Dobrý den,
můžete mi prosím někdo poradit. Měl jsem USB modem GPC 6420 a po nějaké době se mi podařilo ho připojit přez program Gnome-PPP. Byl jsem nucen tento modem vyměnit za novější model Axess-tel MV11ONH. Při prvním použití jsem v Gnome-PPP dal detekovat modem a vše bylo funkční. Bohuźel tento modem nepoužívám sám a tak se stalo, že modem zřejmě někdo nestandartně vypnul a zapnul.
Modem se standartně nepřipojil. Dal jsem ho znovu detekovat a opětovně vše nastavil. Bohužel se mi stale nedaří připojit. Modem je na Win plně funkční.
Přikládám výpis Gnome-PPP:
--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATX3
ATX3
OK
--> Sending: ATZ
ATZ
OK
--> Sending: ATZ
ATZ
OK
--> Modem initialized.
--> Sending: ATM1L3DT#777
--> Waiting for carrier.
ATM1L3DT#777
NO DIALTONE
--> No dial tone. Trying again in 5 seconds.
--> Maximum Attempts Exceeded..Aborting!!
--> Disconnecting at Wed Aug 26 19:14:18 2009
Vypis lsusb:
Bus 001 Device 010: ID 0fce:d0d9 Sony Ericsson Mobile Communications AB
Bus 001 Device 006: ID 040d:6204 VIA Technologies, Inc.
Bus 001 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd WebCam, Chipset DC-1125 similar to 174f:a311 - Asus F2F, F2J, F3J, F3T, G1, Z53JA
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 1726:1000
Bus 004 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
a dmesg:
[ 0.600043] NetLabel: Initializing
[ 0.600045] NetLabel: domain hash size = 128
[ 0.600047] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.600063] NetLabel: unlabeled traffic allowed by default
[ 0.600217] hpet clockevent registered
[ 0.600222] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.600229] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.600234] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.604071] AppArmor: AppArmor Filesystem Enabled
[ 0.612011] pnp: PnP ACPI init
[ 0.612028] ACPI: bus type pnp registered
[ 0.615038] pnp: PnP ACPI: found 14 devices
[ 0.615040] ACPI: ACPI bus type pnp unregistered
[ 0.615044] PnPBIOS: Disabled by ACPI PNP
[ 0.615056] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.615067] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.615071] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.615074] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.615077] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.615081] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.615085] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[ 0.615088] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.615092] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.615098] system 00:09: ioport range 0x250-0x253 has been reserved
[ 0.615102] system 00:09: ioport range 0x256-0x25f has been reserved
[ 0.615105] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.615109] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.615112] system 00:09: iomem range 0xfec10000-0xfec17fff has been reserved
[ 0.615115] system 00:09: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 0.615126] system 00:0c: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.615133] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.615136] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.615140] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.615143] system 00:0d: iomem range 0x100000-0x1f7fffff could not be reserved
[ 0.649891] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.649894] pci 0000:00:1c.0: IO window: disabled
[ 0.649901] pci 0000:00:1c.0: MEM window: 0xfa700000-0xfa7fffff
[ 0.649907] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.649915] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.649919] pci 0000:00:1c.1: IO window: 0xb000-0xcfff
[ 0.649926] pci 0000:00:1c.1: MEM window: 0xfa800000-0xfe7fffff
[ 0.649932] pci 0000:00:1c.1: PREFETCH window: 0x0000009ff00000-0x000000bfefffff
[ 0.649941] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.649945] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.649952] pci 0000:00:1e.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.649958] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.649976] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.649983] pci 0000:00:1c.0: setting latency timer to 64
[ 0.649994] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.649999] pci 0000:00:1c.1: setting latency timer to 64
[ 0.650008] pci 0000:00:1e.0: setting latency timer to 64
[ 0.650013] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.650016] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.650019] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.650021] bus: 01 index 1 mmio: [0xfa700000-0xfa7fffff]
[ 0.650024] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.650026] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.650029] bus: 02 index 0 io port: [0xb000-0xcfff]
[ 0.650032] bus: 02 index 1 mmio: [0xfa800000-0xfe7fffff]
[ 0.650034] bus: 02 index 2 mmio: [0x9ff00000-0xbfefffff]
[ 0.650037] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.650039] bus: 05 index 0 io port: [0xd000-0xdfff]
[ 0.650042] bus: 05 index 1 mmio: [0xfe800000-0xfe8fffff]
[ 0.650045] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.650047] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.650050] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.650059] NET: Registered protocol family 2
[ 0.664067] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.664321] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.664393] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.664457] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.664459] TCP reno registered
[ 0.668074] NET: Registered protocol family 1
[ 0.668206] checking if image is initramfs... it is
[ 1.100608] Switched to high resolution mode on CPU 1
[ 1.104044] Switched to high resolution mode on CPU 0
[ 1.408099] Freeing initrd memory: 7381k freed
[ 1.408146] Simple Boot Flag at 0x52 set to 0x1
[ 1.408365] cpufreq: No nForce2 chipset.
