Připojení NTFS - chybí /dev/sda1 a /dev/sda5

[milroe]

Zdravím,

mám problém s připojeni windowského disku s NTFS, vím že na fóru se to řešilo spoustukrát ale tento problém jsem nikde nenašel.
Občas se připojí a občas ne, nevím čím to je, widle ukončuji normalně (vypnout nebo restart).

"sudo fdisk -l" vypíše:


Disk /dev/sda: 60,0 GB, 60 022 480 896 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 7 297
Jednotky = cylindry po 16065 * 512 = 8 225 280 bajtech
Identifikátor disku: 0x05b005af

Zařízení Zavádět   Začátek       Konec    Bloky    Id  Systém
/dev/sda1   *           1        1275    10241406    7  HPFS/NTFS
/dev/sda2            1276        7296    48363682+   f  W95 Rozš. (LBA)
/dev/sda5            1276        7296    48363651    7  HPFS/NTFS

Disk /dev/sdb: 15,0 GB, 15 000 330 240 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 1 823
Jednotky = cylindry po 16065 * 512 = 8 225 280 bajtech
Identifikátor disku: 0x63a0a7fe

Zařízení Zavádět   Začátek       Konec    Bloky    Id  Systém
/dev/sdb1   *           1        1741    13984551   83  Linux
/dev/sdb2            1742        1823      658665    5  Rozšířený
/dev/sdb5            1742        1823      658633+  82  Linux swap/Solaris

ale

"ls /dev/sd*" vypíše:
/dev/sda  /dev/sdb  /dev/sdb1  /dev/sdb2  /dev/sdb5

zkoušel jsem ntfsfix ale ten nepomáhá.

[premet]

Zkoušel sis ten disk dát do /etc/fstab aby se ti připojoval automaticky ?? Podle návodu na wiki to můžeš zkusit pokud již nemáš http://wiki.ubuntu.cz/P%C5%99ipojen%C3%AD%20disku

[milroe]

Bohužel to nepomohlo,

pokud to udělám ručně vypíše se chyba:
ntfs-3g: Failed to access volume '/dev/sda1': No such file or directory
Please type '/sbin/mount.ntfs --help' for more information.


pak jsem si všiml že při startování systém se vypisují nějaké chybu (syslog)

