Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna  (Přečteno 2935 krát)

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Neumím si to vysvětlit. Tiskárna se tam po nainstalování normálně ukáže ale když dám něco vytisknou tak to po nějaké chvilce vyhodí chybu.
Konkrétně se jedná o tiskárnu epson stylus rx 620 a je provozována s notebookem asus F3t. Jestli to pomůže tak můžu přiložit výsledek
testu tiskárny(troubleshoot.txt) .Moc prosím o pomoc. Tuto sestavu provozuji u sebe ve firmě a když mi nepůjdou ještě chvilku tisknout faktury tak brzo zbankrotuji:)

Martin 'Želva' Malý

  • Závislák
  • ***
  • Příspěvků: 2438
  • Zalezlej v krunýři
    • Želvův zápisník
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #1 kdy: 23 Ledna 2009, 19:30:48 »
Přilož sem priosím ten soubor.
Osobní počítače jsou nanic a opravdu nikdy nedělají to, co se po nich chce. Fakt. I když na něm třeba běží Debian, Ubuntu, Arch, Widle, Mac, je to skoro furt to samé... :-(

Pokud mi dáváte zápornou karmu, budu rád, když mi napíšete proč, abych aspoň věděl, jak jsem vám uškodil. ;-)

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz

fenquick

  • Aktivní člen
  • *
  • Příspěvků: 225
  • Professional llama
    • Linux User #487408
******** Neděkujte mně! Poděkujte přitažlivé síle Měsíce! ********
.........................................................................................MacGyver

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #4 kdy: 23 Ledna 2009, 19:55:23 »
Myslím že by to mohlo být ono. Hned zítra ráno to pojedu na firmu odskoušet. Zatím dík za pomoc:)

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #5 kdy: 25 Ledna 2009, 15:35:35 »
takže pořád nic. Tohle to vyhazuje: Stylus-Photo-RX620 "/usr/lib/cups/filter/pdftopdf failed"

Fracty

  • Stálý člen
  • **
  • Příspěvků: 809
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #6 kdy: 25 Ledna 2009, 15:53:16 »
je to trošku pozdě, ale na firemní věci / věci které jsou nutné pro běh firmy se nešahá, do té doby dokud to není potřeba! tedy zapamatovat si pokud to funguje, nešahat na to

pokud se, ale na to šáhne, mělo by se to před tím vše pořádně ozkoušet, tedy nabootovat livko a otestovat vše nutné.
No jinak proč jste vůbec ve firmě přecházel?

na závěr rada

buď přejít zpět na 8.04, nebo si podívat jak to bylo nastaveno na 8.04 upravit...
btw tohle se děje i při tisku zkušební stránky nebo přímo z konzole?

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #7 kdy: 25 Ledna 2009, 15:56:32 »
dík za radu,
zkušební stránka

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #8 kdy: 25 Ledna 2009, 18:25:16 »
Zkus tady ještě dát výpisy z příkazů

lsusb (se zapnutou tiskárnou)
cat /etc/sane.d/epson* | grep -Ev '^#|^$'
http://www.openstreetmap.org - mapy celého světa "wiki style"

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #9 kdy: 25 Ledna 2009, 18:27:49 »
karlosek@karlosek-laptop:~$ lsusb
Bus 002 Device 006: ID 04b8:0811 Seiko Epson Corp. Stylus Photo RX620 all-in-one
Bus 002 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd WebCam, Chipset DC-1125 similar to 174f:a311 - Asus F2F, F2J, F3J, F3T, G1, Z53JA
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 001 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
karlosek@karlosek-laptop:~$

karlosek@karlosek-laptop:~$ cat /etc/sane.d/epson* | grep -Ev '^#|^$'
scsi EPSON
scsi "EPSON SC"
usb
scsi EPSON
usb
net autodiscovery
karlosek@karlosek-laptop:~$

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #10 kdy: 25 Ledna 2009, 18:39:54 »
Prosím ještě výpis z

cat /etc/sane.d/epson.conf
ls /etc/udev/rules.d
http://www.openstreetmap.org - mapy celého světa "wiki style"