[ 1.408536] audit: initializing netlink socket (disabled)
[ 1.408567] type=2000 audit(1251301979.405:1): initialized
[ 1.417369] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.419023] VFS: Disk quotas dquot_6.5.1
[ 1.419097] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.419836] fuse init (API version 7.10)
[ 1.419938] msgmni has been set to 977
[ 1.420165] alg: No test for stdrng (krng)
[ 1.420179] io scheduler noop registered
[ 1.420182] io scheduler anticipatory registered
[ 1.420184] io scheduler deadline registered
[ 1.420201] io scheduler cfq registered (default)
[ 1.420215] pci 0000:00:02.0: Boot video device
[ 1.423637] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.423690] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.423729] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.423746] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.423763] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.423778] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.423855] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.423904] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.423938] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 1.423955] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.423970] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.423985] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.424075] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.424519] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.424737] ACPI: AC Adapter [AC0] (on-line)
[ 1.425114] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.448472] ACPI: Battery Slot [BAT0] (battery present)
[ 1.448559] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.448563] ACPI: Power Button (FF) [PWRF]
[ 1.448632] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.448644] ACPI: Power Button (CM) [PWRB]
[ 1.448698] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.448705] ACPI: Sleep Button (CM) [SLPB]
[ 1.448761] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.454269] ACPI: Lid Switch [LID]
[ 1.454754] ACPI: SSDT 1F7C8FD0, 0D07 (r1 AMI CPU1PM 1 INTL 2002026)
[ 1.455442] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.455469] processor ACPI_CPU:00: registered as cooling_device0
[ 1.455474] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.455662] ACPI: SSDT 1F7C9CE0, 0D07 (r1 AMI CPU2PM 1 INTL 2002026)
[ 1.456397] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.456419] processor ACPI_CPU:01: registered as cooling_device1
[ 1.456423] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.463874] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.464940] ACPI: Thermal Zone [THRM] (52 C)
[ 1.465006] isapnp: Scanning for PnP cards...
[ 1.818880] isapnp: No Plug & Play device found
[ 1.829156] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.830444] brd: module loaded
[ 1.830811] loop: module loaded
[ 1.830888] Fixed MDIO Bus: probed
[ 1.830894] PPP generic driver version 2.4.2
[ 1.830960] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.830992] Driver 'sd' needs updating - please use bus_type methods
[ 1.831003] Driver 'sr' needs updating - please use bus_type methods
[ 1.831092] ata_piix 0000:00:1f.2: version 2.12
[ 1.831110] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.831115] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.831160] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.831261] scsi0 : ata_piix
[ 1.831361] scsi1 : ata_piix
[ 1.832805] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.832809] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.996491] ata1.00: ATA-7: ST98823AS, 3.06, max UDMA/133
[ 1.996494] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.012486] ata1.00: configured for UDMA/133
[ 2.176606] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
[ 2.192577] ata2.00: configured for UDMA/33
[ 2.193064] scsi 0:0:0:0: Direct-Access ATA ST98823AS 3.06 PQ: 0 ANSI: 5
[ 2.193176] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.193198] sd 0:0:0:0: [sda] Write Protect is off
[ 2.193201] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.193233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.193309] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.193327] sd 0:0:0:0: [sda] Write Protect is off
[ 2.193330] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.193361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.193365] sda: sda1 sda2 sda3
[ 2.225152] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.225207] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.227183] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.21 PQ: 0 ANSI: 5
[ 2.228869] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.228873] Uniform CD-ROM driver Revision: 3.20
[ 2.228976] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.229018] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.229747] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.229771] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.229794] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.229798] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.229870] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.233773] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.233781] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.233797] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb3bc00
[ 2.248012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.248105] usb usb1: configuration #1 chosen from 1 choice
[ 2.248139] hub 1-0:1.0: USB hub found
[ 2.248148] hub 1-0:1.0: 8 ports detected
[ 2.248281] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.248299] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.248324] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.248331] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.248335] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.248385] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.248413] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880
[ 2.248501] usb usb2: configuration #1 chosen from 1 choice
[ 2.248534] hub 2-0:1.0: USB hub found
[ 2.248542] hub 2-0:1.0: 2 ports detected
[ 2.248635] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.248642] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.248646] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.248692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.248727] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 2.248812] usb usb3: configuration #1 chosen from 1 choice
[ 2.248842] hub 3-0:1.0: USB hub found
[ 2.248849] hub 3-0:1.0: 2 ports detected
[ 2.248945] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.248951] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.248956] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.249011] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.249049] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480
[ 2.249132] usb usb4: configuration #1 chosen from 1 choice
[ 2.249161] hub 4-0:1.0: USB hub found
[ 2.249169] hub 4-0:1.0: 2 ports detected
[ 2.249270] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.249277] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.249281] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.249330] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.249365] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[ 2.249448] usb usb5: configuration #1 chosen from 1 choice
[ 2.249481] hub 5-0:1.0: USB hub found
[ 2.249488] hub 5-0:1.0: 2 ports detected
[ 2.249647] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.251764] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.252937] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.252944] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.252947] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.252950] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.252953] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.256047] mice: PS/2 mouse device common for all mice
[ 2.276087] rtc_cmos 00:03: RTC can wake from S4
[ 2.276134] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.276167] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.276241] device-mapper: uevent: version 1.0.3
[ 2.276345] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.276442] device-mapper: multipath: version 1.0.5 loaded
[ 2.276446] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.276547] EISA: Probing bus 0 at eisa.0
[ 2.276586] EISA: Detected 0 cards.
