Od inštalácie Ubuntu mi internet šiel bez problémov, pravidelne som aktualizoval systém. Pred pár dňami bola u nás búrka a vypadol na chvíľu prúd. Od vtedy nejde internet. Keď pripojím ocinov notebook tak sa hneď pripojím a všetko funguje ako má. No na mojom PC nejde. Neviem či je odpálená sieťová karta, alebo len treba niečo nastaviť. Tu je výpis z /var/log/dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-14-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Wed Apr 15 18:59:16 UTC 2009 (Ubuntu 2.6.27-14.33-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[ 0.000000] RAMDISK: 3781f000 - 37fef8fd
[ 0.000000] ACPI: RSDP 000F8070, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFB0000, 0034 (r1 A M I OEMRSDT 2000826 MSFT 97)
[ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 2000826 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFB0450, 5319 (r1 4CDS2 4CDS2181 181 INTL 2002026)
[ 0.000000] ACPI: FACS 3FFC0000, 0040
[ 0.000000] ACPI: APIC 3FFB0390, 0078 (r1 A M I OEMAPIC 2000826 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 2000826 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFC0040, 0051 (r1 A M I AMI_OEM 2000826 MSFT 97)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00011000 - 00018000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c39e0] TEXT DATA BSS ==> [0000100000 - 00005c39e0]
[ 0.000000] #4 [003781f000 - 0037fef8fd] RAMDISK ==> [003781f000 - 0037fef8fd]
[ 0.000000] #5 [00005c4000 - 00005c7000] INIT_PG_TABLE ==> [00005c4000 - 00005c7000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0003ffb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffb0
[ 0.000000] On node 0 totalpages: 261951
[ 0.000000] free_area_init_node: node 0, pgdat c048c700, node_mem_map c1000240
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32400 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259647
[ 0.000000] Kernel command line: root=UUID=cb4b81b8-2c5d-4953-9c4f-82537121a078 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2394.000 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1024296k/1048256k available (2578k kernel code, 23120k reserved, 1162k data, 428k init, 130752k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0518000 ( 428 kB)
[ 0.004000] .data : 0xc0384a8a - 0xc04a7680 (1162 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0384a8a (2578 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.00 BogoMIPS (lpj=9576000)
[ 0.004022] Security Framework initialized
[ 0.004026] SELinux: Disabled at boot.
[ 0.004041] AppArmor: AppArmor initialized
[ 0.004047] Mount-cache hash table entries: 512
[ 0.004172] Initializing cgroup subsys ns
[ 0.004175] Initializing cgroup subsys cpuacct
[ 0.004178] Initializing cgroup subsys memory
[ 0.004189] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004191] CPU: L2 cache: 2048K
[ 0.004193] CPU: Physical Processor ID: 0
[ 0.004195] CPU: Processor Core ID: 0
[ 0.004199] using mwait in idle threads.
[ 0.004206] Checking 'hlt' instruction... OK.
[ 0.021549] ACPI: Core revision 20080609
[ 0.023191] ACPI: Checking initramfs for custom DSDT
[ 0.302268] ENABLING IO-APIC IRQs
[ 0.302447] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.342142] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
[ 0.344021] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4788.24 BogoMIPS (lpj=9576496)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.428456] CPU1: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
[ 0.428473] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.432047] Brought up 2 CPUs
[ 0.432050] Total of 2 processors activated (9576.24 BogoMIPS).
[ 0.432068] CPU0 attaching sched-domain:
[ 0.432071] domain 0: span 0-1 level MC
[ 0.432073] groups: 0 1
[ 0.432078] CPU1 attaching sched-domain:
[ 0.432080] domain 0: span 0-1 level MC
[ 0.432082] groups: 1 0
[ 0.432149] net_namespace: 840 bytes
[ 0.432149] Booting paravirtualized kernel on bare hardware
[ 0.432265] Time: 7:30:11 Date: 07/05/09
[ 0.432288] NET: Registered protocol family 16
[ 0.432304] EISA bus registered
[ 0.432304] ACPI: bus type pci registered
[ 0.432304] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.432304] PCI: Not using MMCONFIG.
