dmesg[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4120
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8210 checksum 0
[ 0.000000] ACPI: RSDP 000F8210, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 1FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 1FFF3180, 60AE (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1FFF0000, 0040
[ 0.000000] ACPI: MCFG 1FFF9340, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 1FFF9280, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Built 1 zonelists. Total pages: 130033
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1607.448 MHz processor.
[ 32.224674] spurious 8259A interrupt: IRQ7.
[ 32.225510] Console: colour VGA+ 80x25
[ 32.225724] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 32.225966] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 32.235979] Memory: 507916k/524224k available (2015k kernel code, 15676k reserved, 916k data, 364k init, 0k highmem)
[ 32.235991] virtual kernel memory layout:
[ 32.235992] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 32.235993] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 32.235995] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 32.235996] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 32.235998] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 32.235999] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 32.236001] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 32.236004] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 32.236041] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 32.316056] Calibrating delay using timer specific routine.. 3216.98 BogoMIPS (lpj=6433975)
[ 32.316080] Security Framework v1.0.0 initialized
[ 32.316085] SELinux: Disabled at boot.
[ 32.316098] Mount-cache hash table entries: 512
[ 32.316203] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 32.316213] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 32.316216] CPU: L2 Cache: 256K (64 bytes/line)
[ 32.316218] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 32.316228] Compat vDSO mapped to ffffe000.
[ 32.316238] Checking 'hlt' instruction... OK.
[ 32.332170] SMP alternatives: switching to UP code
[ 32.332368] Freeing SMP alternatives: 11k freed
[ 32.332672] Early unpacking initramfs... done
[ 32.698437] ACPI: Core revision 20070126
[ 32.698529] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 32.702178] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[ 32.702196] Total of 1 processors activated (3216.98 BogoMIPS).
[ 32.702336] ENABLING IO-APIC IRQs
[ 32.702527] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 32.848092] Brought up 1 CPUs
[ 32.848202] Booting paravirtualized kernel on bare hardware
[ 32.848246] Time: 7:46:43 Date: 02/05/108
[ 32.848267] NET: Registered protocol family 16
[ 32.848342] EISA bus registered
[ 32.848351] ACPI: bus type pci registered
[ 32.853069] PCI: PCI BIOS revision 3.00 entry at 0xfac70, last bus=5
[ 32.853072] PCI: Using configuration type 1
[ 32.853074] Setting up standard PCI resources
[ 32.857460] ACPI: EC: Look up EC in DSDT
[ 32.864266] ACPI: Interpreter enabled
[ 32.864269] ACPI: (supports S0 S1 S4 S5)
[ 32.864285] ACPI: Using IOAPIC for interrupt routing
[ 32.874882] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.874888] PCI: Probing PCI hardware (bus 00)
[ 32.875337] PCI: Transparent bridge - 0000:00:09.0
[ 32.875648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.875976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 32.949518] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.949742] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 32.949966] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 32.950185] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.950404] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.950624] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 32.950845] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.951065] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 32.951284] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 32.951503] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.951723] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 32.951946] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 32.952174] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.952404] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 32.952635] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 32.952865] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.953027] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 32.953184] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 32.953340] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 32.953496] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 32.953653] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 32.953896] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 32.954135] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 32.954378] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 32.954615] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 32.954852] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 32.955089] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 32.955326] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 32.955563] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 32.955808] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 32.956053] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 32.956301] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 32.956422] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.956433] pnp: PnP ACPI init
[ 32.956446] ACPI: bus type pnp registered
[ 32.962228] pnp: PnP ACPI: found 13 devices
[ 32.962231] ACPI: ACPI bus type pnp unregistered
[ 32.962235] PnPBIOS: Disabled by ACPI PNP
[ 32.962290] PCI: Using ACPI for IRQ routing
[ 32.962296] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 33.028939] NET: Registered protocol family 8
[ 33.028941] NET: Registered protocol family 20
[ 33.028999] pnp: 00:00: ioport range 0x4000-0x407f has been reserved
[ 33.029002] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 33.029005] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 33.029009] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved
[ 33.029012] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
[ 33.029015] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
[ 33.029029] pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[ 33.029035] pnp: 00:0c: iomem range 0xd0000-0xd3fff has been reserved
[ 33.029038] pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 33.029041] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 33.029045] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 33.032057] Time: tsc clocksource has been installed.
