Skype mi restartuje X

[david]

Zdravím, když pustím Sype, tak zničeho nic hned restartuje X, jediné co se ukáže na 1 vteřinu je tohle (viz. obrázek)
a hned mi to najede do přihlášení.

http://www.blueto.cz/sklad/skype.gif
Mám 8.04 a dříve mi to normálně chodilo.

Dík za radu

David

[Tomáš Pikálek]

Zkuste ho odstranit včetně nastavení:
sudo apt-get purge skype*
Pokud dám nevadí ztráta uživatelského nastavení, smažte je:
rm -rf ~/.Skype
A nakonec znovu nainstalujte.
sudo apt-get install skype

[david]

Zkusil jsem to,ale nějak to nepomohlo.

I Tak dík.

David

[Martin 'Želva' Malý]

Jakou mátre grafickou kartu a jaké používáte ovladače, popřípadě sem hoďte výpisy příkazů:

cat /etc/X11/xorg.conf
lspci

[david]

Zdravím, tady pár výpisů:

Xorg.0.log.old po pádu poslední řádky :

Kód: [Vybrat]

II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom General ISDV4 tablet speed=9600 maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540  tilt=disabled
(EE) eraser: Top/Bottom area overlaps with another devices.
(EE) stylus: Top/Bottom area overlaps with another devices.
(EE) cursor: Top/Bottom area overlaps with another devices.
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432
(==) Wacom device "cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(--) Synaptics Touchpad touchpad found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!

Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80c780e]
1: [0xb7f03420]
2: /usr/lib/xorg/modules/input//wacom_drv.so [0xb7abc8ca]
3: /usr/bin/X(ActivateDevice+0x40) [0x8085860]
4: /usr/bin/X(OpenInputDevice+0x24) [0x80e4b54]
5: /usr/bin/X(ProcXOpenDevice+0x98) [0x817af38]
6: /usr/bin/X [0x817755a]
7: /usr/bin/X [0x81506ee]
8: /usr/bin/X(Dispatch+0x2cf) [0x808d8df]
9: /usr/bin/X(main+0x48b) [0x807471b]
10: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb7c96450]
11: /usr/bin/X(FontFileCompleteXLFD+0x201) [0x8073a91]

Fatal server error:
Caught signal 11.  Server aborting

(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) I810(0): Successfully set original devices
(II) I810(0): xf86UnbindGARTMemory: unbind key 7
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGARTMemory: unbind key 3
(II) I810(0): xf86UnbindGARTMemory: unbind key 2
(II) I810(0): xf86UnbindGARTMemory: unbind key 4
(II) I810(0): xf86UnbindGARTMemory: unbind key 5
(II) I810(0): xf86UnbindGARTMemory: unbind key 6
(WW) I810(0): Successfully set original devices (2)
Xorg.conf :

Kód: [Vybrat]

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load    "wacom"                 
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz(qwerty),us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/ttyS0"
        Option          "ForceDevice"   "ISDV4"
        Option          "Type"          "cursor"
        Option          "Mode"          "absolute"
        Option          "Speed"         "3.0"
        Option          "Threshold"     "2"
#       Option          "DebugLevel"    "10"
#       Option          "MaxX"          "24576"
#       Option          "MaxY"          "18432"
EndSection
Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/ttyS0"
        Option          "Type"          "stylus"
        Option          "Mode"          "absolute"
#       Option          "Tilt"          "on"
#       Option          "TiltInvert"    "on"
        Option          "Threshold"     "2"
#       Option          "DebugLevel"    "10"
EndSection
Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/ttyS0"
        Option          "Type"          "eraser"
        Option          "Mode"          "absolute"
#       Option          "Tilt"          "on"
#       Option          "TiltInvert"    "on"
        Option          "Threshold"     "2"
#       Option          "DebugLevel"    "10"
EndSection

Section "Device"
       Identifier       "Device Interni"
       Driver           "i810"
       BusID            "PCI:0:2:0"
       Option           "MonitorLayout" "NONE,LFP"
       #VideoRam        131072 #pro 128MB Video Ram jen nove karty
       VideoRam 65536 #pro 64MB Video Ram
Option "VBERestore" "yes"
EndSection

Section "Device"
       Identifier       "Device Externi"
       Driver           "i810"
       BusID            "PCI:0:2:0"
       Option           "MonitorLayout" "NONE,CRT"
       #VideoRam        131072 #pro 128MB Video Ram jen nove karty
       VideoRam 65536 #pro 64MB Video Ram
Option "VBERestore" "yes"
EndSection

Section "Device"
       Identifier       "Device Interni Dual"
       Driver           "i810"
       BusID            "PCI:0:2:0"
       Option           "MonitorLayout" "CRT,LFP"
       Screen           0
EndSection

Section "Device"
       Identifier       "Device Externi Dual"
       Driver           "i810"
       BusID            "PCI:0:2:0"
       Screen           1
EndSection