[ 0.432304] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
[ 0.432304] PCI: Using configuration type 1 for base access
[ 0.432716] ACPI: EC: Look up EC in DSDT
[ 0.443024] ACPI: Interpreter enabled
[ 0.443030] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.443044] ACPI: Using IOAPIC for interrupt routing
[ 0.443094] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.447886] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.447889] PCI: Using MMCONFIG for extended config space
[ 0.456067] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.456091] PCI: 0000:00:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
[ 0.456549] pci 0000:00:01.0: supports D1
[ 0.456623] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.456628] pci 0000:00:02.0: PME# disabled
[ 0.456677] PCI: 0000:00:0f.0 reg 10 io port: [cc00, cc07]
[ 0.456684] PCI: 0000:00:0f.0 reg 14 io port: [c880, c883]
[ 0.456692] PCI: 0000:00:0f.0 reg 18 io port: [c800, c807]
[ 0.456699] PCI: 0000:00:0f.0 reg 1c io port: [c480, c483]
[ 0.456706] PCI: 0000:00:0f.0 reg 20 io port: [c400, c40f]
[ 0.456713] PCI: 0000:00:0f.0 reg 24 io port: [c000, c0ff]
[ 0.456799] PCI: 0000:00:0f.1 reg 20 io port: [fc00, fc0f]
[ 0.456897] PCI: 0000:00:10.0 reg 20 io port: [b480, b49f]
[ 0.456934] pci 0000:00:10.0: supports D1
[ 0.456935] pci 0000:00:10.0: supports D2
[ 0.456937] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.456942] pci 0000:00:10.0: PME# disabled
[ 0.456993] PCI: 0000:00:10.1 reg 20 io port: [b800, b81f]
[ 0.457030] pci 0000:00:10.1: supports D1
[ 0.457031] pci 0000:00:10.1: supports D2
[ 0.457033] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457038] pci 0000:00:10.1: PME# disabled
[ 0.457089] PCI: 0000:00:10.2 reg 20 io port: [b880, b89f]
[ 0.457126] pci 0000:00:10.2: supports D1
[ 0.457127] pci 0000:00:10.2: supports D2
[ 0.457129] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457133] pci 0000:00:10.2: PME# disabled
[ 0.457185] PCI: 0000:00:10.3 reg 20 io port: [bc00, bc1f]
[ 0.457222] pci 0000:00:10.3: supports D1
[ 0.457223] pci 0000:00:10.3: supports D2
[ 0.457225] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457230] pci 0000:00:10.3: PME# disabled
[ 0.457268] PCI: 0000:00:10.4 reg 10 32bit mmio: [fe8ffc00, fe8ffcff]
[ 0.457334] pci 0000:00:10.4: supports D1
[ 0.457335] pci 0000:00:10.4: supports D2
[ 0.457337] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457342] pci 0000:00:10.4: PME# disabled
[ 0.457548] PCI: 0000:00:12.0 reg 10 io port: [b000, b0ff]
[ 0.457555] PCI: 0000:00:12.0 reg 14 32bit mmio: [fe8ff800, fe8ff8ff]
[ 0.457609] pci 0000:00:12.0: supports D1
[ 0.457610] pci 0000:00:12.0: supports D2
[ 0.457612] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457617] pci 0000:00:12.0: PME# disabled
[ 0.457825] PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
[ 0.457832] PCI: 0000:01:00.0 reg 14 io port: [d000, d0ff]
[ 0.457838] PCI: 0000:01:00.0 reg 18 32bit mmio: [fe9e0000, fe9effff]
[ 0.457857] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe9c0000, fe9dffff]
[ 0.457888] pci 0000:01:00.0: supports D1
[ 0.457889] pci 0000:01:00.0: supports D2
[ 0.457913] PCI: 0000:01:00.1 reg 10 32bit mmio: [d0000000, dfffffff]
[ 0.457919] PCI: 0000:01:00.1 reg 14 32bit mmio: [fe9f0000, fe9fffff]
[ 0.457963] pci 0000:01:00.1: supports D1
[ 0.457964] pci 0000:01:00.1: supports D2
[ 0.458010] PCI: bridge 0000:00:01.0 io port: [d000, dfff]
[ 0.458014] PCI: bridge 0000:00:01.0 32bit mmio: [fe900000, fe9fffff]
[ 0.458019] PCI: bridge 0000:00:01.0 32bit mmio pref: [c0000000, dfffffff]
[ 0.458081] PCI: bridge 0000:00:02.0 32bit mmio pref: [fdf00000, fdffffff]
[ 0.458128] PCI: 0000:03:07.0 reg 10 io port: [e800, e8ff]
[ 0.458136] PCI: 0000:03:07.0 reg 14 32bit mmio: [feaffc00, feaffcff]
[ 0.458164] PCI: 0000:03:07.0 reg 30 32bit mmio: [feae0000, feaeffff]
[ 0.458191] pci 0000:03:07.0: supports D1
[ 0.458192] pci 0000:03:07.0: supports D2
[ 0.458194] pci 0000:03:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.458199] pci 0000:03:07.0: PME# disabled
[ 0.458235] pci 0000:00:13.1: transparent bridge
[ 0.458239] PCI: bridge 0000:00:13.1 io port: [e000, efff]
