Tuning xorg.conf/ Znatelné zrychlení 2D i 3D(patrně jen pro Ati)

[Roman Vacho]

Pokud nevíte které řádky a volby použít, nedělejte nic!
Některé z voleb v xorgu kdysi přidával Ati instalátor. Tak proč to nezkusit.

Vyzkoušeno pro grafickou kartu Ati X1250 na Mandrivě 2009.1 s CRT monitorem, ale není důvod proč by to nemělo jít na Ubuntu . Vše děláte na vlastní nebezpečí! Zálohujte původní xorg.conf! (cp /etc/X11/xorg.conf /home/user/xorg.conf.bak) Obnova je naopak a s právy admina.

Verze ovladače mám 6.12.2.
Kernel 2.6.29.6 32bit.

Můj xorg.conf

Kód: [Vybrat]

Section "ServerFlags"
    #DontZap # disable <Ctrl><Alt><BS> (server abort)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "glx" # 3D layer
    Load "dri" # direct rendering
EndSection

Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "cz"
    Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/input/mice"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Nokia"
    ModelName "Nokia 445Xi"
    HorizSync 30.0-102.0
    VertRefresh 50.0-120.0
    Modeline "1280x1024_85.00"  159.36  1280 1376 1512 1744  1024 1025 1028 1075  -HSync +Vsync
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
   
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection

Section "Device"
    Identifier "device1"
    VendorName "ATI Technologies Inc"
    BoardName "ATI Radeon X1950 and earlier"
    Driver "ati"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
   
    Subsection "Display"
        Depth 8
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 15
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 16
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 24
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    Screen "screen1"
EndSection

Zajímá nás sekce Module a Device. Zkuste si některé z těch řádků přidat nebo to i zkonzultovat se strýčkem G.
Toto je výchozí konfigurace v Mandrivě a grafická karta mi s Compizem a jeho náročnějšími efekty přestala trhat a jede plynule. Ve 3D se mi zvedl znatelně výkon (i když měřák ty změny moc neukazuje) a konečně pařím Tremulous plynule i v náročných scénách  I neobjektivní glxgears dává 2x tolik FPS.

Co se týče negativních věcí, ty zatím po 2 dnech testů nepozoruji žádné.
Pařím Tremulous i s Compizem a zatím mi to ani jednou nevyskočilo do okna 

Máte-li CRT monitor, možná by rádi vaše oči 85Hz nebo 100Hz. Jak na to? Např.:
gtf 1600 1200 85
Vygenerují se vám hodnoty. Řádek začínající Modeline vložte do xorgu do sekce Monitor.
Modeline "1600x1200_85.00"  234.76  1600 1720 1896 2192  1200 1201 1204 1260  -HSync +Vsync

[Lord Diamont dogg]

Vďaka, mne to dosť pomohlo (o cca 80%). Zrejme mám však nejak blbo nastavený xorg.conf pretože stále mi to ide dosť zle. V Compize ide glxgears cca 600 fps, v Metacity tak 800. Môjmu zmámemu to na rovnakom kompe dáva v Metacity 1500. Neprišli sme na to ako to upraviť, keby niekoho napadlo ako to zlepšiť bol by som rád.

Moje xorg.conf:

Kód: [Vybrat]

Section "ServerLayout"
Identifier     "aticonfig Layout"
Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
Load  "glx"
EndSection

Section "ServerFlags"
Option     "Xinerama" "off"
Option     "DontZap" "False"
EndSection

Section "Monitor"
Identifier   "aticonfig-Monitor[0]-0"
Option     "VendorName" "ATI Proprietary Driver"
Option     "ModelName" "Generic Autodetecting Monitor"
Option     "DPMS" "true"
EndSection

Section "Device"
Identifier  "aticonfig-Device[0]-0"
Driver      "fglrx"
BusID       "PCI:1:5:0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device     "aticonfig-Device[0]-0"
Monitor    "aticonfig-Monitor[0]-0"
DefaultDepth     24
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection

Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "glx" # 3D layer
    Load "dri" # direct rendering
EndSection


[Roman Vacho]

Máte stejné grafické karty? Operační systém?
Jaký máš monitor? CRT nebo LCD?

