card reader MSI Wind U135 netbook

[hopic]

Po instalaci 9.10 přestala fungovat čtečka karet na netbooku MSI Wind U135. Po reinstallu na 10.04 problém přetrvává (ve Win7 běžela ok)

Pravděpodobně jde o to, že čtečka není vidět mezi USB řadiči (ve Windows) ale jako nějaký jiný řadič. Proto nejde ani bootovat z flashky a v biosu čtečka také není vidět.

Tuší někdo co s tím?

[hopic]

Problém stále přetrvává, nenajde se někdo se stejným??

[karlitos]

Zajimavejsi by bylo zjistit jestli neco vidi ubuntu. Dej sem vypisy lsusb , lspci a kdyztak jeste vypis dmesg po startu. Na ty vypisy tady pouzij tag CODE - nahore ten dvojkrizek. [ code] [ /code]

[hopic]

dmesg:

Kód: [Vybrat]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=d356b49c-0a04-4640-9725-54ba0b98d7e8 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f3f8000 (usable)
[    0.000000]  BIOS-e820: 000000003f3f8000 - 000000003f43e000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f43e000 - 000000003f445000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f445000 - 000000003f448000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f448000 - 000000003f46c000 (reserved)
[    0.000000]  BIOS-e820: 000000003f46c000 - 000000003f46d000 (usable)
[    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f477000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f477000 - 000000003f498000 (reserved)
[    0.000000]  BIOS-e820: 000000003f498000 - 000000003f49f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f49f000 - 000000003f600000 (usable)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.6 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x3f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F600000 mask 0FFF00000 write-through
[    0.000000]   2 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   3 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009d800 (usable)
[    0.000000]  modified: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003f3f8000 (usable)
[    0.000000]  modified: 000000003f3f8000 - 000000003f43e000 (ACPI NVS)
[    0.000000]  modified: 000000003f43e000 - 000000003f445000 (ACPI data)
[    0.000000]  modified: 000000003f445000 - 000000003f448000 (ACPI NVS)
[    0.000000]  modified: 000000003f448000 - 000000003f46c000 (reserved)
[    0.000000]  modified: 000000003f46c000 - 000000003f46d000 (usable)
[    0.000000]  modified: 000000003f46d000 - 000000003f477000 (ACPI NVS)
[    0.000000]  modified: 000000003f477000 - 000000003f498000 (reserved)
[    0.000000]  modified: 000000003f498000 - 000000003f49f000 (ACPI NVS)
[    0.000000]  modified: 000000003f49f000 - 000000003f600000 (usable)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-000000003f600000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 003f600000 page 2M
[    0.000000] kernel direct mapping tables up to 3f600000 @ 10000-12000
[    0.000000] RAMDISK: 2eee9000 - 2f7393ad
[    0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 MSI_NB)
[    0.000000] ACPI: XSDT 000000003f43e080 0004C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 000000003f444ad0 000F4 (v04 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 3F473F40/000000003F473F80, using 32 (20090903/tbfadt-486)
[    0.000000] ACPI: DSDT 000000003f43e158 06975 (v02 MSI_NB MEGABOOK 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 000000003f473f40 00040
[    0.000000] ACPI: APIC 000000003f444bc8 00062 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 000000003f444c30 0003C (v01 A M I  ITL 945. 01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 000000003f444c70 00176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: HPET 000000003f444de8 00038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000003)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003f600000
[    0.000000] Bootmem setup node 0 0000000000000000-000000003f600000
[    0.000000]   NODE_DATA [0000000000010000 - 0000000000014fff]
[    0.000000]   bootmap [0000000000015000 -  000000000001cebf] pages 8
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 003f600000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 0001a29e64]    TEXT DATA BSS ==> [0001000000 - 0001a29e64]
[    0.000000]   #3 [002eee9000 - 002f7393ad]          RAMDISK ==> [002eee9000 - 002f7393ad]
[    0.000000]   #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
[    0.000000]   #5 [0001a2a000 - 0001a2a24e]              BRK ==> [0001a2a000 - 0001a2a24e]
[    0.000000] found SMP MP-table at [ffff8800000fcac0] fcac0
[    0.000000] Reserving 64MB of memory at 32MB for crashkernel (System RAM: 1014MB)
[    0.000000]  [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880006000000-ffff880006dfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0003f3f8
[    0.000000]     0: 0x0003f46c -> 0x0003f46d
[    0.000000]     0: 0x0003f49f -> 0x0003f600
[    0.000000] On node 0 totalpages: 259303
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 101 pages reserved
[    0.000000]   DMA zone: 3824 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3493 pages used for memmap
[    0.000000]   DMA32 zone: 251829 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24