[ 0.458243] PCI: bridge 0000:00:13.1 32bit mmio: [fea00000, feafffff]
[ 0.458266] bus 00 -> node 0
[ 0.458272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.458485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.458565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.458764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.472102] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.472125] PCI: 0000:80:01.0 reg 10 64bit mmio: [febfc000, febfffff]
[ 0.472130] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[ 0.472134] pci 0000:80:01.0: PME# disabled
[ 0.472179] bus 80 -> node 0
[ 0.472184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.472606] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.472606] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.472606] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.472606] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.472632] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.472764] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.472896] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.473028] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.473092] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - DF, should be D2 [20080609]
[ 0.473092] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.473092] pnp: PnP ACPI init
[ 0.473092] ACPI: bus type pnp registered
[ 0.476835] pnp: PnP ACPI: found 14 devices
[ 0.476835] ACPI: ACPI bus type pnp unregistered
[ 0.476835] PnPBIOS: Disabled by ACPI PNP
[ 0.476835] PCI: Using ACPI for IRQ routing
[ 0.484038] NET: Registered protocol family 8
[ 0.484040] NET: Registered protocol family 20
[ 0.484053] NetLabel: Initializing
[ 0.484053] NetLabel: domain hash size = 128
[ 0.484053] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.484058] NetLabel: unlabeled traffic allowed by default
[ 0.484825] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.484827] actual entries 65620
[ 0.484908] AppArmor: AppArmor Filesystem Enabled
[ 0.484924] ACPI: RTC can wake from S4
[ 0.492049] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.492052] system 00:06: ioport range 0x3e0-0x3e7 has been reserved
[ 0.492054] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.492056] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.492059] system 00:06: ioport range 0x400-0x41f has been reserved
[ 0.492062] system 00:06: iomem range 0xfecc0000-0xfecc0fff has been reserved
[ 0.492068] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.492071] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.492077] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.492082] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.492085] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.492087] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.492090] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.492092] system 00:0c: iomem range 0xfeb00000-0xffffffff could not be reserved
[ 0.527047] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.527051] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.527056] pci 0000:00:01.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.527061] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
[ 0.527067] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.527069] pci 0000:00:02.0: IO window: disabled
[ 0.527075] pci 0000:00:02.0: MEM window: disabled
[ 0.527079] pci 0000:00:02.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.527087] pci 0000:00:13.1: PCI bridge, secondary bus 0000:03
[ 0.527091] pci 0000:00:13.1: IO window: 0xe000-0xefff
[ 0.527096] pci 0000:00:13.1: MEM window: 0xfea00000-0xfeafffff
[ 0.527100] pci 0000:00:13.1: PREFETCH window: 0x00000050000000-0x000000500fffff
[ 0.527116] pci 0000:00:01.0: setting latency timer to 64
[ 0.527126] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.527131] pci 0000:00:02.0: setting latency timer to 64
[ 0.527138] pci 0000:00:13.1: setting latency timer to 64
[ 0.527142] bus: 00 index 0 io port: [0, ffff]
[ 0.527144] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.527145] bus: 01 index 0 io port: [d000, dfff]
[ 0.527147] bus: 01 index 1 mmio: [fe900000, fe9fffff]
