Autor Téma: Nefunkční zvuk bez manuálního nastavení hlasitosti (Přečteno 7673 krát)

standa · « **kdy:** 14 Června 2007, 17:22:50 »

Zapnu UBUNTU 7.04 a nejde zvuk. Musím pohýbat jezdcem v ovládání hlasitosti a pak je slyšet potřebné. Proč to tak je ???? Jak to odstranit ???? DĚKUJI *S*

Jakub Lucký · « **Odpověď #1 kdy:** 14 Června 2007, 17:55:39 »

Není zvuk ztlumený (Mute)?
Nebyl zvuk tak nízko, že je vypnutý?
Děje se to vždy?

P.S. Přejmenováno

standa · « **Odpověď #2 kdy:** 14 Června 2007, 19:20:19 »

Děje se to vždy, pokud nezahýbu jezdcem,jak jsem už psal. Přesněji - zapnu PC a třeba hodinu nepoužívám zvuk, potom naklikám na nějaký zvukový soubor, na ploše mám několik MP3, otevře se mě XMMS - ten chci a zvuk nejde musím kliknout na ovládání hlasitosti, kde je př. 90 % a až zahýbu jezdcem ozve se zvuk. Prostě mě to rozčiluje. To samé se děje i třeba s filmem. Děkuji *S*

standa · « **Odpověď #3 kdy:** 14 Června 2007, 19:23:55 »

DOPLNĚNÍ - pokud najedu myší na MP3 tak zvuk taky nejde i když mám nainstalovaný plugin mpg 321 . Prostě zase musím zakvedlat jezdcem.

Jakub Lucký · « **Odpověď #4 kdy:** 14 Června 2007, 19:47:50 »

Takže, budu potřebovat pár informací
1) O jakou zvukovou kartu jde, popř jaký notebook nebo jaká základní deska to je
2) možná i gigantický výpis příkazu dmesg, pro vaše pohodlí ho uložíme do vačeho domovského adresáře

Kód: [Vybrat]

dmesg > ~/dmesg.txt

standa · « **Odpověď #5 kdy:** 14 Června 2007, 20:02:25 »