[ 33.059313] PCI: Bridge: 0000:00:09.0
[ 33.059316] IO window: a000-afff
[ 33.059319] MEM window: fde00000-fdefffff
[ 33.059323] PREFETCH window: fdf00000-fdffffff
[ 33.059326] PCI: Bridge: 0000:00:0b.0
[ 33.059328] IO window: 9000-9fff
[ 33.059332] MEM window: fdd00000-fddfffff
[ 33.059335] PREFETCH window: fdc00000-fdcfffff
[ 33.059338] PCI: Bridge: 0000:00:0c.0
[ 33.059340] IO window: 8000-8fff
[ 33.059343] MEM window: fdb00000-fdbfffff
[ 33.059346] PREFETCH window: fda00000-fdafffff
[ 33.059349] PCI: Bridge: 0000:00:0d.0
[ 33.059351] IO window: 7000-7fff
[ 33.059355] MEM window: fd900000-fd9fffff
[ 33.059358] PREFETCH window: fd800000-fd8fffff
[ 33.059363] PCI: Bridge: 0000:00:0e.0
[ 33.059365] IO window: 6000-6fff
[ 33.059368] MEM window: fd700000-fd7fffff
[ 33.059371] PREFETCH window: d0000000-dfffffff
[ 33.059379] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 33.059388] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 33.059394] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 33.059401] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 33.059407] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 33.059420] NET: Registered protocol family 2
[ 33.096097] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 33.096143] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 33.096299] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 33.096420] TCP: Hash tables configured (established 16384 bind 16384)
[ 33.096423] TCP reno registered
[ 33.108189] checking if image is initramfs... it is
[ 33.560061] Switched to high resolution mode on CPU 0
[ 33.830627] Freeing initrd memory: 7305k freed
[ 33.830998] audit: initializing netlink socket (disabled)
[ 33.831011] audit(1204703203.196:1): initialized
[ 33.832738] VFS: Disk quotas dquot_6.5.1
[ 33.832786] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 33.832874] io scheduler noop registered
[ 33.832876] io scheduler anticipatory registered
[ 33.832879] io scheduler deadline registered
[ 33.832894] io scheduler cfq registered (default)
[ 33.847974] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
[ 33.847982] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 33.847988] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
[ 33.847996] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 33.848002] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
[ 33.848010] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 33.848016] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
[ 33.848024] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 33.848032] Boot video device is 0000:05:00.0
[ 33.848115] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 33.848136] assign_interrupt_mode Found MSI capability
[ 33.848139] Allocate Port Service[0000:00:0b.0:pcie00]
[ 33.848197] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 33.848217] assign_interrupt_mode Found MSI capability
[ 33.848220] Allocate Port Service[0000:00:0c.0:pcie00]
[ 33.848272] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 33.848292] assign_interrupt_mode Found MSI capability
[ 33.848295] Allocate Port Service[0000:00:0d.0:pcie00]
[ 33.848350] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 33.848370] assign_interrupt_mode Found MSI capability
[ 33.848373] Allocate Port Service[0000:00:0e.0:pcie00]
[ 33.848483] isapnp: Scanning for PnP cards...
[ 34.201183] isapnp: No Plug & Play device found
[ 34.227186] Real Time Clock Driver v1.12ac
[ 34.227276] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 34.227356] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.228130] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.228826] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 34.229025] input: Macintosh mouse button emulation as /class/input/input0
[ 34.229092] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 34.229095] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 34.480225] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.480360] mice: PS/2 mouse device common for all mice
[ 34.480462] EISA: Probing bus 0 at eisa.0
[ 34.480476] Cannot allocate resource for EISA slot 4
[ 34.480482] Cannot allocate resource for EISA slot 6
[ 34.480484] Cannot allocate resource for EISA slot 7
[ 34.480486] Cannot allocate resource for EISA slot 8
[ 34.480489] EISA: Detected 0 cards.
[ 34.480580] TCP cubic registered
[ 34.480593] NET: Registered protocol family 1
[ 34.480616] Using IPI No-Shortcut mode
[ 34.480781] Magic number: 0:332:773
[ 34.480869] hash matches device ptyp9
[ 34.481169] Freeing unused kernel memory: 364k freed
[ 34.523935] input: AT Translated Set 2 keyboard as /class/input/input1
[ 35.693496] AppArmor: AppArmor initialized<5>audit(1204703205.196:2): type=1505 info="AppArmor initialized" pid=1236
[ 35.701909] fuse init (API version 7.8)
[ 35.707598] Failure registering capabilities with primary security module.
[ 35.716235] ACPI: Fan [FAN] (on)
[ 35.721547] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 35.722745] ACPI: Thermal Zone [THRM] (22 C)
[ 36.291986] usbcore: registered new interface driver usbfs
[ 36.292011] usbcore: registered new interface driver hub
[ 36.292032] usbcore: registered new device driver usb
[ 36.292762] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 36.293179] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 36.293189] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
[ 36.293200] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 36.293204] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 36.293352] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 36.293370] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000
[ 36.318370] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 36.318377] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 36.344493] SCSI subsystem initialized
[ 36.349537] libata version 2.21 loaded.