[ 0.527149] bus: 01 index 2 mmio: [c0000000, dfffffff]
[ 0.527151] bus: 01 index 3 mmio: [0, 0]
[ 0.527153] bus: 02 index 0 mmio: [0, 0]
[ 0.527154] bus: 02 index 1 mmio: [0, 0]
[ 0.527156] bus: 02 index 2 mmio: [fdf00000, fdffffff]
[ 0.527158] bus: 02 index 3 mmio: [0, 0]
[ 0.527160] bus: 03 index 0 io port: [e000, efff]
[ 0.527162] bus: 03 index 1 mmio: [fea00000, feafffff]
[ 0.527163] bus: 03 index 2 mmio: [50000000, 500fffff]
[ 0.527165] bus: 03 index 3 io port: [0, ffff]
[ 0.527167] bus: 03 index 4 mmio: [0, ffffffff]
[ 0.527169] bus: 80 index 0 io port: [0, ffff]
[ 0.527170] bus: 80 index 1 mmio: [0, ffffffff]
[ 0.527177] NET: Registered protocol family 2
[ 0.540074] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.540273] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.540648] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.540864] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.540867] TCP reno registered
[ 0.548111] NET: Registered protocol family 1
[ 0.548211] checking if image is initramfs... it is
[ 1.024521] Switched to high resolution mode on CPU 1
[ 1.028055] Switched to high resolution mode on CPU 0
[ 1.120466] Freeing initrd memory: 8002k freed
[ 1.121479] audit: initializing netlink socket (disabled)
[ 1.121505] type=2000 audit(1246779011.120:1): initialized
[ 1.125720] highmem bounce pool size: 64 pages
[ 1.125725] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.127577] VFS: Disk quotas dquot_6.5.1
[ 1.127650] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.127739] msgmni has been set to 1761
[ 1.127844] io scheduler noop registered
[ 1.127846] io scheduler anticipatory registered
[ 1.127848] io scheduler deadline registered
[ 1.127858] io scheduler cfq registered (default)
[ 1.127875] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.127961] pci 0000:01:00.0: Boot video device
[ 1.128076] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.128124] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.128188] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.128219] pci_express 0000:00:02.0:pcie01: allocate port service
[ 1.128250] pci_express 0000:00:02.0:pcie02: allocate port service
[ 1.128284] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.130952] aer 0000:00:02.0:pcie01: service driver aer loaded
[ 1.131124] isapnp: Scanning for PnP cards...
[ 1.485091] isapnp: No Plug & Play device found
[ 1.510295] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.510408] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.511007] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.512335] brd: module loaded
[ 1.512388] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.512482] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.512485] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.512613] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.516581] mice: PS/2 mouse device common for all mice
[ 1.516682] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.516713] rtc0: alarms up to one year, y3k
[ 1.516807] EISA: Probing bus 0 at eisa.0
[ 1.516846] EISA: Detected 0 cards.
[ 1.516849] cpuidle: using governor ladder
[ 1.516851] cpuidle: using governor menu
[ 1.517281] TCP cubic registered
[ 1.517306] Using IPI No-Shortcut mode
[ 1.517439] registered taskstats version 1
[ 1.517556] Magic number: 1:598:520
[ 1.517652] rtc_cmos 00:07: setting system clock to 2009-07-05 07:30:12 UTC (1246779012)
[ 1.517655] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.517657] EDD information not available.
[ 1.517874] Freeing unused kernel memory: 428k freed
[ 1.517905] Write protecting the kernel text: 2580k
[ 1.517926] Write protecting the kernel read-only data: 940k
[ 1.538458] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.648058] fuse init (API version 7.9)
[ 1.712476] processor ACPI0007:00: registered as cooling_device0
[ 1.712481] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 1.816559] processor ACPI0007:01: registered as cooling_device1
[ 1.816563] ACPI: Processor [CPU2] (supports 16 throttling states)
[ 2.066700] Floppy drive(s): fd0 is 1.44M
[ 2.085192] FDC 0 is a post-1991 82077
[ 2.085332] No dock devices found.
