Problém s wifi Atheros [vyřešeno]

[Mikec]

Zdravím,

Předem mého dotazu bych chtěl předeslat, že toto fórum i wiki jsem pročetl poměrně počlivě a vyzkoušel jsem snad vše, co jsem kde našel.

Vlastním notebook ACER Aspire 5100 s wifi kartou Atheros AR242x (vím, že na toto téma je tu toho nespočet a je pro to dokonce i ve wikipedii místo, ale jak jsem již předeslal, nic mi nepomohlo). Zkoušel jsem instalaci windowsových ovladačů pomocí ndiswrapperu (a to jak v grafické verzi, tak i v terminálu), zkoušel jsem instalaci přes madwifi (několik verzí, několik návodů z českých i zahraničních fór), a pořád nic. Můj předpoklad je, že jsem udělal nějakou hloupost někde na začátku, ale vzhledem k mé nezkušenosti s pro mě novým systémem (který se mi mimochodem moc líbí) jsem prostě nic nezaznamenal.

Pro doplnění mého dotazu přidávám ještě několik výstupů z terminálu (Následující příkazy jsem nalezl u jiného z témat...):

příkaz lshw

Kód: [Vybrat]

mike@Notas:~$ lshw
WARNING: you should run this program as super-user.
notas                    
    description: Computer
    width: 32 bits
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 0
          size: 1009MiB
     *-cpu
          product: AMD Turion(tm) 64 X2 Mobile Technology TL-52
          vendor: Advanced Micro Devices [AMD]
          physical id: 1
          bus info: cpu@0
          version: 15.8.2
          size: 1600MHz
          capacity: 1600MHz
          width: 64 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy ts fid vid ttp tm stc cpufreq
        *-cache:0
             description: L1 cache
             physical id: 0
             size: 128KiB
        *-cache:1
             description: L2 cache
             physical id: 1
             size: 512KiB
     *-pci:0
          description: Host bridge
          product: RS480 Host Bridge
          vendor: ATI Technologies Inc
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 10
          width: 32 bits
          clock: 66MHz
          configuration: latency=64
        *-pci:0
             description: PCI bridge
             product: RS480 PCI-X Root Port
             vendor: ATI Technologies Inc
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-display UNCLAIMED
                description: VGA compatible controller
                product: M52 [Mobility Radeon X1300]
                vendor: ATI Technologies Inc
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: vga_controller bus_master cap_list
                configuration: latency=0
        *-pci:1
             description: PCI bridge
             product: RS480 PCI Bridge
             vendor: ATI Technologies Inc
             physical id: 4
             bus info: pci@0000:00:04.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-pci:2
             description: PCI bridge
             product: RS480 PCI Bridge
             vendor: ATI Technologies Inc
             physical id: 5
             bus info: pci@0000:00:05.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-network
                description: Ethernet controller
                product: AR242x 802.11abg Wireless PCI Express Adapter
                vendor: Atheros Communications Inc.
                physical id: 0
                bus info: pci@0000:04:00.0
                version: 01
                width: 64 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=ndiswrapper latency=0 module=ndiswrapper
        *-ide:0
             description: IDE interface
             product: IXP SB400 Serial ATA Controller
             vendor: ATI Technologies Inc
             physical id: 12
             bus info: pci@0000:00:12.0
             version: 80
             width: 32 bits
             clock: 66MHz
             capabilities: ide bus_master cap_list
             configuration: driver=sata_sil latency=64 module=sata_sil
        *-usb:0
             description: USB Controller
             product: IXP SB400 USB Host Controller
             vendor: ATI Technologies Inc
             physical id: 13
             bus info: pci@0000:00:13.0
             version: 80
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci_hcd latency=64 module=ohci_hcd
        *-usb:1
             description: USB Controller
             product: IXP SB400 USB Host Controller
             vendor: ATI Technologies Inc
             physical id: 13.1
             bus info: pci@0000:00:13.1
             version: 80
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci_hcd latency=64 module=ohci_hcd
        *-usb:2
             description: USB Controller
             product: IXP SB400 USB2 Host Controller
             vendor: ATI Technologies Inc
             physical id: 13.2
             bus info: pci@0000:00:13.2
             version: 80
             width: 32 bits
             clock: 66MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=64 module=ehci_hcd
        *-serial
             description: SMBus
             product: IXP SB400 SMBus Controller
             vendor: ATI Technologies Inc
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 83
             width: 32 bits
             clock: 66MHz
             capabilities: cap_list
             configuration: driver=piix4_smbus latency=0 module=i2c_piix4
        *-ide:1
             description: IDE interface
             product: IXP SB400 IDE Controller
             vendor: ATI Technologies Inc
             physical id: 14.1
             bus info: pci@0000:00:14.1
             version: 80
             width: 32 bits
             clock: 66MHz
             capabilities: ide bus_master cap_list
             configuration: driver=pata_atiixp latency=64 module=pata_atiixp
        *-multimedia
             description: Audio device
             product: IXP SB4x0 High Definition Audio Controller
             vendor: ATI Technologies Inc
             physical id: 14.2
             bus info: pci@0000:00:14.2
             version: 01
             width: 64 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=HDA Intel latency=64 module=snd_hda_intel
        *-isa
             description: ISA bridge
             product: IXP SB400 PCI-ISA Bridge
             vendor: ATI Technologies Inc
             physical id: 14.3
             bus info: pci@0000:00:14.3
             version: 80
             width: 32 bits
             clock: 66MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-pci:3
             description: PCI bridge
             product: IXP SB400 PCI-PCI Bridge
             vendor: ATI Technologies Inc
             physical id: 14.4
             bus info: pci@0000:00:14.4
             version: 80
             width: 32 bits
             clock: 66MHz
             capabilities: pci subtractive_decode bus_master
           *-network
                description: Ethernet interface
                product: RTL-8139/8139C/8139C+
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 1
                bus info: pci@0000:06:01.0
                logical name: eth0
                version: 10
                serial: 00:16:d4:ce:51:fa
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list ethernet physical
                configuration: broadcast=yes driver=8139too driverversion=0.9.28 ip=192.168.1.100 latency=64 maxlatency=64 mingnt=32 module=8139too multicast=yes
           *-pcmcia
                description: CardBus bridge
                product: CB-712/4 Cardbus Controller
                vendor: ENE Technology Inc
                physical id: 4
                bus info: pci@0000:06:04.0
                version: 10
                width: 32 bits
                clock: 33MHz
                capabilities: pcmcia bus_master cap_list
                configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 module=yenta_socket
           *-memory:0 UNCLAIMED
                description: FLASH memory
                product: ENE PCI Memory Stick Card Reader Controller
                vendor: ENE Technology Inc
                physical id: 4.1
                bus info: pci@0000:06:04.1
                version: 01
                width: 32 bits
                clock: 33MHz (30.3ns)
                capabilities: bus_master cap_list
                configuration: latency=64 maxlatency=4 mingnt=1
           *-system
                description: SD Host controller
                product: ENE PCI Secure Digital Card Reader Controller
                vendor: ENE Technology Inc
                physical id: 4.2
                bus info: pci@0000:06:04.2
                version: 01
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=sdhci latency=64 maxlatency=72 mingnt=32 module=sdhci
           *-memory:1 UNCLAIMED
                description: FLASH memory
                product: FLASH memory: ENE Technology Inc:
                vendor: ENE Technology Inc
                physical id: 4.3
                bus info: pci@0000:06:04.3
                version: 01
                width: 32 bits
                clock: 33MHz (30.3ns)
                capabilities: bus_master cap_list
                configuration: latency=64 maxlatency=4 mingnt=1
           *-memory:2
                description: FLASH memory
                product: SD/MMC Card Reader Controller
                vendor: ENE Technology Inc
                physical id: 4.4
                bus info: pci@0000:06:04.4
                version: 01
                width: 32 bits
                clock: 33MHz (30.3ns)
                capabilities: cap_list
                configuration: driver=sdhci latency=0 maxlatency=72 mingnt=32 module=sdhci
     *-pci:1
          description: Host bridge
          product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
          vendor: Advanced Micro Devices [AMD]
          physical id: 101
          bus info: pci@0000:00:18.0
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:2
          description: Host bridge
          product: K8 [Athlon64/Opteron] Address Map
          vendor: Advanced Micro Devices [AMD]
          physical id: 102
          bus info: pci@0000:00:18.1
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:3
          description: Host bridge
          product: K8 [Athlon64/Opteron] DRAM Controller
          vendor: Advanced Micro Devices [AMD]
          physical id: 103
          bus info: pci@0000:00:18.2
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:4
          description: Host bridge
          product: K8 [Athlon64/Opteron] Miscellaneous Control
          vendor: Advanced Micro Devices [AMD]
          physical id: 104
          bus info: pci@0000:00:18.3
          version: 00
          width: 32 bits
          clock: 33MHz
          configuration: driver=k8temp module=k8temp