[hopic]

Pokračování:

Kód: [Vybrat]

[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000003f3f8000 - 000000003f43e000
[    0.000000] PM: Registered nosave memory: 000000003f43e000 - 000000003f445000
[    0.000000] PM: Registered nosave memory: 000000003f445000 - 000000003f448000
[    0.000000] PM: Registered nosave memory: 000000003f448000 - 000000003f46c000
[    0.000000] PM: Registered nosave memory: 000000003f46d000 - 000000003f477000
[    0.000000] PM: Registered nosave memory: 000000003f477000 - 000000003f498000
[    0.000000] PM: Registered nosave memory: 000000003f498000 - 000000003f49f000
[    0.000000] Allocating PCI resources starting at 3f600000 (gap: 3f600000:bf600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576
[    0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 255653
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=d356b49c-0a04-4640-9725-54ba0b98d7e8 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 938036k/1038336k available (5409k kernel code, 1124k absent, 99176k reserved, 2976k data, 876k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 10485760 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1662.713 MHz processor.
[    0.010012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.42 BogoMIPS (lpj=16627130)
[    0.010081] Security Framework initialized
[    0.010124] AppArmor: AppArmor initialized
[    0.010421] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.011395] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.011834] Mount-cache hash table entries: 256
[    0.012156] Initializing cgroup subsys ns
[    0.012168] Initializing cgroup subsys cpuacct
[    0.012178] Initializing cgroup subsys memory
[    0.012196] Initializing cgroup subsys devices
[    0.012203] Initializing cgroup subsys freezer
[    0.012208] Initializing cgroup subsys net_cls
[    0.012255] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.012262] CPU: L2 cache: 512K
[    0.012271] CPU 0/0x0 -> Node 0
[    0.012276] CPU: Physical Processor ID: 0
[    0.012281] CPU: Processor Core ID: 0
[    0.012288] mce: CPU supports 5 MCE banks
[    0.012302] CPU0: Thermal monitoring enabled (TM2)
[    0.012311] using mwait in idle threads.
[    0.012316] Performance Events: Atom events, Intel PMU driver.
[    0.012330] ... version:                3
[    0.012334] ... bit width:              40
[    0.012339] ... generic registers:      2
[    0.012344] ... value mask:             000000ffffffffff
[    0.012349] ... max period:             000000007fffffff
[    0.012354] ... fixed-purpose events:   3
[    0.012359] ... event mask:             0000000700000003
[    0.021176] ACPI: Core revision 20090903
[    0.038027] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.038038] ftrace: allocating 22518 entries in 89 pages
[    0.040125] Setting APIC routing to flat
[    0.040453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.147298] CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz stepping 0a
[    0.150000] Booting processor 1 APIC 0x1 ip 0x6000
[    0.020000] Initializing CPU#1
[    0.020000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.020000] CPU: L2 cache: 512K
[    0.020000] CPU 1/0x1 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 0
[    0.020000] CPU1: Thermal monitoring enabled (TM2)
[    0.300156] CPU1: Intel(R) Atom(TM) CPU N450   @ 1.66GHz stepping 0a
[    0.300172] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.310036] Brought up 2 CPUs
[    0.310045] Total of 2 processors activated (6650.43 BogoMIPS).
[    0.310292] CPU0 attaching sched-domain:
[    0.310301]  domain 0: span 0-1 level SIBLING
[    0.310307]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.310320]   domain 1: span 0-1 level MC
[    0.310326]    groups: 0-1 (cpu_power = 1178)
[    0.310339] CPU1 attaching sched-domain:
[    0.310344]  domain 0: span 0-1 level SIBLING
[    0.310350]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.310362]   domain 1: span 0-1 level MC
[    0.310367]    groups: 0-1 (cpu_power = 1178)
[    0.310593] devtmpfs: initialized
[    0.310593] regulator: core version 0.5
[    0.310593] Time:  9:19:10  Date: 05/15/10
[    0.310593] NET: Registered protocol family 16
[    0.310593] Trying to unpack rootfs image as initramfs...
[    0.310667] ACPI: bus type pci registered
[    0.310861] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.310870] PCI: Not using MMCONFIG.
[    0.310876] PCI: Using configuration type 1 for base access
[    0.313948] bio: create slab <bio-0> at 0
[    0.316874] ACPI: EC: Look up EC in DSDT
[    0.321386] ACPI: BIOS _OSI(Linux) query ignored
[    0.322015] ACPI: BIOS _OSI(Linux) query ignored
[    0.322658] ACPI: BIOS _OSI(Linux) query ignored
[    0.323283] ACPI Error: No handler for Region [EC__] (ffff88003eda8000) [EmbeddedControl] (20090903/evregion-319)
[    0.323304] ACPI Error: Region EmbeddedControl(3) has no handler (20090903/exfldio-295)
[    0.323324] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node ffff88003eda7c00), AE_NOT_EXIST
[    0.324731] ACPI: Executed 1 blocks of module-level executable AML code
[    0.332539] ACPI: BIOS _OSI(Linux) query ignored
[    0.335348] ACPI: BIOS _OSI(Linux) query ignored
[    0.335991] ACPI: BIOS _OSI(Linux) query ignored
[    0.336636] ACPI: BIOS _OSI(Linux) query ignored