Section "Monitor"
        Identifier      "Interni Monitor"
        Option          "DPMS"
EndSection

Section "Monitor"
        Identifier      "Externi Monitor"
        Option          "DPMS"
        HorizSync       30.0 - 81.0
        VertRefresh     56.0 - 75.0
EndSection

Section "Screen"
       Identifier      "Screen Externi"
       Device          "Device Externi"
       Monitor         "Externi Monitor"
       DefaultDepth    24
       SubSection "Display"
               Depth   16
               Modes   "1280x1024" "1024x768"
       EndSubSection
       SubSection "Display"
               Depth   24
               Modes   "1280x1024" "1024x768"
       EndSubSection
EndSection

Section "Screen"
       Identifier      "Screen Interni"
       Device          "Device Interni"
       Monitor         "Interni Monitor"
       DefaultDepth    24
       SubSection "Display"
               Depth   16
               Modes   "1024x768"
       EndSubSection
       SubSection "Display"
               Depth   24
               Modes   "1024x768"
       EndSubSection
EndSection

Section "Screen"
       Identifier      "Screen Externi Dual"
       Device          "Device Externi Dual"
       Monitor         "Externi Monitor"
       DefaultDepth    24
       SubSection "Display"
               Depth   16
               Modes   "1280x1024" "1024x768"
       EndSubSection
       SubSection "Display"
               Depth   24
               Modes   "1280x1024" "1024x768"
       EndSubSection
EndSection

Section "Screen"
       Identifier      "Screen Interni Dual"
       Device          "Device Interni Dual"
       Monitor         "Interni Monitor"
       DefaultDepth    24
       SubSection "Display"
               Depth   16
               Modes   "1024x768"
       EndSubSection
       SubSection "Display"
               Depth   24
               Modes   "1024x768"
       EndSubSection
EndSection


Section "ServerLayout"
Identifier      "Dual"
        Screen          0 "Screen Interni Dual"
        Screen          1 "Screen Externi Dual" LeftOf "Screen Interni Dual"
#       Screen          1 "Screen Externi Dual" RightOf "Screen Interni Dual"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
# TabletPC Pen Device
        InputDevice     "cursor"        "SendCoreEvents"
        InputDevice     "stylus"        "SendCoreEvents"
        InputDevice     "eraser"        "SendCoreEvents"
EndSection

Section "ServerLayout"
Identifier      "Externi"
        Screen          "Screen Externi"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
# TabletPC Pen Device
        InputDevice     "cursor"        "SendCoreEvents"
        InputDevice     "stylus"        "SendCoreEvents"
        InputDevice     "eraser"        "SendCoreEvents"
EndSection

Section "ServerLayout"
Identifier      "Interni"
        Screen          "Screen Interni"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
# TabletPC Pen Device
        InputDevice     "cursor"        "SendCoreEvents"
        InputDevice     "stylus"        "SendCoreEvents"
        InputDevice     "eraser"        "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

# Zde zacina sekce pro specialni volby pro cele xka,
# v nasem pripade urcujeme s jakym nastavenim ze vsech
# definovanych maji nakonec xka nabehnout
Section "ServerFlags"
        Option         "DefaultServerLayout" "Interni"
        #Option          "DefaultServerLayout" "Externi"
        #Option         "DefaultServerLayout" "Dual"
EndSection
# Zde konci sekce pro specialni volby pro cele xka
lspci :

Kód: [Vybrat]

00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:0a.0 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller
01:0a.1 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller
01:0a.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
01:0a.3 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller
01:0c.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)
01:0d.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)

Příště prosím výpisy do kódu, děkuji.

[Martin 'Želva' Malý]

Já se nic moc v logách eorientuju, ale co vidím, máte Inteláckou grafinu. Jak jste ji instaloval?

[david]

Standardní instalace, lépe řečeno si to Ubuntu instalovalo samo. Podotýkám, že PC mám od 6.04, šel jsem upgrady přes 6.10,7.04,7.10 a problém nikdy nebyl.

[truhlik]

Jeste zkuste pustit skype prez terminal a poslat co to vypise.

[david]

Jo zkusil jsem to a nedalo to žádnou hlášku, prostě se resratovaly Xka a naběhne to do přihlášení.

[Martin 'Želva' Malý]

Zkuste to spustit takhle:

skype > /home/david/x_error

[david]

bohužel, cat x_er nic nevyhodil

spoštěl jsem to :

skype 2> x_er
skype >  x_er

[david]

Tak už to jede, dík všem za pomoc.

Řešení je v tom najít hlášku v /var/log/Xorg.0.log.old
tam je info Server failet caught signal 11.

následně je potřeba dpkg-reconfigure xserver-xorg (nalezone pomocí Google)
a už to jede.

Ještě jednou dík všem za ochotu.

David