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #11 kdy: 25 Ledna 2009, 18:42:06 »
karlosek@karlosek-laptop:~$ cat /etc/sane.d/epson.conf
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend.
usb
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x110
# And for the scanner module, use the following configuration:
#usb /dev/usbscanner0
#usb /dev/usb/scanner0
karlosek@karlosek-laptop:~$

karlosek@karlosek-laptop:~$ ls /etc/udev/rules.d
README                             62-bluez-hid2hci.rules
024_hpmud.rules                    65-dmsetup.rules
05-options.rules                   65-id-type.rules
20-names.rules                     70-persistent-cd.rules
30-cdrom_id.rules                  70-persistent-net.rules
40-basic-permissions.rules         75-cd-aliases-generator.rules
40-permissions.rules               75-persistent-net-generator.rules
45-fuse.rules                      80-programs.rules
45-hplip.rules                     85-alsa.rules
45-libmtp8.rules                   85-brltty.rules
50-libpisock9.rules                85-hdparm.rules
50-libsane-extras.rules            85-hplj10xx.rules
50-xserver-xorg-input-wacom.rules  85-hwclock.rules
55-hpmud.rules                     85-ifupdown.rules
60-persistent-input.rules          85-pcmcia.rules
60-persistent-storage.rules        90-hal.rules
60-persistent-storage-tape.rules   90-modprobe.rules
60-symlinks.rules                  95-udev-late.rules
61-persistent-storage-edd.rules
karlosek@karlosek-laptop:~$

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #12 kdy: 25 Ledna 2009, 19:10:16 »
Zálohuj soubor /etc/sane.d/epson.conf cp /etc/sane.d/epson.conf /etc/sane.d/epson.conf_backup. Původní epson.conf změň tak, aby vypadal takto
Kód: [Vybrat]
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend.
usb
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
usb 0x4b8 0x811
# And for the scanner module, use the following configuration:
usb /dev/usbscanner0
usb /dev/usb/scanner0

Dále vytvoř soubor /etc/udev/rules.d/45-libsane.rules gksudo gedit /etc/udev/rules.d/45-libsane.rules a vlož do něj
Kód: [Vybrat]
SYSFS (idVendor) == "04b8", SYSFS (idProduct) == "0811", MODE = "664", GROUP = "scanner" uložit. Pak restartovat udev sudo /etc/init.d/udev restart. Zkus pak znovu tisknout, příp. troubleshoot. A pokud budeš dávat výpisy, dej je jako "Vložit kód".

Tento postup je víceméně pro zprovoznění scanneru, ale našel jsem na internetu, že to pomohlo i při tisku.
http://www.openstreetmap.org - mapy celého světa "wiki style"

