Dobry den,
rozhodl jsem se prejit z ubuntu 8.04 na 9.04. Musim rict, ze jsem prekvapen. Vse slo az podezdrele hladce a samotna instalace vyresila problemy, jejichz reseni na vlastni ucet jsem dopredu planoval. Jediny problem, ktery se objevil a ktery mne docela zaskocil, se ukazal v souvislosti s ovladaci me graficke karty ATI Radeon XPRESS 200M. Zvykl jsem si, ze ubuntu mi vnucovalo nespravne "nesvobodne ovladace" pro tuto kartu (verze 9.04 ani zadne nesvobodne ovladace pro tuto kartu nenabizi), zvykl jsem si tedy stahovat "nesvobodne ovladace" rovnou od vyrobce a instalovat je prostym prikazem "sudo sh ./instalacni-soubor-stazeneho-ovladace". Ve verzi 9.04 ovsem vystup nekonci tlacitkem "Finish", nybrz nasledujicim vystupem:
$ sudo sh ./ati-driver-installer-9-3-x86.x86_64.run
[sudo] password for mk:
Created directory fglrx-install.ayADnE
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.593...
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.28-11-generic; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.ayADnE
Co bych mel udelat pro nainstalovani techto ovladacu?
Prikladam vystup lspci:
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
02:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
06:00.0 Ethernet controller: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter (rev a0)
a hwinfo --gfxcard:
09: PCI 105.0: 0300 VGA compatible controller (VGA)
[Created at pci.314]
UDI: /org/freedesktop/Hal/devices/pci_1002_5a62
Unique ID: ul7N.ki6N8VLN_JB
Parent ID: vSkL.dQFUNbiC_g9
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
SysFS BusID: 0000:01:05.0
Hardware Class: graphics card
Model: "ATI Radeon XPRESS 200M 5A62 (PCIE)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5a62 "Radeon XPRESS 200M 5A62 (PCIE)"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1402
Memory Range: 0xc0000000-0xcfffffff (rw,prefetchable)
I/O Ports: 0x9800-0x98ff (rw)
Memory Range: 0xfa8f0000-0xfa8fffff (rw,non-prefetchable)
Memory Range: 0xfa8c0000-0xfa8dffff (ro,prefetchable,disabled)
IRQ: 17 (8107 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00005A62sv00001043sd00001402bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: radeon
Driver Info #1:
XFree86 v4 Server Module: fglrx
3D Support: yes
Extensions: dri
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (PCI bridge)
Primary display adapter: #9
"glxinfo | grep direct" sice hlasi: "direct rendering: Yes", ale po spusteni 3D aplikace graficka karta rozhodne akcelerovane nevystupuje.
jeste xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Snad jsem poskytl vse potrebne.
Dekuji za kazdou pomoc.