Sep  8 20:19:49 milhouse kernel: [   31.018129] ata1.01: BMDMA stat 0x64
Sep  8 20:19:49 milhouse kernel: [   31.018154] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
Sep  8 20:19:49 milhouse kernel: [   31.018158]          res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
Sep  8 20:19:49 milhouse kernel: [   31.018166] ata1.01: status: { DRDY ERR }
Sep  8 20:19:49 milhouse kernel: [   31.018172] ata1.01: error: { ICRC ABRT }
Sep  8 20:19:49 milhouse kernel: [   31.018225] ata1: soft resetting link
Sep  8 20:19:49 milhouse kernel: [   31.203955] ata1.00: configured for UDMA/33
Sep  8 20:19:49 milhouse kernel: [   31.219290] ata1.01: configured for UDMA/100
Sep  8 20:19:49 milhouse kernel: [   31.219330] ata1: EH complete
Sep  8 20:19:49 milhouse kernel: [   31.249210] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Sep  8 20:19:49 milhouse kernel: [   31.249224] ata1.01: BMDMA stat 0x64
Sep  8 20:19:49 milhouse kernel: [   31.249241] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
Sep  8 20:19:49 milhouse kernel: [   31.249245]          res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
Sep  8 20:19:49 milhouse kernel: [   31.249253] ata1.01: status: { DRDY ERR }
Sep  8 20:19:49 milhouse kernel: [   31.249258] ata1.01: error: { ICRC ABRT }
Sep  8 20:19:49 milhouse kernel: [   31.249309] ata1: soft resetting link
Sep  8 20:19:49 milhouse kernel: [   31.435835] ata1.00: configured for UDMA/33
Sep  8 20:19:49 milhouse kernel: [   31.451151] ata1.01: configured for UDMA/100
Sep  8 20:19:49 milhouse kernel: [   31.451193] ata1: EH complete
Sep  8 20:19:49 milhouse kernel: [   31.451346] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
Sep  8 20:19:49 milhouse kernel: [   31.480362] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Sep  8 20:19:49 milhouse kernel: [   31.480380] ata1.01: BMDMA stat 0x64
Sep  8 20:19:49 milhouse kernel: [   31.480398] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
Sep  8 20:19:49 milhouse kernel: [   31.480402]          res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
Sep  8 20:19:49 milhouse kernel: [   31.480411] ata1.01: status: { DRDY ERR }
Sep  8 20:19:49 milhouse kernel: [   31.480416] ata1.01: error: { ICRC ABRT }
Sep  8 20:19:49 milhouse kernel: [   31.480468] ata1: soft resetting link
Sep  8 20:19:49 milhouse kernel: [   31.668117] ata1.00: configured for UDMA/33
Sep  8 20:19:49 milhouse kernel: [   31.683135] ata1.01: configured for UDMA/100
Sep  8 20:19:49 milhouse kernel: [   31.683188] ata1: EH complete
Sep  8 20:19:49 milhouse kernel: [   31.683349] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 20:19:49 milhouse kernel: [   31.683357] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 20:19:49 milhouse kernel: [   31.711490] ata1.01: limiting speed to UDMA/66:PIO4
Sep  8 20:19:49 milhouse kernel: [   31.711510] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Sep  8 20:19:49 milhouse kernel: [   31.711520] ata1.01: BMDMA stat 0x64
Sep  8 20:19:49 milhouse kernel: [   31.711536] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
Sep  8 20:19:49 milhouse kernel: [   31.711540]          res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
Sep  8 20:19:49 milhouse kernel: [   31.711548] ata1.01: status: { DRDY ERR }
Sep  8 20:19:49 milhouse kernel: [   31.711553] ata1.01: error: { ICRC ABRT }
Sep  8 20:19:49 milhouse kernel: [   31.711605] ata1: soft resetting link
Sep  8 20:19:49 milhouse kernel: [   31.899508] ata1.00: configured for UDMA/33
Sep  8 20:19:49 milhouse kernel: [   31.914798] ata1.01: configured for UDMA/66
Sep  8 20:19:49 milhouse kernel: [   31.914846] ata1: EH complete
.
.
.
Sep  8 21:35:02 milhouse kernel: [   28.026958] Driver 'sd' needs updating - please use bus_type methods
Sep  8 21:35:02 milhouse kernel: [   28.027228] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
Sep  8 21:35:02 milhouse kernel: [   28.027265] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 21:35:02 milhouse kernel: [   28.027272] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 21:35:02 milhouse kernel: [   28.027316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 21:35:02 milhouse kernel: [   28.027458] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
Sep  8 21:35:02 milhouse kernel: [   28.027484] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 21:35:02 milhouse kernel: [   28.027490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 21:35:02 milhouse kernel: [   28.027525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 21:35:02 milhouse kernel: [   28.027538]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
Sep  8 21:35:02 milhouse kernel: [   28.046035] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Sep  8 21:35:02 milhouse kernel: [   28.046109] ata1.00: BMDMA stat 0x64
Sep  8 21:35:02 milhouse kernel: [   28.046166] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  8 21:35:02 milhouse kernel: [   28.046170]          res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
Sep  8 21:35:02 milhouse kernel: [   28.046225] ata1.00: status: { DRDY ERR }
Sep  8 21:35:02 milhouse kernel: [   28.046271] ata1.00: error: { ICRC ABRT }
Sep  8 21:35:02 milhouse kernel: [   28.046362] ata1: soft resetting link
Sep  8 21:35:02 milhouse kernel: [   28.205905] usbcore: registered new interface driver hiddev
Sep  8 21:35:02 milhouse kernel: [   28.221510] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
Sep  8 21:35:02 milhouse kernel: [   28.230940] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:01.2-1
Sep  8 21:35:02 milhouse kernel: [   28.231000] usbcore: registered new interface driver usbhid
Sep  8 21:35:02 milhouse kernel: [   28.231011] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Sep  8 21:35:02 milhouse kernel: [   28.231998] ata1.00: configured for UDMA/100
Sep  8 21:35:02 milhouse kernel: [   28.247807] ata1.01: configured for UDMA/100
Sep  8 21:35:02 milhouse kernel: [   28.247869] ata1: EH complete
Sep  8 21:35:02 milhouse kernel: [   28.256437] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Sep  8 21:35:02 milhouse kernel: [   28.256510] ata1.00: BMDMA stat 0x64
Sep  8 21:35:02 milhouse kernel: [   28.256567] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  8 21:35:02 milhouse kernel: [   28.256571]          res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
Sep  8 21:35:02 milhouse kernel: [   28.256627] ata1.00: status: { DRDY ERR }
Sep  8 21:35:02 milhouse kernel: [   28.256671] ata1.00: error: { ICRC ABRT }
Sep  8 21:35:02 milhouse kernel: [   28.256763] ata1: soft resetting link
Sep  8 21:35:02 milhouse kernel: [   28.443632] ata1.00: configured for UDMA/100
Sep  8 21:35:02 milhouse kernel: [   28.458665] ata1.01: configured for UDMA/100
Sep  8 21:35:02 milhouse kernel: [   28.458716] ata1: EH complete
Sep  8 21:35:02 milhouse kernel: [   28.466828] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Sep  8 21:35:02 milhouse kernel: [   28.466901] ata1.00: BMDMA stat 0x64
Sep  8 21:35:02 milhouse kernel: [   28.466956] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  8 21:35:02 milhouse kernel: [   28.466960]          res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
Sep  8 21:35:02 milhouse kernel: [   28.467015] ata1.00: status: { DRDY ERR }
Sep  8 21:35:02 milhouse kernel: [   28.467060] ata1.00: error: { ICRC ABRT }
Sep  8 21:35:02 milhouse kernel: [   28.467152] ata1: soft resetting link
Sep  8 21:35:02 milhouse kernel: [   28.655477] ata1.00: configured for UDMA/100
Sep  8 21:35:02 milhouse kernel: [   28.670497] ata1.01: configured for UDMA/100
Sep  8 21:35:02 milhouse kernel: [   28.670547] ata1: EH complete
Sep  8 21:35:02 milhouse kernel: [   28.677149] ata1.00: limiting speed to UDMA/66:PIO4
Sep  8 21:35:02 milhouse kernel: [   28.677169] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Sep  8 21:35:02 milhouse kernel: [   28.677233] ata1.00: BMDMA stat 0x64
Sep  8 21:35:02 milhouse kernel: [   28.677290] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  8 21:35:02 milhouse kernel: [   28.677293]          res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
Sep  8 21:35:02 milhouse kernel: [   28.677363] ata1.00: status: { DRDY ERR }
Sep  8 21:35:02 milhouse kernel: [   28.677415] ata1.00: error: { ICRC ABRT }



V syslogu se to vyskytuje několikrát.

Miloš

[milroe]

tak pravděpodobně se mi to povedlo vyřešit, nainstaloval jsem si novější kernel http://packages.ubuntu.com/intrepid/i386/linux-image-2.6.27-2-generic/download restartoval jsem disk se připojil.