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #13 kdy: 25 Ledna 2009, 19:21:08 »
Kód: [Vybrat]
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Choose printer):
{'cups_dest': <cups.Dest Stylus-Photo-RX620>,
 'cups_instance': None,
 'cups_queue': 'Stylus-Photo-RX620',
 'cups_queue_listed': True}
Page 3 (Check printer sanity):
{'cups_device_uri_scheme': u'usb',
 'cups_printer_dict': {'device-uri': u'usb://EPSON/Stylus%20Photo%20RX620',
                       'printer-info': u'EPSON Stylus Photo RX620',
                       'printer-is-shared': True,
                       'printer-location': u'karlosek-laptop',
                       'printer-make-and-model': u'Epson Stylus Photo RX620 - CUPS+Gutenprint v5.2.0-rc1',
                       'printer-state': 3,
                       'printer-state-message': u'/usr/lib/cups/filter/pdftopdf failed',
                       'printer-state-reasons': [u'none'],
                       'printer-type': 8425484,
                       'printer-uri-supported': u'ipp://localhost:631/printers/Stylus-Photo-RX620'},
 'cups_printer_remote': False,
 'is_cups_class': False}
Page 4 (Check PPD sanity):
{'cups_printer_ppd_defaults': {u'C0L0': {u'StpCDInnerRadius': u'None',
                                         u'StpFullBleed': u'False',
                                         u'StpInkSet': u'None'},
                               u'C0L1': {u'StpCDInnerDiameter': u'121',
                                         u'StpCDOuterDiameter': u'329',
                                         u'StpCDXAdjustment': u'0',
                                         u'StpCDYAdjustment': u'0'},
                               u'C0L2': {u'StpPrintingDirection': u'None',
                                         u'StpWeave': u'None'},
                               u'C0L3': {u'StpInkType': u'None'},
                               u'C0L4': {u'StpFeedSequence': u'None'},
                               u'C1L0': {u'StpBrightness': u'None',
                                         u'StpColorCorrection': u'None',
                                         u'StpContrast': u'None',
                                         u'StpFineBrightness': u'None',
                                         u'StpFineContrast': u'None',
                                         u'StpFineSaturation': u'None',
                                         u'StpImageType': u'TextGraphics',
                                         u'StpSaturation': u'None'},
                               u'C1L1': {u'StpBlackDensity': u'None',
                                         u'StpCyanDensity': u'None',
                                         u'StpDensity': u'None',
                                         u'StpDitherAlgorithm': u'None',
                                         u'StpFineBlackDensity': u'None',
                                         u'StpFineCyanDensity': u'None',
                                         u'StpFineDensity': u'None',
                                         u'StpFineMagentaDensity': u'None',
                                         u'StpFineYellowDensity': u'None',
                                         u'StpMagentaDensity': u'None',
                                         u'StpYellowDensity': u'None'},
                               u'C1L2': {u'StpBlackGamma': u'None',
                                         u'StpCyanBalance': u'None',
                                         u'StpCyanGamma': u'None',
                                         u'StpFineBlackGamma': u'None',
                                         u'StpFineCyanBalance': u'None',
                                         u'StpFineCyanGamma': u'None',
                                         u'StpFineGamma': u'None',
                                         u'StpFineMagentaBalance': u'None',
                                         u'StpFineMagentaGamma': u'None',
                                         u'StpFineYellowBalance': u'None',
                                         u'StpFineYellowGamma': u'None',
                                         u'StpGamma': u'None',
                                         u'StpMagentaBalance': u'None',
                                         u'StpMagentaGamma': u'None',
                                         u'StpYellowBalance': u'None',
                                         u'StpYellowGamma': u'None'},
                               u'C1L4': {u'StpLinearContrast': u'False'},
                               u'C1L5': {u'StpBlackTrans': u'None',
                                         u'StpDropSize1': u'None',
                                         u'StpDropSize2': u'None',
                                         u'StpDropSize3': u'None',
                                         u'StpFineBlackTrans': u'None',
                                         u'StpFineDropSize1': u'None',
                                         u'StpFineDropSize2': u'None',
                                         u'StpFineDropSize3': u'None',
                                         u'StpFineGCRLower': u'None',
                                         u'StpFineGCRUpper': u'None',
                                         u'StpFineInkLimit': u'None',
                                         u'StpFineLightCyanScale': u'None',
                                         u'StpFineLightCyanTrans': u'None',
                                         u'StpFineLightCyanValue': u'None',
                                         u'StpFineLightMagentaScale': u'None',
                                         u'StpFineLightMagentaTrans': u'None',
                                         u'StpFineLightMagentaValue': u'None',
                                         u'StpGCRLower': u'None',
                                         u'StpGCRUpper': u'None',
                                         u'StpInkLimit': u'None',
                                         u'StpLightCyanScale': u'None',
                                         u'StpLightCyanTrans': u'None',
                                         u'StpLightCyanValue': u'None',
                                         u'StpLightMagentaScale': u'None',
                                         u'StpLightMagentaTrans': u'None',
