LifeView FlyDVB-T Hybrid Cardbus Ubuntu 9.10

[Tomáš "Piškot" Petera]

Ahoj nedaří se mi zprovoznit tuhle kartu pod Linuxem. Postupoval jsem dle všech dostupných návodů ale bez úspěchu. Můžete mi poradit.

Kód: [Vybrat]

   11.117800] saa7130/34: v4l2 driver version 0.2.15 loaded
[   11.117861] saa7134 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.117870] saa7133[0]: found at 0000:02:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xcfdff800
[   11.117878] saa7133[0]: subsystem: 5168:3306, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected]
[   11.117894] saa7133[0]: board init: gpio is 210000
[   11.117908] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   11.137039] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.137049] nvidia 0000:01:00.0: setting latency timer to 64
[   11.137203] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
[   11.187341] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[   11.268557] saa7133[0]: i2c eeprom 00: 68 51 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   11.268578] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
[   11.268597] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 16 ff ff ff ff
[   11.268616] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268634] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
[   11.268653] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268672] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268690] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268709] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268727] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268755] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268769] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268783] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268797] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268811] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268825] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.268841] i2c-adapter i2c-0: Invalid 7-bit address 0x7a
[   11.324683] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[   11.404553] tda829x 0-004b: setting tuner address to 61
[   11.461180] kjournald starting.  Commit interval 5 seconds
[   11.471149] EXT3 FS on sdb6, internal journal
[   11.471158] EXT3-fs: mounted filesystem with writeback data mode.
[   11.476550] tda829x 0-004b: type set to tda8290+75a
[   11.927014] r8169: eth0: link up
[   11.974326] __ratelimit: 3 callbacks suppressed
[   11.974330] type=1505 audit(1258060473.568:12): operation="profile_replace" pid=956 name=/usr/share/gdm/guest-session/Xsession
[   11.976685] type=1505 audit(1258060473.572:13): operation="profile_replace" pid=957 name=/sbin/dhclient3
[   11.977604] type=1505 audit(1258060473.572:14): operation="profile_replace" pid=957 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   11.978102] type=1505 audit(1258060473.572:15): operation="profile_replace" pid=957 name=/usr/lib/connman/scripts/dhclient-script
[   11.983242] type=1505 audit(1258060473.576:16): operation="profile_replace" pid=958 name=/usr/bin/evince
[   11.998142] type=1505 audit(1258060473.592:17): operation="profile_replace" pid=958 name=/usr/bin/evince-previewer
[   12.006724] type=1505 audit(1258060473.600:18): operation="profile_replace" pid=958 name=/usr/bin/evince-thumbnailer
[   12.018657] type=1505 audit(1258060473.612:19): operation="profile_replace" pid=960 name=/usr/lib/cups/backend/cups-pdf
[   12.019725] type=1505 audit(1258060473.612:20): operation="profile_replace" pid=960 name=/usr/sbin/cupsd
[   12.023005] type=1505 audit(1258060473.616:21): operation="profile_replace" pid=961 name=/usr/sbin/tcpdump
[   12.803167] ppdev: user-space parallel port driver
[   13.448663] CPU0 attaching NULL sched-domain.
[   13.448670] CPU1 attaching NULL sched-domain.
[   13.468597] CPU0 attaching sched-domain:
[   13.468604]  domain 0: span 0-1 level MC
[   13.468609]   groups: 0 1
[   13.468616]   domain 1: span 0-1 level CPU
[   13.468620]    groups: 0-1 (__cpu_power = 2048)
[   13.468630] CPU1 attaching sched-domain:
[   13.468633]  domain 0: span 0-1 level MC
[   13.468638]   groups: 1 0
[   13.468644]   domain 1: span 0-1 level CPU
[   13.468648]    groups: 0-1 (__cpu_power = 2048)
[   15.348365] saa7133[0]: dsp access error
[   15.348370] saa7133[0]: dsp access error
[   15.348395] saa7133[0]: dsp access error
[   15.348397] saa7133[0]: dsp access error
[   15.416111] saa7133[0]: registered device video0 [v4l2]
[   15.416153] saa7133[0]: registered device vbi0
[   15.416194] saa7133[0]: registered device radio0
[   15.422265] saa7134 ALSA driver for DMA sound loaded
[   15.422282] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   15.422311] saa7133[0]/alsa: saa7133[0] at 0xcfdff800 irq 18 registered as card -2
[   15.464240] dvb_init() allocating 1 frontend
[   15.568174] DVB: registering new adapter (saa7133[0])
[   15.568181] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   15.792032] tda1004x: setting up plls for 48MHz sampling clock
[   16.020247] tda1004x: found firmware revision ea -- invalid
[   16.020251] tda1004x: trying to boot from eeprom
[   16.364966] tda1004x: found firmware revision ea -- invalid
[   16.364970] tda1004x: waiting for firmware upload...
[   16.364975] saa7134 0000:02:02.0: firmware: requesting dvb-fe-tda10046.fw
[   16.476258] tda1004x: Error during firmware upload
[   16.509931] tda1004x: found firmware revision ea -- invalid
[   16.509935] tda1004x: firmware upload failed
[   16.532372] tda827x_probe_version: could not read from tuner at addr: 0xc2
[   22.613186] CPU0 attaching NULL sched-domain.
[   22.613194] CPU1 attaching NULL sched-domain.
[   22.628107] CPU0 attaching sched-domain:
[   22.628112]  domain 0: span 0-1 level MC
[   22.628116]   groups: 0 1
[   22.628124] CPU1 attaching sched-domain:
[   22.628127]  domain 0: span 0-1 level MC
[   22.628130]   groups: 1 0
[   22.680018] eth0: no IPv6 routers present
[   29.130884] cdrom: sr0: mrw address space DMA selected
[   29.231581] cdrom: sr0: mrw address space DMA selected
[   29.388419] UDF-fs: Partition marked readonly; forcing readonly mount
[   29.411461] UDF-fs INFO UDF: Mounting volume 'Krtek a kalhotky', timestamp 2008/05/10 02:05 (103c)
[   35.076199] tda1004x: setting up plls for 48MHz sampling clock
[   35.201058] tda1004x: found firmware revision ea -- invalid
[   35.201062] tda1004x: trying to boot from eeprom
[   35.505078] tda1004x: found firmware revision ea -- invalid
[   35.505082] tda1004x: waiting for firmware upload...
[   35.505088] saa7134 0000:02:02.0: firmware: requesting dvb-fe-tda10046.fw
[   35.510977] tda1004x: Error during firmware upload
[   35.511846] tda1004x: found firmware revision ea -- invalid
[   35.511848] tda1004x: firmware upload failed
[   35.556895] tda827x_probe_version: could not read from tuner at addr: 0xc2
[   36.724373] tda827xo_set_params: could not write to tuner at addr: 0xc2

