Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Ako zvacsit rozlisenie?[vyřešeno]  (Přečteno 1946 krát)

inetMark

  • Návštěvník
  • Příspěvků: 6
Ako zvacsit rozlisenie?[vyřešeno]
« kdy: 21 Září 2007, 01:27:44 »
Mam nainstalovany Ubuntu 7.04.
Graficku kartu som si nainstaloval podla tohto navodu:
http://wiki.ubuntu.cz/Ovlada%C4%8De_grafick%C3%BDch_karet
Povolil som restricted drivers a oznacil ati, dal OK, resetlo sa.
Nasledne som otestoval ci sa ovladace nainstalovali podla tohto navodu:
http://wiki.ubuntu.cz/Ovlada%C4%8De_grafick%C3%BDch_karet#test3d
Kód: [Vybrat]
glxinfo | grep direct+otestovanie jednej hry (a nesekala).

Kartu mam integrovanu na doske ATI x1250.

Problem je ze ak dam System -> Resolution a chcem zmenit rozlisenie, tak nejde nastavit na moje rozlisenie a mam tam len tie dalsie 3 rozlisenia. Potrebujem rozlisenie 1680x1050.

Dakujem.
« Poslední změna: 10 Října 2007, 21:25:16 od Marcel "Maky" Šuška »

inetMark

  • Návštěvník
  • Příspěvků: 6
Ako zvacsit rozlisenie?
« Odpověď #1 kdy: 21 Září 2007, 11:58:46 »
Este pridavam obsah subora (/etc/X11/xorg.conf), kde som pridal rozlisenie 1680*1050:
Kód: [Vybrat]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "fglrx"
Busid "PCI:1:5:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
Horizsync 28-51
Vertrefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
EDIT: Uz som skusil aj vsetky ostatne rozlisenia zmazat a nehat tam len 1680*1050, ale potom som videl len cast obrazovky a nevidel som spodne menu a len tak tak som dokazal spustit terminal, kedze BAR kde sa terminal nachadza mam umiestneny dole.

frisbee

  • Návštěvník
  • Příspěvků: 18
  • D'OH!
Re: Ako zvacsit rozlisenie?
« Odpověď #2 kdy: 10 Října 2007, 15:35:28 »
ta samá věc, dřív jsem měl nvidia kartu a šlo tam měnit rozlišení bez keců. s atinou se člověk nazlobí daleko víc než s nvidií. nicméně v xorgu bych to neměnil. spíš aticonfig --resolution ... ale to mi hlásí tohle:

 error at set screen resolution : screen0 does not exist

což je zase nějaká hrobařina.
"Burn,baby,burn!"

Judas 14:3

frisbee

  • Návštěvník
  • Příspěvků: 18
  • D'OH!
Re: Ako zvacsit rozlisenie?
« Odpověď #3 kdy: 10 Října 2007, 16:31:15 »
hotovo dvacet, problem vyresen ... je potreba pouzit reconfigure na xorg.conf ... ja jsem si tenhle soubor krasne domrvil. je potreba vypnout gdm a pak to nastavit.
"Burn,baby,burn!"

Judas 14:3

 

Provoz zaštiťuje spolek OpenAlt.