standa@stary:~$ dmesg
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fee2ec0 end: 000000000ffe2ec0 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000ffe2ec0 size: 0000000000004000 end: 000000000ffe6ec0 type: 3
[ 0.000000] copy_e820_map() start: 000000000ffe6ec0 size: 0000000000008040 end: 000000000ffeef00 type: 4
[ 0.000000] copy_e820_map() start: 000000000ffeef00 size: 0000000000011100 end: 0000000010000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ffe2ec0 (usable)
[ 0.000000] BIOS-e820: 000000000ffe2ec0 - 000000000ffe6ec0 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ffe6ec0 - 000000000ffeef00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000ffeef00 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65506) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65506
[ 0.000000] HighMem 65506 -> 65506
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65506
[ 0.000000] On node 0 totalpages: 65506
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60931 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 IBM ) @ 0x000fdfe0
[ 0.000000] ACPI: RSDT (v001 IBM CDTPWSPM 0x00001010 IBM 0x00000000) @ 0x0ffe6e40
[ 0.000000] ACPI: FADT (v001 IBM CDTPWSPM 0x00001010 IBM 0x00000000) @ 0x0ffe6dc0
[ 0.000000] ACPI: DSDT (v001 IBM CDTPWSPJ 0x00001000 MSFT 0x0100000c) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
[ 0.000000] Detected 548.018 MHz processor.
[ 31.337621] Built 1 zonelists. Total pages: 64995
[ 31.337635] Kernel command line: root=UUID=8fbc0725-4f0c-41ff-bf89-f4f4be559941 ro quiet splash locale=cs_CZ
[ 31.338403] Found and enabled local APIC!
[ 31.338416] mapped APIC to ffffd000 (fee00000)
[ 31.338432] Enabling fast FPU save and restore... done.
[ 31.338442] Enabling unmasked SIMD FPU exception support... done.
[ 31.338476] Initializing CPU#0
[ 31.338653] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 31.340072] Console: colour VGA+ 80x25
[ 31.340667] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 31.341251] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 31.378920] Memory: 248760k/262024k available (1992k kernel code, 12740k reserved, 900k data, 328k init, 0k highmem)
[ 31.378962] virtual kernel memory layout:
[ 31.378966] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 31.378972] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 31.378977] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 31.378983] lowmem : 0xc0000000 - 0xcffe2000 ( 255 MB)
[ 31.378988] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 31.378993] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 31.378998] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 31.379012] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 31.458618] Calibrating delay using timer specific routine.. 1097.49 BogoMIPS (lpj=2194993)
[ 31.458778] Security Framework v1.0.0 initialized
[ 31.458809] SELinux: Disabled at boot.
[ 31.458876] Mount-cache hash table entries: 512
[ 31.459378] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 31.459420] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 31.459430] CPU: L2 cache: 512K
[ 31.459441] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[ 31.459480] Compat vDSO mapped to ffffe000.
[ 31.459508] Remapping vsyscall page to ffffe000
[ 31.459542] Checking 'hlt' instruction... OK.
[ 31.474925] SMP alternatives: switching to UP code
[ 31.475487] Freeing SMP alternatives: 11k freed
[ 31.476125] Early unpacking initramfs... done
[ 32.650438] ACPI: Core revision 20060707
[ 32.652089] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 32.656874] ACPI: setting ELCR to 0200 (from 0e00)
[ 32.718715] CPU0: Intel Pentium III (Katmai) stepping 03
[ 32.718736] SMP motherboard not detected.
[ 32.826355] Brought up 1 CPUs
[ 32.827309] Booting paravirtualized kernel on bare hardware
[ 32.827553] Time: 15:04:12 Date: 05/14/107
[ 32.827677] NET: Registered protocol family 16
[ 32.828060] EISA bus registered
[ 32.828080] ACPI: bus type pci registered
[ 32.829243] PCI: PCI BIOS revision 2.10 entry at 0xfd82c, last bus=1
[ 32.829252] PCI: Using configuration type 1
[ 32.829260] Setting up standard PCI resources
[ 32.842457] ACPI: Interpreter enabled
[ 32.842477] ACPI: Using PIC for interrupt routing
[ 32.843897] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.843914] PCI: Probing PCI hardware (bus 00)
[ 32.844057] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 32.844951] Boot video device is 0000:01:00.0
[ 32.845038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.854687] ACPI: PCI Interrupt Link [PIN1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 32.855714] ACPI: PCI Interrupt Link [PIN2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 32.856707] ACPI: PCI Interrupt Link [PIN3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 32.857725] ACPI: PCI Interrupt Link [PIN4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 32.866854] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.866895] pnp: PnP ACPI init
[ 32.878040] pnp: PnP ACPI: found 14 devices
[ 32.878057] PnPBIOS: Disabled by ACPI PNP
[ 32.878360] PCI: Using ACPI for IRQ routing
[ 32.878374] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.884504] NET: Registered protocol family 8
[ 32.884514] NET: Registered protocol family 20
[ 32.885308] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 32.885322] pnp: 00:0b: ioport range 0xf800-0xf87f could not be reserved
[ 32.885334] pnp: 00:0b: ioport range 0xfe00-0xfe0f has been reserved
[ 32.885344] pnp: 00:0b: ioport range 0x370-0x371 has been reserved
[ 32.885356] pnp: 00:0b: ioport range 0xfd80-0xfd8f has been reserved
[ 32.885366] pnp: 00:0b: ioport range 0xfd90-0xfd9f has been reserved
[ 32.885377] pnp: 00:0b: ioport range 0xfda0-0xfdaf has been reserved
[ 32.886838] PCI: Bridge: 0000:00:01.0
[ 32.886848] IO window: disabled.
[ 32.886860] MEM window: fd000000-febfffff
[ 32.886876] PREFETCH window: fa000000-fcefffff
[ 32.886912] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.887014] NET: Registered protocol family 2
[ 32.926435] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 32.926759] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 32.927067] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 32.927216] TCP: Hash tables configured (established 8192 bind 4096)
[ 32.927227] TCP reno registered
[ 32.938587] checking if image is initramfs... it is
[ 35.162480] Freeing initrd memory: 6789k freed
[ 35.164270] audit: initializing netlink socket (disabled)
[ 35.164328] audit(1181833453.848:1): initialized
[ 35.164878] VFS: Disk quotas dquot_6.5.1
[ 35.164963] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 35.165173] io scheduler noop registered
[ 35.165186] io scheduler anticipatory registered
[ 35.165194] io scheduler deadline registered
[ 35.165238] io scheduler cfq registered (default)
[ 35.165278] Activating ISA DMA hang workarounds.
[ 35.166100] isapnp: Scanning for PnP cards...
[ 35.521056] isapnp: No Plug & Play device found
[ 35.661619] Real Time Clock Driver v1.12ac
[ 35.661815] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 35.662166] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.662672] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 35.664747] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.665553] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 35.666623] mice: PS/2 mouse device common for all mice
[ 35.669592] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 35.670413] input: Macintosh mouse button emulation as /class/input/input0
[ 35.670586] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 35.670603] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 35.671209] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 35.673003] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 35.673021] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 35.673551] EISA: Probing bus 0 at eisa.0