Příkaz lspci --vn

Kód: [Vybrat]

mike@Notas:~$ lspci --vn
lspci: invalid option -- -
Usage: lspci [<switches>]

-v Be verbose
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-b Bus-centric view (PCI addresses and IRQ's instead of those seen by the CPU)
-x Show hex-dump of the standard portion of config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only selected devices
-t Show bus tree
-m Produce machine-readable output
-i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz
-D Always show domain numbers
-M Enable `bus mapping' mode (dangerous; root only)
-P <dir> Use specified directory instead of /proc/bus/pci
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read configuration data from given file
-G Enable PCI access debugging

Příkaz ifconfig:

Kód: [Vybrat]

mike@Notas:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:16:d4:ce:51:fa  
          inet addr:192.168.1.100  Bcast:255.255.255.255  Mask:255.255.255.0
          inet6 addr: fe80::216:d4ff:fece:51fa/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2617 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2515 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2766538 (2.6 MB)  TX bytes:403584 (394.1 KB)
          Interrupt:19 Base address:0xa000

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:128 errors:0 dropped:0 overruns:0 frame:0
          TX packets:128 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6400 (6.2 KB)  TX bytes:6400 (6.2 KB)

Příkaz iwconfig:

Kód: [Vybrat]

mike@Notas:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.
Možná, že mě ted mnozí budou proklínat, že sem vůbec něco takového píšu, že je to tu popsané milionkrát, ale jak jsem již zmínil - vyzkoušel jsem všechno možné, co jsem kde nalezl.

Předem děkuji všem, kteří se mi alespoň pokusí pomoci:-)

Pokud by pomohlo, kdybych připojil více informací, rád tak učiním

[truhlik]

1) Hodte sem jeste

Kód: [Vybrat]

lspci -v
dmesg
Koukam ze tam mate nahozenej ndiswrapper. Tak jeste:

Kód: [Vybrat]

lsmod | grep ndis
sudo ifconfig ath0 up
2) Doporucuji projit par temat:
http://forum.ubuntu.cz/index.php/topic,22858.0.html
http://forum.ubuntu.cz/index.php?topic=27397.0

3) Zkusil bych postupovat podle nejakeho navodu, bud ve vyse zminenych tematech, pripadne jinich na foru,googlu atd. a pak sem poslat cely postup jak si to delal co to vypisovalo atd. proste komplet. Zvlaste bych se zameril na postup uvedeny na wiki se stazenim ovladacu primo ze stranek atherosu.

http://wiki.ubuntu.cz/Atheros%20AR5007EG
http://www.atheros.cz/

[Mikec]

Návody, které mi zde doporučujete jsem projel řekněme několikrát a potvůrka pořád zlobí...

Dle návodu a wiki (který jste sem i předložil):

Nejprve jsem si stáhl z snapshots.madwifi.org/madwifi-hal-0.10.5.6/ nejnovější archiv (těch archivů jsem vyzkoušel víc...), uložil do Home directory a následně rozbalil v terminálu příkazem tar -xvzf. Vše proběhlo v pořádku. Poté jsem se pousil nainstalovat balík buid-essential, kde mi to ovšem napsalo build-essential je již nejnovější verze.. V terminálu jsem se pomocí cd dostal do zprávného adresáře, kde jsem poté použil následnovně příkazy make clean, make, sudo make install. Všechny příkazy mi proběhly úspěšně. To soudím z faktu, že se nikde nevypsala žádná chyba (Pokud bude třeba, předložím sem i výpis z terminálu). Počítač jsem restartoval a co čert nechtěl, stále a opět bezdrátové připojení nefunguje!

Doplňuji další výpisy z terminálu, příkaz lspci -v:

Kód: [Vybrat]

mike@Notas:~$ lspci -v
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, 66MHz, medium devsel, latency 64

00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Capabilities: <access denied>

00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Capabilities: <access denied>

00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Memory behind bridge: c0200000-c02fffff
Capabilities: <access denied>

00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ATI Technologies Inc IXP SB400 Serial ATA Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
I/O ports at 8440 [size=8]
I/O ports at 8434 [size=4]
I/O ports at 8438 [size=8]
I/O ports at 8430 [size=4]
I/O ports at 8400 [size=16]
Memory at c0004000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 50000000 [disabled] [size=512K]
Capabilities: <access denied>

00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at c0005000 (32-bit, non-prefetchable) [size=4K]

00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at c0006000 (32-bit, non-prefetchable) [size=4K]

00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>

00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: 66MHz, medium devsel
I/O ports at 8410 [size=16]
Memory at 50080000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) (prog-if 82 [Master PriP])
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 8420 [size=16]
Capabilities: <access denied>

00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, slow devsel, latency 64, IRQ 18
Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0300000-c03fffff

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities: <access denied>

01:00.0 VGA compatible controller: ATI Technologies Inc M52 [Mobility Radeon X1300] (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at c8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>

04:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
Subsystem: AMBIT Microsystem Corp. Unknown device 0428
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at c0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, medium devsel, latency 64, IRQ 20
I/O ports at a000 [size=256]
Memory at c0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, medium devsel, latency 168, IRQ 16
Memory at c0301000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
Memory window 0: 54000000-57fff000 (prefetchable)
Memory window 1: 58000000-5bfff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
16-bit legacy interface ports at 0001

06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at c0300400 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>

06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at c0300800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at c0300c00 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>

06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 009f
Flags: medium devsel, IRQ 22
Memory at c0300100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

Příkaz dmesg:

Kód: [Vybrat]