[ 2.098115] SCSI subsystem initialized
[ 2.118272] libata version 3.00 loaded.
[ 2.126578] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.126622] pata_acpi 0000:00:0f.0: PCI INT B disabled
[ 2.130993] sata_via 0000:00:0f.0: version 2.3
[ 2.131001] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.131027] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 2.133589] scsi0 : sata_via
[ 2.141300] scsi1 : sata_via
[ 2.142718] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21
[ 2.142721] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21
[ 2.174410] usbcore: registered new interface driver usbfs
[ 2.174432] usbcore: registered new interface driver hub
[ 2.174462] usbcore: registered new device driver usb
[ 2.176371] USB Universal Host Controller Interface driver v3.0
[ 2.204662] 8139too Fast Ethernet driver 0.9.28
[ 2.207151] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.215125] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.352516] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.556011] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.556197] pata_via 0000:00:0f.1: version 0.3.3
[ 2.556308] scsi2 : pata_via
[ 2.556539] scsi3 : pata_via
[ 2.558026] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.558028] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.721983] ata3.01: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133
[ 2.721986] ata3.01: 320173056 sectors, multi 16: LBA48
[ 2.737804] ata3.01: configured for UDMA/133
[ 2.900428] ata4.00: ATAPI: CD-W524E, 1.0C, max UDMA/33
[ 2.916299] ata4.00: configured for UDMA/33
[ 2.916388] scsi 2:0:1:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5
[ 2.918969] scsi 3:0:0:0: CD-ROM TEAC CD-W524E 1.0C PQ: 0 ANSI: 5
[ 2.920539] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.920549] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.920585] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 2.920614] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b480
[ 2.920744] usb usb1: configuration #1 chosen from 1 choice
[ 2.920767] hub 1-0:1.0: USB hub found
[ 2.920774] hub 1-0:1.0: 2 ports detected
[ 2.925186] scsi 2:0:1:0: Attached scsi generic sg0 type 0
[ 2.925215] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.128578] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 3.128588] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.128611] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 3.128639] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800
[ 3.128715] usb usb2: configuration #1 chosen from 1 choice
[ 3.128738] hub 2-0:1.0: USB hub found
[ 3.128749] hub 2-0:1.0: 2 ports detected
[ 3.240008] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 3.336328] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.336335] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.336356] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 3.336376] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880
[ 3.336448] usb usb3: configuration #1 chosen from 1 choice
[ 3.336472] hub 3-0:1.0: USB hub found
[ 3.336480] hub 3-0:1.0: 2 ports detected
[ 3.415705] usb 1-1: configuration #1 chosen from 1 choice
[ 3.528008] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 3.544360] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.544367] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 3.544389] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 3.544416] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00
[ 3.544488] usb usb4: configuration #1 chosen from 1 choice
[ 3.544510] hub 4-0:1.0: USB hub found
[ 3.544516] hub 4-0:1.0: 2 ports detected
[ 3.691714] usb 1-2: configuration #1 chosen from 1 choice
[ 3.752431] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.752445] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.752470] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 3.752495] ehci_hcd 0000:00:10.4: debug port 1
[ 3.752508] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfe8ffc00
[ 3.764007] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.764070] usb usb5: configuration #1 chosen from 1 choice
[ 3.764092] hub 5-0:1.0: USB hub found
[ 3.764098] hub 5-0:1.0: 8 ports detected
[ 3.872038] usb 1-1: USB disconnect, address 2
[ 3.972518] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.972772] eth0: VIA Rhine II at 0xfe8ff800, 00:19:66:6b:91:a7, IRQ 23.
