Jak zprovoznit USB to IrDA ADAPTOR?
Popis hardware:
http://www.fontastic.cz/detail464/adapter-irda-usb-(fir-sir-mir).asp&zskup=&trideni=Zkoušel jsem návody podle:
1)
http://ubuntuforums.org/showthread.php?t=2068962)
http://www.linuxsoft.cz/article.php?id_article=12373)
https://help.ubuntu.com/community/IrdaHowtoPoužil jsem víc návodů a vždycky něco nefungovalo. Asi jsem to použitím několika návodů jenom zkomplikoval.
V konqueroru příkaz
obex://irda/ taky nefunguje.
---
Naistaloval jsem:
irda-utils 0.9.18-7ubuntu2
setserial
kdebluetooth 1.0~beta9~r769275-0ubuntu1
---
dmesg[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d40
[ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524272
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524272
[ 0.000000] On node 0 totalpages: 524272
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292593 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6690 checksum 0
[ 0.000000] ACPI: RSDP 000F6690, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 7FFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 7FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 7FFF30C0, 3829 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 7FFF0000, 0040
[ 0.000000] ACPI: APIC 7FFF6900, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177
[ 0.000000] Kernel command line: root=UUID=a719c955-0bfc-4ca2-a119-f1498e72c978 ro quiet splash locale=cs_CZ
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2424.058 MHz processor.
[ 19.527114] Console: colour VGA+ 80x25
[ 19.527120] console [tty0] enabled
[ 19.527902] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 19.529158] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 19.691085] Memory: 2066808k/2097088k available (2177k kernel code, 29076k reserved, 1006k data, 368k init, 1179584k highmem)
[ 19.691096] virtual kernel memory layout:
[ 19.691097] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 19.691098] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.691099] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 19.691100] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 19.691101] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 19.691102] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 19.691104] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 19.691107] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 19.691176] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 19.771123] Calibrating delay using timer specific routine.. 4852.79 BogoMIPS (lpj=9705593)
[ 19.771164] Security Framework initialized
[ 19.771175] SELinux: Disabled at boot.
[ 19.771196] AppArmor: AppArmor initialized
[ 19.771204] Failure registering capabilities with primary security module.
[ 19.771216] Mount-cache hash table entries: 512
[ 19.771413] Initializing cgroup subsys ns
[ 19.771422] Initializing cgroup subsys cpuacct
[ 19.771440] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[ 19.771456] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 19.771459] CPU: L2 cache: 128K
[ 19.771462] CPU: Hyper-Threading is disabled
[ 19.771465] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[ 19.771481] Compat vDSO mapped to ffffe000.
[ 19.771501] Checking 'hlt' instruction... OK.
[ 19.787564] SMP alternatives: switching to UP code
[ 19.789523] Freeing SMP alternatives: 11k freed
[ 19.789698] Early unpacking initramfs... done
[ 20.190032] ACPI: Core revision 20070126
[ 20.190102] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 20.193616] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
[ 20.193667] Total of 1 processors activated (4852.79 BogoMIPS).