[ 2.276706] cpuidle: using governor ladder
[ 2.276813] cpuidle: using governor menu
[ 2.277416] TCP cubic registered
[ 2.277529] NET: Registered protocol family 10
[ 2.278021] lo: Disabled Privacy Extensions
[ 2.278413] NET: Registered protocol family 17
[ 2.278433] Bluetooth: L2CAP ver 2.11
[ 2.278436] Bluetooth: L2CAP socket layer initialized
[ 2.278439] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.278441] Bluetooth: SCO socket layer initialized
[ 2.278484] Bluetooth: RFCOMM socket layer initialized
[ 2.278488] Marking TSC unstable due to TSC halts in idle
[ 2.278498] Bluetooth: RFCOMM TTY layer initialized
[ 2.278501] Bluetooth: RFCOMM ver 1.10
[ 2.287964] Using IPI No-Shortcut mode
[ 2.288043] registered taskstats version 1
[ 2.288152] Magic number: 5:895:892
[ 2.288193] bdi default: hash matches
[ 2.288241] rtc_cmos 00:03: setting system clock to 2009-08-26 15:53:01 UTC (1251301981)
[ 2.288245] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.288248] EDD information not available.
[ 2.288537] Freeing unused kernel memory: 532k freed
[ 2.288715] Write protecting the kernel text: 4116k
[ 2.288780] Write protecting the kernel read-only data: 1528k
[ 2.308090] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.568498] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.568535] 8139cp 0000:05:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.571641] 8139too Fast Ethernet driver 0.9.28
[ 2.571683] 8139too 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.573872] eth0: RealTek RTL8139 at 0xd800, 00:18:f3:2b:75:67, IRQ 16
[ 2.573875] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.673076] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 2.805928] usb 1-4: configuration #1 chosen from 1 choice
[ 2.967793] PM: Starting manual resume from disk
[ 2.967797] PM: Resume from partition 8:2
[ 2.967799] PM: Checking hibernation image.
[ 2.968020] PM: Resume from disk failed.
