Nefunguje nova mys [vyreseno]

[LubosMM]

Ahoj vsem,
mel bych maly problem, jen doufam, ze nebude z te oblasti hloupych dotazu. Koupil jsem si novou mys - obycejna tritlacitkova mys USB a v systemu po vymene za starou nefunguje, zkusil jsem i jinou tez optickou USB co mam doma, taky bez vysledku, tak bych se chtel zeptat, kde by mohl byt zadrhel. Puvodni funguje bez problemu v jakemkoliv USB, tak jsem predpokladal, ze i s novou nebudou nejake problemy. Zkousel jsem i nejake postupy s konfiguraci xorg.conf, ale spis to byla metoda pokus omyl. Co se tyce systemu tak pouzivam Ubuntu 9.10 teda jeho mintackou odnoz. Predem diky za radu ci nejaky napad.

[ok1dtm]

nejme věštci napiš jakej máš model myši

[arrange]

Vypoj a pak znovu zapoj myš, a pak tu dej výstup z Terminálu

Kód: [Vybrat]

dmesg | tail
xinput list
grep -i mouse /var/log/Xorg.0.log
pokud možno do kódu (viz ikonka nahoře při odpovědi)

[LuciusMare]

Vypoj a pak znovu zapoj myš, a pak tu dej výstup z Terminálu

Kód: [Vybrat]

dmesg | tail
xinput list
grep -i mouse /var/log/Xorg.0.log

mousedebug?

[LubosMM]

Jasny uz to napravuju, ta nova je Icon7 D100
http://www.okcomputers.cz/icon7-d100-laser-mouse/d-81064/
Ta druha je nejaka obycejna opticka genius (usporna notasova verze s kratkym kabelem a malymi rozmery) a ta soucasna je taky genius. Funguje jen ta s kterou jsem system instaloval. Vic mysi na vyzkouseni nemam:-) System bezi na desktopu.
Tak snad vam to nejak pomuze ve vesteni.

[LubosMM]

Vypoj a pak znovu zapoj myš, a pak tu dej výstup z Terminálu

Kód: [Vybrat]

dmesg | tail
xinput list
grep -i mouse /var/log/Xorg.0.log
pokud možno do kódu (viz ikonka nahoře při odpovědi)

tak tady to je jen si nejsem jisty zda to bude OK protoze tu fcni mys mam porad zapojenou, pouze jsem vypojil a zapojil tu nefungujici btw tenhle prikaz az na dmesg jsem videl poprve:-) to jen abyste me meli kam zaradit:-)

Kód: [Vybrat]

lubos@lubos-desktop ~ $ xinput list
"Virtual core pointer" id=0 [XPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 0
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 0
"Virtual core keyboard" id=1 [XKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"NOVATEK Classic USB Keyboard" id=2 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"NOVATEK Classic USB Keyboard" id=3 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Power Button" id=4 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Power Button" id=5 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Macintosh mouse button emulation" id=6 [XExtensionPointer]
Type is MOUSE
Num_buttons is 5
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
"Genius Optical Mouse" id=7 [XExtensionPointer]
Type is MOUSE
Num_buttons is 7
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
lubos@lubos-desktop ~ $ grep -i mouse /var/log/Xorg.0.log
(==) NVIDIA(0): Silken mouse enabled
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Genius Optical Mouse
(**) Genius Optical Mouse: always reports core events
(**) Genius Optical Mouse: Device: "/dev/input/event5"
(II) Genius Optical Mouse: Found 3 mouse buttons
(II) Genius Optical Mouse: Found x and y relative axes
(II) Genius Optical Mouse: Found scroll wheel(s)
(II) Genius Optical Mouse: Configuring as mouse
(**) Genius Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE)
(**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
(**) Genius Optical Mouse: (accel) filter chain progression: 2.00
(**) Genius Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Genius Optical Mouse: (accel) set acceleration profile 0
(II) Genius Optical Mouse: initialized for relative axes.
(II) config/hal: removing device Genius Optical Mouse
(II) Genius Optical Mouse: Close
(II) config/hal: Adding input device Genius Optical Mouse
(**) Genius Optical Mouse: always reports core events
(**) Genius Optical Mouse: Device: "/dev/input/event5"
(II) Genius Optical Mouse: Found 3 mouse buttons
(II) Genius Optical Mouse: Found x and y relative axes
(II) Genius Optical Mouse: Found scroll wheel(s)
(II) Genius Optical Mouse: Configuring as mouse
(**) Genius Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE)
(**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
(**) Genius Optical Mouse: (accel) filter chain progression: 2.00
(**) Genius Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Genius Optical Mouse: (accel) set acceleration profile 0
(II) Genius Optical Mouse: initialized for relative axes.
(II) config/hal: removing device Genius Optical Mouse
(II) Genius Optical Mouse: Close
(II) config/hal: Adding input device Genius Optical Mouse
(**) Genius Optical Mouse: always reports core events
(**) Genius Optical Mouse: Device: "/dev/input/event5"
(II) Genius Optical Mouse: Found 3 mouse buttons
(II) Genius Optical Mouse: Found x and y relative axes
(II) Genius Optical Mouse: Found scroll wheel(s)
(II) Genius Optical Mouse: Configuring as mouse
(**) Genius Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE)
(**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
(**) Genius Optical Mouse: (accel) filter chain progression: 2.00
(**) Genius Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Genius Optical Mouse: (accel) set acceleration profile 0
(II) Genius Optical Mouse: initialized for relative axes.
lubos@lubos-desktop ~ $ dmesg | tail
[   99.198481] UDF-fs INFO UDF: Mounting volume 'KRYSTOF best of video', timestamp 2010/01/29 19:46 (103c)
[  268.512031] usb 7-1: new low speed USB device using uhci_hcd and address 4
[  268.676116] usb 7-1: configuration #1 chosen from 1 choice
[  268.711378] input:   as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input8
[  268.711519] generic-usb 0003:0461:4EB0.0005: input,hidraw3: USB HID v1.11 Mouse [ ] on usb-0000:00:1d.1-1/input0
[ 6743.784073] usb 7-2: USB disconnect, address 3
[ 6775.272031] usb 7-2: new low speed USB device using uhci_hcd and address 5
[ 6775.446646] usb 7-2: configuration #1 chosen from 1 choice
[ 6775.473908] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input9
[ 6775.474055] generic-usb 0003:0458:003A.0006: input,hidraw2: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-2/input0



[LubosMM]

Takze jen male shrnuti, kdyby se nasel podobny zoufalec jak ja a dostalo se mu tolik napomocnych odpovedi a presto nechtel mys ani system vyhodit:-) nakonec pomohla zmena ovladace a zapsani tech par veticek do xorg.conf dle navodu vicetlacitkova mys. Tot vse, zdar a podekovani autoru clanku.