[ 35.673617] Cannot allocate resource for EISA slot 7
[ 35.673631] EISA: Detected 0 cards.
[ 35.703952] TCP cubic registered
[ 35.703988] NET: Registered protocol family 1
[ 35.704235] Testing NMI watchdog ... OK.
[ 35.743991] Using IPI No-Shortcut mode
[ 35.744209] ACPI: (supports S0 S1 S4 S5)
[ 35.744367] Magic number: 11:155:83
[ 35.745214] Time: tsc clocksource has been installed.
[ 35.746029] Freeing unused kernel memory: 328k freed
[ 35.759011] input: AT Translated Set 2 keyboard as /class/input/input1
[ 37.599508] Capability LSM initialized
[ 37.759313] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 39.494756] VP_IDE: IDE controller at PCI slot 0000:00:02.1
[ 39.494803] VP_IDE: chipset revision 6
[ 39.494811] VP_IDE: not 100% native mode: will probe irqs later
[ 39.494840] VP_IDE: VIA vt82c596b (rev 12) IDE UDMA66 controller on pci0000:00:02.1
[ 39.494863] ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
[ 39.494896] ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
[ 39.494919] Probing IDE interface ide0...
[ 39.555079] usbcore: registered new interface driver usbfs
[ 39.555172] usbcore: registered new interface driver hub
[ 39.555276] usbcore: registered new device driver usb
[ 39.562082] USB Universal Host Controller Interface driver v3.0
[ 39.727066] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 39.837700] Floppy drive(s): fd0 is 1.44M
[ 39.868963] FDC 0 is a post-1991 82077
[ 39.996308] hda: FUJITSU MPF3102AT, ATA DISK drive
[ 40.668525] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 41.209420] Probing IDE interface ide1...
[ 41.735674] hdc: LITE-ON LTR-48125S, ATAPI CD/DVD-ROM drive
[ 42.074905] ide1 at 0x170-0x177,0x376 on irq 15
[ 42.128875] PCI: Enabling device 0000:00:02.2 (0000 -> 0001)
[ 42.129778] ACPI: PCI Interrupt Link [PIN4] enabled at IRQ 10
[ 42.129792] PCI: setting IRQ 10 as level-triggered
[ 42.129804] ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [PIN4] -> GSI 10 (level, low) -> IRQ 10
[ 42.129845] uhci_hcd 0000:00:02.2: UHCI Host Controller
[ 42.131141] uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 42.131201] uhci_hcd 0000:00:02.2: irq 10, io base 0x0000fce0
[ 42.134438] SCSI subsystem initialized
[ 42.184622] libata version 2.20 loaded.
[ 42.199680] usb usb1: configuration #1 chosen from 1 choice
[ 42.200417] hub 1-0:1.0: USB hub found
[ 42.200464] hub 1-0:1.0: 2 ports detected
[ 42.305739] 8139cp 0000:00:10.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 42.305758] 8139cp 0000:00:10.0: Try the "8139too" driver instead.
[ 42.321111] 8139too Fast Ethernet driver 0.9.28
[ 42.321259] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [PIN4] -> GSI 10 (level, low) -> IRQ 10
[ 42.321710] eth0: RealTek RTL8139 at 0xd0848f00, 00:50:fc:e1:a4:70, IRQ 10
[ 42.321720] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 42.409735] hda: max request size: 128KiB
[ 42.413539] hda: 19746720 sectors (10110 MB) w/512KiB Cache, CHS=19590/16/63, UDMA(66)
[ 42.413568] hda: cache flushes not supported
[ 42.413714] hda: hda1 hda2 < hda5 >
[ 42.499499] hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 42.499534] Uniform CD-ROM driver Revision: 3.20
[ 42.543400] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 42.778295] usb 1-1: configuration #1 chosen from 1 choice
[ 43.036821] Attempting manual resume
[ 43.036837] swsusp: Resume From Partition 3:5
[ 43.036845] PM: Checking swsusp image.
[ 43.057659] PM: Resume from disk failed.
[ 43.178162] kjournald starting. Commit interval 5 seconds
[ 43.178207] EXT3-fs: mounted filesystem with ordered data mode.
[ 61.679275] eth0: link down
[ 63.401394] NET: Registered protocol family 17
[ 66.652766] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 66.700058] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 68.006073] parport: PnPBIOS parport detected.
[ 68.006160] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 68.157421] input: GenPS/2 Genius Mouse as /class/input/input2
[ 68.517645] Linux agpgart interface v0.102 (c) Dave Jones
[ 68.741234] agpgart: Detected VIA Apollo Pro 133 chipset
[ 68.762333] agpgart: AGP aperture is 256M @ 0xe0000000
[ 69.997884] input: PC Speaker as /class/input/input3
[ 70.055955] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 70.058769] usbcore: registered new interface driver cdc_acm
[ 70.058793] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 71.344086] ACPI: PCI Interrupt Link [PIN2] enabled at IRQ 9
[ 71.344106] PCI: setting IRQ 9 as level-triggered
[ 71.344116] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [PIN2] -> GSI 9 (level, low) -> IRQ 9
[ 72.707011] fuse init (API version 7.8)
[ 72.824419] Adding 465844k swap on /dev/disk/by-uuid/6547cb70-f7f0-48ae-8b6d-18916f5fc13d. Priority:-1 extents:1 across:465844k
[ 73.014621] EXT3 FS on hda1, internal journal
[ 81.826586] No dock devices found.
[ 81.979086] Using specific hotkey driver
[ 82.216146] ibm_acpi: ec object not found
[ 82.429548] input: Power Button (FF) as /class/input/input4
[ 82.430364] ACPI: Power Button (FF) [PWRF]
[ 82.642716] pcc_acpi: loading...
[ 94.658616] lp0: using parport0 (interrupt-driven).
[ 94.730067] ppdev: user-space parallel port driver
[ 99.352629] IBM machine detected. Enabling interrupts during APM calls.
[ 99.352651] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 99.352661] apm: overridden by ACPI.
[ 101.573548] Non-volatile memory driver v1.2
[ 101.726263] input: /usr/sbin/thinkpad-keys as /class/input/input5
[ 102.458213] NET: Registered protocol family 10
[ 102.458627] lo: Disabled Privacy Extensions
[ 102.458822] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 102.648080] Bluetooth: Core ver 2.11
[ 102.648278] NET: Registered protocol family 31
[ 102.648287] Bluetooth: HCI device and connection manager initialized
[ 102.648300] Bluetooth: HCI socket layer initialized
[ 102.767654] Bluetooth: L2CAP ver 2.8
[ 102.767671] Bluetooth: L2CAP socket layer initialized
[ 102.816714] Bluetooth: RFCOMM socket layer initialized
[ 102.816762] Bluetooth: RFCOMM TTY layer initialized
[ 102.816770] Bluetooth: RFCOMM ver 1.8
[ 607.481060] PPP generic driver version 2.4.2
[ 617.160403] PPP BSD Compression module registered
[ 617.367358] PPP Deflate Compression module registered
[ 1469.431105] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 1469.605490] usb 1-2: configuration #1 chosen from 1 choice
[ 1470.364657] usbcore: registered new interface driver libusual
[ 1470.544905] Initializing USB Mass Storage driver...
[ 1470.545258] scsi0 : SCSI emulation for USB Mass Storage devices
[ 1470.545468] usb-storage: device found at 3
[ 1470.545477] usb-storage: waiting for device to settle before scanning
[ 1470.545512] usbcore: registered new interface driver usb-storage
[ 1470.545524] USB Mass Storage support registered.
[ 1475.543028] usb-storage: device scan complete
[ 1475.546040] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 1476.980137] SCSI device sda: 1953792 512-byte hdwr sectors (1000 MB)
[ 1476.983130] sda: Write Protect is off
[ 1476.983145] sda: Mode Sense: 23 00 00 00
[ 1476.983154] sda: assuming drive cache: write through
[ 1476.995120] SCSI device sda: 1953792 512-byte hdwr sectors (1000 MB)
[ 1476.998119] sda: Write Protect is off
[ 1476.998133] sda: Mode Sense: 23 00 00 00
[ 1476.998140] sda: assuming drive cache: write through
[ 1476.998667] sda: sda1
[ 1477.006522] sd 0:0:0:0: Attached scsi removable disk sda
[ 1477.055266] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2515.709929] usb 1-2: USB disconnect, address 3
[10476.076241] init_special_inode: bogus i_mode (37147)
standa@stary:~$

