Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Nastavení jasu [vyřešeno]  (Přečteno 1602 krát)

MisfiT

  • Návštěvník
  • Příspěvků: 89
    • Metal-Fórum.cz
Nastavení jasu [vyřešeno]
« kdy: 01 Března 2008, 11:05:47 »
Tak už zase otravuju...

Můj monitor CRT je zkrátka moc tmavý, i když mám na něm nastaven Jas i Kontrast na maximum. Hledal jsem tu odpověď, ale našel jsem rady pro notebooky.
« Poslední změna: 01 Března 2008, 16:02:28 od MisfiT »

Martin 'Želva' Malý

  • Závislák
  • ***
  • Příspěvků: 2438
  • Zalezlej v krunýři
    • Želvův zápisník
Re: Nastavení jasu
« Odpověď #1 kdy: 01 Března 2008, 11:31:51 »
Pošlete nám se váš /etc/X11/xorg.conf.

Před jakékoliv editování si udělejte zálohu!!!
Osobní počítače jsou nanic a opravdu nikdy nedělají to, co se po nich chce. Fakt. I když na něm třeba běží Debian, Ubuntu, Arch, Widle, Mac, je to skoro furt to samé... :-(

Pokud mi dáváte zápornou karmu, budu rád, když mi napíšete proč, abych aspoň věděl, jak jsem vám uškodil. ;-)

MisfiT

  • Návštěvník
  • Příspěvků: 89
    • Metal-Fórum.cz
Re: Nastavení jasu
« Odpověď #2 kdy: 01 Března 2008, 11:51:37 »
Kód: [Vybrat]
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Emulate3Buttons" "true"
Option "Device" "/dev/input/mice"
        Option          "Protocol"              "auto"
Option "Protocol" "ImPS/2"
        Option          "Buttons"               "7"
Option "ZAxisMapping" "4 5"
        Option          "ButtonMapping"         "1 2 3 6 7 4 5 6"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation G70 [GeForce 7300 GT]"
Boardname "nv"
Busid "PCI:2:0:0"
Driver "nvidia"
Screen 0
EndSection

Section "Monitor"
Identifier "E700B"
Vendorname "Generic CRT Display"
Modelname "Monitor 1280x1024"
Horizsync 31.5-81.0
Vertrefresh 50-75
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7300 GT]"
Monitor "E700B"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1600 1200
Modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x1024@60" "1024x768@60" "1280x960@75" "1024x768@70" "1400x1050@60" "1024x768@75" "1600x1200@65" "832x624@75" "1600x1200@60" "800x600@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "device" #
Identifier "device1"
Boardname "nv"
Busid "PCI:2:0:0"
Driver "nvidia"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
EndSection
Section "monitor" #
Identifier "monitor1"
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection

MisfiT

  • Návštěvník
  • Příspěvků: 89
    • Metal-Fórum.cz
Re: Nastavení jasu
« Odpověď #3 kdy: 01 Března 2008, 16:02:10 »
Kód: [Vybrat]
xgamma -gamma 1.5

madog

  • Návštěvník
  • Příspěvků: 16
Re: Nastavení jasu [vyřešeno]
« Odpověď #4 kdy: 21 Března 2008, 11:43:47 »
proč se mi to vždy po restartu vrátí do původní "tmavosti" .. ? použil jsem
Kód: [Vybrat]
xgamma -gamma 1.5
V LINUX SEM TOTÁLNÍ LAMA - TEPRVE JSEM ZAČAL, POMALU NA MĚ :-D

 

Provoz zaštiťuje spolek OpenAlt.