Autor Téma: Rozliseni a frekvence monitoru po instalaci Nvidia driveru [vyřešeno] (Přečteno 3619 krát)

Gawein · « **kdy:** 08 Listopadu 2006, 18:21:09 »

Zdravim, mam takovy problem. Nainstaloval jsem na pocitac od znameho ubuntu 6.10 a mam problem se zmenou rozliseni a frekvence monitoru po instalaci Nvidia driveru. Pokud necham driver "nv" mam vse spravne nastveno 1600x1200 75hz apod. ale kdyz nainstaluju jakekoliv nvidia drivery viz http://easylinux.info/wiki/Ubuntu:Edgy#How_to_install_Graphics_Driver_.28NVIDIA.29 mam rozliseni jen 800x600 a 60Hz a zadna jina moznost tam neni

(3D akcelerace se zapne). Zkousel jsem jak stable tak beta ovladace, oboji se stejnym vysledkem. Prosel jsem hodne for kde se tohle resilo, ale ani jeden postup mi nepomohl.

Konfigurace pc: G4 Ti 4200 64mb, Monitor-Jean JD199, 2800+ sempron, NF3

Xorg.conf

Kód: [Vybrat]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"cz"
	Option		"XkbVariant"	"cz"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"NVIDIA GeForce 4200"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
#     Option		"UseFBDev"		"false"
EndSection

Section "Monitor"
	Identifier	"Jean JD199"
	Option		"DPMS"
	HorizSync	30-96
	VertRefresh	50-150
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA GeForce 4200"
	Monitor		"Jean JD199"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1600x1200" "1280x1024" "1280x960" "1152x768" "1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4

TIBOR · « **Odpověď #1 kdy:** 08 Listopadu 2006, 19:06:40 »

Ak mas 3d akceleraciu mas mat v sekcii module zakazane(#) Load "dri". Nemas to zobrazene do konca tak sa opytam pri depth 24 to mas tiez takto nastavene?

Gawein · « **Odpověď #2 kdy:** 08 Listopadu 2006, 19:42:59 »

Kód: [Vybrat]

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA GeForce 4200"
	Monitor		"Jean JD199"
	DefaultDepth	16
	SubSection "Display"
		Depth		1
		Modes		"1600x1200" "1280x1024" "1280x960" "1152x768" "1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1600x1200" "1280x1024" "1280x960" "1152x768" "1024x768"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1600x1200" "1280x1024" "1280x960" "1152x768" "1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1600x1200" "1280x1024" "1280x960" "1152x768" "1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1600x1200" "1280x1024" "1280x960" "1152x768" "1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1600x1200" "1280x1024" "1280x960" "1152x768" "1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Gawein · « **Odpověď #3 kdy:** 08 Listopadu 2006, 21:07:06 »

dri jsem tedy zakazal a porad to stejne 800x600 60Hz

Vojtin · « **Odpověď #4 kdy:** 08 Listopadu 2006, 21:23:15 »

nepomůže ani? sudo dpkg-reconfigure xserver-xorg

scippio · « **Odpověď #5 kdy:** 08 Listopadu 2006, 21:37:39 »

A co takhle pouzit gtf?

Gawein · « **Odpověď #6 kdy:** 08 Listopadu 2006, 22:28:09 »

Citace: Vojtin

nepomůže ani? sudo dpkg-reconfigure xserver-xorg

Zkousel jsem to nekolikrat, nikdy to nepomohlo, vzdy zustanu viset na 800x600 60Hz

Gawein · « **Odpověď #7 kdy:** 08 Listopadu 2006, 22:28:50 »

Citace: scippio

A co takhle pouzit gtf?

Taky jsem zkousel, dokonce pro vice parametru 1600 1200 75 nebo 1024 768 85 a nic

uz fakt nevim

Gawein · « **Odpověď #8 kdy:** 08 Listopadu 2006, 22:34:12 »

Znovu muj xorg.conf po par operacich:

Kód: [Vybrat]

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "Device"
	Identifier	"NVIDIA GeForce 4200"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Jean JD199"
	Option		"DPMS"
	HorizSync	30-96
	VertRefresh	50-150
	 Modeline "1024x768_85.00"  94.39  1024 1088 1200 1376  768 769 772 807  -HSync +Vsync


EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA GeForce 4200"
	Monitor		"Jean JD199"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
.
.
.
      SubSection "Display"
		Depth		24
		Modes		"1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection

scippio · « **Odpověď #9 kdy:** 08 Listopadu 2006, 23:22:06 »

a xrandr ukazuje take jen to jedno rozliseni ?

Gawein · « **Odpověď #10 kdy:** 09 Listopadu 2006, 07:47:07 »

Citace: scippio

a xrandr ukazuje take jen to jedno rozliseni ?

Takze bez "nvidia"driveru ukaze vsechny rozliseni.
S "nvidia" driverama ukaze
SZ: Pixels Physical Refresh
*0 800 x 600 ( 270mm x 203mm ) *50

Gawein · « **Odpověď #11 kdy:** 09 Listopadu 2006, 08:20:37 »

Tak KONECNE VYRESENO, vsem dekuji za pomoc. Napsal bych tu presne postup, ale zadny takovy nemam, zkousel jsem co se dalo, nakonec pomohli org. ovladace s nvidia stranek. Jeste jednou dekuji.