[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:8 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:8 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[    0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[    0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259731
[    0.000000] Kernel command line: root=UUID=9a109de6-a564-4a2f-8c6c-5086079f25a8 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1596.033 MHz processor.
[   12.457609] Console: colour VGA+ 80x25
[   12.457613] console [tty0] enabled
[   12.457987] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   12.458443] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.485618] Memory: 1025952k/1047104k available (2177k kernel code, 20492k reserved, 1006k data, 368k init, 129600k highmem)
[   12.485628] virtual kernel memory layout:
[   12.485629]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   12.485630]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   12.485632]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   12.485633]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   12.485635]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   12.485636]       .data : 0xc0320514 - 0xc041bdc4   (1006 kB)
[   12.485637]       .text : 0xc0100000 - 0xc0320514   (2177 kB)
[   12.485641] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   12.485682] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   12.565638] Calibrating delay using timer specific routine.. 3195.41 BogoMIPS (lpj=6390829)
[   12.565669] Security Framework initialized
[   12.565676] SELinux:  Disabled at boot.
[   12.565692] AppArmor: AppArmor initialized
[   12.565696] Failure registering capabilities with primary security module.
[   12.565706] Mount-cache hash table entries: 512
[   12.565834] Initializing cgroup subsys ns
[   12.565838] Initializing cgroup subsys cpuacct
[   12.565849] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[   12.565859] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   12.565862] CPU: L2 Cache: 512K (64 bytes/line)
[   12.565865] CPU 0(2) -> Core 0
[   12.565868] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410 00002001 00000000 0000001f 00000000
[   12.565879] Compat vDSO mapped to ffffe000.
[   12.565890] Checking 'hlt' instruction... OK.
[   12.581954] SMP alternatives: switching to UP code
[   12.583374] Early unpacking initramfs... done
[   12.968114] ACPI: Core revision 20070126
[   12.968215] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   13.381298] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[   13.381318] SMP alternatives: switching to SMP code
[   13.381853] Booting processor 1/1 eip 3000
[   13.392329] Initializing CPU#1
[   13.469322] Calibrating delay using timer specific routine.. 3192.27 BogoMIPS (lpj=6384548)
[   13.469330] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[   13.469338] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   13.469340] CPU: L2 Cache: 512K (64 bytes/line)
[   13.469343] CPU 1(2) -> Core 1
[   13.469345] AMD C1E detected late. Force timer broadcast.
[   13.469346] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410 00002001 00000000 0000001f 00000000
[   13.469015] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[   13.469031] Total of 2 processors activated (6387.68 BogoMIPS).
[   13.469199] ENABLING IO-APIC IRQs
[   13.469382] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   13.509211] Brought up 2 CPUs
[   13.509240] CPU0 attaching sched-domain:
[   13.509243]  domain 0: span 03
[   13.509245]   groups: 01 02
[   13.509249] CPU1 attaching sched-domain:
[   13.509251]  domain 0: span 03
[   13.509253]   groups: 02 01
[   13.509477] net_namespace: 64 bytes
[   13.509485] Booting paravirtualized kernel on bare hardware
[   13.510010] Time:  7:16:30  Date: 10/16/08
[   13.510039] NET: Registered protocol family 16
[   13.510252] EISA bus registered
[   13.510256] ACPI: bus type pci registered
[   13.521219] PCI: BIOS BUG #81[49435000] found
[   13.521271] PCI: Using configuration type 1
[   13.521281] Setting up standard PCI resources
[   13.523430] ACPI: EC: Look up EC in DSDT
[   13.527071] ACPI: BIOS _OSI(Linux) query ignored via DMI
[   13.527074] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[   13.545264] ACPI: Interpreter enabled
[   13.545266] ACPI: (supports S0 S3 S4 S5)
[   13.545280] ACPI: Using IOAPIC for interrupt routing
[   13.551625] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   13.623093] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[   13.623096] ACPI: EC: driver started in interrupt mode
[   13.623141] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   13.624952] PCI: Transparent bridge - 0000:00:14.4
[   13.625039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   13.625228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[   13.625371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[   13.625522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT]
[   13.625664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[   13.625819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   13.625979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[   13.631085] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[   13.631245] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[   13.631401] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[   13.631557] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[   13.631712] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[   13.631867] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[   13.632023] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[   13.632179] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[   13.632335] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[   13.632480] Linux Plug and Play Support v0.97 (c) Adam Belay
[   13.632518] pnp: PnP ACPI init
[   13.632525] ACPI: bus type pnp registered
[   13.673712] pnp: PnP ACPI: found 10 devices
[   13.673715] ACPI: ACPI bus type pnp unregistered
[   13.673718] PnPBIOS: Disabled by ACPI PNP
[   13.673974] PCI: Using ACPI for IRQ routing
[   13.673976] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   13.673983] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[   13.673986] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[   13.673989] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
[   13.685440] NET: Registered protocol family 8
[   13.685443] NET: Registered protocol family 20
[   13.685515] AppArmor: AppArmor Filesystem Enabled
[   13.701456] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   13.701460] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[   13.701463] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[   13.701472] system 00:08: ioport range 0x1080-0x1080 has been reserved
[   13.701475] system 00:08: ioport range 0x40b-0x40b has been reserved
[   13.701478] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   13.701481] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[   13.701488] system 00:08: ioport range 0xc00-0xc01 has been reserved
[   13.701491] system 00:08: ioport range 0xc14-0xc14 has been reserved
[   13.701494] system 00:08: ioport range 0xc50-0xc52 has been reserved
[   13.701497] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[   13.701500] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[   13.701503] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[   13.701507] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[   13.701510] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[   13.701513] system 00:08: ioport range 0x8000-0x805f has been reserved
[   13.701516] system 00:08: ioport range 0xf40-0xf47 has been reserved
[   13.701519] system 00:08: ioport range 0x280-0x293 has been reserved
[   13.701522] system 00:08: ioport range 0x87f-0x87f has been reserved
[   13.701529] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[   13.701532] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[   13.701535] system 00:09: iomem range 0x0-0xfff could not be reserved
[   13.731991] PCI: Bridge: 0000:00:02.0
[   13.731994]   IO window: 9000-9fff
[   13.731997]   MEM window: c0100000-c01fffff
[   13.732000]   PREFETCH window: c8000000-cfffffff
[   13.732003] PCI: Bridge: 0000:00:04.0
[   13.732004]   IO window: disabled.
[   13.732007]   MEM window: disabled.
[   13.732009]   PREFETCH window: disabled.
[   13.732012] PCI: Bridge: 0000:00:05.0
[   13.732014]   IO window: disabled.
[   13.732017]   MEM window: c0200000-c02fffff
[   13.732019]   PREFETCH window: disabled.
[   13.732031] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[   13.732034]   IO window: 0000a400-0000a4ff
[   13.732039]   IO window: 0000a800-0000a8ff
[   13.732046]   PREFETCH window: 54000000-57ffffff
[   13.732052]   MEM window: 58000000-5bffffff
[   13.732058] PCI: Bridge: 0000:00:14.4
[   13.732062]   IO window: a000-afff
[   13.732068]   MEM window: c0300000-c03fffff
[   13.732074]   PREFETCH window: disabled.
[   13.732090] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   13.732098] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   13.732106] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   13.732135] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 16

Příkaz lsmod | grep ndis:

Kód: [Vybrat]

mike@Notas:~$ lsmod | grep ndis
ndiswrapper           192920  0
usbcore               146412  6 uvcvideo,ndiswrapper,usbhid,ehci_hcd,ohci_hcd

Příkaz sudo ifconfig ath0 up:

Kód: [Vybrat]

mike@Notas:~$ sudo ifconfig ath0 up
ath0: ERROR while getting interface flags: No such device


[Mikec]

Celý text dmsg se nevešel do 40 000 znaků, které jsou povolené pro zprávu, proto doplňuji:

Kód: [Vybrat]