                                         u'StpLightMagentaValue': u'None'},
                               u'General': {u'ColorModel': u'RGB',
                                            u'InputSlot': u'Standard',
                                            u'MediaType': u'Plain',
                                            u'OutputOrder': u'Reverse',
                                            u'PageRegion': u'A4',
                                            u'PageSize': u'A4',
                                            u'Resolution': u'361x360dpi',
                                            u'StpColorPrecision': u'Normal',
                                            u'StpQuality': u'Standard',
                                            u'StpiShrinkOutput': u'Shrink'}},
 'cups_printer_ppd_valid': True,
 'missing_pkgs_and_exes': ([], [])}
Page 5 (Local or remote?):
{'printer_is_remote': False}
Page 6 (Choose device):
{'cups_device_dict': {'device-class': u'direct',
                      'device-id': u'MFG:EPSON;CMD:ESCPL2,BDC,D4;MDL:Stylus Photo RX620;CLS:PRINTER;DES:EPSON Stylus Photo RX620;',
                      'device-info': u'EPSON Stylus Photo RX620 USB #1',
                      'device-make-and-model': u'EPSON Stylus Photo RX620'}}
Page 7 (Printer state reasons):
{'printer-state-message': u'/usr/lib/cups/filter/pdftopdf failed',
 'printer-state-reasons': [u'none']}
Page 8 (Error log checkpoint):
{'cups_server_settings': {'DefaultAuthType': 'Basic',
                          'MaxLogSize': '0',
                          'SystemGroup': 'lpadmin',
                          '_debug_logging': '1',
                          '_remote_admin': '0',
                          '_remote_any': '0',
                          '_remote_printers': '0',
                          '_share_printers': '0',
                          '_user_cancel_any': '0'},
 'error_log_checkpoint': 212066}
Page 9 (Print test page):
{'test_page_job_status': [(False,
                           25,
                           'Stylus-Photo-RX620',
                           'Test Page',
                           'Zastaveno',
                           None),
                          (False,
                           29,
                           'Stylus-Photo-RX620',
                           'Moje Aukro - Aukce - Aukro - Aukce OnLine',
                           'Zastaveno',
                           None)],
 'test_page_successful': False}
Page 10 (Error log fetch):
{'error_log': ['D [25/Jan/2009:19:10:11 +0100] cupsdCloseClient: 11',
               'D [25/Jan/2009:19:10:11 +0100] cupsdAcceptClient: 11 from localhost (Domain)',
               'D [25/Jan/2009:19:10:11 +0100] cupsdReadClient: 11 POST / HTTP/1.1',
               'D [25/Jan/2009:19:10:11 +0100] cupsdAuthorize: No authentication data provided.',
               'D [25/Jan/2009:19:10:11 +0100] Get-Jobs ipp://localhost/jobs/',
               'D [25/Jan/2009:19:10:11 +0100] [Job 29] Loading attributes...',
               'D [25/Jan/2009:19:10:11 +0100] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok)',
               'D [25/Jan/2009:19:10:11 +0100] cupsdCloseClient: 11',
               'D [25/Jan/2009:19:10:11 +0100] cupsdAcceptClient: 11 from localhost (Domain)',
               'D [25/Jan/2009:19:10:11 +0100] cupsdReadClient: 11 POST / HTTP/1.1',
               'D [25/Jan/2009:19:10:11 +0100] cupsdAuthorize: No authentication data provided.',
               'D [25/Jan/2009:19:10:11 +0100] Create-Printer-Subscription /',
               'D [25/Jan/2009:19:10:11 +0100] cupsdCreateSubscription(con=0x7f8c0a957470(11), uri="/")',
               'D [25/Jan/2009:19:10:11 +0100] pullmethod="ippget"',
               'D [25/Jan/2009:19:10:11 +0100] notify-lease-duration=86400',
               'D [25/Jan/2009:19:10:11 +0100] notify-time-interval=0',
               'D [25/Jan/2009:19:10:11 +0100] cupsdAddSubscription(mask=17800, dest=(nil)(), job=(nil)(0), uri="(null)")',
               'D [25/Jan/2009:19:10:11 +0100] Added subscription 47 for server',
               'I [25/Jan/2009:19:10:11 +0100] Saving subscriptions.conf...',
               'D [25/Jan/2009:19:10:11 +0100] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok)',
               'D [25/Jan/2009:19:10:11 +0100] cupsdCloseClient: 11',
               'D [25/Jan/2009:19:10:12 +0100] cupsdAcceptClient: 11 from localhost (Domain)',
               'D [25/Jan/2009:19:10:12 +0100] cupsdReadClient: 11 POST / HTTP/1.1',
               'D [25/Jan/2009:19:10:12 +0100] cupsdAuthorize: No authentication data provided.',
               'D [25/Jan/2009:19:10:12 +0100] Get-Notifications /',
               'D [25/Jan/2009:19:10:12 +0100] cupsdIsAuthorized: requesting-user-name="karlosek"',
               'D [25/Jan/2009:19:10:12 +0100] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok)',
               'D [25/Jan/2009:19:10:12 +0100] cupsdCloseClient: 11',
               'D [25/Jan/2009:19:10:20 +0100] cupsdAcceptClient: 11 from localhost (Domain)',
               'D [25/Jan/2009:19:10:20 +0100] [Job 28] Unloading...',
               'D [25/Jan/2009:19:10:20 +0100] cupsdCloseClient: 11',
               'D [25/Jan/2009:19:10:20 +0100] cupsdAcceptClient: 11 from localhost (Domain)',
               'D [25/Jan/2009:19:10:20 +0100] cupsdReadClient: 11 POST / HTTP/1.1',
               'D [25/Jan/2009:19:10:20 +0100] cupsdAuthorize: No authentication data provided.',
               'D [25/Jan/2009:19:10:20 +0100] Cancel-Subscription /',
               'D [25/Jan/2009:19:10:20 +0100] cupsdIsAuthorized: requesting-user-name="karlosek"',
               'I [25/Jan/2009:19:10:20 +0100] Saving subscriptions.conf...',
               'D [25/Jan/2009:19:10:20 +0100] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok)',
               'D [25/Jan/2009:19:10:20 +0100] cupsdCloseClient: 11',
               'D [25/Jan/2009:19:10:20 +0100] cupsdAcceptClient: 11 from localhost (Domain)',
               'D [25/Jan/2009:19:10:20 +0100] cupsdCloseClient: 10',
               'D [25/Jan/2009:19:10:20 +0100] cupsdReadClient: 11 GET /admin/log/error_log HTTP/1.1',
               'D [25/Jan/2009:19:10:20 +0100] cupsdAuthorize: No authentication data provided.']}