standa · « **Odpověď #6 kdy:** 14 Června 2007, 20:06:54 »

a jakým příkazem prosím zobrazít požadované : 1) O jakou zvukovou kartu jde, popř jaký notebook nebo jaká základní deska to je

Jakub Lucký · « **Odpověď #7 kdy:** 14 Června 2007, 20:14:08 »

No, pokud je to notebook, tak typ víte a pokud máte desktop, pak zkusíme ještě opět další výpis:

Kód: [Vybrat]

sudo lshw > ~/lshw.txtPříkaz opět vytvoří soubor

standa · « **Odpověď #8 kdy:** 14 Června 2007, 20:21:48 »

stary
description: Desktop Computer
product: 6565ABG
vendor: IBM
serial: 55482HY
width: 32 bits
capabilities: smbios-2.3 dmi-2.2
configuration: chassis=desktop uuid=2A52A243-A7D6-2212-84CA-17BA67B8DE70
*-core
description: Motherboard
product: 6565ABG
vendor: IBM
physical id: 0
serial: K4Q8A27HZYX
slot: Audio Line In
*-firmware
description: BIOS
vendor: IBM
physical id: 0
version: PMKT18AUS (05/15/2000)
size: 64KB
capacity: 448KB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: Pentium III (Katmai)
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.7.3
slot: CPU
size: 550MHz
capacity: 866MHz
width: 32 bits
clock: 100MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse up
*-cache:0
description: L1 cache
physical id: 5
slot: Internal L1 Cache
size: 32KB
capacity: 512KB
capabilities: asynchronous internal write-back
*-cache:1
description: L2 cache
physical id: 6
slot: Internal L2 Cache
size: 512KB
capacity: 512KB
capabilities: asynchronous internal write-back unified
*-memory
description: System Memory
physical id: 1c
slot: System board or motherboard
size: 256MB
capacity: 512MB
*-bank:0
description: DIMM SDRAM Synchronous
physical id: 0
slot: DIMM 0
size: 128MB
width: 64 bits
*-bank:1
description: DIMM SDRAM Synchronous
physical id: 1
slot: DIMM 1
size: 128MB
width: 64 bits
*-pci:0
description: Host bridge
product: VT82C693A/694x [Apollo PRO133x]
vendor: VIA Technologies, Inc.
physical id: e0000000
bus info: pci@00:00.0
version: c4
width: 32 bits
clock: 33MHz
configuration: latency=8
resources: iomemory:e0000000-efffffff
*-pci
description: PCI bridge
product: VT82C598/694x [Apollo MVP3/Pro133x AGP]
vendor: VIA Technologies, Inc.
physical id: 1
bus info: pci@00:01.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master cap_list
*-display
description: VGA compatible controller
product: NV5 [RIVA TNT2/TNT2 Pro]
vendor: nVidia Corporation
physical id: 0
bus info: pci@01:00.0
version: 15
size: 32MB
width: 32 bits
clock: 66MHz
capabilities: vga bus_master cap_list
configuration: latency=40 maxlatency=1 mingnt=5
resources: iomemory:fd000000-fdffffff iomemory:fa000000-fbffffff irq:11
*-isa
description: ISA bridge
product: VT82C596 ISA [Mobile South]
vendor: VIA Technologies, Inc.
physical id: 2
bus info: pci@00:02.0
version: 12
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide
description: IDE interface
product: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
vendor: VIA Technologies, Inc.
physical id: 2.1
bus info: pci@00:02.1
version: 06
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=VIA_IDE latency=32
resources: iomemory:1f0-1f7 iomemory:3f0-3ef iomemory:170-177 iomemory:370-36f ioport:fff0-ffff
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk
description: ATA Disk
product: FUJITSU MPF3102AT
vendor: Fujitsu
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
version: 1111
serial: 01106417
size: 9641MB
capacity: 9641MB
capabilities: ata dma lba iordy smart security pm apm partitioned partitioned:dos
configuration: apm=off mode=udma4 smart=on
*-volume:0
description: Linux filesystem partition
physical id: 1
bus info: ide@0.0,1
logical name: /dev/hda1
capacity: 9185MB
capabilities: primary bootable
*-volume:1
description: Extended partition
physical id: 2
bus info: ide@0.0,2
logical name: /dev/hda2
size: 454MB
capacity: 454MB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/hda5
capacity: 454MB
capabilities: nofs
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-cdrom
description: CD-R/CD-RW writer
product: LITE-ON LTR-48125S
physical id: 0
bus info: ide@1.0
logical name: /dev/hdc
version: 1S07
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio cd-r cd-rw
configuration: mode=udma2
*-disc
physical id: 0
logical name: /dev/hdc
*-usb
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 2.2
bus info: pci@00:02.2
version: 08
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=22
resources: ioport:fce0-fcff irq:10
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.20-16-generic uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb
description: Communication device
product: Qualcomm CDMA Technologies MSM
vendor: Qualcomm, Incorporated
physical id: 1
bus info: usb@1:1
version: 0.00
capabilities: usb-1.01
configuration: driver=cdc_acm maxpower=100mA speed=12.0MB/s
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 10
bus info: pci@00:10.0
logical name: eth0
version: 10
serial: 00:50:fc:e1:a4:70
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=208 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10MB/s
resources: ioport:7400-74ff iomemory:fcffff00-fcffffff irq:10
*-multimedia
description: Multimedia audio controller
product: ES1988 Allegro-1
vendor: ESS Technology
physical id: 12
bus info: pci@00:12.0
version: 10
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=Maestro3 latency=16 maxlatency=24 mingnt=2
resources: ioport:7800-78ff irq:9
*-pci:1
description: Host bridge
product: VT82C596 Power Management
vendor: VIA Technologies, Inc.
physical id: 100
bus info: pci@00:02.3
version: 20
width: 32 bits
clock: 33MHz

Jakub Lucký · « **Odpověď #9 kdy:** 14 Června 2007, 20:27:40 »

Pro nově příchozí shrnu:
Z lshw

Kód: [Vybrat]

*-multimedia
             description: Multimedia audio controller
             product: ES1988 Allegro-1
             vendor: ESS Technology
             physical id: 12
             bus info: pci@00:12.0
             version: 10
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=Maestro3 latency=16 maxlatency=24 mingnt=2
             resources: ioport:7800-78ff irq:9

A v dmesg nic dost zajímavého

standa · « **Odpověď #10 kdy:** 14 Června 2007, 20:32:53 »

jinak na LINUXU začínám - k tomuto PC :
1 - je dostačující ?
2 - je vidět, že grafika je *-display
description: VGA compatible controller
product: NV5 [RIVA TNT2/TNT2 Pro]
vendor: nVidia Corporation
physical id: 0
bus info: pci@01:00.0
version: 15
size: 32MB
width: 32 bits
clock: 66MHz
capabilities: vga bus_master cap_list
configuration: latency=40 maxlatency=1 mingnt=5
resources: iomemory:fd000000-fdffffff iomemory:fa000000-fbffffff irq:11

BOHUŽEL SE MĚ JEŠTĚ NEPODAŘILO ROZCHODIT 3D - UŽ JSEM TO VZDAL, VYZKOUŠEL JSEM KDEJAKÝ NÁVOD. PÍSMO JE NEZAOSTŘENÉ - HRY NEHRAJU.

