K3b - cdrecord nemá oprávnění...

[dosmanak]

Zdravíčko, mám nově ntb HP compaq 6910p, s combo CD-ROMkou a nejde mi pálit, nějak nevím pročpak....
Děkuji moc. Dosmaňák

Kód: [Vybrat]

System
-----------------------
K3b Version: 1.0.4

KDE Version: 3.5.9
QT Version:  3.3.8b
Kernel:      2.6.24-19-generic
Devices
-----------------------
MATSHITA UJDA775 DVD/CDRW 1.00 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R96R]

Used versions
-----------------------
cdrecord: 1.1.6

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'MATSHITA'
Identification : 'UJDA775 DVD/CDRW'
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009 (CD-R)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1433600 = 1400 KB
FIFO size      : 12582912 = 12288 KB
Speed set to 4234 KB/s
Track 01: data   197 MB       
Total size:      226 MB (22:26.93) = 101020 sectors
Lout start:      226 MB (22:28/70) = 101020 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11619 (97:27/06)
  ATIP start of lead out: 359847 (79:59/72)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 34
Manufacturer: DIGITAL STORAGE TECHNOLOGY CO.,LTD
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 258827
Starting to write CD/DVD at speed  24.0 in real SAO mode for single session.
Last chance to quit, starting real write in  2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1607 K BSize: 1607 K
Starting new track at sector: 0
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
Track 01:    0 of  197 MB written.
write track data: error after 0 bytes
Writing  time:    7.784s
Average write speed 268.9x.
Fixating...
Fixating time:    0.003s
/usr/bin/wodim: fifo had 191 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
BURN-Free was never needed.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=24 -dao driveropts=burnfree -data -tsize=101020s -



[nettezzaumana]

http://www.google.com/search?client=opera&rls=en&q=Sense+Key:+0x5+Illegal+Request,+Segment+0&sourceid=opera&ie=utf-8&oe=utf-8

[marvec]

ulimit -l 128 mi tento problém vyřešil.