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #14 kdy: 25 Ledna 2009, 19:29:42 »
Netiskne? Nevidím v tom logu žádnou chybu, taky je nějaký kratší než ten původní.

Jestli se to nepovede, můžeš ještě zkusit přeinstalovat cups - odinstalovat, asi to s sebou bude chtít stáhnout spoustu dalších balíčků, a pak tam zkusit dát verzi hardy, tam se ale myslím jmenuje cupsys (http://packages.ubuntu.com/hardy/cupsys). Samozřejmě si vše důležité zálohuj.
http://www.openstreetmap.org - mapy celého světa "wiki style"

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #15 kdy: 25 Ledna 2009, 19:43:18 »
Ještě mě napadlo méně drastické řešení - přeinstalovat tiskárnu. V Systém→Správa→Tisk ji odinstaluj, a pak dej přidat novou a nainstaluj ji znovu ručně.

Problém je, že ta tiskárna by měla být podporovaná, ale někteří hlásí bug cupsu v Intrepidu (viz Tvůj původní error log - problém filtrů).
http://www.openstreetmap.org - mapy celého světa "wiki style"

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #16 kdy: 25 Ledna 2009, 20:11:19 »
pořád to samý, nefachčí:( cups z hardyho nejde nainstalovat.

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #17 kdy: 25 Ledna 2009, 20:17:47 »
smazal jsem jí a nainstaloval znovu a pořád to samý

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #18 kdy: 25 Ledna 2009, 20:31:11 »
Ten poslední výpis není moc informativní. Můžeš ještě zkusit vytisknout nějaký jednoduchý textový soubor, třeba v geditu, ale předtím nastavit logování takto:

Otevři si /etc/cups/cupsd.conf, najdi řádek s LogLevel (skoro na začátku) a změň parametr na debug (místo toho info či warning co tam asi máš). Pak restartuj cups (sudo /etc/init.d/cups restart).

Zkus tisknout, pokud dojde k chybě, mrkni se do logu (sudo cat /var/log/cups/error_log).
http://www.openstreetmap.org - mapy celého světa "wiki style"