[    0.337257] ACPI: Interpreter enabled
[    0.337257] ACPI: (supports S0 S1 S3 S4 S5)
[    0.337257] ACPI: Using IOAPIC for interrupt routing
[    0.337257] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.354275] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
[    0.354275] PCI: Not using MMCONFIG.
[    0.375553] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.376242] ACPI: No dock devices found.
[    0.377159] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.377384] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
[    0.377397] pci 0000:00:02.0: reg 14 io port: [0xf100-0xf107]
[    0.377409] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.377421] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe700000-0xfe7fffff]
[    0.377494] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea00000-0xfea7ffff]
[    0.377668] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeb00000-0xfeb03fff]
[    0.377757] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.377768] pci 0000:00:1b.0: PME# disabled
[    0.377904] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.377917] pci 0000:00:1c.0: PME# disabled
[    0.378058] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.378070] pci 0000:00:1c.3: PME# disabled
[    0.378167] pci 0000:00:1d.0: reg 20 io port: [0xf0a0-0xf0bf]
[    0.378267] pci 0000:00:1d.1: reg 20 io port: [0xf080-0xf09f]
[    0.378366] pci 0000:00:1d.2: reg 20 io port: [0xf060-0xf07f]
[    0.378465] pci 0000:00:1d.3: reg 20 io port: [0xf040-0xf05f]
[    0.378591] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb05000-0xfeb053ff]
[    0.378685] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.378697] pci 0000:00:1d.7: PME# disabled
[    0.379016] pci 0000:00:1f.2: reg 10 io port: [0xf0f0-0xf0f7]
[    0.379032] pci 0000:00:1f.2: reg 14 io port: [0xf0e0-0xf0e3]
[    0.379047] pci 0000:00:1f.2: reg 18 io port: [0xf0d0-0xf0d7]
[    0.379063] pci 0000:00:1f.2: reg 1c io port: [0xf0c0-0xf0c3]
[    0.379078] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
[    0.379094] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeb04000-0xfeb043ff]
[    0.379162] pci 0000:00:1f.2: PME# supported from D3hot
[    0.379175] pci 0000:00:1f.2: PME# disabled
[    0.379267] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[    0.379408] pci 0000:01:00.0: reg 10 32bit mmio: [0xfe900000-0xfe90ffff]
[    0.379608] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    0.379704] pci 0000:02:00.0: reg 10 io port: [0xe000-0xe0ff]
[    0.379742] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xe0010000-0xe0010fff]
[    0.379769] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xe0000000-0xe000ffff]
[    0.379788] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe800000-0xfe81ffff]
[    0.379858] pci 0000:02:00.0: supports D1 D2
[    0.379865] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.379877] pci 0000:02:00.0: PME# disabled
[    0.380050] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff]
[    0.380063] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.380079] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe00fffff]
[    0.380179] pci 0000:00:1e.0: transparent bridge
[    0.380245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.380568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.380745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.380967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.414711] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.415114] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.415495] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.415838] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.416194] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.416555] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.416899] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.417274] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.417633] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.417669] vgaarb: loaded
[    0.418044] SCSI subsystem initialized
[    0.418294] libata version 3.00 loaded.
[    0.418563] usbcore: registered new interface driver usbfs
[    0.418606] usbcore: registered new interface driver hub
[    0.418704] usbcore: registered new device driver usb
[    0.419467] ACPI: WMI: Mapper loaded
[    0.419475] PCI: Using ACPI for IRQ routing
[    0.419913] NetLabel: Initializing
[    0.419921] NetLabel:  domain hash size = 128
[    0.419927] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.419965] NetLabel:  unlabeled traffic allowed by default
[    0.420143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.420160] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.430165] Switching to clocksource tsc
[    0.435788] AppArmor: AppArmor Filesystem Enabled
[    0.435836] pnp: PnP ACPI init
[    0.435885] ACPI: bus type pnp registered
[    0.441716] pnp: PnP ACPI: found 12 devices
[    0.441725] ACPI: ACPI bus type pnp unregistered
[    0.441767] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.441791] system 00:03: ioport range 0x800-0x87f has been reserved
[    0.441801] system 00:03: ioport range 0x480-0x4bf has been reserved