[   13.732153] NET: Registered protocol family 2
[   13.732908] Time: acpi_pm clocksource has been installed.
[   13.732913] Clockevents: could not switch to one-shot mode: lapic is not functional.
[   13.732917] Could not switch to high resolution mode on CPU 0
[   13.737399] Clockevents: could not switch to one-shot mode: lapic is not functional.
[   13.737403] Could not switch to high resolution mode on CPU 1
[   13.773450] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   13.773771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   13.774700] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   13.775177] TCP: Hash tables configured (established 131072 bind 65536)
[   13.775180] TCP reno registered
[   13.789521] checking if image is initramfs... it is
[   14.532450] Freeing initrd memory: 7322k freed
[   14.533302] audit: initializing netlink socket (disabled)
[   14.533316] audit(1224141389.644:1): initialized
[   14.533499] highmem bounce pool size: 64 pages
[   14.535655] VFS: Disk quotas dquot_6.5.1
[   14.535736] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   14.535878] io scheduler noop registered
[   14.535880] io scheduler anticipatory registered
[   14.535882] io scheduler deadline registered
[   14.535894] io scheduler cfq registered (default)
[   14.535902] PCI: MSI quirk detected. MSI deactivated.
[   14.535961] Boot video device is 0000:01:00.0
[   14.536092] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   14.536115] assign_interrupt_mode Found MSI capability
[   14.536119] Allocate Port Service[0000:00:02.0:pcie00]
[   14.536186] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   14.536208] assign_interrupt_mode Found MSI capability
[   14.536210] Allocate Port Service[0000:00:04.0:pcie00]
[   14.536251] Allocate Port Service[0000:00:04.0:pcie02]
[   14.536324] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   14.536346] assign_interrupt_mode Found MSI capability
[   14.536348] Allocate Port Service[0000:00:05.0:pcie00]
[   14.536387] Allocate Port Service[0000:00:05.0:pcie02]
[   14.536649] isapnp: Scanning for PnP cards...
[   14.891452] isapnp: No Plug & Play device found
[   14.924728] Real Time Clock Driver v1.12ac
[   14.924859] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   14.926216] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.926290] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   14.926397] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[   14.926746] i8042.c: Detected active multiplexing controller, rev 1.1.
[   14.926821] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.926827] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   14.926831] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   14.926834] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   14.926837] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   14.940413] mice: PS/2 mouse device common for all mice
[   14.940556] EISA: Probing bus 0 at eisa.0
[   14.940565] Cannot allocate resource for EISA slot 1
[   14.940596] Cannot allocate resource for EISA slot 8
[   14.940598] EISA: Detected 0 cards.
[   14.940602] cpuidle: using governor ladder
[   14.940605] cpuidle: using governor menu
[   14.940701] NET: Registered protocol family 1
[   14.940727] Using IPI No-Shortcut mode
[   14.940764] registered taskstats version 1
[   14.940906]   Magic number: 12:685:268
[   14.940944]   hash matches device ttyud
[   14.941104] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.941107] EDD information not available.
[   14.941379] Freeing unused kernel memory: 368k freed
[   14.943261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   16.250315] fuse init (API version 7.9)
[   16.343491] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[   16.369966] ACPI: Thermal Zone [THRM] (61 C)
[   16.872677] SCSI subsystem initialized
[   16.888031] usbcore: registered new interface driver usbfs
[   16.888064] usbcore: registered new interface driver hub
[   16.895338] usbcore: registered new device driver usb
[   16.918715] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   16.918774] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
[   16.918793] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   16.919103] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[   16.919128] ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0005000
[   16.946144] libata version 3.00 loaded.
[   16.974738] usb usb1: configuration #1 chosen from 1 choice
[   16.974766] hub 1-0:1.0: USB hub found
[   16.974777] hub 1-0:1.0: 4 ports detected
[   17.014595] 8139too Fast Ethernet driver 0.9.28
[   17.079192] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
[   17.079211] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   17.079240] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[   17.079260] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
[   17.138551] usb usb2: configuration #1 chosen from 1 choice
[   17.138579] hub 2-0:1.0: USB hub found
[   17.138590] hub 2-0:1.0: 4 ports detected
[   17.242459] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
[   17.242477] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   17.242504] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[   17.242558] ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0007000
[   17.381745] usb 1-3: new full speed USB device using ohci_hcd and address 2
[   17.394199] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   17.394326] usb usb3: configuration #1 chosen from 1 choice
[   17.394353] hub 3-0:1.0: USB hub found
[   17.394360] hub 3-0:1.0: 8 ports detected
[   17.502334] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[   17.502385] PCI: Setting latency timer of device 0000:00:14.1 to 64
[   17.504024] scsi0 : pata_atiixp
[   17.504922] scsi1 : pata_atiixp
[   18.129078] usb 3-5: new high speed USB device using ehci_hcd and address 3
[   18.257769] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[   18.257775] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[   18.513554] usb 3-5: configuration #1 chosen from 1 choice
[   18.577240] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
[   18.749057] ata1.00: configured for UDMA/33
[   18.828937] usb 2-2: new low speed USB device using ohci_hcd and address 2
[   18.908809] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PP02 PQ: 0 ANSI: 5
[   18.911039] sata_sil 0000:00:12.0: version 2.3
[   18.911088] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[   18.911098] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
[   18.911165] scsi2 : sata_sil
[   18.911225] scsi3 : sata_sil
[   18.911499] ata3: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 19
[   18.911504] ata4: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 19
[   19.035785] usb 2-2: configuration #1 chosen from 1 choice
[   19.058340] usbcore: registered new interface driver hiddev
[   19.062355] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2:1.0/input/input2
[   19.084279] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:13.1-2
[   19.084292] usbcore: registered new interface driver usbhid
[   19.084296] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   19.376017] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   19.385142] ata3.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[   19.385148] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   19.409111] ata3.00: configured for UDMA/100
[   19.719689] ata4: SATA link down (SStatus 0 SControl 310)
[   19.719812] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[   19.721151] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 20
[   19.722365] eth0: RealTek RTL8139 at 0xa000, 00:16:d4:ce:51:fa, IRQ 20
[   19.722368] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   19.725313] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   19.734647] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   19.734653] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   19.754057] Driver 'sd' needs updating - please use bus_type methods
[   19.755697] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   19.755711] sd 2:0:0:0: [sda] Write Protect is off
[   19.755714] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.755734] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.755788] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   19.755799] sd 2:0:0:0: [sda] Write Protect is off
[   19.755801] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.755818] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.755822]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   19.775526] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   19.775530] Uniform CD-ROM driver Revision: 3.20
[   19.775574] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   19.777280]  sda1 < sda5 sda6 sda7 > sda2
[   19.808317] sd 2:0:0:0: [sda] Attached SCSI disk
[   19.818524] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   19.818550] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   20.201265] Attempting manual resume
[   20.201270] swsusp: Resume From Partition 8:6
[   20.201273] PM: Checking swsusp image.
[   20.201472] PM: Resume from disk failed.
[   20.233019] kjournald starting.  Commit interval 5 seconds
[   20.233504] EXT3-fs: mounted filesystem with ordered data mode.
[   28.344245] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   28.400081] Linux agpgart interface v0.102
[   28.475076] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   28.532091] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   28.624115] ACPI: WMI-Acer: Mapper loaded
[   28.784277] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[   28.784285] acer_acpi: Detected Acer WMID interface
[   28.795497] Registered led device: acer_acpi:mail
[   28.884204] input: Power Button (FF) as /devices/virtual/input/input4
[   28.924220] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   28.947586] ACPI: Power Button (FF) [PWRF]
[   28.947660] input: Lid Switch as /devices/virtual/input/input5
[   28.979658] ACPI: Lid Switch [LID]
[   28.979722] input: Power Button (CM) as /devices/virtual/input/input6
[   28.996103] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[   29.027516] ACPI: Power Button (CM) [PWRB]
[   29.027583] input: Sleep Button (CM) as /devices/virtual/input/input7
[   29.075472] ACPI: Sleep Button (CM) [SLPB]
[   29.600922] ndiswrapper (link_pe_images:604): DLL initialize failed for athw.sys
[   29.600963] ndiswrapper: driver netathw (,06/27/2008,7.6.0.239) loaded
[   29.603034] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 21
[   29.603050] ndiswrapper (mp_init:207): assuming WDM (non-NDIS) driver
[   29.726989] Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
[   29.727020] Yenta: Using CSCINT to route CSC interrupts to PCI
[   29.727022] Yenta: Routing CardBus interrupts to PCI