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #19 kdy: 25 Ledna 2009, 21:02:08 »
Kód: [Vybrat]
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting Duplex to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set string CDInnerRadius to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set special string CDInnerRadius to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set dimension CDOuterDiameter to 329 (329)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set dimension CDInnerDiameter to 121 (121)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set dimension CDXAdjustment to 0 (0)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set dimension CDYAdjustment to 0 (0)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting Resolution to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set string InkType to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set special string InkType to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting UseGloss to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set string InkSet to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set special string InkSet to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set string PrintingDirection to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set special string PrintingDirection to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set bool FullBleed to False (0)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set string Weave to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set special string Weave to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting OutputOrder to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting AlignmentPasses to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting AlignmentChoices to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting InkChange to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting AlternateAlignmentPasses to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting AlternateAlignmentChoices to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting SupportsPacketMode to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting InterchangeableInk to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting InkChannels to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting ChannelNames to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting PrintingMode to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting RawChannels to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CyanHueCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting MagentaHueCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting YellowHueCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting BlueHueCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting OrangeHueCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting RedHueCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_max_hres to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_max_vres to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_min_hres to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_min_vres to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_nozzles to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_black_nozzles to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_fast_nozzles to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_min_nozzles to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_min_black_nozzles to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_min_fast_nozzles to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_nozzle_start to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_black_nozzle_start to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_fast_nozzle_start to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_nozzle_separation to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_black_nozzle_separation to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_fast_nozzle_separation to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_separation_rows to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_max_paper_width to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_max_paper_height to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_min_paper_width to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_min_paper_height to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_max_imageable_width to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_max_imageable_height to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_extra_feed to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_pseudo_separation_rows to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_base_separation to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_resolution_scale to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_initial_vertical_offset to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_black_initial_vertical_offset to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_max_black_resolution to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_zero_margin_offset to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_extra_720dpi_separation to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_micro_left_margin to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_min_horizontal_position_alignment to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_base_horizontal_position_alignment to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_bidirectional_upper_limit to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_physical_channels to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_left_margin to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_right_margin to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_top_margin to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_bottom_margin to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_ink_type to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_bits to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_base_res to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_alignment_passes to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_alignment_choices to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_alternate_alignment_passes to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_alternate_alignment_choices to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_cd_x_offset to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_cd_y_offset to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_cd_page_width to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_cd_page_height to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_paper_extra_bottom to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_preinit_sequence to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_preinit_remote_sequence to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_postinit_remote_sequence to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting escp2_vertical_borderless_sequence to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting PaperThickness to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting VacuumIntensity to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting FeedSequence to 'None'
