Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

« předchozí další »
Stran: [1]

Autor Téma: Dual monitor Ubuntu 7.04 a ATI karta  (Přečteno 1512 krát)

filip.kotian

  • Návštěvník
  • Příspěvků: 8
Dual monitor Ubuntu 7.04 a ATI karta
« kdy: 31 Května 2007, 20:43:28 »
Mam taky jeden problem, snazil som sa nadstavit dual monitory na mojom notebooku, kvoli dataprojektoru. skusal som to doma na monitore. ked som upravil konfigurak tak mi isiel obraz len na CRT monitore a nie na notebooku. Nech som skusal menit nadstavenia ako som len chcel neslo to nikdy na oboch a ked som nemal pripojeny CRT tak na mojom notebooku zostala len cierna obrazovka. system isiel ale obraz nie.

tu je moj konfigurak:

Kód: [Vybrat]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
#FontPath "/usr/share/fonts/X11/misc"
#FontPath "/usr/share/fonts/X11/cyrillic"
#FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
#FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
#FontPath "/usr/share/fonts/X11/Type1"
#FontPath "/usr/share/fonts/X11/100dpi"
#FontPath "/usr/share/fonts/X11/75dpi"


FontPath    "/usr/share/fonts/misc:unscaled"
FontPath    "/usr/share/fonts/Type1"
FontPath    "/usr/share/fonts/TTF"
FontPath    "/usr/share/fonts/corefonts"
FontPath    "/usr/share/fonts/freefont"
FontPath    "/usr/share/fonts/sharefonts"
FontPath    "/usr/share/fonts/terminus"
FontPath    "/usr/share/fonts/ttf-bitstream-vera"
FontPath    "/usr/share/fonts/unifont"
FontPath    "/usr/share/fonts/75dpi:unscaled"
FontPath    "/usr/share/fonts/100dpi:unscaled"
FontPath    "/usr/share/fonts/artwiz"
  FontPath    "/usr/share/fonts/myfonts"

# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
        Load "dbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "sk"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
        Identifier     "Device LCD"
        Driver          "radeon"
        BusID           "PCI:3:0:0"
        Option          "XAANoOffscreenPixmaps"
        Option "AGPMode" "4"
        Option "AGPFastWrite" "true"
        Option "DisableGLXRootClipping" "true"
        Option "AddARGBGLXVisuals" "true"
        Option "AllowGLXWithComposite" "true"
        Option "EnablePageFlip" "true"
Option "MonitorLayout" "NONE,LFP"
EndSection

Section "Device"
        Identifier      "Device CRT"
        Driver          "radeon"
        BusID           "PCI:3:0:0"
        Option          "XAANoOffscreenPixmaps"
        Option "AGPMode" "4"
        Option "AGPFastWrite" "true"
        Option "DisableGLXRootClipping" "true"
        Option "AddARGBGLXVisuals" "true"
        Option "AllowGLXWithComposite" "true"
        Option "EnablePageFlip" "true"
        Option          "MonitorLayout" "NONE,CRT"
EndSection

Section "Device"
        Identifier     "Device LCD dual"
        Driver          "radeon"
        BusID           "PCI:3:0:0"
        Option          "XAANoOffscreenPixmaps"
        Option "AGPMode" "4"
        Option "AGPFastWrite" "true"
        Option "DisableGLXRootClipping" "true"
        Option "AddARGBGLXVisuals" "true"
        Option "AllowGLXWithComposite" "true"
        Option "EnablePageFlip" "true"
Screen 0
Option "MonitorLayout" "CRT,LFP"
VideoRam 65536
EndSection


Section "Device"
Identifier "Device CRT dual"
Driver "radeon"
BusID "PCI:3:0:0"
        Option          "XAANoOffscreenPixmaps"
        Option "AGPMode" "4"
        Option "AGPFastWrite" "true"
        Option "DisableGLXRootClipping" "true"
        Option "AddARGBGLXVisuals" "true"
        Option "AllowGLXWithComposite" "true"
        Option "EnablePageFlip" "true"
Screen 1
VideoRam 65536
Option "DevicePresence" "true"
EndSection

Section "Monitor"
        Identifier      "Monitor LCD"
        Option          "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor CRT"
Option "DPMS"
EndSection


Section "Screen"
Identifier "Screen LCD"
Device "Device LCD"
Monitor "Monitor LCD"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen CRT"
Device "Device CRT"
Monitor "Monitor CRT"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection


Section "Screen"
Identifier "Screen CRT dual"
Device "Device CRT dual"
Monitor "Monitor CRT"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes   "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen LCD dual"
Device "Device LCD dual"
Monitor "Monitor LCD"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Option          "AIGLX"         "true"
Identifier "Dual"
Screen 0 "Screen LCD dual"
Screen 1 "Screen CRT dual" LeftOf "Screen LCD dual"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
#Option "Xinerama" "true"
#Option "Clone" "On"
EndSection

Section "ServerLayout"
Option          "AIGLX"         "true"
Identifier "CRT"
Screen "Screen CRT"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Section "ServerLayout"
Option          "AIGLX"         "true"
Identifier "LCD"
Screen "Screen LCD"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection


Section "ServerFlags"
       Option         "DefaultServerLayout" "LCD"
       #Option         "DefaultServerLayout" "CRT"
       #Option          "DefaultServerLayout" "Dual"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSectiondakujem vam!!

filipo
IP zaznamenána

filip.kotian

  • Návštěvník
  • Příspěvků: 8
Dual monitor Ubuntu 7.04 a ATI karta
« Odpověď #1 kdy: 31 Května 2007, 20:45:26 »
este som zabudol to je upraveny pre dual monitory, pricom bezne pouzivam tento

Kód: [Vybrat]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
        Load "dbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "sk"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
        Identifier     "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
        Driver          "radeon"
        BusID           "PCI:3:0:0"
        Option          "XAANoOffscreenPixmaps"
        Option "AGPMode" "4"
        Option "AGPFastWrite" "true"
        Option "DisableGLXRootClipping" "true"
        Option "AddARGBGLXVisuals" "true"
        Option "AllowGLXWithComposite" "true"
        Option "EnablePageFlip" "true"
EndSection

Section "Monitor"
Identifier "Všeobecný monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Monitor "Všeobecný monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Option          "AIGLX"         "true"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection
IP zaznamenána

LABE

  • Návštěvník
  • Příspěvků: 87
    • PĚTATŘICÁTNÍCI
Dual monitor Ubuntu 7.04 a ATI karta
« Odpověď #2 kdy: 04 Června 2007, 12:40:27 »
Mne to taky nemakalo a co jsem prisel na Ubuntu 7.04 tak to jede.Akorat musim prijit na to , jak nastavit projektor jako hlavni a zpet. Kdyz ho zapnu , vse na nem bezi , na lcd taky . Kdyz dam prehrat film , tak na lcd jede a na projektoru je cerna obrazovka a plocha .Mám taky Ati.
IP zaznamenána
LABE
běžný uživatel Ubuntu, Mintu a naštěstí již jen pracovně případně nouzově  Windows
Admin https://www.petatricatnici.eu/
Stran: [1]
« předchozí další »
 

Provoz zaštiťuje spolek OpenAlt.