[   29.727029] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[   29.739545] usbcore: registered new interface driver ndiswrapper
[   29.854864] sdhci: Secure Digital Host Controller Interface driver
[   29.854871] sdhci: Copyright(c) Pierre Ossman
[   29.947898] ACPI: AC Adapter [ACAD] (on-line)
[   29.959503] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   29.959509] Socket status: 30000006
[   29.959513] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[   29.959516] cs: IO port probe 0xa000-0xafff: clean.
[   29.959775] pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
[   30.018870] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[   30.018901] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 22
[   30.018977] mmc0: SDHCI at 0xc0300800 irq 22 PIO
[   30.018988] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
[   30.019008] PCI: Enabling device 0000:06:04.4 (0000 -> 0002)
[   30.019013] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 23 (level, low) -> IRQ 22
[   30.019054] mmc1: SDHCI at 0xc0300100 irq 22 PIO
[   30.138237] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[   30.168470] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   30.267333] ACPI: Battery Slot [BAT1] (battery present)
[   30.267805] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:23/LNXVIDEO:00/input/input9
[   30.318857] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   30.319331] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/LNXVIDEO:01/input/input10
[   30.382781] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   30.570708] Linux video capture interface: v2.00
[   30.641411] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100)
[   30.722062] usbcore: registered new interface driver uvcvideo
[   30.722069] USB Video Class driver (v0.1.0)
[   30.722309] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
[   32.210658] cs: IO port probe 0x100-0x3af: clean.
[   32.213013] cs: IO port probe 0x3e0-0x4ff: clean.
[   32.214012] cs: IO port probe 0x820-0x8ff: clean.
[   32.214817] cs: IO port probe 0xc00-0xcf7: clean.
[   32.215689] cs: IO port probe 0xa00-0xaff: clean.
[   32.544813] lp: driver loaded but no devices found
[   32.674263] Adding 2931820k swap on /dev/sda6.  Priority:-1 extents:1 across:2931820k
[   33.258410] EXT3 FS on sda5, internal journal
[   34.700993] ip_tables: (C) 2000-2006 Netfilter Core Team
[   35.263053] No dock devices found.
[   35.548375] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00)
[   35.547982] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
[   35.547988] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
[   36.422438] apm: BIOS not found.
[   36.555727] ppdev: user-space parallel port driver
[   36.668301] audit(1224134213.321:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5179 profile="/usr/sbin/cupsd" namespace="default"
[   38.065957] Clocksource tsc unstable (delta = -142038171 ns)
[   38.176332] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   38.225047] Bluetooth: Core ver 2.11
[   38.225726] NET: Registered protocol family 31
[   38.225731] Bluetooth: HCI device and connection manager initialized
[   38.225736] Bluetooth: HCI socket layer initialized
[   38.236783] Bluetooth: L2CAP ver 2.9
[   38.236788] Bluetooth: L2CAP socket layer initialized
[   38.263877] Bluetooth: RFCOMM socket layer initialized
[   38.263895] Bluetooth: RFCOMM TTY layer initialized
[   38.263897] Bluetooth: RFCOMM ver 1.8
[   39.385131] [drm] Initialized drm 1.1.0 20060810
[   39.783855] NET: Registered protocol family 17
[   40.537679] NET: Registered protocol family 10
[   40.537963] lo: Disabled Privacy Extensions[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:8 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:8 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[    0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[    0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259731
[    0.000000] Kernel command line: root=UUID=9a109de6-a564-4a2f-8c6c-5086079f25a8 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1596.033 MHz processor.
[   12.457609] Console: colour VGA+ 80x25
[   12.457613] console [tty0] enabled
[   12.457987] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   12.458443] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.485618] Memory: 1025952k/1047104k available (2177k kernel code, 20492k reserved, 1006k data, 368k init, 129600k highmem)
[   12.485628] virtual kernel memory layout:
[   12.485629]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   12.485630]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   12.485632]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   12.485633]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   12.485635]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   12.485636]       .data : 0xc0320514 - 0xc041bdc4   (1006 kB)
[   12.485637]       .text : 0xc0100000 - 0xc0320514   (2177 kB)
[   12.485641] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   12.485682] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   12.565638] Calibrating delay using timer specific routine.. 3195.41 BogoMIPS (lpj=6390829)
[   12.565669] Security Framework initialized
[   12.565676] SELinux:  Disabled at boot.
[   12.565692] AppArmor: AppArmor initialized
[   12.565696] Failure registering capabilities with primary security module.
[   12.565706] Mount-cache hash table entries: 512
[   12.565834] Initializing cgroup subsys ns
[   12.565838] Initializing cgroup subsys cpuacct
[   12.565849] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[   12.565859] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   12.565862] CPU: L2 Cache: 512K (64 bytes/line)
[   12.565865] CPU 0(2) -> Core 0
[   12.565868] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410 00002001 00000000 0000001f 00000000
[   12.565879] Compat vDSO mapped to ffffe000.
[   12.565890] Checking 'hlt' instruction... OK.
[   12.581954] SMP alternatives: switching to UP code
[   12.583374] Early unpacking initramfs... done
[   12.968114] ACPI: Core revision 20070126
[   12.968215] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   13.381298] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[   13.381318] SMP alternatives: switching to SMP code
[   13.381853] Booting processor 1/1 eip 3000
[   13.392329] Initializing CPU#1
[   13.469322] Calibrating delay using timer specific routine.. 3192.27 BogoMIPS (lpj=6384548)
[   13.469330] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[   13.469338] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   13.469340] CPU: L2 Cache: 512K (64 bytes/line)
[   13.469343] CPU 1(2) -> Core 1
[   13.469345] AMD C1E detected late. Force timer broadcast.
[   13.469346] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410 00002001 00000000 0000001f 00000000
[   13.469015] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[   13.469031] Total of 2 processors activated (6387.68 BogoMIPS).
[   13.469199] ENABLING IO-APIC IRQs
[   13.469382] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   13.509211] Brought up 2 CPUs
[   13.509240] CPU0 attaching sched-domain:
[   13.509243]  domain 0: span 03
[   13.509245]   groups: 01 02
[   13.509249] CPU1 attaching sched-domain:
[   13.509251]  domain 0: span 03
[   13.509253]   groups: 02 01
[   13.509477] net_namespace: 64 bytes
[   13.509485] Booting paravirtualized kernel on bare hardware
[   13.510010] Time:  7:16:30  Date: 10/16/08
[   13.510039] NET: Registered protocol family 16
[   13.510252] EISA bus registered
[   13.510256] ACPI: bus type pci registered
[   13.521219] PCI: BIOS BUG #81[49435000] found
[   13.521271] PCI: Using configuration type 1
[   13.521281] Setting up standard PCI resources
[   13.523430] ACPI: EC: Look up EC in DSDT
[   13.527071] ACPI: BIOS _OSI(Linux) query ignored via DMI
[   13.527074] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[   13.545264] ACPI: Interpreter enabled
[   13.545266] ACPI: (supports S0 S3 S4 S5)
[   13.545280] ACPI: Using IOAPIC for interrupt routing
[   13.551625] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   13.623093] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[   13.623096] ACPI: EC: driver started in interrupt mode
[   13.623141] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   13.624952] PCI: Transparent bridge - 0000:00:14.4
[   13.625039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   13.625228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[   13.625371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[   13.625522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT]
[   13.625664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[   13.625819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   13.625979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[   13.631085] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[   13.631245] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[   13.631401] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[   13.631557] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[   13.631712] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[   13.631867] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[   13.632023] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[   13.632179] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[   13.632335] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[   13.632480] Linux Plug and Play Support v0.97 (c) Adam Belay
[   13.632518] pnp: PnP ACPI init
[   13.632525] ACPI: bus type pnp registered
[   13.673712] pnp: PnP ACPI: found 10 devices
[   13.673715] ACPI: ACPI bus type pnp unregistered
[   13.673718] PnPBIOS: Disabled by ACPI PNP
[   13.673974] PCI: Using ACPI for IRQ routing
[   13.673976] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   13.673983] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[   13.673986] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[   13.673989] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
[   13.685440] NET: Registered protocol family 8
[   13.685443] NET: Registered protocol family 20
[   13.685515] AppArmor: AppArmor Filesystem Enabled
[   13.701456] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   13.701460] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[   13.701463] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[   13.701472] system 00:08: ioport range 0x1080-0x1080 has been reserved
[   13.701475] system 00:08: ioport range 0x40b-0x40b has been reserved
[   13.701478] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   13.701481] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[   13.701488] system 00:08: ioport range 0xc00-0xc01 has been reserved
[   13.701491] system 00:08: ioport range 0xc14-0xc14 has been reserved
[   13.701494] system 00:08: ioport range 0xc50-0xc52 has been reserved
