TV Karta AVerMedia AVerTV CardBus Plus

[Miloslav Škrha]

Zdravím.
Na svém notebooku bych rád rozchodil tuto kartu... TV Karta  AVerMedia AVerTV CardBus Plus
Je to karta do PCMCIA slotu. Mám Kubuntu 8.04.
Smažil jsem se prohledávat fórum, ale bohužel z popisů zprovoznění karet nejsem moc moudrej.. :-(
Sem uživatel začátečník, tak prosím nekamenovat za hloupé dotazy.. :-)
Nainstaloval jsem si klikací aplikace TVtime  a Kdetv.
Karta zama od sebe po zasunutí neběží.
Když dám "lscpi" dostanu toto:

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection

ovšem v modprobe -l už SAA7133/SAA7135 nenajdu... je tam pouze:

/lib/modules/2.6.24-19-generic/kernel/drivers/media/video/saa7134/saa7134.ko

Mužete mě prosím nějak polopaticky popsat jak to zprovoznit.. :-)

Moc díky...

Míla

[Bony]

Zdá se, že ji systém poznává. Zkoušel jste MeTV?
http://wiki.ubuntu.cz/Me%20TV

[Miloslav Škrha]

Ano zkoušel.... "žádný tuner nenalezen" píše při spuštění.... 
Ubuntu kartu identifikuje, ale nemá ovladač... Je tam pouze: /lib/modules/2.6.24-19-generic/kernel/drivers/media/video/saa7134/saa7134.ko
Ale díky za snahu :-)

[Bony]

Je o tom rozsáhlá diskuze na:
http://ubuntuforums.org/archive/index.php/t-352196.html
a vypadá to, že to není tak jednoduché...

[Miloslav Škrha]

Děkuju... Ale já a moje Angličtina + dosavadní znalosti Linuxu = výsledek 0 :-(
ještě přikládám výpis po "dmesg" :
[   28.254354] saa7133[0]: subsystem: 1461:f436, board: UNKNOWN/GENERIC [card=0,autodetected]
[   28.254363] saa7133[0]: board init: gpio is 220000
[   28.389621] saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00
[   28.389642] saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   28.389661] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff
[   28.389681] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   28.389701] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[   28.389721] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   28.389740] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   28.389760] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   28.390008] saa7133[0]: dsp access error
[   28.390011] saa7133[0]: dsp access error
[   28.390016] saa7133[0]: dsp access error
[   28.390039] saa7133[0]: registered device video0 [v4l2]
[   28.390060] saa7133[0]: registered device vbi0
[   28.390069] saa7133[0]: dsp access error
[   28.390072] saa7133[0]: dsp access error
[   28.411009] saa7134 ALSA driver for DMA sound loaded
[   28.411034] saa7133[0]/alsa: saa7133[0] at 0xa4000000 irq 19 registered as card -2
[   28.570797] lp0: using parport0 (interrupt-driven).

[Miloslav Škrha]

Tak jsem to rozjel. Až na zvuk v analogu :-(.
Píše mě to po: "sudo saa7134-alsa"

FATAL: Error inserting saa7134_alsa (/lib/modules/2.6.24-19-generic/ubuntu/media/saa7134/saa7134-alsa.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg výpis:

  169.503529] saa7134_alsa: disagrees about version of symbol saa7134_tvaudio_setmute
[  169.503537] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[  169.503694] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[  169.503698] saa7134_alsa: Unknown symbol saa_dsp_writel
[  169.504218] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[  169.504222] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[  169.504366] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[  169.504371] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[  169.504907] saa7134_alsa: disagrees about version of symbol saa7134_set_dmabits
[  169.504911] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[ 2453.299035] saa7134_alsa: disagrees about version of symbol saa7134_tvaudio_setmute
[ 2453.299049] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[ 2453.299378] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[ 2453.299384] saa7134_alsa: Unknown symbol saa_dsp_writel
[ 2453.300490] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[ 2453.300499] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[ 2453.300812] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[ 2453.300818] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[ 2453.301987] saa7134_alsa: disagrees about version of symbol saa7134_set_dmabits
[ 2453.301995] saa7134_alsa: Unknown symbol saa7134_set_dmabits

Nevíte někdo prosím, co s tím?

Jinak návod na zprovoznění karty:

Zapnout root terminál nebo přes sudo...

cd /lib/firmware
wget http://mcentral.de/firmware/firmware_pinnacle.tgz
tar xvzf firmware_pinnacle.tgz
cd /tmp
hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental
cd v4l-dvb-experimental/v4l
make
make install

Potom restartovat PC a karta by měla běžet.
Kdyby se vám nenačetly moduly, je třeba dát ještě:

modprobe tuner
modprobe xc3028_tuner
modprobe mt352
modprobe saa7134-dvb
modprobe saa7134-alsa

U modprobe saa7134-alsa jsem ale já narazil na problém, viz. začátek a nejde zvuk u analogu.

