl-libs-ia32_2.3.1-2~preciseppa1_i386.deb) …
Zpracování spouštěčů pro balík man-db …
Zpracování spouštěčů pro balík ureadahead …
ureadahead will be reprofiled on next reboot
Nastavuji balík libturbojpeg (1.1.90+svn733-0ubuntu4.1) …
Nastavuji balík libturbojpeg:i386 (1.1.90+svn733-0ubuntu4.1) …
Nastavuji balík virtualgl-libs (2.3.1-2~preciseppa1) …
Nastavuji balík virtualgl-libs:i386 (2.3.1-2~preciseppa1) …
Nastavuji balík virtualgl (2.3.1-2~preciseppa1) …
Nastavuji balík bbswitch-dkms (0.4.2-2~preciseppa1) …
Loading new bbswitch-0.4.2 DKMS files...
First Installation: checking all kernels...
Building only for 3.2.0-27-generic
Building initial module for 3.2.0-27-generic
Done.

bbswitch:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/3.2.0-27-generic/updates/dkms/

depmod.......

DKMS: install completed.
Nastavuji balík bumblebee (3.0.1-1~preciseppa1) …
update-initramfs: deferring update (trigger activated)
bumblebeed start/running, process 5009
Nastavuji balík bumblebee-nvidia (3.0.1-1~preciseppa1) …
update-alternatives: používám /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf pro poskytnutí /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf), ruční režim.
update-alternatives: používám /usr/lib/i386-linux-gnu/mesa/ld.so.conf pro poskytnutí /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf), ruční režim.
bumblebeed start/running, process 5068
Nastavuji balík virtualgl-libs-ia32:i386 (2.3.1-2~preciseppa1) …
Zpracování spouštěčů pro balík libc-bin …
ldconfig deferred processing now taking place
Zpracování spouštěčů pro balík initramfs-tools …
update-initramfs: Generating /boot/initrd.img-3.2.0-27-generic
kbuildsycoca4 running...
                        Error: "/var/tmp/kdecache-daniel" is owned by uid 1000 instead of uid 0.
                                                                                                daniel@Daniel-XPS:~$
a výpis z odinstalace:

Kód: [Vybrat]

daniel@Daniel-XPS:/etc$ sudo apt-get remove bumblebee bumblebee-nvidia
Čtu seznamy balíků… Hotovo
Vytvářím strom závislostí       
Čtu stavové informace… Hotovo
Následující balíky byly nainstalovány automaticky a již nejsou potřeba:
  virtualgl virtualgl-libs-ia32:i386 libturbojpeg libturbojpeg:i386 virtualgl-libs virtualgl-libs:i386 bbswitch-dkms
Pro jejich odstranění použijte „apt-get autoremove“.
Následující balíky budou ODSTRANĚNY:
  bumblebee bumblebee-nvidia
0 aktualizováno, 0 nově instalováno, 2 k odstranění a 0 neaktualizováno.
Po této operaci bude na disku uvolněno 219 kB.
Chcete pokračovat [Y/n]? y
(Čtu databázi … nyní je nainstalováno 209169 souborů a adresářů.)
Odinstalování balíku bumblebee-nvidia …
update-alternatives: používám /usr/lib/nvidia-current-updates/ld.so.conf pro poskytnutí /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf), automatický režim.
update-alternatives: používám /usr/lib/nvidia-current-updates/alt_ld.so.conf pro poskytnutí /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf), automatický režim.
Odinstalování balíku bumblebee …
update-initramfs: deferring update (trigger activated)
Zpracování spouštěčů pro balík libc-bin …
ldconfig deferred processing now taking place
Zpracování spouštěčů pro balík ureadahead …
Zpracování spouštěčů pro balík man-db …
Zpracování spouštěčů pro balík initramfs-tools …
update-initramfs: Generating /boot/initrd.img-3.2.0-27-generic
kbuildsycoca4 running...
                        Error: "/var/tmp/kdecache-daniel" is owned by uid 1000 instead of uid 0.
                                                                                                daniel@Daniel-XPS:/etc$
Ještě přidám, že když jsem spustil Bumblebee pomocí příkazu Bumblebeed tak mi napsal, že nemám "optimus" a vlastně nic neudělal. O to divnější, že to je tak jak to je. Snad v tom něco uvidíš Díky moc!

Dodatek - ovladače na Nvidii jsem si pak reinstaloval sám, protože to nějak rozhodilo i monitor a neměl jsem ani možnost jet v nativním rozlišení 1280x800. Aktuálně tam je verze NVIDIA-Linux-x86_64-173.14.35-pkg2.run. Instaloval jsem přes tty takže tam by problém být neměl - zdá se že funguje (mohu volit správná rozlišení a podobné).