[   13.701497] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[   13.701500] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[   13.701503] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[   13.701507] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[   13.701510] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[   13.701513] system 00:08: ioport range 0x8000-0x805f has been reserved
[   13.701516] system 00:08: ioport range 0xf40-0xf47 has been reserved
[   13.701519] system 00:08: ioport range 0x280-0x293 has been reserved
[   13.701522] system 00:08: ioport range 0x87f-0x87f has been reserved
[   13.701529] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[   13.701532] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[   13.701535] system 00:09: iomem range 0x0-0xfff could not be reserved
[   13.731991] PCI: Bridge: 0000:00:02.0
[   13.731994]   IO window: 9000-9fff
[   13.731997]   MEM window: c0100000-c01fffff
[   13.732000]   PREFETCH window: c8000000-cfffffff
[   13.732003] PCI: Bridge: 0000:00:04.0
[   13.732004]   IO window: disabled.
[   13.732007]   MEM window: disabled.
[   13.732009]   PREFETCH window: disabled.
[   13.732012] PCI: Bridge: 0000:00:05.0
[   13.732014]   IO window: disabled.
[   13.732017]   MEM window: c0200000-c02fffff
[   13.732019]   PREFETCH window: disabled.
[   13.732031] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[   13.732034]   IO window: 0000a400-0000a4ff
[   13.732039]   IO window: 0000a800-0000a8ff
[   13.732046]   PREFETCH window: 54000000-57ffffff
[   13.732052]   MEM window: 58000000-5bffffff
[   13.732058] PCI: Bridge: 0000:00:14.4
[   13.732062]   IO window: a000-afff
[   13.732068]   MEM window: c0300000-c03fffff
[   13.732074]   PREFETCH window: disabled.
[   13.732090] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   13.732098] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   13.732106] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   13.732135] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 16
[   13.732153] NET: Registered protocol family 2
[   13.732908] Time: acpi_pm clocksource has been installed.
[   13.732913] Clockevents: could not switch to one-shot mode: lapic is not functional.
[   13.732917] Could not switch to high resolution mode on CPU 0
[   13.737399] Clockevents: could not switch to one-shot mode: lapic is not functional.
[   13.737403] Could not switch to high resolution mode on CPU 1
[   13.773450] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   13.773771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   13.774700] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   13.775177] TCP: Hash tables configured (established 131072 bind 65536)
[   13.775180] TCP reno registered
[   13.789521] checking if image is initramfs... it is
[   14.532450] Freeing initrd memory: 7322k freed
[   14.533302] audit: initializing netlink socket (disabled)
[   14.533316] audit(1224141389.644:1): initialized
[   14.533499] highmem bounce pool size: 64 pages
[   14.535655] VFS: Disk quotas dquot_6.5.1
[   14.535736] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   14.535878] io scheduler noop registered
[   14.535880] io scheduler anticipatory registered
[   14.535882] io scheduler deadline registered
[   14.535894] io scheduler cfq registered (default)
[   14.535902] PCI: MSI quirk detected. MSI deactivated.
[   14.535961] Boot video device is 0000:01:00.0
[   14.536092] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   14.536115] assign_interrupt_mode Found MSI capability
[   14.536119] Allocate Port Service[0000:00:02.0:pcie00]
[   14.536186] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   14.536208] assign_interrupt_mode Found MSI capability
[   14.536210] Allocate Port Service[0000:00:04.0:pcie00]
[   14.536251] Allocate Port Service[0000:00:04.0:pcie02]
[   14.536324] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   14.536346] assign_interrupt_mode Found MSI capability
[   14.536348] Allocate Port Service[0000:00:05.0:pcie00]
[   14.536387] Allocate Port Service[0000:00:05.0:pcie02]
[   14.536649] isapnp: Scanning for PnP cards...
[   14.891452] isapnp: No Plug & Play device found
[   14.924728] Real Time Clock Driver v1.12ac
[   14.924859] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   14.926216] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.926290] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   14.926397] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[   14.926746] i8042.c: Detected active multiplexing controller, rev 1.1.
[   14.926821] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.926827] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   14.926831] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   14.926834] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   14.926837] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   14.940413] mice: PS/2 mouse device common for all mice
[   14.940556] EISA: Probing bus 0 at eisa.0
[   14.940565] Cannot allocate resource for EISA slot 1
[   14.940596] Cannot allocate resource for EISA slot 8
[   14.940598] EISA: Detected 0 cards.
[   14.940602] cpuidle: using governor ladder
[   14.940605] cpuidle: using governor menu
[   14.940701] NET: Registered protocol family 1
[   14.940727] Using IPI No-Shortcut mode
[   14.940764] registered taskstats version 1
[   14.940906]   Magic number: 12:685:268
[   14.940944]   hash matches device ttyud
[   14.941104] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.941107] EDD information not available.
[   14.941379] Freeing unused kernel memory: 368k freed
[   14.943261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   16.250315] fuse init (API version 7.9)
[   16.343491] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[   16.369966] ACPI: Thermal Zone [THRM] (61 C)
[   16.872677] SCSI subsystem initialized
[   16.888031] usbcore: registered new interface driver usbfs
[   16.888064] usbcore: registered new interface driver hub
[   16.895338] usbcore: registered new device driver usb
[   16.918715] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   16.918774] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
[   16.918793] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   16.919103] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[   16.919128] ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0005000
[   16.946144] libata version 3.00 loaded.
[   16.974738] usb usb1: configuration #1 chosen from 1 choice
[   16.974766] hub 1-0:1.0: USB hub found
[   16.974777] hub 1-0:1.0: 4 ports detected
[   17.014595] 8139too Fast Ethernet driver 0.9.28
[   17.079192] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
[   17.079211] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   17.079240] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[   17.079260] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
[   17.138551] usb usb2: configuration #1 chosen from 1 choice
[   17.138579] hub 2-0:1.0: USB hub found
[   17.138590] hub 2-0:1.0: 4 ports detected
[   17.242459] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
[   17.242477] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   17.242504] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[   17.242558] ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0007000
[   17.381745] usb 1-3: new full speed USB device using ohci_hcd and address 2
[   17.394199] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   17.394326] usb usb3: configuration #1 chosen from 1 choice
[   17.394353] hub 3-0:1.0: USB hub found
[   17.394360] hub 3-0:1.0: 8 ports detected
[   17.502334] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[   17.502385] PCI: Setting latency timer of device 0000:00:14.1 to 64
[   17.504024] scsi0 : pata_atiixp
[   17.504922] scsi1 : pata_atiixp
[   18.129078] usb 3-5: new high speed USB device using ehci_hcd and address 3
[   18.257769] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[   18.257775] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[   18.513554] usb 3-5: configuration #1 chosen from 1 choice
[   18.577240] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
[   18.749057] ata1.00: configured for UDMA/33
[   18.828937] usb 2-2: new low speed USB device using ohci_hcd and address 2
[   18.908809] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PP02 PQ: 0 ANSI: 5
[   18.911039] sata_sil 0000:00:12.0: version 2.3
[   18.911088] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[   18.911098] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
[   18.911165] scsi2 : sata_sil
[   18.911225] scsi3 : sata_sil
[   18.911499] ata3: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 19
[   18.911504] ata4: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 19
[   19.035785] usb 2-2: configuration #1 chosen from 1 choice
[   19.058340] usbcore: registered new interface driver hiddev
[   19.062355] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2:1.0/input/input2
[   19.084279] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:13.1-2
[   19.084292] usbcore: registered new interface driver usbhid
[   19.084296] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   19.376017] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   19.385142] ata3.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[   19.385148] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   19.409111] ata3.00: configured for UDMA/100
[   19.719689] ata4: SATA link down (SStatus 0 SControl 310)
[   19.719812] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[   19.721151] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 20
[   19.722365] eth0: RealTek RTL8139 at 0xa000, 00:16:d4:ce:51:fa, IRQ 20
[   19.722368] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   19.725313] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   19.734647] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   19.734653] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   19.754057] Driver 'sd' needs updating - please use bus_type methods
[   19.755697] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   19.755711] sd 2:0:0:0: [sda] Write Protect is off
[   19.755714] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.755734] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.755788] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   19.755799] sd 2:0:0:0: [sda] Write Protect is off
[   19.755801] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.755818] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.755822]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   19.775526] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   19.775530] Uniform CD-ROM driver Revision: 3.20
[   19.775574] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   19.777280]  sda1 < sda5 sda6 sda7 > sda2
[   19.808317] sd 2:0:0:0: [sda] Attached SCSI disk
[   19.818524] sr 0:0:0:0: Attached scsi generic sg0 type 5