Jinak máš tam zbytečně 2x, že to má načíst modul GLX. Čili ten řádek Modules se samotným GLX můžeš klidně smazat.A ten V4L nevím jestli využiješ.
Jaké máš distro? Co znamená 80%

Mohl by jsi mi napsat svůj původní xorg.conf, pakliže jej ještě máš? Instaloval jsi nesvobodné ovladače grafiky a mně by zajímalo co ony přidávaj do xorgu.

[Lord Diamont dogg]

Systém máme rovnaký, grafické karty taktiež. Akurát, že on má ešte menšiu ramku, teda mne by to ešte malo ísť ešte o trochu lepšie.
Monitor je LCD.
V popiske mám detaily kompu, distro je ubuntu 9.04

Zvýšenie o 80% že keď mi teraz dáva 600 fps tak predtým mi to šlo na cca 400 v compize a asi o 200 viac v metacity.

Najstaršie xorg.conf čo som našiel, malo by byť bez zmien:

Kód: [Vybrat]

Section "ServerLayout"
Identifier     "aticonfig Layout"
Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
EndSection

Section "Monitor"
Identifier   "Configured Monitor"
EndSection

Section "Monitor"
Identifier   "aticonfig-Monitor[0]-0"
Option     "VendorName" "ATI Proprietary Driver"
Option     "ModelName" "Generic Autodetecting Monitor"
Option     "DPMS" "true"
EndSection

Section "Device"
Identifier  "Configured Video Device"
EndSection

Section "Device"
Identifier  "aticonfig-Device[0]-0"
Driver      "fglrx"
BusID       "PCI:1:5:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device     "Configured Video Device"
Monitor    "Configured Monitor"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device     "aticonfig-Device[0]-0"
Monitor    "aticonfig-Monitor[0]-0"
DefaultDepth     24
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection

xorg.conf-originál:

Kód: [Vybrat]

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

[Lord Diamont dogg]

upravil som to podľa pokynov ale nie je tam žiadna zmena...stále dáva približne rovnaké hodnoty

[Roman Vacho]

Můžeš přiložit ještě z var/log/Xorg.0.log ?

Co se týče u mě zvednutí výkonu ono to probíhá tak zvláštně. S tím glxgears je to jak jsem psal, ale třeba ve hře mám posuny fps podle měřáku třeba jen 10fps-20fps a v některých stavech vykreslování dokonce podle měřáků stejné jako předtím(ty náročné scény),ale to mi je fuk, protože subjektivně to jede o 100%(2x tolik) rychlejc jak předtím. No vlastně ani ne subjektivně Protože předtím v některých fázích ani nešlo řádně hrát a teď to drtím.

[Lord Diamont dogg]

Čo sa týka hier som to chcel pozrieť na NFS Shift, no to mi po štarte a úvodnom loadingu zamrzne. Neviem, či je to grafikou ale to mi prišlo ako prvý možný dôvod.

Kód: [Vybrat]