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting PrintMethod to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting PlatenGap to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting FeedAdjustment to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set string ColorCorrection to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set special string ColorCorrection to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting ChannelBitDepth to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting InputImageType to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting STPIOutputType to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting STPIRawChannels to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting SimpleGamma to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set bool LinearContrast to False (0)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Width: 595, height: 842, absolute margins: , , ,
D [25/Jan/2009:20:50:42 +0100] [Job 37] Relative margins: 0, 0, 0, 0
D [25/Jan/2009:20:50:42 +0100] [Job 37] PPD options: -r361x360 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842
D [25/Jan/2009:20:50:42 +0100] [Job 37] PostScript to be injected:
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting LUTDumpFile to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CyanCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting MagentaCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting YellowCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting BlackCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting RedCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting GreenCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting BlueCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting WhiteCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting HueMap to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting SatMap to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting LumMap to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting GCRCurve to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh0 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh1 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh2 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh3 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh4 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh5 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh6 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh7 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh8 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh9 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh10 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh11 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh12 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh13 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh14 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh15 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh16 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh17 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh18 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh19 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh20 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh21 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh22 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh23 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh24 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh25 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh26 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh27 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh28 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh29 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh30 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting CurveCh31 to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set string DitherAlgorithm to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set special string DitherAlgorithm to None
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set string ImageType to TextGraphics
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Set special string ImageType to TextGraphics
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting JobMode to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint:   Not setting PageNumber to (null)
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint: End options
D [25/Jan/2009:20:50:42 +0100] [Job 37] Running cat | /usr/bin/ps2pdf13 -dAutoRotatePages=/None -dAutoFilterColorImages=false                -dNOPLATFONTS -dPARANOIDSAFER -sstdout=%stderr -dColorImageFilter=/FlateEncode                -dPDFSETTINGS=/printer -r361x360 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 - -
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint: About to start printing loop.
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint: Printed total 0 bytes
D [25/Jan/2009:20:50:42 +0100] [Job 37] Gutenprint: Used 0,240 seconds user, 0,010 seconds system, 0,507 seconds elapsed
D [25/Jan/2009:20:50:42 +0100] PID 6548 (/usr/lib/cups/backend/usb) exited with no errors.
D [25/Jan/2009:20:50:42 +0100] PID 6544 (/usr/lib/cups/filter/rastertogutenprint.5.2) exited with no errors.
D [25/Jan/2009:20:50:42 +0100] cupsdReadClient: 7 POST / HTTP/1.1
D [25/Jan/2009:20:50:42 +0100] cupsdAuthorize: Authorized as root using Local
D [25/Jan/2009:20:50:42 +0100] CUPS-Get-Printers
D [25/Jan/2009:20:50:42 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:42 +0100] cupsdReadClient: 7 POST / HTTP/1.1
D [25/Jan/2009:20:50:42 +0100] cupsdAuthorize: Authorized as root using Local
D [25/Jan/2009:20:50:42 +0100] CUPS-Get-Classes
D [25/Jan/2009:20:50:42 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:42 +0100] cupsdReadClient: 7 POST / HTTP/1.1
D [25/Jan/2009:20:50:42 +0100] cupsdAuthorize: Authorized as root using Local
D [25/Jan/2009:20:50:42 +0100] CUPS-Get-Default
D [25/Jan/2009:20:50:42 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:42 +0100] cupsdReadClient: 7 POST / HTTP/1.1
D [25/Jan/2009:20:50:42 +0100] cupsdAuthorize: Authorized as root using Local
D [25/Jan/2009:20:50:42 +0100] Get-Printer-Attributes ipp://localhost/printers/Stylus-Photo-RX620
D [25/Jan/2009:20:50:42 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:42 +0100] cupsdCloseClient: 11
D [25/Jan/2009:20:50:42 +0100] [Job 37] GPL Ghostscript 8.63: Set UseCIEColor for UseDeviceIndependentColor to work properly.
D [25/Jan/2009:20:50:42 +0100] [Job 37] Error: /ioerror in --showpage--
D [25/Jan/2009:20:50:42 +0100] [Job 37] Operand stack:
D [25/Jan/2009:20:50:42 +0100] [Job 37] 1   true
D [25/Jan/2009:20:50:42 +0100] [Job 37] Execution stack:
D [25/Jan/2009:20:50:42 +0100] [Job 37] %interp_exit   .runexec2   --nostringval--   --nostringval--   --nostringval--   2   %stopped_push   --nostringval--   --nostringval--   --nostringval--   false   1   %stopped_push   1905   1   3   %oparray_pop   1904   1   3   %oparray_pop   1888   1   3   %oparray_pop   1771   1   3   %oparray_pop   --nostringval--   %errorexec_pop   .runexec2   --nostringval--   --nostringval--   --nostringval--   2   %stopped_push   --nostringval--   1777   0   4   %oparray_pop   --nostringval--   --nostringval--
D [25/Jan/2009:20:50:42 +0100] [Job 37] Dictionary stack:
D [25/Jan/2009:20:50:42 +0100] [Job 37] --dict:1159/1684(ro)(G)--   --dict:0/20(G)--   --dict:70/200(L)--   --dict:0/10(L)--
D [25/Jan/2009:20:50:42 +0100] [Job 37] Current allocation mode is local
D [25/Jan/2009:20:50:42 +0100] [Job 37] Last OS error: 32
D [25/Jan/2009:20:50:42 +0100] [Job 37] GPL Ghostscript 8.63: Unrecoverable error, exit code 1
D [25/Jan/2009:20:50:42 +0100] [Job 37] GPL Ghostscript 8.63: ERROR -12 closing pdfwrite device. See gs/src/ierrors.h for code explanation.