[Mikec]

A pořád to ještě nebylo celé...

Kód: [Vybrat]

[   19.818550] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   20.201265] Attempting manual resume
[   20.201270] swsusp: Resume From Partition 8:6
[   20.201273] PM: Checking swsusp image.
[   20.201472] PM: Resume from disk failed.
[   20.233019] kjournald starting.  Commit interval 5 seconds
[   20.233504] EXT3-fs: mounted filesystem with ordered data mode.
[   28.344245] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   28.400081] Linux agpgart interface v0.102
[   28.475076] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   28.532091] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   28.624115] ACPI: WMI-Acer: Mapper loaded
[   28.784277] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[   28.784285] acer_acpi: Detected Acer WMID interface
[   28.795497] Registered led device: acer_acpi:mail
[   28.884204] input: Power Button (FF) as /devices/virtual/input/input4
[   28.924220] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   28.947586] ACPI: Power Button (FF) [PWRF]
[   28.947660] input: Lid Switch as /devices/virtual/input/input5
[   28.979658] ACPI: Lid Switch [LID]
[   28.979722] input: Power Button (CM) as /devices/virtual/input/input6
[   28.996103] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[   29.027516] ACPI: Power Button (CM) [PWRB]
[   29.027583] input: Sleep Button (CM) as /devices/virtual/input/input7
[   29.075472] ACPI: Sleep Button (CM) [SLPB]
[   29.600922] ndiswrapper (link_pe_images:604): DLL initialize failed for athw.sys
[   29.600963] ndiswrapper: driver netathw (,06/27/2008,7.6.0.239) loaded
[   29.603034] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 21
[   29.603050] ndiswrapper (mp_init:207): assuming WDM (non-NDIS) driver
[   29.726989] Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
[   29.727020] Yenta: Using CSCINT to route CSC interrupts to PCI
[   29.727022] Yenta: Routing CardBus interrupts to PCI
[   29.727029] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[   29.739545] usbcore: registered new interface driver ndiswrapper
[   29.854864] sdhci: Secure Digital Host Controller Interface driver
[   29.854871] sdhci: Copyright(c) Pierre Ossman
[   29.947898] ACPI: AC Adapter [ACAD] (on-line)
[   29.959503] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   29.959509] Socket status: 30000006
[   29.959513] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[   29.959516] cs: IO port probe 0xa000-0xafff: clean.
[   29.959775] pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
[   30.018870] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[   30.018901] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 22
[   30.018977] mmc0: SDHCI at 0xc0300800 irq 22 PIO
[   30.018988] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
[   30.019008] PCI: Enabling device 0000:06:04.4 (0000 -> 0002)
[   30.019013] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 23 (level, low) -> IRQ 22
[   30.019054] mmc1: SDHCI at 0xc0300100 irq 22 PIO
[   30.138237] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[   30.168470] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   30.267333] ACPI: Battery Slot [BAT1] (battery present)
[   30.267805] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:23/LNXVIDEO:00/input/input9
[   30.318857] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   30.319331] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/LNXVIDEO:01/input/input10
[   30.382781] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   30.570708] Linux video capture interface: v2.00
[   30.641411] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100)
[   30.722062] usbcore: registered new interface driver uvcvideo
[   30.722069] USB Video Class driver (v0.1.0)
[   30.722309] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
[   32.210658] cs: IO port probe 0x100-0x3af: clean.
[   32.213013] cs: IO port probe 0x3e0-0x4ff: clean.
[   32.214012] cs: IO port probe 0x820-0x8ff: clean.
[   32.214817] cs: IO port probe 0xc00-0xcf7: clean.
[   32.215689] cs: IO port probe 0xa00-0xaff: clean.
[   32.544813] lp: driver loaded but no devices found
[   32.674263] Adding 2931820k swap on /dev/sda6.  Priority:-1 extents:1 across:2931820k
[   33.258410] EXT3 FS on sda5, internal journal
[   34.700993] ip_tables: (C) 2000-2006 Netfilter Core Team
[   35.263053] No dock devices found.
[   35.548375] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00)
[   35.547982] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
[   35.547988] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
[   36.422438] apm: BIOS not found.
[   36.555727] ppdev: user-space parallel port driver
[   36.668301] audit(1224134213.321:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5179 profile="/usr/sbin/cupsd" namespace="default"
[   38.065957] Clocksource tsc unstable (delta = -142038171 ns)
[   38.176332] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   38.225047] Bluetooth: Core ver 2.11
[   38.225726] NET: Registered protocol family 31
[   38.225731] Bluetooth: HCI device and connection manager initialized
[   38.225736] Bluetooth: HCI socket layer initialized
[   38.236783] Bluetooth: L2CAP ver 2.9
[   38.236788] Bluetooth: L2CAP socket layer initialized
[   38.263877] Bluetooth: RFCOMM socket layer initialized
[   38.263895] Bluetooth: RFCOMM TTY layer initialized
[   38.263897] Bluetooth: RFCOMM ver 1.8
[   39.385131] [drm] Initialized drm 1.1.0 20060810
[   39.783855] NET: Registered protocol family 17
[   40.537679] NET: Registered protocol family 10
[   40.537963] lo: Disabled Privacy Extensions
[   44.254674] hda-intel: Invalid position buffer, using LPIB read method instead.
[   46.490024] eth0: no IPv6 routers present
[   51.546657] CPU0 attaching NULL sched-domain.
[   51.546668] CPU1 attaching NULL sched-domain.
[   51.554859] CPU0 attaching sched-domain:
[   51.554865]  domain 0: span 03
[   51.554870]   groups: 01 02
[   51.554874] CPU1 attaching sched-domain:
[   51.554877]  domain 0: span 03
[   51.554881]   groups: 02 01

[   44.254674] hda-intel: Invalid position buffer, using LPIB read method instead.
[   46.490024] eth0: no IPv6 routers present
[   51.546657] CPU0 attaching NULL sched-domain.
[   51.546668] CPU1 attaching NULL sched-domain.
[   51.554859] CPU0 attaching sched-domain:
[   51.554865]  domain 0: span 03
[   51.554870]   groups: 01 02
[   51.554874] CPU1 attaching sched-domain:
[   51.554877]  domain 0: span 03
[   51.554881]   groups: 02 01