Jinak tam, kde jsem našel tento návod radí toto:

Nainstalovat "sox"
modprobe saa7134-alsa
sox -v 0.05 -c 2 -s -w -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -w -r 32000 /dev/dsp

(to mě ale nejde... )

nx7400 ~ # modprobe saa7134-alsa
FATAL: Error inserting saa7134_alsa (/lib/modules/2.6.24-19-generic/ubuntu/media/saa7134/saa7134-alsa.ko): Unknown symbol in module, or unknown parameter (see dmesg)
nx7400 ~ # sox -v 0.05 -c 2 -s -w -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -w -r 32000 /dev/dsp
sox soxio: Can't open input file `/dev/dsp1': No such file or directory

Odkazy na stránky s návody:
http://mcentral.de/wiki/index.php5/AverMedia_Cardbus_Hybrid_TV_FM_E506R
http://www.abclinuxu.cz/hardware/pridavne-karty/televizni-karty/dvb-t/pcmcia/avertv-hybridpfm-cardbus-e506r
http://www.abclinuxu.cz/poradna/linux/show/113346

[Bum]

Ahoj. Chcem sa spytat, ci sa Ti to podarilo rozbehat. Prave sa rohodujem aku kartu do svojho laptopu kupit. Dik

[Miloslav Škrha]

Bohužel jsem nerozjel zvuk :-(

[Bum]

Len Triafam naslepo.

Toto si skusal?
http://www.abclinuxu.cz/hardware/pridavne-karty/televizni-karty/dvb-t/pcmcia/avertv-hybridpfm-cardbus-e506r

[Bum]

Aha teraz som si vsimol ze hej. Prepac.
Podarilo sa vobec niekomu rozbehat nejak PCMCIA TV kartu k spokojnosti?

[h4wkmoon]

ano, ale nemam moznost chytat DVB, takze pouze ANALOG + ZVUK ! 

kdyz tak sepisu navod na cistou instalaci pod 8.10 x86 , jestli pomuze ...

chtel jsem prihodit screeshot, ale:

Adresář pro přílohy je plný. Zkus menší soubor nebo kontaktuj administrátora.





Bohuzel, v te dobe jsem jeste pouzival xp + visty , takze jsem nevedel jake muzou byt trable s hw, v jedne chvili jsem uvazoval, ze tu kartu prodam a koupim neco vice kompatibilniho s (linuxem) Ubuntu 

[  581.856100] pccard: CardBus card inserted into slot 0
[  581.856166] PCI: 0000:07:00.0 reg 10 32bit mmio: [0, 7ff]
[  581.856259] pci 0000:07:00.0: supports D1
[  581.856263] pci 0000:07:00.0: supports D2
[  582.173642] saa7130/34: v4l2 driver version 0.2.14 loaded
[  582.173721] saa7134 0000:07:00.0: enabling device (0000 -> 0002)
[  582.173733] saa7134 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  582.173746] saa7133[0]: found at 0000:07:00.0, rev: 209, irq: 16, latency: 0, mmio: 0xd8000000
[  582.173761] saa7134 0000:07:00.0: setting latency timer to 64
[  582.173769] saa7133[0]: subsystem: 1461:f436, board: AVerMedia Cardbus TV/Radio (E506R) [card=136,autodetected]
[  582.173785] saa7133[0]: board init: gpio is 220000
[  582.344069] saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00
[  582.344093] saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[  582.344115] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff
[  582.344137] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344158] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[  582.344180] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344202] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344223] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344245] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344266] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344288] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344310] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344331] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344352] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344374] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.344396] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  582.364057] tuner' 3-0061: chip found @ 0xc2 (saa7133[0])
[  582.469210] xc2028 3-0061: creating new instance
[  582.469216] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[  582.469238] firmware: requesting xc3028-v27.fw
[  582.483747] xc2028 3-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[  582.496147] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  591.032118] (0), id 00000000000000ff:
[  591.032125] xc2028 3-0061: Loading firmware for type=(0), id 0000000100000007.
[  591.200122] xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[  591.640899] saa7133[0]: registered device video1 [v4l2]
[  591.641177] saa7133[0]: registered device vbi0
[  591.641445] saa7133[0]: registered device radio0
[  591.721781] saa7134 ALSA driver for DMA sound loaded
[  591.721837] saa7133[0]/alsa: saa7133[0] at 0xd8000000 irq 16 registered as card -2
[  591.808209] xc2028 3-0061: attaching existing instance
[  591.808215] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[  591.808221] DVB: registering new adapter (saa7133[0])
[  591.808227] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[  592.056117] xc2028 3-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[  600.380061] xc2028 3-0061: Loading firmware for type=FM (400), id 0000000000000000.
[  600.773061] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  609.389055] (0), id 00000000000000ff:
[  609.389063] xc2028 3-0061: Loading firmware for type=(0), id 0000000100000007.
[  609.560108] xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.

[rnavatil]

Ja bych prosil o ten navod, jak zprovoznit kartu pod 8.10

[Petr Kopač]

ad zvuk: u podobné karty používám

sox -c 2 -s -w -r 32000 -t alsa hw:1,0 -t alsa -w -r 32000 default

nevim, jestli vám to pomůže. (zdroj: někde jsem to vyhrabal na internetu, už nevím kde)
PS - pokud máte víc zvukových zařízení - např. webkamerka, tv karta - tak je tam potreba zkusit treba hw:2,0