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-15-server x86_64 Ubuntu
Current Operating System: Linux laptop 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009 x86_64
Build Date: 09 April 2009  02:11:54AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@crested.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 21 08:22:43 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(**) Option "DontZap" "False"
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:5:0) ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0xc0000000/268435456, 0xd4300000/65536, 0xd4200000/1048576, I/O @ 0x00005000/256
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.65.4
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.65.4
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.65.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.65                                 
(II) ATI Proprietary Linux Driver Build Date: Aug 13 2009 21:15:59
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9612) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x2593f90
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 5 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:5:0
(--) fglrx(0): Chipset: "ATI Radeon HD 3200 Graphics " (Chipset = 0x9612)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30e4)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xd4300000
(--) fglrx(0): I/O port at 0x00005000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RS780M
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:5.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(II) fglrx(0): [pcie] 1397248 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): Interrupt handler installed at IRQ 2298.
(II) fglrx(0): IRQ 2298 Enabled.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: CMO  Model: 1554  Serial#: 0
(II) fglrx(0): Year: 2007  Week: 40
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.602 redY: 0.340   greenX: 0.306 greenY: 0.530
(II) fglrx(0): blueX: 0.151 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 69.3 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1280  h_sync: 1319  h_sync_end 1345 h_blank_end 1410 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 802  v_sync_end 806 v_blanking: 819 v_border: 0
(II) fglrx(0):  N154I3-L03
(II) fglrx(0):  CMO
(II) fglrx(0):  N154I3-L03
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff000daf541500000000
(II) fglrx(0): 28110103802115780a07f59a574e8726
(II) fglrx(0): 1e505400000001010101010101010101
(II) fglrx(0): 010101010101111b008250201330271a
(II) fglrx(0): 24004bcf10000018000000fe004e3135
(II) fglrx(0): 3449332d4c30330a2020000000fe0043
(II) fglrx(0): 4d4f0a202020202020202020000000fe
(II) fglrx(0): 004e31353449332d4c30330a20200093
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output LCD using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): EDID vendor "CMO", prod id 5460
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) fglrx(0): Output LCD connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LCD using initial mode 1280x800
(**) fglrx(0): Display dimensions: (330, 210) mm
(**) fglrx(0): DPI set to (98, 154)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:1:5:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:5:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7f5d19e91000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.65.4
(II) fglrx(0):     Date: Aug 13 2009
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.28-15-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2000
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/X11R6/lib64/modules/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 331 x 207
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "sk"
(**) AT Translated Set 2 keyboard: xkb_layout: "sk"
(**) Option "xkb_options" "grp:alts_toggle"
(**) AT Translated Set 2 keyboard: xkb_options: "grp:alts_toggle"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "sk"
(**) Video Bus: xkb_layout: "sk"
(**) Option "xkb_options" "grp:alts_toggle"
(**) Video Bus: xkb_options: "grp:alts_toggle"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) fglrx(0): EDID vendor "CMO", prod id 5460
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) fglrx(0): EDID vendor "CMO", prod id 5460
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) fglrx(0): EDID vendor "CMO", prod id 5460
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) fglrx(0): EDID vendor "CMO", prod id 5460
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) fglrx(0): EDID vendor "CMO", prod id 5460
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) fglrx(0): EDID vendor "CMO", prod id 5460
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) config/hal: Adding input device Microsoft Microsoft Notebook Receiver v2.0
(**) Microsoft Microsoft Notebook Receiver v2.0: always reports core events
(**) Microsoft Microsoft Notebook Receiver v2.0: Device: "/dev/input/event11"
(II) Microsoft Microsoft Notebook Receiver v2.0: Found 5 mouse buttons
(II) Microsoft Microsoft Notebook Receiver v2.0: Found x and y relative axes
(II) Microsoft Microsoft Notebook Receiver v2.0: Configuring as mouse
(**) Microsoft Microsoft Notebook Receiver v2.0: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Notebook Receiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Notebook Receiver v2.0" (type: MOUSE)
(**) Microsoft Microsoft Notebook Receiver v2.0: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Notebook Receiver v2.0: (accel) filter chain progression: 2.00
(**) Microsoft Microsoft Notebook Receiver v2.0: (accel) filter stage 0: 20.00 ms
(**) Microsoft Microsoft Notebook Receiver v2.0: (accel) set acceleration profile 0

[mosqa]

wine malo s nfs vzdy problemy, takze skusat nieco s najnovsou verziou ktora este ani nema zaznam v databaze wine asi nebude najlepsi napad..

[Lord Diamont dogg]

no v každom prípade známemu na rovnakom kompe ide podľa glxgears grafika o 100% lepšie tak som si povedal, že to nejak skúsim dať dokopy (závisť

[Roman Vacho]

no v každom prípade známemu na rovnakom kompe ide podľa glxgears grafika o 100% lepšie tak som si povedal, že to nejak skúsim dať dokopy (závisť

Máš poměrně novou grafickou kartu. Možná by stálo za to zkusit i novější kernel 2.6.30.5 z Ubuntu mainline(adresa se na Martenův blog nebo v Google-ubuntu kernel).
Jakou máš verzi balíku xserver-xorg-driver-radeon ?