[ 20.193811] ENABLING IO-APIC IRQs
[ 20.194001] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 20.338666] Brought up 1 CPUs
[ 20.338698] CPU0 attaching sched-domain:
[ 20.338702] domain 0: span 01
[ 20.338705] groups: 01
[ 20.339090] net_namespace: 64 bytes
[ 20.339101] Booting paravirtualized kernel on bare hardware
[ 20.339871] Time: 17:50:43 Date: 08/06/08
[ 20.339921] NET: Registered protocol family 16
[ 20.340602] EISA bus registered
[ 20.340641] ACPI: bus type pci registered
[ 20.367027] PCI: PCI BIOS revision 2.10 entry at 0xfa330, last bus=2
[ 20.367030] PCI: Using configuration type 1
[ 20.367036] Setting up standard PCI resources
[ 20.377230] ACPI: EC: Look up EC in DSDT
[ 20.381378] ACPI: Interpreter enabled
[ 20.381386] ACPI: (supports S0 S1 S4 S5)
[ 20.381410] ACPI: Using IOAPIC for interrupt routing
[ 20.391322] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.391851] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 20.391853] * this clock source is slow. If you are sure your timer does not have
[ 20.391855] * this bug, please use "acpi_pm_good" to disable the workaround
[ 20.391906] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 20.391910] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 20.392653] PCI: Transparent bridge - 0000:00:1e.0
[ 20.392695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.392885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 20.401166] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 20.401319] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 20.401468] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 20.401612] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 20.401758] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.401901] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 20.402045] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.402189] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 20.402580] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.402695] pnp: PnP ACPI init
[ 20.402714] ACPI: bus type pnp registered
[ 20.408359] pnp: PnP ACPI: found 13 devices
[ 20.408366] ACPI: ACPI bus type pnp unregistered
[ 20.408373] PnPBIOS: Disabled by ACPI PNP
[ 20.409232] PCI: Using ACPI for IRQ routing
[ 20.409239] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 20.494485] NET: Registered protocol family 8
[ 20.494490] NET: Registered protocol family 20
[ 20.494676] AppArmor: AppArmor Filesystem Enabled
[ 20.498394] Time: tsc clocksource has been installed.
[ 20.506534] system 00:00: iomem range 0xcc000-0xd3fff has been reserved
[ 20.506539] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 20.506542] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 20.506545] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 20.506549] system 00:00: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 20.506552] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 20.506555] system 00:00: iomem range 0x100000-0x7ffeffff could not be reserved
[ 20.506559] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 20.506563] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 20.506566] system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 20.506569] system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
[ 20.506573] system 00:00: iomem range 0xe0000-0xeffff has been reserved
[ 20.506584] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 20.506587] system 00:02: ioport range 0x290-0x29f has been reserved
[ 20.506590] system 00:02: ioport range 0x800-0x804 has been reserved
[ 20.537925] PCI: Bridge: 0000:00:01.0
[ 20.537932] IO window: 9000-9fff
[ 20.537937] MEM window: e8000000-e9ffffff
[ 20.537941] PREFETCH window: d8000000-e7ffffff
[ 20.537947] PCI: Bridge: 0000:00:1e.0
[ 20.537950] IO window: a000-afff
[ 20.537956] MEM window: ea000000-ea0fffff
[ 20.537960] PREFETCH window: disabled.
[ 20.537980] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 20.538000] NET: Registered protocol family 2
[ 20.574431] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.574926] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 20.576522] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.577338] TCP: Hash tables configured (established 131072 bind 65536)
[ 20.577344] TCP reno registered
[ 20.586519] checking if image is initramfs... it is
[ 21.037856] Switched to high resolution mode on CPU 0
[ 21.342905] Freeing initrd memory: 7728k freed
[ 21.344403] audit: initializing netlink socket (disabled)
[ 21.344426] audit(1218045043.548:1): initialized
[ 21.344756] highmem bounce pool size: 64 pages
[ 21.349712] VFS: Disk quotas dquot_6.5.1
[ 21.349904] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.350204] io scheduler noop registered
[ 21.350209] io scheduler anticipatory registered
[ 21.350211] io scheduler deadline registered
[ 21.350248] io scheduler cfq registered (default)
[ 21.350334] Boot video device is 0000:01:00.0
[ 21.351180] isapnp: Scanning for PnP cards...
[ 21.704987] isapnp: No Plug & Play device found
[ 21.853417] Real Time Clock Driver v1.12ac
[ 21.853672] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.853896] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.854265] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 21.856023] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.856865] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 21.859273] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.859438] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 21.859706] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 21.859711] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 21.860436] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.869251] mice: PS/2 mouse device common for all mice
[ 21.869637] EISA: Probing bus 0 at eisa.0
[ 21.869659] Cannot allocate resource for EISA slot 4
[ 21.869661] Cannot allocate resource for EISA slot 5
[ 21.869674] EISA: Detected 0 cards.
