změna rozlišení

[tatra]

Ahoj,
potreboval bych zvysit rozliseni, i kdyz to nepodporuje graficka karta. v XP se to da "preladit". v Ubuntu 7.04 jsem tuto moznost nejak nenasel.

dik za rady.

[Jakub Lucký]

přeladit? grafická karta by šla maximálně přetaktovat, ale nevím jestli se tím zvedne nejvyšší možné rozlišení

[TIBOR]

Dost by pomohlo keby si napisal co to je to "preladenie" a hlavne aku graficku kartu mas a s akymi ovladacmi. Vseobecne plati ze musis nastavit  v /etc/X11/xorg conf spravne parametre pre tvoj monitor v sekcii monitor a ak tam niesu tak aj pozadovane rozlisenia v sekcii screen. Ak sa jedna o nastavenie beznych rozliseni ktore zvlada tvoja gr. karta tak cez vyhladavanie tu najdes mnozstvo navodou ako na to.

P.s samozrejme ak s tym nebudes vediet pohnut radi pomozeme.

[tatra]

NVidia GeForce 4 MX 440 (neni prelazene, windows to dokaze zmensit programove)

[tatra]

Ovaladač zakladni z instalace ubuntu

[tatra]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   Fontpath   "/usr/share/fonts/X11/misc"
   Fontpath   "/usr/share/fonts/X11/cyrillic"
   Fontpath   "/usr/share/fonts/X11/100dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/75dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/Type1"
   Fontpath   "/usr/share/fonts/X11/100dpi"
   Fontpath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   Fontpath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load      "i2c"
   Load      "bitmap"
   Load      "ddc"
   Load      "extmod"
   Load      "freetype"
   Load      "glx"
   Load      "int10"
   Load      "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "cz"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"   "/dev/input/mice"
   Option      "Protocol"   "ImPS/2"
   Option      "ZAxisMapping"   "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "stylus"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "eraser"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "cursor"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x]"
   Driver      "nvidia"
   Busid      "PCI:1:0:0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
EndSection

Section "Monitor"
   Identifier   "KM-777"
   Option      "DPMS"
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x]"
   Monitor      "KM-777"
   Defaultdepth   24
   SubSection "Display"
      Depth   1
      Modes      "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   4
      Modes      "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   8
      Modes      "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   15
      Modes      "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   16
      Modes      "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   24
      Modes      "1024x768"   "800x600"   "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
  screen "Default Screen"
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
   Inputdevice   "stylus"   "SendCoreEvents"
   Inputdevice   "cursor"   "SendCoreEvents"
   Inputdevice   "eraser"   "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection

[tatra]

potreboval bych 1280x960

[TIBOR]

V prvom rade skus ci ti ide 3d akceleracia
glxinfo | grep direct
ma vypisat
direct rendering: Yes
ak to mas ovladac funguje spravne.
Dalej uprav xorg.conf v sekcii monitor

Section "Monitor"
Identifier "KM-777"
Option "DPMS"
HorizSync 30-60
VertRefresh 50-75
EndSection

a potom sekcion screen

SubSection "Display"
        Depth    24
        Modes       "1280x960"  "1024x768"    "800x600"    "640x480"
    EndSubSection

a restartuj Ctrl+Alt+Backspace.

[kotli]

Funguje to dokonale, díky moc.

PS: Nedivte se že píše někdo jinej, psal jsem od tatry.

[is1dor]

Zkousel jsem to podle tohoto navodu a pri editovani xorg.conf to pise ze nemam opravneni, pri ulozeni. potrebuji rozliseni 1440x900 tak to mam udelat stejne jak tady je psano? akorat zmenit to moje rozliseni (1440x900)

[Ilja Iljič]

Záleží na tom, zda požadované rozlišení zvládne váš monitor. Jinak xorg.conf nemůžete měnit s prostými uživatelskými právy. Takže poté, co si jej zazálohujete (!), zadejte do terminálu kupříkladu

Kód: [Vybrat]

sudo gedit /etc/X11/xorg.confMísto geditu můžete samozřejmě použít svůj oblíbený editor.

[inetMark]

Skusal som zmenit horizsync a vertrefresh na hodnotu tu uvedene, ale nepomohlo. Moj subor vyzera takto:

Kód: [Vybrat]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "fglrx"
Busid "PCI:1:5:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
Horizsync 30-60
Vertrefresh 50-75
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSectionPred tym som mal na horizsync a vertrefsreh ine hodnoty, ale samotne rozlisenia som si uz pridal podla ineho navodu este pred tym. Zalozil som aj thread, kde som popisal aj overenie ci mam nainstalovanu graficku (mam ATI x1250 integrovanu na doske).
Thread je tu http://forum.ubuntu.cz/viewtopic.php?id=14214

EDIT: Uz som skusil aj vsetky ostatne rozlisenia zmazat a nehat tam len 1680*1050, ale potom som videl len cast obrazovky a nevidel som spodne menu a len tak tak som dokazal spustit terminal, kedze BAR kde sa terminal nachadza mam umiestneny dole.

[kotli]

Zdravim, zakládal jsem toto téma, no a jaksi jsem se znova dostal do stejný situace a vůbec si nepamatuju jak postupovat i když jsem si přečetl co je psáno nahoře. Jako první jsem zkusil tu 3D akceleraci, ale napsalo mi to No. Co mám dělat? Díky.

[peanut]

Yeeeey ja to chcem tiez, takze aky je postup pre mna? GK: integrovana Intel GMA 945 Express myslim a direct rendering: yes ^^ Btw to preto som sa stale cudoval ake maju ludia rozlisenie, a pritom take nie je mozne nastavit, chytraci jedny
PS: Mozem si vybrat ake chcem alebo len nejake, prip. ake je najvyssie mozne?

EDIT: A ako sa to robi vo Win-e? Konkretne Vista. Ak niekto vie, sem s tym.
EDIT: Vyriesene