Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Starting up problém  (Přečteno 1923 krát)

Isfio

  • Návštěvník
  • Příspěvků: 3
Starting up problém
« kdy: 23 Července 2009, 16:33:21 »
Zdar.

Potrebujem poradiť s problémom, inštalácia Ubuntu.
Všetko som nainštaloval. windows XP ostal na jednom HDD, drive C:, Ubuntu som dal na samostatný disk, drive D:, partícia č. 1 ext 3, na druhej je swap.

Keď zapnem PC, tak naskočí Grub, vyberiem 1. možsnoť - Ubuntu generic, a vidím text:
Boot from hdd0,0, ext 3 .....
Starting up

bliká kurzor a nič. Nič sa nedej, systém nanabehne.

Skúšal som taká okľuku, vložil som  Ubuntu CD, nabehne Ubuntu menu, je tam taká posledná možnosť, Bootovať z prvého HDD.. keď toto vyberiem, tak systém sa nabootuje z hdd akokeby bolo všetko v pohode. Tomu celkom nechápem, prečo Ubuntu nanabootuje bez toho, aby som tam dával inštalačné CD.

Keď som inštaloval systém, tak v sekcii Partition, som vybral druhú možsnoť . Install on new drive, na samostatný disk. Nedával som inštalovať ako dual boot, asi preto ani nefunguje, ak v Grube si vyberiem bootovať Windows.. vypíše chybu: Cant find C:\Windows\System32 ....atď.

Môže niekto poradiť v čom je asi problém?

Vlado.

oyankee

  • Host
Re: Starting up problém
« Odpověď #1 kdy: 23 Července 2009, 16:56:34 »
Možná se pletu, spěchám, ale pokud to Ubuntu je na druhém disku a na první partišně, asi by tam mělo být hd1,0
zkuste to změnit nejdříve rovnou v grubu pomocí , tuším "e",
pokud to pomůže natrvalo se to dá zapsat v souboru /boot/grub/menu.lst

Isfio

  • Návštěvník
  • Příspěvků: 3
Re: Starting up problém
« Odpověď #2 kdy: 23 Července 2009, 19:00:15 »
ja som inštaloval Linux na 1. disk, sda, alebo hd0,0 - podľa Grub číslovania.

to, že disk s windowsom sa javí ako C:, to ja asi kozmetická finta.. windows je až na treťom disku, čiže asi hd2,0

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: Starting up problém
« Odpověď #3 kdy: 23 Července 2009, 19:10:27 »
Zkus sem dát víc informací, nejlépe asi pomocí boot_info_script, stáhni třeba zde, a spusť pomocí
Kód: [Vybrat]
sudo bash <cesta_ke_skriptu>/boot_info_script*.sh Výsledky RESULTS.txt dej pak sem.
http://www.openstreetmap.org - mapy celého světa "wiki style"

Milhouse

  • Moderátor
  • Závislák
  • ***
  • Příspěvků: 5726
Re: Starting up problém
« Odpověď #4 kdy: 24 Července 2009, 13:37:32 »
Pokud máte ATA a SATA disk, budete asi muset přemapovat disk.
Na zkoušku si při bootu editujte Grub(klávesa "e") a přepište to na (hd 1,0). Neuloží se to, je to na zkoušku.

N. Á. V. O. D. Y.
 "...naše práce není vidět, ale je důležitá!"

Isfio

  • Návštěvník
  • Příspěvků: 3
Re: Starting up problém
« Odpověď #5 kdy: 24 Července 2009, 17:44:22 »
============================= Boot Info Summary: ==============================

 => Grub0.97 is installed in the MBR of /dev/sda and looks on the same drive
    in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
 => Windows is installed in the MBR of /dev/sdb
 => Windows is installed in the MBR of /dev/sdc

sda1: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 9.04
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sda2: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files/dirs:   

sdc1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files/dirs:   /boot.ini /bootmgr /Boot/BCD /ntldr /NTDETECT.COM

sdc2: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files/dirs:   