[ 3.002670] kjournald starting. Commit interval 5 seconds
[ 3.002705] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.028066] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 3.171364] usb 1-8: configuration #3 chosen from 1 choice
[ 3.421245] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.585585] usb 2-1: configuration #1 chosen from 1 choice
[ 3.828058] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 4.070218] usb 4-1: configuration #1 chosen from 1 choice
[ 11.276255] udev: starting version 141
[ 11.476860] cdc_acm 1-8:3.1: ttyACM0: USB ACM device
[ 11.478052] cdc_acm 1-8:3.3: ttyACM1: USB ACM device
[ 11.478722] usbcore: registered new interface driver cdc_acm
[ 11.478750] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 11.562569] cdc_wdm 1-8:3.7: cdc-wdm0: USB WDM device
[ 11.562594] usbcore: registered new interface driver cdc_wdm
[ 11.573872] end_request: I/O error, dev sr0, sector 0
[ 11.573880] Buffer I/O error on device sr0, logical block 0
[ 11.581186] end_request: I/O error, dev sr0, sector 0
[ 11.581193] Buffer I/O error on device sr0, logical block 0
[ 11.593648] cfg80211: Calling CRDA to update world regulatory domain
[ 11.951337] cfg80211: World regulatory domain updated:
[ 11.951341] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.951345] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.951348] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.951351] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.951354] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.951357] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.044153] tpm_inf_pnp 00:0b: Found TPM with ID IFX0102
[ 12.044210] tpm_inf_pnp 00:0b: TPM found: config base 0x254, data base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 12.420707] Linux video capture interface: v2.00
[ 12.501960] asus-laptop: Asus Laptop Support version 0.42
[ 12.505782] asus-laptop: F2F model detected
[ 12.512234] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 12.512339] usbcore: registered new interface driver btusb
[ 12.575388] Linux agpgart interface v0.103
[ 12.589758] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 12.590457] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 12.593502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.618102] intel_rng: FWH not detected
[ 12.700589] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 12.739514] stkwebcam: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 12.739548] usbcore: registered new interface driver stkwebcam
[ 12.786992] usb0: register 'cdc_ether' at usb-0000:00:1d.7-8, CDC Ethernet Device, 02:80:37:09:03:00
[ 12.787026] usbcore: registered new interface driver cdc_ether
[ 12.799429] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/input/input7
[ 12.801669] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 12.877170] iTCO_vendor_support: vendor-support=0
[ 12.879097] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 12.879234] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860)
[ 12.879308] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.910536] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.918170] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 12.918174] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 12.918293] iwl3945 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.918308] iwl3945 0000:01:00.0: setting latency timer to 64
[ 12.918358] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 12.918656] iwl3945 0000:01:00.0: irq 2301 for MSI/MSI-X
[ 12.973321] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 12.974525] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 13.020586] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 13.052645] nf_conntrack version 0.5.0 (8060 buckets, 32240 max)
[ 13.052931] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 13.052935] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 13.052938] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 13.214383] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.214458] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.479787] lp: driver loaded but no devices found
[ 13.595304] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
[ 13.972993] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa0471b/0x200000
[ 14.016374] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 14.133413] EXT3 FS on sda1, internal journal
[ 14.991276] kjournald starting. Commit interval 5 seconds
[ 14.992258] EXT3 FS on sda3, internal journal
[ 14.992267] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.307197] type=1505 audit(1251301994.515:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2257
[ 15.365090] type=1505 audit(1251301994.575:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2261
[ 15.365214] type=1505 audit(1251301994.575:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2261
[ 15.365266] type=1505 audit(1251301994.575:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2261
[ 15.365316] type=1505 audit(1251301994.575:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2261
[ 15.532511] type=1505 audit(1251301994.743:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2266
[ 15.532734] type=1505 audit(1251301994.743:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2266
[ 15.565421] type=1505 audit(1251301994.775:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2270
[ 21.246865] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 21.246870] vboxdrv: Successfully done.
[ 21.246872] vboxdrv: Found 2 processor cores.
[ 21.246980] vboxdrv: fAsync=0 offMin=0x334 offMax=0x1ed2
[ 21.247034] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.247037] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 24.784085] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.784089] Bluetooth: BNEP filters: protocol multicast
[ 24.853934] ppdev: user-space parallel port driver
[ 24.888872] Bridge firewalling registered
[ 26.348737] [drm] Initialized drm 1.1.0 20060810
[ 26.357064] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.357073] pci 0000:00:02.0: setting latency timer to 64
[ 26.357917] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 26.360651] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 26.360677] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 27.701442] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 28.789132] iwl3945 0000:01:00.0: firmware: requesting iwlwifi-3945-1.ucode
[ 28.982787] Registered led device: iwl-phy0:radio
[ 28.982866] Registered led device: iwl-phy0:assoc
[ 28.982898] Registered led device: iwl-phy0:RX
[ 28.982927] Registered led device: iwl-phy0:TX
[ 28.990807] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.194134] wlan0: direct probe to AP 00:4f:62:0d:b7:9d try 1
[ 30.392058] wlan0: direct probe to AP 00:4f:62:0d:b7:9d try 2
[ 30.592052] wlan0: direct probe to AP 00:4f:62:0d:b7:9d try 3
[ 30.796050] wlan0: direct probe to AP 00:4f:62:0d:b7:9d timed out
[ 31.813127] cdrom: This disc doesn't have any tracks I recognize!
[ 39.572038] usb0: no IPv6 routers present
[ 43.082487] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 145.801770] PPP BSD Compression module registered
[ 145.924159] PPP Deflate Compression module registered
[ 743.416058] usb 1-2: new high speed USB device using ehci_hcd and address 6
[ 743.553022] usb 1-2: configuration #1 chosen from 1 choice
[ 743.941743] Initializing USB Mass Storage driver...