Jakub Lucký · « **Odpověď #11 kdy:** 14 Června 2007, 20:35:09 »

Po krátkém googlení jsem našel možné řešení...
Až to nepůjde, zkuste tyto dva příkazy:

Kód: [Vybrat]

sudo rmmod maestro3
sudo modprobe snd-maestro3

Jakub Lucký · « **Odpověď #12 kdy:** 14 Června 2007, 20:39:59 »

Na grafiku bych zkusil toto:

http://wiki.ubuntu.cz/Grafick%C3%A9_karty_NVIDIA
Jen instalujte místo nvidia-glx balík nvidia-glx-legacy

standa · « **Odpověď #13 kdy:** 14 Června 2007, 20:45:45 »

po restartu zvuk nešel dal jsem první příkaz a :

standa@stary:~$ sudo rmmod maestro3
Password:
ERROR: Module maestro3 does not exist in /proc/modules
standa@stary:~$

k linku na grafiku - děkuji zkoušel jsem, nerozchodil, musel jsem odinstalovat. Jedu vlastně na ovladač, který je nainstalován jako zálkadní ( teda jestli píšu srozumitelně)

Jakub Lucký · « **Odpověď #14 kdy:** 14 Června 2007, 20:51:23 »

Ten první příkaz je asi špatně... zkuste ten druhý (ten je 100% dobře)

Ad grafika: to by se poddalo (jen to chce trochu bojovat)
Na kostrbaté písmo by snad mělo stačit nastavit jinak Systém -> Volby -> Písmo

standa · « **Odpověď #15 kdy:** 14 Června 2007, 20:56:44 »

Ano druhý správně zvuk OK - děkuji, ještě k té sestavě - je dostačující ? Používam PC jen jako komunikační na net, ale ta grafika - musím si teda pohrát. Nějaké TIPY jestě jsou v záloze ? Pomohlo by mě, kdyby mě třeba někdo poslal xorg.conf rozchozené NV5 [RIVA TNT2/TNT2 Pro] a já to jen přeplácnul

Maya · « **Odpověď #16 kdy:** 26 Června 2007, 13:27:20 »

Zdravím, když zapnu Ubuntu, tak ni nejde zvuk...nepomáhá ani "kvrdlání s jezdcem u xmms nebo cokoli jiného. mám ještě windows XP, které padají. Když dělám něco ve win. a ty spadnou přestane fungovat zvuk po nastartovaní ubuntu. Dřív pomohl návrat do win. a správné ukončení systému a poté zase zpet do ubuntu, kde bylo vse ok. nyní už ani toto nepomáhá. Moc prosím o nějaký návod, jak na to. Děkuju. (snad to bylo alespoň trochu srozumitelné)

Jakub Lucký · « **Odpověď #17 kdy:** 26 Června 2007, 22:41:46 »

Zvuk nefunguje vůbec?
Pak určitě pošlete kompletní výpis příkazu dmesg

Pohodlně:
dmesg > ~/dmesg.txt
Pak si z domovského adresáře otevřete soubor dmesg.txt ve kterém vše bude

menaCe · « **Odpověď #18 kdy:** 31 Července 2007, 16:15:02 »

Mám stejný problém na notebooku Compaq Evo N400c (zvukova karta ESS Allegro) se zvukem mám problém od přechodu na xUbuntu feisty fawn....