[ 21.869679] cpuidle: using governor ladder
[ 21.869681] cpuidle: using governor menu
[ 21.869819] NET: Registered protocol family 1
[ 21.869868] Using IPI No-Shortcut mode
[ 21.869926] registered taskstats version 1
[ 21.870066] Magic number: 4:54:845
[ 21.870164] hash matches device ptyre
[ 21.870210] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 21.870213] EDD information not available.
[ 21.870740] Freeing unused kernel memory: 368k freed
[ 21.896958] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 23.304425] fuse init (API version 7.9)
[ 23.348675] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 24.306456] usbcore: registered new interface driver usbfs
[ 24.306499] usbcore: registered new interface driver hub
[ 24.322912] usbcore: registered new device driver usb
[ 24.338325] USB Universal Host Controller Interface driver v3.0
[ 24.338424] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.338440] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 24.338445] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 24.338943] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 24.338984] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
[ 24.339205] usb usb1: configuration #1 chosen from 1 choice
[ 24.339250] hub 1-0:1.0: USB hub found
[ 24.339262] hub 1-0:1.0: 2 ports detected
[ 24.415872] 8139too Fast Ethernet driver 0.9.28
[ 24.442315] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 24.442340] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 24.442346] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 24.442403] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 24.442443] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b000
[ 24.442627] usb usb2: configuration #1 chosen from 1 choice
[ 24.442668] hub 2-0:1.0: USB hub found
[ 24.442681] hub 2-0:1.0: 2 ports detected
[ 24.476574] SCSI subsystem initialized
[ 24.543227] libata version 3.00 loaded.
[ 24.546217] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 24.546235] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 24.546240] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 24.546293] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 24.546329] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[ 24.546515] usb usb3: configuration #1 chosen from 1 choice
[ 24.546561] hub 3-0:1.0: USB hub found
[ 24.546576] hub 3-0:1.0: 2 ports detected
[ 24.650240] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 24.650264] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 24.650269] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 24.650332] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 24.654277] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 24.654297] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xea100000
[ 24.662807] Floppy drive(s): fd0 is 1.44M
[ 24.669943] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 24.670135] usb usb4: configuration #1 chosen from 1 choice
[ 24.670184] hub 4-0:1.0: USB hub found
[ 24.670198] hub 4-0:1.0: 6 ports detected
[ 24.681708] FDC 0 is a post-1991 82077
[ 24.774176] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 24.774937] eth0: RealTek RTL8139 at 0xa400, 00:0d:61:4e:74:6f, IRQ 20
[ 24.774942] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 24.782719] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 24.790522] ata_piix 0000:00:1f.1: version 2.12
[ 24.790549] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 24.790610] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 24.792890] scsi0 : ata_piix
[ 24.794696] scsi1 : ata_piix
[ 24.795503] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 24.795508] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 25.141906] ata1.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 25.141915] ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100
[ 25.141918] ata1.00: 156301488 sectors, multi 16: LBA48
[ 25.142065] ata1.01: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100
[ 25.142069] ata1.01: 234493056 sectors, multi 16: LBA48
[ 25.157851] ata1.00: configured for UDMA/100
[ 25.165767] ata1.01: configured for UDMA/100
[ 25.485430] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.03, max UDMA/66
[ 25.485451] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 25.600954] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 25.657228] ata2.00: configured for UDMA/33
[ 25.657436] scsi 0:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
[ 25.657664] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP1213N TL10 PQ: 0 ANSI: 5
[ 25.659274] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.03 PQ: 0 ANSI: 5
[ 25.720823] usb 3-1: device descriptor read/64, error -71
[ 25.952669] Driver 'sd' needs updating - please use bus_type methods