[    0.441812] system 00:03: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.441823] system 00:03: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.441833] system 00:03: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.441843] system 00:03: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.441853] system 00:03: iomem range 0xfff00000-0xffffffff has been reserved
[    0.441879] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.447153] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.447168] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    0.447181] pci 0000:00:1c.0:   MEM window: 0xfe900000-0xfe9fffff
[    0.447193] pci 0000:00:1c.0:   PREFETCH window: 0x00000040000000-0x000000401fffff
[    0.447210] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02
[    0.447219] pci 0000:00:1c.3:   IO window: 0xe000-0xefff
[    0.447232] pci 0000:00:1c.3:   MEM window: 0xfe800000-0xfe8fffff
[    0.447244] pci 0000:00:1c.3:   PREFETCH window: 0x000000e0000000-0x000000e00fffff
[    0.447260] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.447267] pci 0000:00:1e.0:   IO window: disabled
[    0.447278] pci 0000:00:1e.0:   MEM window: disabled
[    0.447288] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.447327]   alloc irq_desc for 16 on node -1
[    0.447334]   alloc kstat_irqs on node -1
[    0.447352] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.447365] pci 0000:00:1c.0: setting latency timer to 64
[    0.447387]   alloc irq_desc for 19 on node -1
[    0.447393]   alloc kstat_irqs on node -1
[    0.447405] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.447417] pci 0000:00:1c.3: setting latency timer to 64
[    0.447434] pci 0000:00:1e.0: setting latency timer to 64
[    0.447448] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.447456] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.447465] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
[    0.447473] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.447482] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x401fffff]
[    0.447491] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.447499] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.447507] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xe00fffff]
[    0.447517] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.447525] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.447626] NET: Registered protocol family 2
[    0.447999] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.449951] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.451972] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.452861] TCP: Hash tables configured (established 131072 bind 65536)
[    0.452876] TCP reno registered
[    0.453174] NET: Registered protocol family 1
[    0.453228] pci 0000:00:02.0: Boot video device
[    0.479928] Scanning for low memory corruption every 60 seconds
[    0.480327] audit: initializing netlink socket (disabled)
[    0.480361] type=2000 audit(1273915149.479:1): initialized
[    0.500458] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.505690] VFS: Disk quotas dquot_6.5.2
[    0.505914] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.508257] fuse init (API version 7.13)
[    0.508608] msgmni has been set to 1832
[    0.509437] alg: No test for stdrng (krng)
[    0.509667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.509677] io scheduler noop registered
[    0.509684] io scheduler anticipatory registered
[    0.509690] io scheduler deadline registered
[    0.509818] io scheduler cfq registered (default)
[    0.510196]   alloc irq_desc for 24 on node -1
[    0.510205]   alloc kstat_irqs on node -1
[    0.510230] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.510251] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.510522]   alloc irq_desc for 25 on node -1
[    0.510529]   alloc kstat_irqs on node -1
[    0.510548] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X
[    0.510567] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.510801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.510842] Firmware did not grant requested _OSC control
[    0.510890] Firmware did not grant requested _OSC control
[    0.510981] Firmware did not grant requested _OSC control
[    0.511022] Firmware did not grant requested _OSC control
[    0.511067] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.511682] ACPI: AC Adapter [ADP1] (off-line)
[    0.511928] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0
[    0.512398] ACPI: Lid Switch [LID0]
[    0.512592] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.512602] ACPI: Power Button [PWRB]
[    0.512751] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.512760] ACPI: Power Button [PWRF]
[    0.514449] ACPI: SSDT 000000003f46e918 00444 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.516428] Monitor-Mwait will be used to enter C-1 state
[    0.516526] Monitor-Mwait will be used to enter C-2 state
[    0.516615] Monitor-Mwait will be used to enter C-3 state
[    0.516638] Marking TSC unstable due to TSC halts in idle
[    0.516828] processor LNXCPU:00: registered as cooling_device0
[    0.518143] Switching to clocksource hpet
[    0.519686] processor LNXCPU:01: registered as cooling_device1
[    0.528628] thermal LNXTHERM:01: registered as thermal_zone0
[    0.528656] ACPI: Thermal Zone [THRM] (31 C)
[    0.534368] Linux agpgart interface v0.103
