Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Jak editovat xorg.conf pro podporu TV-OUT  (Přečteno 2511 krát)

Dava

  • Aktivní člen
  • *
  • Příspěvků: 121
    • http://www.pohori.cz
Jak editovat xorg.conf pro podporu TV-OUT
« kdy: 24 Května 2007, 12:45:48 »
Pokousel jsem se asi 50x o configuraci xorg.conf, ale bohuzel vzdy dopadnu stejne... vubec nenabehne graficke prostredi. Pomuze mi nekdo konkretne s moji konfiguraci tak, aby bylo mozne pouzivat muj ntb. i na prehravani na TV? Je mi jedno, jestli to budou dva monitory, nebo klon... i kdyz nejlepsi by asi bylo dva desktopy zvlast. Muj xorg:


Kód: [Vybrat]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]"
Driver "ati"
BusID "PCI:1:5:0"
EndSection

Section "Monitor"
Identifier "Obecný monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]"
Monitor "Obecný monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

hybera

  • Návštěvník
  • Příspěvků: 27
Jak editovat xorg.conf pro podporu TV-OUT
« Odpověď #1 kdy: 24 Května 2007, 14:12:12 »

Dava

  • Aktivní člen
  • *
  • Příspěvků: 121
    • http://www.pohori.cz
Jak editovat xorg.conf pro podporu TV-OUT
« Odpověď #2 kdy: 24 Května 2007, 14:40:15 »
Citace: hybera
A tohle by Ti nepomohlo ?

http://www.abclinuxu.cz/forum/show/130804
:-D  Jo, tohle jsem myslim take videl... problem je, ze takovych ruznych navodu je na forech milion. Jenze ja nejsem natolik fundovany, abych vedel jak presne upravit ten muj.  :(

Podivej se co je v nem udaju a delat to metodou pokus omyl je na hodne dlouho... obzvlaste, kdyz vubec nevis co delas a kdyz je mezi nami urcite nekdo, kdo muj vypis zkoukne a hned vidi co je spatne.  ;)

Ale diky moc za snahu  ;)

Dava

  • Aktivní člen
  • *
  • Příspěvků: 121
    • http://www.pohori.cz
Jak editovat xorg.conf pro podporu TV-OUT
« Odpověď #3 kdy: 01 Června 2007, 21:20:03 »
Bohuzel mi nikdo nepomohl, ale je to nakonec vyreseno... pomohl mi tento vseobecny navod http://aboutme.ic.cz/?q=node/40 kde je dokonaly rozbor souboru xorg.conf.  

Treba to nekomu pomuze take  ;)

 

Provoz zaštiťuje spolek OpenAlt.