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disk /dev/sda: 123.5 GB, 123522416640 bytes
255 heads, 63 sectors/track, 15017 cylinders, total 241254720 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x28832882

Partition  Boot         Start           End          Size  Id System

/dev/sda1    *             63    29,302,559    29,302,497  83 Linux
/dev/sda2          29,302,560    41,013,944    11,711,385  82 Linux swap / Solaris


Drive: sdb ___________________ _____________________________________________________

Disk /dev/sdb: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x04ea1d24

Partition  Boot         Start           End          Size  Id System

/dev/sdb1                  63   625,137,344   625,137,282   7 HPFS/NTFS


Drive: sdc ___________________ _____________________________________________________

Disk /dev/sdc: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x063d9d1c

Partition  Boot         Start           End          Size  Id System

/dev/sdc1    *             63   225,279,494   225,279,432   7 HPFS/NTFS
/dev/sdc2         225,279,495 1,250,258,624 1,024,979,130   7 HPFS/NTFS


blkid -c /dev/null: ____________________________________________________________

/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561" TYPE="ext3"
/dev/sda2: TYPE="swap" UUID="7faa999a-03d6-437c-9ed3-850803537ca3"
/dev/sdb1: UUID="84248A69248A5DD4" LABEL="300 GB" TYPE="ntfs"
/dev/sdc1: UUID="D0A4A55CA4A54636" LABEL="Windows" TYPE="ntfs"
/dev/sdc2: UUID="0688063C88062B2F" LABEL="Disc D" TYPE="ntfs"

=============================== "mount" output: ===============================

proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
rootfs on / type rootfs (rw)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /media/disk type ext3 (rw,nosuid,nodev,uhelper=hal)


=========================== sda1/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 9.04, kernel 2.6.28-11-generic
uuid      404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561 ro quiet splash
initrd      /boot/initrd.img-2.6.28-11-generic
quiet

title      Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid      404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561 ro  single
initrd      /boot/initrd.img-2.6.28-11-generic

title      Ubuntu 9.04, memtest86+
uuid      404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdc1
title      Windows Vista (loader)
rootnoverify   (hd2,0)
savedefault
makeactive
map      (hd0) (hd2)
map      (hd2) (hd0)
chainloader   +1


=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda1 during installation
UUID=404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561 /               ext3    relatime,errors=remount-ro 0       1
# swap was on /dev/sda2 during installation
UUID=7faa999a-03d6-437c-9ed3-850803537ca3 none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0

=================== sda1: Location of files loaded by Grub: ===================


   9.8GB: boot/grub/menu.lst
   9.8GB: boot/grub/stage2
   9.6GB: boot/initrd.img-2.6.28-11-generic
   9.5GB: boot/vmlinuz-2.6.28-11-generic
   9.6GB: initrd.img
   9.5GB: vmlinuz

================================ sdc1/boot.ini: ================================

;

;Warning: Boot.ini is used on Windows XP and earlier operating systems.

;Warning: Use BCDEDIT.exe to modify Windows Vista boot options.

;

[boot loader]

timeout=30

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /NOEXECUTE=OPTIN /FASTDETECT

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: Starting up problém
« Odpověď #6 kdy: 26 Července 2009, 20:53:51 »
Myslím si, že to nebude problém s Grubem, hlásil by chybu. Ani v tom výpisu žádný problém s Grubem nevidím. Teď je potřeba zjistit, proč nenajede systém - při úvodní obrazovce najeď na Ubuntu, zmáčkni 'e' (=edit) a změň řádek
Kód: [Vybrat]
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561 ro quiet splash na
Kód: [Vybrat]
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=404bb8cf-1ab5-4cf3-9fd3-26b40f0c9561 ro Enter, 'b' (=boot).

?Vypíše to pak víc informací než
Boot from hdd0,0, ext 3 .....
Starting up
http://www.openstreetmap.org - mapy celého světa "wiki style"

 

Provoz zaštiťuje spolek OpenAlt.