[ 36.354095] usb usb1: configuration #1 chosen from 1 choice
[ 36.354122] hub 1-0:1.0: USB hub found
[ 36.354132] hub 1-0:1.0: 10 ports detected
[ 36.418261] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 36.455894] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[ 36.455913] NFORCE-CK804: chipset revision 162
[ 36.455916] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 36.455922] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
[ 36.455930] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[ 36.455940] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[ 36.455948] Probing IDE interface ide0...
[ 36.650418] FDC 0 is a post-1991 82077
[ 36.759636] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 36.973028] usb 1-1: configuration #1 chosen from 1 choice
[ 36.988011] usbcore: registered new interface driver hiddev
[ 36.994276] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input2
[ 36.994414] input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1
[ 36.994429] usbcore: registered new interface driver usbhid
[ 36.994433] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 37.191662] hda: TEAC DV-W516GC, ATAPI CD/DVD-ROM drive
[ 37.864095] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 37.876732] Probing IDE interface ide1...
[ 38.444772] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 38.444782] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
[ 38.444793] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 38.444797] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 38.445010] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 38.445040] ehci_hcd 0000:00:02.1: debug port 1
[ 38.445044] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 38.445055] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000
[ 38.445060] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 38.445089] usb 1-1: USB disconnect, address 2
[ 38.449521] usb usb2: configuration #1 chosen from 1 choice
[ 38.449666] hub 2-0:1.0: USB hub found
[ 38.449677] hub 2-0:1.0: 10 ports detected
[ 38.555265] sata_nv 0000:00:07.0: version 3.4
[ 38.555762] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 38.555772] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18
[ 38.555777] sata_nv 0000:00:07.0: Using ADMA mode
[ 38.555823] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 38.555947] scsi0 : sata_nv
[ 38.556273] scsi1 : sata_nv
[ 38.556470] ata1: SATA max UDMA/133 cmd 0xe0840480 ctl 0xe08404a0 bmdma 0x0001cc00 irq 18
[ 38.556474] ata2: SATA max UDMA/133 cmd 0xe0840580 ctl 0xe08405a0 bmdma 0x0001cc08 irq 18
[ 38.578999] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 38.579009] Uniform CD-ROM driver Revision: 3.20
[ 39.023390] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 39.031559] ata1.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 39.031563] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 39.039573] ata1.00: configured for UDMA/133
[ 39.059378] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 39.272839] usb 1-1: configuration #1 chosen from 1 choice
[ 39.282939] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3
[ 39.282960] input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1
[ 39.351347] ata2: SATA link down (SStatus 0 SControl 300)
[ 39.351460] scsi 0:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 39.351469] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 39.352000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 39.352009] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19
[ 39.352015] sata_nv 0000:00:08.0: Using ADMA mode
[ 39.352058] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 39.352147] scsi2 : sata_nv
[ 39.352190] scsi3 : sata_nv
[ 39.352249] ata3: SATA max UDMA/133 cmd 0xe08be480 ctl 0xe08be4a0 bmdma 0x0001b800 irq 19
[ 39.352253] ata4: SATA max UDMA/133 cmd 0xe08be580 ctl 0xe08be5a0 bmdma 0x0001b808 irq 19
[ 39.819299] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 39.827474] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 39.827477] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 39.835461] ata3.00: configured for UDMA/133
[ 40.147258] ata4: SATA link down (SStatus 0 SControl 300)
[ 40.147369] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 40.147377] ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 40.148214] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 40.148219] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
[ 40.148226] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 40.148234] forcedeth: using HIGHDMA
[ 40.159135] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 40.159157] sd 0:0:0:0: [sda] Write Protect is off
[ 40.159160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.159176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.159229] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 40.159238] sd 0:0:0:0: [sda] Write Protect is off
[ 40.159241] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.159286] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.159291] sda: sda1 < sda5 sda6 sda7 >
[ 40.213445] sd 0:0:0:0: [sda] Attached SCSI disk
[ 40.213616] sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
[ 40.213629] sd 2:0:0:0: [sdb] Write Protect is off
[ 40.213632] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.213647] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.213689] sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
