refresh rate monitoru

[Marek_]

Dobrý den,
snažím se nastavit obnovovací frekvenci na 75Hz, ale stále zůstává jen na 60Hz, už jsem editoval xorg.conf snad tisíckrát. Už jsem si myslel, že to opraví "DynamicTwinView" "False" ale ne! Prostě 75Hz tam dostanu jen přes nvidia-settings a tam v tom combu to vyberu, nebo pokud nabootuju do recovery a jako root dám strartx. Divné co.
mám GeForce 2 MX  ovladač mám přes envy snad nejnovější legacy
Prosím, bolí mě oči

xorg.conf

Kód: [Vybrat]

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Sep  5 19:29:10 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "cz"
    Option         "XkbVariant" "qwerty"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Mon"
ModelName      "Samsung"
    HorizSync       30.0 - 61.0
    VertRefresh     50.0 - 120.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "nVidia Corporation NV11DDR [GeForce2 MX200]"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV11DDR [GeForce2 MX200]"
    Monitor        "Mon"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Depth       24
        Modes      "1024x768_75"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection
 


xorg2

Kód: [Vybrat]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
        Load    "xgl"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
Option "XkbVariant" "qwerty"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA GEFORCE "
Driver "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce2 MX 100/200"
    Option         "AllowGLXWithComposite" "true"
    Option         "backingstore" "true"
    Option         "TripleBuffer" "true"
    Option         "AGPFastWrite" "on"
    Option         "AddARGBGLXVisuals" "True"
BusID "PCI:1:0:0"
Option "RenderAccel" "true"
       
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "ObecnĂ˝ monitor"
    VendorName     "Unknown"
    ModelName      "Samsung"
    HorizSync       30.0 - 61.0
    VertRefresh     50.0 - 120.0
    Option         "DPMS"
# 1024x768 @ 75.00 Hz (GTF) hsync: 60.15 kHz; pclk: 81.80 MHz
  Modeline "1024x768_75.00"  81.80  1024 1080 1192 1360  768 769 772 802  -HSync +Vsync
EndSection


Section "Screen"
  Option "RenderAccel" "true"
Identifier "Default Screen"
Device "NVIDIA GEFORCE "
Monitor "ObecnĂ˝ monitor"
DefaultDepth 24
Option         "metamodes" "1024x768_75 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768_75.00" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection



[TIBOR]

To nvidia-setting spusti cez
sudo nvidia-setting
a daj to ulozit. Takto by to malo do xorg.conf zapisat.

Este doplnim ze ak chces cez nvidia-settings nastavovat jas tak musis do
system-predvolby-relacie-programy pri starte zadat

nvidia-settings --load-config-only

[qUAKER]

V sekci Monitor nech jen radky Identifer a Option "DPMS" ,uloz a restartuj Xka. Xorg si automaticky zvoli nejvyssi frekvenci.

aby to vypadalo takhle

Kód: [Vybrat]

Section "Monitor"
    Identifier     "Mon"
    Option         "DPMS"
EndSection

[Marek_]

tak musím trochu přeformulovat dotaz. Ono to je funkční 75Hz i pro ostatní uživatele, vyjma jednoho (mě :-) Tedy normální uživatele mají 75Hz, root a startx taky 75, ale já s admin učtem jen 60Hz. Kde se to tedy nastavuje individualne, compiz tam mám nainstalovaný, ale zatím ho vůbec nespouštím.