[ 3.973482] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 3.973731] 8139too 0000:03:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.974476] eth1: RealTek RTL8139 at 0xe800, 00:e0:4c:49:91:07, IRQ 16
[ 3.974479] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.980596] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.004034] usb 1-2: USB disconnect, address 3
[ 4.009465] Driver 'sd' needs updating - please use bus_type methods
[ 4.009552] sd 2:0:1:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
[ 4.009565] sd 2:0:1:0: [sda] Write Protect is off
[ 4.009567] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.009587] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.009641] sd 2:0:1:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
[ 4.009653] sd 2:0:1:0: [sda] Write Protect is off
[ 4.009655] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.009675] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.009678] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.028195] sda1 sda2 < sda5 >
[ 4.051996] sd 2:0:1:0: [sda] Attached SCSI disk
[ 4.055480] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 4.055484] Uniform CD-ROM driver Revision: 3.20
[ 4.055566] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.296013] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 4.429453] usb 5-2: configuration #1 chosen from 1 choice
[ 4.436884] usbcore: registered new interface driver hiddev
[ 4.436886] usbcore: registered new interface driver libusual
[ 4.442332] Initializing USB Mass Storage driver...
[ 4.676009] usb 1-1: new low speed USB device using uhci_hcd and address 4
[ 4.851810] usb 1-1: configuration #1 chosen from 1 choice
[ 4.855629] input: Western Digital My Book as /devices/pci0000:00/0000:00:10.4/usb5/5-2/5-2:1.1/input/input2
[ 4.855663] input,hidraw0: USB HID v1.10 Device [Western Digital My Book ] on usb-0000:00:10.4-2
[ 4.855735] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.855800] usb-storage: device found at 3
[ 4.855802] usb-storage: waiting for device to settle before scanning
[ 4.868897] input: KYE Genius USB Wheel Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input3
[ 4.869105] input,hidraw1: USB HID v1.00 Mouse [KYE Genius USB Wheel Mouse] on usb-0000:00:10.0-1
[ 4.869133] usbcore: registered new interface driver usbhid
[ 4.869136] usbhid: v2.6:USB HID core driver
[ 4.869139] usbcore: registered new interface driver usb-storage
[ 4.869143] USB Mass Storage support registered.
[ 4.962625] kjournald starting. Commit interval 5 seconds
[ 4.962630] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.815083] udevd version 124 started
[ 9.868219] usb-storage: device scan complete
[ 9.868692] scsi 4:0:0:0: Direct-Access WD 3200AAV External 1.65 PQ: 0 ANSI: 4
[ 9.869671] sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 9.871378] sd 4:0:0:0: [sdb] Write Protect is off
[ 9.871381] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 9.871383] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 9.872048] sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 9.872795] sd 4:0:0:0: [sdb] Write Protect is off
[ 9.872797] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 9.872799] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 9.872802] sdb:<6>Linux agpgart interface v0.103
[ 10.283388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.314398] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.350964] agpgart: Detected VIA PT880 Ultra chipset
[ 10.354013] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 10.402852] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 10.428029] ACPI: Power Button (FF) [PWRF]
[ 10.428128] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 10.459772] ACPI: Sleep Button (CM) [SLPB]
[ 10.459840] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 10.492020] ACPI: Power Button (CM) [PWRB]
[ 10.717228] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.717340] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 10.768233] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.873840] [fglrx] Maximum main memory to use for locked dma buffers: 926 MBytes.
[ 10.874118] [fglrx] vendor: 1002 device: 4150 count: 1
[ 10.874975] [fglrx] ioport: bar 1, base 0xd000, size: 0x100
[ 10.874988] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.876375] [fglrx] PAT is enabled successfully!
[ 10.876404] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 11.039876] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 11.388488] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.388521] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 11.388526] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 11.421917] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 12.790680] lp0: using parport0 (interrupt-driven).
[ 13.435430] EXT3 FS on sda1, internal journal
[ 14.527246] type=1505 audit(1246779025.834:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4117
[ 14.663549] type=1505 audit(1246779025.970:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4122
[ 14.663759] type=1505 audit(1246779025.970:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4122
[ 14.807654] ip_tables: (C) 2000-2006 Netfilter Core Team
Téma: Nejde Internet na Ubuntu 8.10 (Přečteno 1288 krát)