výpis dmesg

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fed0000 end: 000000001ffd0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001ffd0000 size: 0000000000020c00 end: 000000001fff0c00 type: 2
[ 0.000000] copy_e820_map() start: 000000001fff0c00 size: 000000000000b400 end: 000000001fffc000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fffc000 size: 0000000000004000 end: 0000000020000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
[ 0.000000] BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131024) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131024
[ 0.000000] HighMem 131024 -> 131024
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131024
[ 0.000000] On node 0 totalpages: 131024
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125937 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 COMPAQ ) @ 0x000f7330
[ 0.000000] ACPI: RSDT (v001 COMPAQ CPQ0022 0x27060320 CPQ 0x00000001) @ 0x1fff0c84
[ 0.000000] ACPI: FADT (v002 COMPAQ CPQ0022 0x00000002 CPQ 0x00000001) @ 0x1fff0c00
[ 0.000000] ACPI: DSDT (v001 COMPAQ EVON400C 0x00010000 MSFT 0x0100000d) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
[ 0.000000] Detected 846.906 MHz processor.
[ 1561.345547] Built 1 zonelists. Total pages: 130001
[ 1561.345556] Kernel command line: root=UUID=621afce3-941b-4198-a034-4344a8c9b978 ro quiet splash
[ 1561.346034] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 1561.346056] mapped APIC to ffffd000 (0140a000)
[ 1561.346066] Enabling fast FPU save and restore... done.
[ 1561.346073] Enabling unmasked SIMD FPU exception support... done.
[ 1561.346098] Initializing CPU#0
[ 1561.346209] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 1561.347762] Console: colour VGA+ 80x25
[ 1561.349022] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 1561.350458] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1561.401853] Memory: 508600k/524096k available (1992k kernel code, 14972k reserved, 900k data, 328k init, 0k highmem)
[ 1561.401881] virtual kernel memory layout:
[ 1561.401884] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 1561.401888] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 1561.401892] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 1561.401895] lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB)
[ 1561.401899] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 1561.401902] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 1561.401906] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 1561.401915] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 1561.478200] Calibrating delay using timer specific routine.. 1695.11 BogoMIPS (lpj=3390221)
[ 1561.478303] Security Framework v1.0.0 initialized
[ 1561.478322] SELinux: Disabled at boot.
[ 1561.478364] Mount-cache hash table entries: 512
[ 1561.478680] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 1561.478706] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 1561.478713] CPU: L2 cache: 256K
[ 1561.478720] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 1561.478745] Compat vDSO mapped to ffffe000.
[ 1561.478763] Remapping vsyscall page to ffffe000
[ 1561.478785] Checking 'hlt' instruction... OK.
[ 1561.494405] SMP alternatives: switching to UP code
[ 1561.494764] Freeing SMP alternatives: 11k freed
[ 1561.495199] Early unpacking initramfs... done
[ 1562.246958] ACPI: Core revision 20060707
[ 1562.248154] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 1562.254166] ACPI: setting ELCR to 0200 (from 0800)
[ 1562.272714] CPU0: Intel Pentium III (Coppermine) stepping 0a
[ 1562.272728] SMP motherboard not detected.
[ 1562.272734] Local APIC not detected. Using dummy APIC emulation.
[ 1562.272832] Brought up 1 CPUs
[ 1562.273441] Booting paravirtualized kernel on bare hardware
[ 1562.273584] Time: 15:43:19 Date: 06/31/107
[ 1562.273671] NET: Registered protocol family 16
[ 1562.273912] EISA bus registered
[ 1562.273924] ACPI: bus type pci registered
[ 1562.275595] PCI: PCI BIOS revision 2.10 entry at 0xf0491, last bus=1
[ 1562.275601] PCI: Using configuration type 1
[ 1562.275607] Setting up standard PCI resources
[ 1562.301796] ACPI: Interpreter enabled
[ 1562.301809] ACPI: Using PIC for interrupt routing
[ 1562.302631] ACPI: PCI Root Bridge [C03A] (0000:00)
[ 1562.302644] PCI: Probing PCI hardware (bus 00)
[ 1562.302691] ACPI: Assume root bridge [\_SB_.C03A] bus is 0
[ 1562.311939] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[ 1562.311950] PCI quirk: region 1100-110f claimed by PIIX4 SMB
[ 1562.311961] PIIX4 devres C PIO at 0100-0107
[ 1562.311967] PIIX4 devres I PIO at 00e0-00e3
[ 1562.311974] PIIX4 devres J PIO at 00f8-00fb
[ 1562.312062] PCI: Firmware left 0000:00:09.0 e100 interrupts enabled, disabling
[ 1562.312298] Boot video device is 0000:01:00.0
[ 1562.312437] ACPI: PCI Interrupt Routing Table [\_SB_.C03A._PRT]
[ 1562.336174] ACPI: PCI Interrupt Routing Table [\_SB_.C03A.C03B._PRT]
[ 1562.339997] ACPI: Power Resource [C11E] (on)
[ 1562.344321] ACPI: Power Resource [C132] (on)
[ 1562.347568] ACPI: Power Resource [C137] (on)
[ 1562.350836] ACPI: Power Resource [C13A] (on)
[ 1562.351628] ACPI: Power Resource [C146] (on)
[ 1562.353541] ACPI: PCI Interrupt Link [C090] (IRQs 5 10 *11)
[ 1562.354572] ACPI: PCI Interrupt Link [C091] (IRQs 11) *0, disabled.
[ 1562.355571] ACPI: PCI Interrupt Link [C092] (IRQs 5 10 *11)
[ 1562.356569] ACPI: PCI Interrupt Link [C093] (IRQs 5 10 *11)
[ 1562.362796] ACPI: Power Resource [C1C6] (off)
[ 1562.363105] ACPI: Power Resource [C1C7] (off)
[ 1562.363408] ACPI: Power Resource [C1C8] (off)
[ 1562.363847] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1562.363876] pnp: PnP ACPI init
[ 1562.400464] pnp: PnP ACPI: found 14 devices
[ 1562.400477] PnPBIOS: Disabled by ACPI PNP
[ 1562.400626] PCI: Using ACPI for IRQ routing
[ 1562.400634] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 1562.431379] NET: Registered protocol family 8
[ 1562.431385] NET: Registered protocol family 20
[ 1562.432479] pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 1562.432489] pnp: 00:0d: ioport range 0x530-0x537 has been reserved
[ 1562.432496] pnp: 00:0d: ioport range 0x800-0x87f has been reserved
[ 1562.432504] pnp: 00:0d: ioport range 0x1000-0x103f could not be reserved
[ 1562.432512] pnp: 00:0d: ioport range 0x1100-0x110f has been reserved
[ 1562.433210] PCI: Bridge: 0000:00:01.0
[ 1562.433218] IO window: 2000-2fff
[ 1562.433227] MEM window: 40000000-410fffff
[ 1562.433234] PREFETCH window: 38000000-380fffff
[ 1562.433243] PCI: Bus 2, cardbus bridge: 0000:00:04.0
[ 1562.433249] IO window: 00001400-000014ff
[ 1562.433256] IO window: 00001800-000018ff
[ 1562.433264] PREFETCH window: 30000000-33ffffff
[ 1562.433272] MEM window: 34000000-37ffffff
[ 1562.434109] ACPI: PCI Interrupt Link [C090] enabled at IRQ 11
[ 1562.434144] PCI: setting IRQ 11 as level-triggered
[ 1562.434151] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [C090] -> GSI 11 (level, low) -> IRQ 11
[ 1562.434224] NET: Registered protocol family 2
[ 1562.470309] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1562.470526] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1562.470914] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1562.471158] TCP: Hash tables configured (established 16384 bind 8192)
[ 1562.471166] TCP reno registered
[ 1562.482476] checking if image is initramfs... it is
[ 1563.906249] Freeing initrd memory: 6772k freed
[ 1563.908856] audit: initializing netlink socket (disabled)
[ 1563.908889] audit(1185896600.732:1): initialized

anicka · « **Odpověď #19 kdy:** 13 Prosince 2007, 20:47:16 »

pokračování menaCe výpisu:

[ 1563.909202] VFS: Disk quotas dquot_6.5.1
[ 1563.909255] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1563.909394] io scheduler noop registered
[ 1563.909402] io scheduler anticipatory registered
[ 1563.909408] io scheduler deadline registered
[ 1563.909434] io scheduler cfq registered (default)
[ 1563.909454] Limiting direct PCI/PCI transfers.
[ 1563.909958] isapnp: Scanning for PnP cards...
[ 1564.262978] isapnp: No Plug & Play device found
[ 1564.337833] Real Time Clock Driver v1.12ac
[ 1564.338077] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1564.338259] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1564.338879] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 1564.339787] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1564.341385] ACPI: PCI Interrupt Link [C092] enabled at IRQ 11
[ 1564.341396] ACPI: PCI Interrupt 0000:00:09.1[A] -> Link [C092] -> GSI 11 (level, low) -> IRQ 11
[ 1564.342189] mice: PS/2 mouse device common for all mice
[ 1564.343536] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1564.344135] input: Macintosh mouse button emulation as /class/input/input0
[ 1564.344221] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1564.344231] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1564.344626] PNP: PS/2 Controller [PNP0303:C143,PNP0f0e:C144] at 0x60,0x64 irq 1,12
[ 1564.347216] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 1564.348243] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1564.348256] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1564.348263] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1564.348270] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1564.348277] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1564.348592] EISA: Probing bus 0 at eisa.0
[ 1564.348616] Cannot allocate resource for EISA slot 1
[ 1564.348622] Cannot allocate resource for EISA slot 2
[ 1564.348628] Cannot allocate resource for EISA slot 3
[ 1564.348652] EISA: Detected 0 cards.
[ 1564.378853] TCP cubic registered
[ 1564.378873] NET: Registered protocol family 1
[ 1564.378929] Using IPI No-Shortcut mode
[ 1564.379089] ACPI: (supports S0 S1 S3 S4 S5)
[ 1564.379188] Magic number: 15:610:741
[ 1564.380488] Freeing unused kernel memory: 328k freed
[ 1564.381968] Time: tsc clocksource has been installed.
[ 1564.392278] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1565.969982] Capability LSM initialized
[ 1566.059003] ACPI: Transitioning device [C1C9] to D3
[ 1566.059012] ACPI: Transitioning device [C1C9] to D3
[ 1566.059021] ACPI: Fan [C1C9] (off)
[ 1566.059433] ACPI: Transitioning device [C1CA] to D3
[ 1566.059439] ACPI: Transitioning device [C1CA] to D3
[ 1566.059446] ACPI: Fan [C1CA] (off)
[ 1566.059858] ACPI: Transitioning device [C1CB] to D3
[ 1566.059864] ACPI: Transitioning device [C1CB] to D3
[ 1566.059872] ACPI: Fan [C1CB] (off)
[ 1566.071732] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1566.071748] ACPI: Processor [C000] (supports 8 throttling states)
[ 1566.093453] ACPI: Thermal Zone [TZ1] (66 C)
[ 1567.386764] SCSI subsystem initialized
[ 1567.408815] libata version 2.20 loaded.
[ 1567.422949] PIIX4: IDE controller at PCI slot 0000:00:07.1
[ 1567.422981] PIIX4: chipset revision 1
[ 1567.422987] PIIX4: not 100% native mode: will probe irqs later
[ 1567.423003] ide0: BM-DMA at 0x3460-0x3467, BIOS settings: hda:DMA, hdb:pio
[ 1567.423024] ide1: BM-DMA at 0x3468-0x346f, BIOS settings: hdc:pio, hdd:pio
[ 1567.423039] Probing IDE interface ide0...
[ 1567.461012] usbcore: registered new interface driver usbfs
[ 1567.461077] usbcore: registered new interface driver hub
[ 1567.461136] usbcore: registered new device driver usb
[ 1567.464812] USB Universal Host Controller Interface driver v3.0
[ 1567.509244] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 1567.509255] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1567.760347] Floppy drive(s): fd0 is 1.44M
[ 1567.765850] hda: Hitachi HTS541280H9AT00, ATA DISK drive
[ 1567.836119] FDC 0 is a post-1991 82077
[ 6.704000] Time: acpi_pm clocksource has been installed.
[ 7.080000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 7.096000] Probing IDE interface ide1...
[ 7.664000] ACPI: PCI Interrupt Link [C093] enabled at IRQ 11
[ 7.664000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [C093] -> GSI 11 (level, low) -> IRQ 11
[ 7.664000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 7.664000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 7.664000] uhci_hcd 0000:00:07.2: irq 11, io base 0x00003440
[ 7.668000] usb usb1: configuration #1 chosen from 1 choice
[ 7.668000] hub 1-0:1.0: USB hub found
[ 7.668000] hub 1-0:1.0: 2 ports detected
[ 7.684000] hda: max request size: 512KiB
[ 7.688000] hda: 156301488 sectors (80026 MB) w/7528KiB Cache, CHS=16383/255/63, UDMA(33)
[ 7.688000] hda: cache flushes supported
[ 7.688000] hda: hda1 hda2 < hda5 hda6 > hda4
[ 7.772000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [C092] -> GSI 11 (level, low) -> IRQ 11
[ 7.864000] e100: eth0: e100_probe: addr 0x41200000, irq 11, MAC addr 00:D0:59:C5:BA:22
[ 8.068000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 8.240000] usb 1-2: configuration #1 chosen from 1 choice
[ 8.240000] hub 1-2:1.0: USB hub found
[ 8.244000] hub 1-2:1.0: 4 ports detected
[ 8.408000] Attempting manual resume
[ 8.408000] swsusp: Resume From Partition 3:4
[ 8.408000] PM: Checking swsusp image.
[ 8.420000] PM: Resume from disk failed.
[ 8.508000] kjournald starting. Commit interval 5 seconds
[ 8.508000] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.568000] usb 1-2.1: new full speed USB device using uhci_hcd and address 3
[ 8.696000] usb 1-2.1: configuration #1 chosen from 1 choice
[ 8.904000] usb 1-2.3: new low speed USB device using uhci_hcd and address 4