[ 743.942089] scsi2 : SCSI emulation for USB Mass Storage devices
[ 743.942261] usbcore: registered new interface driver usb-storage
[ 743.942268] USB Mass Storage support registered.
[ 743.942927] usb-storage: device found at 6
[ 743.942932] usb-storage: waiting for device to settle before scanning
[ 748.940495] usb-storage: device scan complete
[ 748.941274] scsi 2:0:0:0: Direct-Access HTS54804 0M9AT00 MG2O PQ: 0 ANSI: 2
[ 748.943610] sd 2:0:0:0: [sdb] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 748.944857] sd 2:0:0:0: [sdb] Write Protect is off
[ 748.944863] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 748.944868] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 748.958762] sd 2:0:0:0: [sdb] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 748.959348] sd 2:0:0:0: [sdb] Write Protect is off
[ 748.959354] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 748.959359] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 748.959368] sdb: sdb1 sdb2 < sdb5 >
[ 749.011952] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 749.012519] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2833.808069] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 2833.971213] usb 4-2: configuration #1 chosen from 1 choice
[ 2834.350537] usbcore: registered new interface driver usbserial
[ 2834.350566] USB Serial support registered for generic
[ 2834.350680] usbcore: registered new interface driver usbserial_generic
[ 2834.350684] usbserial: USB Serial Driver core
[ 2834.515259] USB Serial support registered for GSM modem (1-port)
[ 2834.515429] option 4-2:1.0: GSM modem (1-port) converter detected
[ 2834.515576] usb 4-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 2834.515606] option 4-2:1.1: GSM modem (1-port) converter detected
[ 2834.515690] usb 4-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 2834.515715] usbcore: registered new interface driver option
[ 2834.515719] option: v0.7.2:USB Driver for GSM modems
[ 3060.103688] usb 1-8: USB disconnect, address 5
[ 3060.105692] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, de215000/1e215000 (bad dma)
[ 3060.105798] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-8, CDC Ethernet Device
[ 3273.704065] usb 1-8: new high speed USB device using ehci_hcd and address 8
[ 3273.851805] usb 1-8: configuration #3 chosen from 1 choice
[ 3273.856893] cdc_acm 1-8:3.1: ttyACM0: USB ACM device
[ 3273.858874] cdc_acm 1-8:3.3: ttyACM1: USB ACM device
[ 3273.865286] cdc_wdm 1-8:3.7: cdc-wdm0: USB WDM device
[ 3273.869896] usb0: register 'cdc_ether' at usb-0000:00:1d.7-8, CDC Ethernet Device, 02:80:37:09:03:00
[ 3289.168026] usb0: no IPv6 routers present
[ 4801.154805] usb 1-8: USB disconnect, address 8
[ 4801.156554] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, de215100/1e215100 (bad dma)
[ 4801.156656] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-8, CDC Ethernet Device
[ 4912.037606] usb 1-8: new high speed USB device using ehci_hcd and address 9
[ 4912.181946] usb 1-8: configuration #3 chosen from 1 choice
[ 4912.185854] cdc_acm 1-8:3.1: ttyACM0: USB ACM device
[ 4912.188616] cdc_acm 1-8:3.3: ttyACM1: USB ACM device
[ 4912.191260] cdc_wdm 1-8:3.7: cdc-wdm0: USB WDM device
[ 4912.194890] usb0: register 'cdc_ether' at usb-0000:00:1d.7-8, CDC Ethernet Device, 02:80:37:09:03:00
[ 4913.691060] usb 1-8: USB disconnect, address 9
[ 4913.702667] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, de215180/1e215180 (bad dma)
[ 4913.702811] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-8, CDC Ethernet Device
[ 4974.956055] usb 1-8: new high speed USB device using ehci_hcd and address 10
[ 4975.095152] usb 1-8: configuration #3 chosen from 1 choice
[ 4975.098697] cdc_acm 1-8:3.1: ttyACM0: USB ACM device
[ 4975.101682] cdc_acm 1-8:3.3: ttyACM1: USB ACM device
[ 4975.107673] cdc_wdm 1-8:3.7: cdc-wdm0: USB WDM device
[ 4975.115754] usb0: register 'cdc_ether' at usb-0000:00:1d.7-8, CDC Ethernet Device, 02:80:37:09:03:00
[ 4990.466858] usb0: no IPv6 routers present
Rád bych modem rozběhal opět přez Gnome-ppp, připadně pomocí network manageru.
Můžete mi někdo prosím poradit?
Téma: Připojení na mobilní internet od O2 Mobil 1024 (modem AxessTel MVH110H) (Přečteno 5495 krát)