[ 25.952815] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 25.952848] sd 0:0:0:0: [sda] Write Protect is off
[ 25.952853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.952905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.953020] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 25.953052] sd 0:0:0:0: [sda] Write Protect is off
[ 25.953057] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.953110] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.953119] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 25.981454] sda5<6>usb 3-1: configuration #1 chosen from 1 choice
[ 25.990936] sda6 >
[ 25.991123] sd 0:0:0:0: [sda] Attached SCSI disk
[ 25.991282] sd 0:0:1:0: [sdb] 234493056 512-byte hardware sectors (120060 MB)
[ 25.991319] sd 0:0:1:0: [sdb] Write Protect is off
[ 25.991324] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 25.991380] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.991502] sd 0:0:1:0: [sdb] 234493056 512-byte hardware sectors (120060 MB)
[ 25.991538] sd 0:0:1:0: [sdb] Write Protect is off
[ 25.991543] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 25.991603] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.991612] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
[ 26.054929] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 26.075328] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 26.075336] Uniform CD-ROM driver Revision: 3.20
[ 26.075423] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 26.075599] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.075632] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 26.075666] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 26.230104] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 26.415566] usb 3-2: configuration #1 chosen from 1 choice
[ 26.450495] usbcore: registered new interface driver hiddev
[ 26.484935] input: Microsoft Microsoft Wireless Optical Mouse� 1.0A as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input2
[ 26.496014] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse� 1.0A] on usb-0000:00:1d.2-2
[ 26.496042] usbcore: registered new interface driver usbhid
[ 26.496047] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 26.868375] Attempting manual resume
[ 26.868383] swsusp: Resume From Partition 8:5
[ 26.868385] PM: Checking swsusp image.
[ 26.868641] PM: Resume from disk failed.
[ 26.895758] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 26.895765] EXT3-fs: write access will be enabled during recovery.
[ 34.899024] kjournald starting. Commit interval 5 seconds
[ 34.899053] EXT3-fs: sdb7: orphan cleanup on readonly fs
[ 34.899063] ext3_orphan_cleanup: deleting unreferenced inode 719536
[ 34.899103] EXT3-fs: sdb7: 1 orphan inode deleted
[ 34.899106] EXT3-fs: recovery complete.
[ 34.901958] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.326243] Linux agpgart interface v0.102
[ 50.402174] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 50.455448] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 50.510152] agpgart: Detected an Intel 845G Chipset.
[ 50.518395] agpgart: AGP aperture is 128M @ 0xd0000000
[ 50.616457] intel_rng: FWH not detected
[ 50.771530] iTCO_vendor_support: vendor-support=0
[ 50.846049] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 50.846300] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x4060)
[ 50.846399] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 50.973805] input: Power Button (FF) as /devices/virtual/input/input3
[ 50.985500] ACPI: Power Button (FF) [PWRF]
[ 50.985691] input: Power Button (CM) as /devices/virtual/input/input4
[ 51.001484] ACPI: Power Button (CM) [PWRB]
[ 51.001669] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 51.017606] ACPI: Sleep Button (CM) [SLPB]
[ 51.266092] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 53.020858] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 53.958525] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
[ 53.958564] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 54.138110] irda_init()
[ 54.138141] NET: Registered protocol family 23
[ 54.192876] SigmaTel STIr4200 IRDA/USB found at address 2, Vendor: 66f, Product: 4200
[ 54.193292] /build/buildd/linux-2.6.24/drivers/net/irda/stir4200.c: IrDA: Registered SigmaTel device irda0
[ 54.193343] usbcore: registered new interface driver stir4200
[ 54.281898] intel8x0_measure_ac97_clock: measured 54523 usecs
[ 54.281904] intel8x0: clocking to 48000
[ 54.380780] parport_pc 00:0a: reported by Plug and Play ACPI
[ 54.380830] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 54.621095] NET: Registered protocol family 10
[ 54.621486] lo: Disabled Privacy Extensions
[ 58.020607] lp0: using parport0 (interrupt-driven).
