leadtek winfast tv2000 - no signal, blue screen

[Rawen]

snažím se už drahně dlouho rozjet tuto kartu na Xubuntu, ale nějak se mi to nedaří,
postupoval jsem takto:

sudo rmmod bt878
sudo rmmod tuner
sudo rmmod bttv
sudo modprobe bttv card=34 tuner=43

všechno přijato OK

výpis z dmesg:
[   29.084000] bttv: driver version 0.9.16 loaded
[   29.084000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   29.084000] bttv: Host bridge needs ETBF enabled.
[   29.084000] bttv: Bt8xx card found (0).
[   29.084000] bttv0: Bt878 (rev 17) at 0000:00:11.0, irq: 5, latency: 64, mmio: 0xf0021000
[   29.084000] bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
[   29.084000] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
[   29.084000] bttv0: enabling ETBF (430FX/VP3 compatibilty)
[   29.084000] bttv0: gpio: en=00000000, out=00000000 in=00bff706 [init]
[   29.084000] bttv0: using tuner=43
[   29.084000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[   29.084000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[   29.084000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[   29.084000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[   29.144000] bttv0: registered device video0
[   29.144000] bttv0: registered device vbi0
[   29.144000] bttv0: registered device radio0
[   29.144000] bttv0: PLL: 28636363 => 35468950 .. ok
[   29.176000] input: bttv IR (card=34) as /class/input/input2

výpis z lspci -vv:
00:11.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
        Subsystem: LeadTek Research Inc. WinFast TV 2000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at f0021000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Subsystem: LeadTek Research Inc. Unknown device 6606
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64 (1000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at f0022000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

výpis z tvtime -v:
cpuinfo: CPU Pentium III (Coppermine), family 6, model 8, stepping 6.
cpuinfo: CPU measured at 801,930MHz.
xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 70200000
xfullscreen: Single-head detected, pixel aspect will be calculated.
xfullscreen: Pixel aspect ratio on the primary head is: 1368/1355 == 1,01.
xfullscreen: Using the XFree86-VidModeExtension to calculate fullscreen size.
xfullscreen: Fullscreen to 0,0 with size 1280x1024.
xcommon: Have XTest, will use it to ping the screensaver.
xcommon: Pixel aspect ratio 1:1.
xcommon: Pixel aspect ratio 1:1.
xcommon: Window manager is Xfwm4 and is EWMH compliant.
xcommon: Using EWMH state fullscreen property.
xcommon: Using EWMH state above property.
xcommon: Using EWMH state below property.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xvoutput: Using XVIDEO adaptor 306: NV05 Video Blitter.
speedycode: Using MMXEXT optimized functions.
station: Reading stationlist from /home/rawen/.tvtime/stationlist.xml
/home/rawen/.tvtime/stationlist.xml: No existing PAL station list "custom".
station: Adding frequency table custom, all channels active
videoinput: Using video4linux2 driver 'bttv', card 'BT878 video (Leadtek WinFast 20' (bus PCI:0000:00:11.0).
videoinput: Version is 2320, capabilities 5010015.
videoinput: Maximum input width: 924 pixels.
tvtime: Sampling input at 720 pixels per scanline.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xcommon: Received a map, marking window as visible (67).

když se tvtime spustí tak se objeví modrá obrazovka a nápis no signal, nepomáhá nic - žádné přepínání video source, různých formátů atd... je to furt to samé... poradí mi někdo?

PS: ještě dodám že na tomto kompu mám i XPčka a tam to taky nějak nejede - obdobným způsobem a to na softwaru co mám k té kartě, na druhou stranu jsem zkoušel tuto kartu strčit do jednoho staršího PC a tam šla v pohodě... jinak ještě pro jistotu HW info: mám Geforce3 TI200, 512MB Ram, PIII 800 Mhz, SBLive5.1, motherboard MSI 6163 BXMaster

[Rawen]

no tak po reinstallu to jde, jen je nutné v xorg.conf nahrát modul "v4l" - to byla možná ta má chybka

[fritzek]

Zakladem je vypnout detekci signalu v tvtime. Dale nikde v prispevku nevidim, ze byste ladil kanaly pomoci tvtime-scanner. Jestli jste neladil a mate zapnutou detekci signalu, tak je modra obrazovka v poradku