[   14.940596] Cannot allocate resource for EISA slot 8
[   14.940598] EISA: Detected 0 cards.
[   14.940602] cpuidle: using governor ladder
[   14.940605] cpuidle: using governor menu
[   14.940701] NET: Registered protocol family 1
[   14.940727] Using IPI No-Shortcut mode
[   14.940764] registered taskstats version 1
[   14.940906]   Magic number: 12:685:268
[   14.940944]   hash matches device ttyud
[   14.941104] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.941107] EDD information not available.
[   14.941379] Freeing unused kernel memory: 368k freed
[   14.943261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   16.250315] fuse init (API version 7.9)
[   16.343491] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[   16.369966] ACPI: Thermal Zone [THRM] (61 C)
[   16.872677] SCSI subsystem initialized
[   16.888031] usbcore: registered new interface driver usbfs
[   16.888064] usbcore: registered new interface driver hub
[   16.895338] usbcore: registered new device driver usb
[   16.918715] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   16.918774] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
[   16.918793] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   16.919103] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[   16.919128] ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0005000
[   16.946144] libata version 3.00 loaded.
[   16.974738] usb usb1: configuration #1 chosen from 1 choice
[   16.974766] hub 1-0:1.0: USB hub found
[   16.974777] hub 1-0:1.0: 4 ports detected
[   17.014595] 8139too Fast Ethernet driver 0.9.28
[   17.079192] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
[   17.079211] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   17.079240] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[   17.079260] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
[   17.138551] usb usb2: configuration #1 chosen from 1 choice
[   17.138579] hub 2-0:1.0: USB hub found
[   17.138590] hub 2-0:1.0: 4 ports detected
[   17.242459] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
[   17.242477] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   17.242504] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[   17.242558] ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0007000
[   17.381745] usb 1-3: new full speed USB device using ohci_hcd and address 2
[   17.394199] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   17.394326] usb usb3: configuration #1 chosen from 1 choice
[   17.394353] hub 3-0:1.0: USB hub found
[   17.394360] hub 3-0:1.0: 8 ports detected
[   17.502334] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[   17.502385] PCI: Setting latency timer of device 0000:00:14.1 to 64
[   17.504024] scsi0 : pata_atiixp
[   17.504922] scsi1 : pata_atiixp
[   18.129078] usb 3-5: new high speed USB device using ehci_hcd and address 3
[   18.257769] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[   18.257775] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[   18.513554] usb 3-5: configuration #1 chosen from 1 choice
[   18.577240] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
[   18.749057] ata1.00: configured for UDMA/33
[   18.828937] usb 2-2: new low speed USB device using ohci_hcd and address 2
[   18.908809] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PP02 PQ: 0 ANSI: 5
[   18.911039] sata_sil 0000:00:12.0: version 2.3
[   18.911088] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[   18.911098] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
[   18.911165] scsi2 : sata_sil
[   18.911225] scsi3 : sata_sil
[   18.911499] ata3: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 19
[   18.911504] ata4: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 19
[   19.035785] usb 2-2: configuration #1 chosen from 1 choice
[   19.058340] usbcore: registered new interface driver hiddev
[   19.062355] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2:1.0/input/input2
[   19.084279] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:13.1-2
[   19.084292] usbcore: registered new interface driver usbhid
[   19.084296] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   19.376017] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   19.385142] ata3.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[   19.385148] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   19.409111] ata3.00: configured for UDMA/100
[   19.719689] ata4: SATA link down (SStatus 0 SControl 310)
[   19.719812] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[   19.721151] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 20
[   19.722365] eth0: RealTek RTL8139 at 0xa000, 00:16:d4:ce:51:fa, IRQ 20
[   19.722368] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   19.725313] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   19.734647] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   19.734653] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   19.754057] Driver 'sd' needs updating - please use bus_type methods
[   19.755697] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   19.755711] sd 2:0:0:0: [sda] Write Protect is off
[   19.755714] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.755734] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.755788] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   19.755799] sd 2:0:0:0: [sda] Write Protect is off
[   19.755801] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.755818] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.755822]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   19.775526] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   19.775530] Uniform CD-ROM driver Revision: 3.20
[   19.775574] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   19.777280]  sda1 < sda5 sda6 sda7 > sda2
[   19.808317] sd 2:0:0:0: [sda] Attached SCSI disk
[   19.818524] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   19.818550] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   20.201265] Attempting manual resume
[   20.201270] swsusp: Resume From Partition 8:6
[   20.201273] PM: Checking swsusp image.
[   20.201472] PM: Resume from disk failed.
[   20.233019] kjournald starting.  Commit interval 5 seconds
[   20.233504] EXT3-fs: mounted filesystem with ordered data mode.
[   28.344245] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   28.400081] Linux agpgart interface v0.102
[   28.475076] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   28.532091] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   28.624115] ACPI: WMI-Acer: Mapper loaded
[   28.784277] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[   28.784285] acer_acpi: Detected Acer WMID interface
[   28.795497] Registered led device: acer_acpi:mail
[   28.884204] input: Power Button (FF) as /devices/virtual/input/input4
[   28.924220] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   28.947586] ACPI: Power Button (FF) [PWRF]
[   28.947660] input: Lid Switch as /devices/virtual/input/input5
[   28.979658] ACPI: Lid Switch [LID]
[   28.979722] input: Power Button (CM) as /devices/virtual/input/input6
[   28.996103] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[   29.027516] ACPI: Power Button (CM) [PWRB]
[   29.027583] input: Sleep Button (CM) as /devices/virtual/input/input7
[   29.075472] ACPI: Sleep Button (CM) [SLPB]
[   29.600922] ndiswrapper (link_pe_images:604): DLL initialize failed for athw.sys
[   29.600963] ndiswrapper: driver netathw (,06/27/2008,7.6.0.239) loaded
[   29.603034] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 21
[   29.603050] ndiswrapper (mp_init:207): assuming WDM (non-NDIS) driver
[   29.726989] Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
[   29.727020] Yenta: Using CSCINT to route CSC interrupts to PCI
[   29.727022] Yenta: Routing CardBus interrupts to PCI
[   29.727029] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[   29.739545] usbcore: registered new interface driver ndiswrapper
[   29.854864] sdhci: Secure Digital Host Controller Interface driver
[   29.854871] sdhci: Copyright(c) Pierre Ossman
[   29.947898] ACPI: AC Adapter [ACAD] (on-line)
[   29.959503] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   29.959509] Socket status: 30000006
[   29.959513] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[   29.959516] cs: IO port probe 0xa000-0xafff: clean.
[   29.959775] pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
[   30.018870] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[   30.018901] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 22
[   30.018977] mmc0: SDHCI at 0xc0300800 irq 22 PIO
[   30.018988] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
[   30.019008] PCI: Enabling device 0000:06:04.4 (0000 -> 0002)
[   30.019013] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 23 (level, low) -> IRQ 22
[   30.019054] mmc1: SDHCI at 0xc0300100 irq 22 PIO
[   30.138237] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[   30.168470] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   30.267333] ACPI: Battery Slot [BAT1] (battery present)
[   30.267805] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:23/LNXVIDEO:00/input/input9
[   30.318857] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   30.319331] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/LNXVIDEO:01/input/input10
[   30.382781] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   30.570708] Linux video capture interface: v2.00
[   30.641411] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100)
[   30.722062] usbcore: registered new interface driver uvcvideo
[   30.722069] USB Video Class driver (v0.1.0)
[   30.722309] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
[   32.210658] cs: IO port probe 0x100-0x3af: clean.
[   32.213013] cs: IO port probe 0x3e0-0x4ff: clean.
[   32.214012] cs: IO port probe 0x820-0x8ff: clean.
[   32.214817] cs: IO port probe 0xc00-0xcf7: clean.
[   32.215689] cs: IO port probe 0xa00-0xaff: clean.
[   32.544813] lp: driver loaded but no devices found
[   32.674263] Adding 2931820k swap on /dev/sda6.  Priority:-1 extents:1 across:2931820k
[   33.258410] EXT3 FS on sda5, internal journal
[   34.700993] ip_tables: (C) 2000-2006 Netfilter Core Team
[   35.263053] No dock devices found.
[   35.548375] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00)
[   35.547982] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
[   35.547988] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
[   36.422438] apm: BIOS not found.
[   36.555727] ppdev: user-space parallel port driver
[   36.668301] audit(1224134213.321:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5179 profile="/usr/sbin/cupsd" namespace="default"
[   38.065957] Clocksource tsc unstable (delta = -142038171 ns)
[   38.176332] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   38.225047] Bluetooth: Core ver 2.11
[   38.225726] NET: Registered protocol family 31
[   38.225731] Bluetooth: HCI device and connection manager initialized
[   38.225736] Bluetooth: HCI socket layer initialized
[   38.236783] Bluetooth: L2CAP ver 2.9
[   38.236788] Bluetooth: L2CAP socket layer initialized
[   38.263877] Bluetooth: RFCOMM socket layer initialized
[   38.263895] Bluetooth: RFCOMM TTY layer initialized
[   38.263897] Bluetooth: RFCOMM ver 1.8
[   39.385131] [drm] Initialized drm 1.1.0 20060810
[   39.783855] NET: Registered protocol family 17
[   40.537679] NET: Registered protocol family 10
[   40.537963] lo: Disabled Privacy Extensions
[   44.254674] hda-intel: Invalid position buffer, using LPIB read method instead.
[   46.490024] eth0: no IPv6 routers present
[   51.546657] CPU0 attaching NULL sched-domain.
[   51.546668] CPU1 attaching NULL sched-domain.
[   51.554859] CPU0 attaching sched-domain:
[   51.554865]  domain 0: span 03
[   51.554870]   groups: 01 02
[   51.554874] CPU1 attaching sched-domain:
[   51.554877]  domain 0: span 03
[   51.554881]   groups: 02 01
Možná by nebylo od věci ještě poznámka. Pokud dám Systém->Správa->Hardware drivers, tak se objeví následující tabulka, kde změním spodní dva řádky na Enabled, objeví se zelená ikonka In use, ale chce to po mě restart. Tak restartuju a je to opět takto...

[attachment deleted by admin]

[Mikec]

Nakonec jsem to vyřešil jinak! Měl jsem pocit, že těch instalací všech možných instalací všech možných ovladačů bylo tak nějak moc, tak jsem zkusil přeinstalovat celý systém. Po znovuinstalaci jsem objevil, že ovladače tu již nějaké jsou a tak jsem to vyzkoušel a po nastavení připojení na router (zadání všech těch hloupostí kam a proč se připojit) to fungovalo.

Proto doporučuji všem, kteří mají problém s tím, že vyzkoušeli už mraky návodů a pořád nic, tak at spíš zkusí přeinstalovat systém!