[mosqa]

mne na tom istom igp dava glxgears cca 1000fps..ale tieto cisla pri igp dost zavisia aj od procesora samozrejme aj zakladneho taktu grafickeho jadra ktory moze byt v notebooku trosku nizsi..

ten martenuv blog: http://martenuv.blog.cz/0904/jak-na-vzdy-aktualni-jadro-a-x-server
uz davnejsie som nad tym uvzoval, idem to teda skusit, potom dam vediet ci to bude mat daky vplyv na vykon

[Roman Vacho]

mne na tom istom igp dava glxgears cca 1000fps..ale tieto cisla pri igp dost zavisia aj od procesora samozrejme aj zakladneho taktu grafickeho jadra ktory moze byt v notebooku trosku nizsi..

Kolem 1000 jsem měl v Ubuntu 8.10 a 8.04 se starší verzí Xorgu.

Lord
Tvé varování v logu jsou:

Kód: [Vybrat]

(WW) Falling back to old probe method for fglrx
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): could not detect X server version (query_status=-1)
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
Z čehož by nás mělo zajímat aiglx.

[Lord Diamont dogg]

verzia balíka xserver-xorg-video-radeon je 1:6.12.1.-0ubuntu2

môžem skúsiť dať tam novší kernel, uvidím čo to urobí...

a čo znamená ten aiglx?

[Roman Vacho]

Hlavně nezkoušejte oba to stejné. Byla by to škoda, když máte stejné grafiky.
Ozkoušet novou verzi kernelu je snadné. Ozkoušet nové drivery je horší, pokud by to člověk chtěl vracet zpět.

Ještě by mě zajímalo... oba používáté svobodné ovladače?

[Evžen Šubrt]

Pár poznámek k glxgears:

a) mnoho lidí si plete tuto utilitku s benchmarkem - počet fps v glxgears závisí na tolika detailech (velikost okna, počet zapnutých efektů v compizu, rozlišení, barevná hloubka, ...), že bych se vsadil, že ani na dvou identických kompech nedají stejné výsledky

b) hodnoty při zapnutém a vypnutém compizu či jiném kompozitním manageru mohou být (a většinou jsou) řádově rozdílné - např. 800 s compizem vs 5000 s metacity.¨

c) Mnoho lidí zaznamenalo výrazní propad fps s příchodem Ubuntu 9.04, nových ovladačů a nového xserveru. Není to však "pokles výkonu", ale korektní zobrazování 3D aplikace na 2D akcelerovaném desktopu. Vyzkoušejte sami - dříve, když člověk pohyboval oknem glxgears, tak se sice pohyboval rám, ale ozubená kola zůstávala "stát na ploše", dokud člověk nepustil myš. Nyní se již pěkně hýbou společně s oknem a dokonce se deformují podle nastavených efektů compizu.

d) Čím teda testovat výkon gr. karty? Bohatě stačí použít nějakou gamesku z repozitářů - např. oblíbený tuxracer. Dále tu je stand-alone benchmark LightsMark (stačí hledat zde na fóru) nebo komplexní Phoronix Test Suite.

[Lord Diamont dogg]

no, ja som tam inštaloval posledný ATI driver z www.ati.com

Lightsmark mi nejak nejde:

Kód: [Vybrat]

miro@laptop:~$ sudo /Lightsmark2008.2.0/bin/pc-linux64/backend
/Lightsmark2008.2.0/bin/pc-linux64/backend: error while loading shared libraries: libfreeimage.so.3: cannot open shared object file: No such file or directory
miro@laptop:~$

spúšťa sa to takto? predtým som to tuším používal....

[Roman Vacho]

no, ja som tam inštaloval posledný ATI driver z www.ati.com

Lightsmark mi nejak nejde:

Kód: [Vybrat]

miro@laptop:~$ sudo /Lightsmark2008.2.0/bin/pc-linux64/backend
/Lightsmark2008.2.0/bin/pc-linux64/backend: error while loading shared libraries: libfreeimage.so.3: cannot open shared object file: No such file or directory
miro@laptop:~$

spúšťa sa to takto? predtým som to tuším používal....

Pokud tam máš driver přímo od Ati, tak nezkoušej novou verzi X.
Ještě tu testuju ňáký volby do xorgu. Chvílu to potrvá.