[    0.534473] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.538857] brd: module loaded
[    0.540663] loop: module loaded
[    0.540974] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.542445] Fixed MDIO Bus: probed
[    0.542796] PPP generic driver version 2.4.2
[    0.543359] tun: Universal TUN/TAP device driver, 1.6
[    0.543366] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.544313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.544411]   alloc irq_desc for 23 on node -1
[    0.544419]   alloc kstat_irqs on node -1
[    0.544461] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.544769] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.544780] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.545112] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.545162] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.545187] ehci_hcd 0000:00:1d.7: debug port 1
[    0.549083] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.550223] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb05000
[    0.572588] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.572940] usb usb1: configuration #1 chosen from 1 choice
[    0.573042] hub 1-0:1.0: USB hub found
[    0.573068] hub 1-0:1.0: 8 ports detected
[    0.573274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.573330] uhci_hcd: USB Universal Host Controller Interface driver
[    0.573437] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.573458] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.573468] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.573613] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.573666] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f0a0
[    0.573973] usb usb2: configuration #1 chosen from 1 choice
[    0.574080] hub 2-0:1.0: USB hub found
[    0.574107] hub 2-0:1.0: 2 ports detected
[    0.574272] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.574291] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.574301] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.574434] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.574514] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f080
[    0.574852] usb usb3: configuration #1 chosen from 1 choice
[    0.574957] hub 3-0:1.0: USB hub found
[    0.575001] hub 3-0:1.0: 2 ports detected
[    0.575155]   alloc irq_desc for 18 on node -1
[    0.575162]   alloc kstat_irqs on node -1
[    0.575180] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.575199] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.575210] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.575369] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.575455] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f060
[    0.575768] usb usb4: configuration #1 chosen from 1 choice
[    0.575863] hub 4-0:1.0: USB hub found
[    0.575889] hub 4-0:1.0: 2 ports detected
[    0.576067] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.576088] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.576099] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.576252] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.576324] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f040
[    0.576639] usb usb5: configuration #1 chosen from 1 choice
[    0.576751] hub 5-0:1.0: USB hub found
[    0.576776] hub 5-0:1.0: 2 ports detected
[    0.577074] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.598146] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.598186] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.598545] mice: PS/2 mouse device common for all mice
[    0.598953] rtc_cmos 00:05: RTC can wake from S4
[    0.599104] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.599155] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.599570] device-mapper: uevent: version 1.0.3
[    0.599923] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.600196] device-mapper: multipath: version 1.1.0 loaded
[    0.600206] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.601030] cpuidle: using governor ladder
[    0.601388] cpuidle: using governor menu
[    0.602629] TCP cubic registered
[    0.603144] NET: Registered protocol family 10
[    0.604678] lo: Disabled Privacy Extensions
[    0.605631] NET: Registered protocol family 17
[    0.607210] PM: Resume from disk failed.
[    0.607244] registered taskstats version 1
[    0.607932]   Magic number: 10:344:323
[    0.607984] tty tty48: hash matches
[    0.608109] rtc_cmos 00:05: setting system clock to 2010-05-15 09:19:10 UTC (1273915150)
[    0.608120] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.608125] EDD information not available.
[    0.620442] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.652806] ACPI: Battery Slot [BAT1] (battery present)
[    0.786871] Freeing initrd memory: 8512k freed
[    0.793836] Freeing unused kernel memory: 876k freed
[    0.794476] Write protecting the kernel read-only data: 7680k
[    0.836000] udev: starting version 151
[    1.131164] ahci 0000:00:1f.2: version 3.0
[    1.131204] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.131293]   alloc irq_desc for 26 on node -1
[    1.131301]   alloc kstat_irqs on node -1
