Zdravim, potrebuju rozjet regulaci otacek na procesoru. Ve win jsem pouzival Speed fan a nebyl problem. Desku mam Dfi LanParty Ultra-D NF3. Postupoval jsem podle tohoto navodu
http://easylinux.info/wiki/Ubuntu:Edgy#How_to_control_fan_speed_.28lm-sensors.29 ale skocnil jsem s hlaskou
$ pwmconfig
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.
We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.
/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
sensors
it8712-isa-0290
Adapter: ISA adapter
VCore 1: +1.46 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +1.62 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +3.18 V (min = +3.14 V, max = +3.47 V) ALARM
+5V: +4.97 V (min = +4.76 V, max = +5.24 V)
+12V: +11.71 V (min = +11.39 V, max = +12.61 V)
-12V: -16.07 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -2.35 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +4.84 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +2.98 V
fan1: 2311 RPM (min = 998 RPM, div =
fan2: 1110 RPM (min = 1394 RPM, div =
ALARM
fan3: 1016 RPM (min = 799 RPM, div =
ALARM
M/B Temp: +34°C (low = +15°C, high = +40°C) sensor = diode ALARM
CPU Temp: +41°C (low = +30°C, high = +48°C) sensor = thermistor
Temp3: +40°C (low = +15°C, high = +45°C) sensor = thermistor
Nasel jsem i nejake forum kde psali ze je to bug ve Fedore ale to co tam psali tak nepomohlo. Nebyla by nejaka mala rada nebo nakopnuti co s tim dale. Diky
Téma: Regulace otacek (Přečteno 2477 krát)