[ 40.213699] sd 2:0:0:0: [sdb] Write Protect is off
[ 40.213701] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.213716] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.213720] sdb: sdb1
[ 40.233232] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 40.237432] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 40.237454] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 40.667446] eth0: forcedeth.c: subsystem: 01695:1010 bound to 0000:00:0a.0
[ 42.704311] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 42.746269] ISO 9660 Extensions: RRIP_1991A
[ 43.113883] Registering unionfs 1.4
[ 43.113887] unionfs: debugging is not enabled
[ 43.125271] loop: module loaded
[ 43.394868] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
[ 96.496960] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 96.497008] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 97.382023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 97.425993] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 97.529348] Linux video capture interface: v2.00
[ 97.960597] parport_pc 00:09: reported by Plug and Play ACPI
[ 97.960643] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 98.189302] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 98.189589] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 98.189598] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 20
[ 98.189607] saa7133[0]: found at 0000:01:05.0, rev: 209, irq: 20, latency: 32, mmio: 0xfdeff000
[ 98.189613] saa7133[0]: subsystem: 1461:2c00, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 98.189622] saa7133[0]: board init: gpio is 2a600
[ 98.324775] saa7133[0]: i2c eeprom 00: 61 14 00 2c 00 00 00 00 00 00 00 00 00 00 00 00
[ 98.324784] saa7133[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[ 98.324792] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a3 ff ff ff ff
[ 98.324800] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.324807] saa7133[0]: i2c eeprom 40: ff 32 00 c0 86 1e ff ff ff ff ff ff ff ff ff ff
[ 98.324814] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.324822] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.324829] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.325127] saa7133[0]: registered device video0 [v4l2]
[ 98.325158] saa7133[0]: registered device vbi0
[ 98.406008] input: PC Speaker as /class/input/input4
[ 98.504500] saa7134 ALSA driver for DMA sound loaded
[ 98.504530] saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 20 registered as card -2
[ 98.941778] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 98.941784] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
[ 98.941805] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 99.264674] intel8x0_measure_ac97_clock: measured 54826 usecs
[ 99.264678] intel8x0: clocking to 46994
[ 101.131745] Adding 1076312k swap on /dev/sda7. Priority:-1 extents:1 across:1076312k
[ 104.033846] No dock devices found.
[ 104.117534] input: Power Button (FF) as /class/input/input5
[ 104.121904] ACPI: Power Button (FF) [PWRF]
[ 104.165828] input: Power Button (CM) as /class/input/input6
[ 104.170181] ACPI: Power Button (CM) [PWRB]
[ 105.109194] powernow-k8: Power state transitions not supported
[ 105.143142] ACPI Exception (processor_perflib-0234): AE_NOT_FOUND, Evaluating _PSS [20070126]
[ 109.963947] lp0: using parport0 (interrupt-driven).
[ 110.133255] ppdev: user-space parallel port driver
[ 111.915835] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 111.915840] apm: overridden by ACPI.
[ 112.257649] Failure registering capabilities with primary security module.
[ 113.088619] Bluetooth: Core ver 2.11
[ 113.088733] NET: Registered protocol family 31
[ 113.088736] Bluetooth: HCI device and connection manager initialized
[ 113.088740] Bluetooth: HCI socket layer initialized
[ 113.194721] Bluetooth: L2CAP ver 2.8
[ 113.194726] Bluetooth: L2CAP socket layer initialized
[ 113.366696] Bluetooth: RFCOMM socket layer initialized
[ 113.366778] Bluetooth: RFCOMM TTY layer initialized
[ 113.366780] Bluetooth: RFCOMM ver 1.8
[ 118.924196] NET: Registered protocol family 17
[ 119.087066] Linux agpgart interface v0.102 (c) Dave Jones
[ 119.141433] [drm] Initialized drm 1.1.0 20060810
[ 119.181211] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 119.181223] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 21
[ 119.183666] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[ 121.752119] [drm] Setting GART location based on new memory map
[ 121.752482] [drm] Loading R300 Microcode
[ 121.752507] [drm] writeback test succeeded in 1 usecs
[ 124.988266] NET: Registered protocol family 10
[ 124.988441] lo: Disabled Privacy Extensions
[ 135.312652] eth0: no IPv6 routers present
[ 421.965541] FAT: bogus number of reserved sectors
[ 421.965548] VFS: Can't find a valid FAT filesystem on dev sdb1.
[ 624.663586] FAT: bogus number of reserved sectors
[ 624.663593] VFS: Can't find a valid FAT filesystem on dev sdb1.
[ 650.572564] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 759.982035] kjournald starting. Commit interval 5 seconds
[ 759.982313] EXT3 FS on sda6, internal journal
[ 759.982317] EXT3-fs: recovery complete.
[ 759.982570] EXT3-fs: mounted filesystem with ordered data mode.
Téma: Zamrzne při startu (Přečteno 4428 krát)
