============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
=> Grub0.97 is installed in the MBR of /dev/sdc and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> No boot loader is installed in the MBR of /dev/sdd
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sdb1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sdb1 has
1948286312 sectors, but according to the info from
fdisk, it has 1953525105 sectors.
Operating System:
Boot files/dirs:
sdc1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdc2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: _________________________________________________________________________
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 200,0 GB, 200 049 647 616 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 24 321, celkem 390 721 968 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Identifikátor disku: 0xe4dee4de
Partition Boot Start End Size Id System
/dev/sda1 * 63 390,700,799 390,700,737 7 HPFS/NTFS
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1 000,2 GB, 1 000 204 886 016 bajtů
hlav: 16, sektorů na stopu: 63, cylindrů: 1 938 021, celkem 1 953 525 168 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Identifikátor disku: 0x937b2fca
Partition Boot Start End Size Id System
/dev/sdb1 63 1,953,525,167 1,953,525,105 42 SFS
Drive: sdc ___________________ _____________________________________________________
Disk /dev/sdc: 41,1 GB, 41 110 142 976 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 4 998, celkem 80 293 248 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Identifikátor disku: 0x5be9a0db
Partition Boot Start End Size Id System
/dev/sdc1 * 63 76,903,154 76,903,092 83 Linux
/dev/sdc2 76,903,155 80,292,869 3,389,715 5 Extended
/dev/sdc5 76,903,218 80,292,869 3,389,652 82 Linux swap / Solaris
Drive: sdd ___________________ _____________________________________________________
Disk /dev/sdd: 1 015 MB, 1 015 808 000 bajtů
hlav: 32, sektorů na stopu: 63, cylindrů: 984, celkem 1 984 000 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Identifikátor disku: 0x00000000
Partition Boot Start End Size Id System
/dev/sdd1 249 1,983,743 1,983,495 6 FAT16
blkid -c /dev/null: ____________________________________________________________
/dev/sda1: UUID="02A0D0BCA0D0B6FF" TYPE="ntfs"
/dev/sdb1: UUID="E68C43218C42EC1D" LABEL="Data" TYPE="ntfs"
/dev/sdc1: UUID="b48c3595-6daa-476e-a891-d293f581479a" TYPE="ext3"
/dev/sdc5: TYPE="swap" UUID="e6811fe0-a94e-4e4a-8f74-4bfdb3dc1637"
/dev/sdd1: SEC_TYPE="msdos" UUID="E489-6AE2" TYPE="vfat"
=============================== "mount" output: ===============================
/dev/sdc1 on / type ext3 (rw,relatime,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
lrm on /lib/modules/2.6.28-15-generic/volatile type tmpfs (rw,mode=755)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ksonny/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ksonny)
/dev/sr0 on /media/cdrom0 type iso9660 (ro,nosuid,nodev,utf8,user=ksonny)
/dev/sdd1 on /media/disk type vfat (rw,nosuid,nodev,uhelper=hal,shortname=mixed,uid=1000,utf8,umask=077,flush)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /NoExecute=OptIn
=========================== sdc1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(
, info grub, update-grub(
# grub-install(
, grub-floppy(
,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b48c3595-6daa-476e-a891-d293f581479a ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=b48c3595-6daa-476e-a891-d293f581479a
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid b48c3595-6daa-476e-a891-d293f581479a
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b48c3595-6daa-476e-a891-d293f581479a ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid b48c3595-6daa-476e-a891-d293f581479a
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b48c3595-6daa-476e-a891-d293f581479a ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid b48c3595-6daa-476e-a891-d293f581479a
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b48c3595-6daa-476e-a891-d293f581479a ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid b48c3595-6daa-476e-a891-d293f581479a
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b48c3595-6daa-476e-a891-d293f581479a ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid b48c3595-6daa-476e-a891-d293f581479a
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
rootnoverify (hd0,0)
savedefault
makeactive
map (hd1) (hd0)
map (hd0) (hd1)
chainloader +1
=============================== sdc1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdc1 during installation
UUID=b48c3595-6daa-476e-a891-d293f581479a / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sdc5 during installation
UUID=e6811fe0-a94e-4e4a-8f74-4bfdb3dc1637 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdc1: Location of files loaded by Grub: ===================
.8GB: boot/grub/menu.lst
.8GB: boot/grub/stage2
.8GB: boot/initrd.img-2.6.28-11-generic
.9GB: boot/initrd.img-2.6.28-15-generic
.9GB: boot/vmlinuz-2.6.28-11-generic
.8GB: boot/vmlinuz-2.6.28-15-generic
.9GB: initrd.img
.8GB: initrd.img.old
.8GB: vmlinuz
.9GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sde sdf sdg