Karta je vidět v ME-TV ale to je vše. Při startu systému při nahrání šumí (s úvodním zvukem), dělala to i dříve.

Děkuji

[Roman Vacho]

Vyzkoušet 32bit systém. Co jsem četl přes Google, v 32bit by Ti měla jet.

[Tomáš "Piškot" Petera]

Jak jsi přišel na to že mám 64bit ?

Kód: [Vybrat]

Linux doma-desktop 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 i686 GNU/Linux


[Roman Vacho]

Jak jsi přišel na to že mám 64bit ?

Kód: [Vybrat]

Linux doma-desktop 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 i686 GNU/Linux


Věštill jsem podle Google a chyby.

[kem]

Mám podobný problém:

Kód: [Vybrat]

[   28.496093] tda1004x: setting up plls for 48MHz sampling clock
[   30.828038] tda1004x: timeout waiting for DSP ready
[   30.872111] tda1004x: found firmware revision 0 -- invalid
[   30.872121] tda1004x: trying to boot from eeprom
[   36.468017] tda1004x: timeout waiting for DSP ready
[   36.508013] tda1004x: found firmware revision 0 -- invalid
[   36.508018] tda1004x: waiting for firmware upload...
[   36.508031] saa7134 0000:00:0d.0: firmware: requesting dvb-fe-tda10046.fw

Vypozoroval jsem, že když odinstaluju mythtv anainstaluju ho znova, tak karta nějaký čas (pár dnů) jede. Kontaktoval jsem programátora firmware a ten mi sdělil, že

This issue is at least partly known:
The problem is that the MythTV frontend initializes the (analog) tuner in a very early state (nothing wrong with that). If the driver for the tda10046 really needs to download the firmware, this takes a number of seconds. If any software tries to program the tuner in this time, this causes a bus conflict on the card. As a result, the DSP on the 10046 crashes and will not recover. A clean solution would be to implement a locking mechanism on board layer but i never did that (not a simple task).
I guess your modification changed the timing during initialization and now the conflict doesn't occur.

Popravdě, nevím co s tím. Je to hodně nestabilní, musím to několikrát týdně reinstalovat. To se vážně nedá. Napadá mi zkusit 9.04. Ve widlích to jede dobře.