[ 58.087326] IrCOMM protocol (Dag Brattli)
[ 58.315354] Adding 3148700k swap on /dev/sda5. Priority:-1 extents:1 across:3148700k
[ 58.905162] EXT3 FS on sdb7, internal journal
[ 59.092905] device-mapper: uevent: version 1.0.3
[ 59.092955] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 60.865364] kjournald starting. Commit interval 5 seconds
[ 60.865674] EXT3 FS on sda6, internal journal
[ 60.865683] EXT3-fs: mounted filesystem with ordered data mode.
[ 62.206428] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 62.982704] No dock devices found.
[ 64.888693] ppdev: user-space parallel port driver
[ 65.104176] audit(1218045088.264:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5167 profile="/usr/sbin/cupsd" namespace="default"
[ 65.164606] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 65.164616] apm: overridden by ACPI.
[ 65.587106] eth0: no IPv6 routers present
[ 65.683295] irlap_change_speed(), setting speed to 9600
[ 69.707390] Bluetooth: Core ver 2.11
[ 69.708614] NET: Registered protocol family 31
[ 69.708624] Bluetooth: HCI device and connection manager initialized
[ 69.708629] Bluetooth: HCI socket layer initialized
[ 69.767311] Bluetooth: L2CAP ver 2.9
[ 69.767318] Bluetooth: L2CAP socket layer initialized
[ 69.909095] Bluetooth: RFCOMM socket layer initialized
[ 69.909123] Bluetooth: RFCOMM TTY layer initialized
[ 69.909125] Bluetooth: RFCOMM ver 1.8
[ 72.316996] [drm] Initialized drm 1.1.0 20060810
[ 72.336984] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 72.337213] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[ 73.111663] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 73.111695] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 73.111728] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 73.507988] [drm] Setting GART location based on new memory map
[ 73.508008] [drm] Loading R200 Microcode
[ 73.508114] [drm] writeback test succeeded in 1 usecs
[ 896.020292] NET: Registered protocol family 17
[ 940.262675] Clocksource tsc unstable (delta = 28115687350 ns)
[ 940.264643] Time: acpi_pm clocksource has been installed.---
Z toho je asi důležité:
[ 54.192876] SigmaTel STIr4200 IRDA/USB found at address 2, Vendor: 66f, Product: 4200
[ 54.193292] /build/buildd/linux-2.6.24/drivers/net/irda/stir4200.c: IrDA: Registered SigmaTel device irda0
[ 54.193343] usbcore: registered new interface driver stir4200Ještě něco z toho je důležité?
---
příkaz
irattach irda0 -s nedělá nic, nevypisuje nic
---
irdadump vypisuje:
irdadump: Operation not permittedale nedělá nic
---
Pomocí příkazu
lsusb jsem zjistil, jak se zařízení jmenuje:
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 004: ID 066f:4200 SigmaTel, Inc. STIr4200 IrDA Bridge
Bus 003 Device 002: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000V mém případě je to řádek:
Bus 003 Device 004: ID 066f:4200 SigmaTel, Inc. STIr4200 IrDA Bridge---
Ovladače pro Windows na přiloženém miniCD mají v hlavičce:
; Stirusb.inf
; Copyright 2000, SigmaTel, Inc.---
Takže se jedná o zařízení s čipem STiR 4200 od firmy Sigmatel
Je to popsané na stránce firmy Sigmatel:
http://www.sigmatel.com/products/portable/wireless/stir4200.aspx---
Podle
http://tuxmobil.org/ir_misc.html#usb má čip STiR 4200 podporu v jádře od verze kernelu 2.6. a měl bych nainstalovat
http://www.hpl.hp.com/personal/Jean_Tourrilhes/IrDA/ir257_stir4200-1.tgzJak to nainstalovat?
Téma: Jak zprovoznit USB -> IrDA adaptér? (Přečteno 2488 krát)