[ 9.044000] usb 1-2.3: configuration #1 chosen from 1 choice
[ 9.260000] usb 1-2.2: new full speed USB device using uhci_hcd and address 5
[ 9.388000] usb 1-2.2: configuration #1 chosen from 1 choice
[ 22.864000] NET: Registered protocol family 17
[ 24.304000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.340000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.384000] Yenta: CardBus bridge found at 0000:00:04.0 [0e11:b103]
[ 24.384000] Yenta: Enabling burst memory read transactions
[ 24.384000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 24.384000] Yenta: Routing CardBus interrupts to PCI
[ 24.384000] Yenta TI: socket 0000:00:04.0, mfunc 0x01001002, devctl 0x64
[ 24.616000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 24.616000] Socket status: 30000006
[ 24.956000] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.968000] agpgart: Detected an Intel 440BX Chipset.
[ 24.972000] agpgart: AGP aperture is 64M @ 0x50000000
[ 25.480000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 26.320000] Synaptics Touchpad, model: 1, fw: 5.6, id: 0x165eb1, caps: 0x804713/0x0
[ 26.372000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 26.484000] input: PC Speaker as /class/input/input3
[ 26.520000] parport: PnPBIOS parport detected.
[ 26.520000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 27.128000] irda_init()
[ 27.128000] NET: Registered protocol family 23
[ 27.192000] usbcore: registered new interface driver hiddev
[ 27.240000] found SMC SuperIO Chip (devid=0x0a rev=00 base=0x00e0): FDC37N971
[ 27.240000] smsc_ircc_present: can't get sir_base of 0x3e8
[ 27.368000] input: Logitech USB Receiver as /class/input/input4
[ 27.368000] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:07.2-2.3
[ 27.400000] input: Logitech USB Receiver as /class/input/input5
[ 27.400000] input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:07.2-2.3
[ 27.400000] usbcore: registered new interface driver usbhid
[ 27.400000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 27.472000] usbcore: registered new interface driver xpad
[ 27.472000] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 27.472000] usbcore: registered new interface driver libusual
[ 27.508000] Initializing USB Mass Storage driver...
[ 27.508000] scsi0 : SCSI emulation for USB Mass Storage devices
[ 27.508000] usbcore: registered new interface driver usb-storage
[ 27.508000] USB Mass Storage support registered.
[ 27.508000] usb-storage: device found at 5
[ 27.508000] usb-storage: waiting for device to settle before scanning
[ 27.580000] cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
[ 27.584000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 27.584000] cs: IO port probe 0x820-0x8ff: clean.
[ 27.584000] cs: IO port probe 0xc00-0xcf7: clean.
[ 27.584000] cs: IO port probe 0xa00-0xaff: clean.
[ 28.032000] PCI: Enabling device 0000:00:08.0 (0000 -> 0001)
[ 28.032000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [C092] -> GSI 11 (level, low) -> IRQ 11
[ 29.256000] fuse init (API version 7.8)
[ 29.300000] lp0: using parport0 (interrupt-driven).
[ 29.372000] Adding 522104k swap on /dev/disk/by-uuid/749638cb-cf81-4c73-b320-eed1d5762be7. Priority:-1 extents:1 across:522104k
[ 29.600000] EXT3 FS on hda6, internal journal
[ 29.940000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 30.044000] NTFS volume version 3.1.
[ 30.104000] NTFS volume version 3.1.
[ 32.508000] usb-storage: device scan complete
[ 32.512000] scsi 0:0:0:0: Direct-Access CREATIVE Zen Nano Plus 1143 PQ: 0 ANSI: 4
[ 32.564000] SCSI device sda: 473600 2048-byte hdwr sectors (970 MB)
[ 32.568000] sda: Write Protect is off
[ 32.568000] sda: Mode Sense: 38 00 00 00
[ 32.568000] sda: assuming drive cache: write through
[ 32.576000] SCSI device sda: 473600 2048-byte hdwr sectors (970 MB)
[ 32.580000] sda: Write Protect is off
[ 32.580000] sda: Mode Sense: 38 00 00 00
[ 32.580000] sda: assuming drive cache: write through
[ 32.580000] sda: sda1
[ 32.588000] sd 0:0:0:0: Attached scsi removable disk sda
[ 32.608000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 38.704000] ACPI: Battery Slot [C174] (battery present)
[ 38.704000] ACPI: Battery Slot [C175] (battery absent)
[ 38.704000] ACPI: Battery Slot [C176] (battery absent)
[ 38.704000] ACPI: Battery Slot [C177] (battery absent)
[ 38.728000] Using specific hotkey driver
[ 38.920000] ACPI: ACPI Dock Station Driver
[ 39.036000] input: Power Button (FF) as /class/input/input6
[ 39.036000] ACPI: Power Button (FF) [PWRF]
[ 39.064000] input: Sleep Button (CM) as /class/input/input7
[ 39.064000] ACPI: Sleep Button (CM) [C17A]
[ 39.080000] input: Lid Switch as /class/input/input8
[ 39.080000] ACPI: Lid Switch [C17B]
[ 39.320000] ACPI: AC Adapter [C179] (on-line)
[ 39.348000] ibm_acpi: ec object not found
[ 39.532000] pcc_acpi: loading...
[ 46.168000] ppdev: user-space parallel port driver
[ 47.776000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 47.776000] apm: overridden by ACPI.
[ 48.052000] ondemand governor failed to load due to too long transition latency
[ 87.052000] NET: Registered protocol family 10
[ 87.052000] lo: Disabled Privacy Extensions
[ 87.052000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 93.580000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 93.580000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 104.420000] eth0: no IPv6 routers present
[ 167.504000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 167.508000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 168.064000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 178.452000] eth0: no IPv6 routers present

prosím o pomoc či radu :)

Autor Téma: Nefunkční zvuk bez manuálního nastavení hlasitosti (Přečteno 7673 krát)

anicka