E [25/Jan/2009:20:50:42 +0100] PID 6539 (/usr/lib/cups/filter/pstopdf) stopped with status 1!
D [25/Jan/2009:20:50:42 +0100] [Job 37] File 0 is complete.
E [25/Jan/2009:20:50:42 +0100] [Job 37] Job stopped due to filter errors.
I [25/Jan/2009:20:50:42 +0100] Saving subscriptions.conf...
I [25/Jan/2009:20:50:42 +0100] Saving subscriptions.conf...
D [25/Jan/2009:20:50:43 +0100] cupsdAcceptClient: 11 from localhost (Domain)
D [25/Jan/2009:20:50:43 +0100] [Job 37] Unloading...
D [25/Jan/2009:20:50:43 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [25/Jan/2009:20:50:43 +0100] cupsdReadClient: 11 POST / HTTP/1.1
D [25/Jan/2009:20:50:43 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:43 +0100] Get-Notifications /
D [25/Jan/2009:20:50:43 +0100] cupsdIsAuthorized: requesting-user-name="karlosek"
D [25/Jan/2009:20:50:43 +0100] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:43 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [25/Jan/2009:20:50:43 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:43 +0100] Get-Jobs ipp://localhost/jobs/
D [25/Jan/2009:20:50:43 +0100] [Job 37] Loading attributes...
D [25/Jan/2009:20:50:43 +0100] cupsdProcessIPPRequest: 12 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:43 +0100] cupsdReadClient: 7 POST / HTTP/1.1
D [25/Jan/2009:20:50:43 +0100] cupsdAuthorize: Authorized as root using Local
D [25/Jan/2009:20:50:43 +0100] CUPS-Get-Printers
D [25/Jan/2009:20:50:43 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:43 +0100] cupsdReadClient: 7 POST / HTTP/1.1
D [25/Jan/2009:20:50:43 +0100] cupsdAuthorize: Authorized as root using Local
D [25/Jan/2009:20:50:43 +0100] CUPS-Get-Classes
D [25/Jan/2009:20:50:43 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:43 +0100] cupsdCloseClient: 12
D [25/Jan/2009:20:50:43 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [25/Jan/2009:20:50:43 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [25/Jan/2009:20:50:43 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:43 +0100] Get-Notifications /
D [25/Jan/2009:20:50:43 +0100] cupsdIsAuthorized: requesting-user-name="karlosek"
D [25/Jan/2009:20:50:43 +0100] cupsdProcessIPPRequest: 12 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:43 +0100] cupsdReadClient: 7 POST / HTTP/1.1
D [25/Jan/2009:20:50:43 +0100] cupsdAuthorize: Authorized as root using Local
D [25/Jan/2009:20:50:43 +0100] CUPS-Get-Default
D [25/Jan/2009:20:50:43 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:43 +0100] cupsdReadClient: 7 POST / HTTP/1.1
D [25/Jan/2009:20:50:43 +0100] cupsdAuthorize: Authorized as root using Local
D [25/Jan/2009:20:50:43 +0100] Get-Printer-Attributes ipp://localhost/printers/Stylus-Photo-RX620
D [25/Jan/2009:20:50:43 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:43 +0100] cupsdCloseClient: 11
D [25/Jan/2009:20:50:43 +0100] cupsdCloseClient: 12
D [25/Jan/2009:20:50:47 +0100] cupsdAcceptClient: 11 from localhost (Domain)
D [25/Jan/2009:20:50:47 +0100] cupsdReadClient: 11 POST / HTTP/1.1
D [25/Jan/2009:20:50:47 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:47 +0100] Cancel-Subscription /
D [25/Jan/2009:20:50:47 +0100] cupsdIsAuthorized: requesting-user-name="karlosek"
I [25/Jan/2009:20:50:47 +0100] Saving subscriptions.conf...
D [25/Jan/2009:20:50:47 +0100] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:47 +0100] cupsdCloseClient: 11
D [25/Jan/2009:20:50:47 +0100] cupsdCloseClient: 10
D [25/Jan/2009:20:50:47 +0100] cupsdCloseClient: 7
D [25/Jan/2009:20:50:54 +0100] cupsdAcceptClient: 7 from localhost (Domain)
D [25/Jan/2009:20:50:54 +0100] cupsdReadClient: 7 POST /jobs/ HTTP/1.1
D [25/Jan/2009:20:50:54 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:54 +0100] Cancel-Job ipp://localhost/jobs/37
D [25/Jan/2009:20:50:54 +0100] cupsdIsAuthorized: requesting-user-name="karlosek"
I [25/Jan/2009:20:50:54 +0100] Saving subscriptions.conf...
I [25/Jan/2009:20:50:54 +0100] [Job 37] Canceled by "karlosek".
D [25/Jan/2009:20:50:54 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:54 +0100] cupsdAcceptClient: 10 from localhost (Domain)
D [25/Jan/2009:20:50:54 +0100] cupsdReadClient: 10 POST / HTTP/1.1
D [25/Jan/2009:20:50:54 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:54 +0100] Cancel-Subscription /
D [25/Jan/2009:20:50:54 +0100] cupsdIsAuthorized: requesting-user-name="karlosek"
I [25/Jan/2009:20:50:54 +0100] Saving subscriptions.conf...
D [25/Jan/2009:20:50:54 +0100] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:54 +0100] cupsdReadClient: 10 POST / HTTP/1.1
D [25/Jan/2009:20:50:54 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:54 +0100] Create-Printer-Subscription /
D [25/Jan/2009:20:50:54 +0100] cupsdCreateSubscription(con=0x7fa60b0ba040(10), uri="/")
D [25/Jan/2009:20:50:54 +0100] pullmethod="ippget"
D [25/Jan/2009:20:50:54 +0100] notify-lease-duration=86400
D [25/Jan/2009:20:50:54 +0100] notify-time-interval=0
D [25/Jan/2009:20:50:54 +0100] cupsdAddSubscription(mask=1798f, dest=(nil)(), job=(nil)(0), uri="(null)")
D [25/Jan/2009:20:50:54 +0100] Added subscription 61 for server
I [25/Jan/2009:20:50:54 +0100] Saving subscriptions.conf...
D [25/Jan/2009:20:50:54 +0100] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:54 +0100] cupsdReadClient: 10 POST / HTTP/1.1
D [25/Jan/2009:20:50:54 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:54 +0100] Get-Jobs ipp://localhost/jobs/
D [25/Jan/2009:20:50:54 +0100] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:54 +0100] cupsdReadClient: 10 POST / HTTP/1.1
D [25/Jan/2009:20:50:54 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:54 +0100] CUPS-Get-Printers
D [25/Jan/2009:20:50:54 +0100] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:54 +0100] cupsdReadClient: 10 POST / HTTP/1.1
D [25/Jan/2009:20:50:54 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:54 +0100] CUPS-Get-Printers
D [25/Jan/2009:20:50:54 +0100] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:54 +0100] cupsdReadClient: 10 POST / HTTP/1.1
D [25/Jan/2009:20:50:54 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:54 +0100] CUPS-Get-Classes
D [25/Jan/2009:20:50:54 +0100] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:54 +0100] cupsdReadClient: 10 POST / HTTP/1.1
D [25/Jan/2009:20:50:54 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:54 +0100] CUPS-Get-Default
D [25/Jan/2009:20:50:54 +0100] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:54 +0100] cupsdCloseClient: 10
D [25/Jan/2009:20:50:55 +0100] cupsdAcceptClient: 10 from localhost (Domain)
D [25/Jan/2009:20:50:55 +0100] cupsdReadClient: 10 POST / HTTP/1.1
D [25/Jan/2009:20:50:55 +0100] cupsdAuthorize: No authentication data provided.
D [25/Jan/2009:20:50:55 +0100] Get-Notifications /
D [25/Jan/2009:20:50:55 +0100] cupsdIsAuthorized: requesting-user-name="karlosek"
D [25/Jan/2009:20:50:55 +0100] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [25/Jan/2009:20:50:55 +0100] cupsdCloseClient: 10

Karel Ochman

  • Aktivní člen
  • *
  • Příspěvků: 227
    • http://www.leatherservice.wz.cz
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #20 kdy: 25 Ledna 2009, 22:15:10 »
tak to mám hotový. Nainstaloval jsem cups z JAUNTY a ono to fachčí. Díky všem za ochotu. LOCK

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po přechodu z 8.04 na 8.10 přestala fungovat tiskárna
« Odpověď #21 kdy: 25 Ledna 2009, 22:43:55 »
Zajímavý nápad. Dávám karmu  ;D
http://www.openstreetmap.org - mapy celého světa "wiki style"

 

Provoz zaštiťuje spolek OpenAlt.