[    1.131325] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[    1.131469] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.131483] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    1.131496] ahci 0000:00:1f.2: setting latency timer to 64
[    1.155947] scsi0 : ahci
[    1.156359] scsi1 : ahci
[    1.157115] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.157158] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.157239] r8169 0000:02:00.0: setting latency timer to 64
[    1.157320]   alloc irq_desc for 27 on node -1
[    1.157327]   alloc kstat_irqs on node -1
[    1.157357] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[    1.159148] eth0: RTL8102e at 0xffffc90000530000, 40:61:86:1b:66:7d, XID 04c00000 IRQ 27
[    1.161789] scsi2 : ahci
[    1.162094] scsi3 : ahci
[    1.162600] ata1: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04100 irq 26
[    1.162613] ata2: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04180 irq 26
[    1.162624] ata3: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04200 irq 26
[    1.162635] ata4: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04280 irq 26
[    1.510154] ata3: SATA link down (SStatus 0 SControl 300)
[    1.510203] ata2: SATA link down (SStatus 0 SControl 300)
[    1.510237] ata4: SATA link down (SStatus 0 SControl 300)
[    1.510273] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.511728] ata1.00: ATA-8: FUJITSU MJA2250BH G2, 00000018, max UDMA/100
[    1.511741] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.513420] ata1.00: configured for UDMA/100
[    1.530398] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MJA2250B 0000 PQ: 0 ANSI: 5
[    1.530853] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.531195] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.531358] sd 0:0:0:0: [sda] Write Protect is off
[    1.531366] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.531446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.531884]  sda: sda1 sda2 < sda5 >
[    1.586987] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.059827] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   16.795689] Adding 2971984k swap on /dev/sda5.  Priority:-1 extents:1 across:2971984k
[   17.143427] udev: starting version 151
[   17.457839] lp: driver loaded but no devices found
[   17.870321] rt3090sta: module is from the staging directory, the quality is unknown, you have been warned.
[   17.948305] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[   17.948627] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[   17.969311] rt3090 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.969369] rt3090 0000:01:00.0: setting latency timer to 64
[   17.969784]
[   17.969787]
[   17.969789] === pAd = ffffc90000902000, size = 526344 ===
[   17.969793]
[   17.969800] <-- RTMPAllocAdapterBlock, Status=0
[   17.969807] pAd->CSRBaseAddress =0xffffc900006c0000, csr_addr=0xffffc900006c0000!
[   18.013042] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   18.324104] type=1505 audit(1273907968.211:2):  operation="profile_load" pid=547 name="/sbin/dhclient3"
[   18.324865] type=1505 audit(1273907968.211:3):  operation="profile_load" pid=547 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.325300] type=1505 audit(1273907968.211:4):  operation="profile_load" pid=547 name="/usr/lib/connman/scripts/dhclient-script"
[   18.365674] [drm] Initialized drm 1.1.0 20060810
[   18.611672] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 2
[   18.718538] type=1505 audit(1273907968.601:5):  operation="profile_load" pid=676 name="/usr/share/gdm/guest-session/Xsession"
[   18.729449] type=1505 audit(1273907968.611:6):  operation="profile_replace" pid=677 name="/sbin/dhclient3"
[   18.730724] type=1505 audit(1273907968.621:7):  operation="profile_replace" pid=677 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.731186] type=1505 audit(1273907968.621:8):  operation="profile_replace" pid=677 name="/usr/lib/connman/scripts/dhclient-script"
[   18.736643] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.736658] i915 0000:00:02.0: setting latency timer to 64
[   18.774400]   alloc irq_desc for 28 on node -1
[   18.774411]   alloc kstat_irqs on node -1
[   18.774483] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[   18.774771] [drm] set up 7M of stolen space
[   18.787629] type=1505 audit(1273907968.671:9):  operation="profile_load" pid=681 name="/usr/bin/evince"
[   18.828357] type=1505 audit(1273907968.711:10):  operation="profile_load" pid=681 name="/usr/bin/evince-previewer"
[   18.847220] type=1505 audit(1273907968.731:11):  operation="profile_load" pid=681 name="/usr/bin/evince-thumbnailer"
[   18.883126] [drm] initialized overlay support
[   19.330187] fb0: inteldrmfb frame buffer device
[   19.330195] registered panic notifier
[   19.337507] acpi device:1f: registered as cooling_device2
[   19.342711] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   19.342930] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.343069] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.411863] vga16fb: initializing
[   19.411873] vga16fb: mapped to 0xffff8800000a0000
[   19.411884] vga16fb: not registering due to another framebuffer present
[   19.434748] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input6
[   19.546645] RX DESC ffff88002f1fb000  size = 2048
[   19.547043] <-- RTMPAllocTxRxRingMemory, Status=0
[   19.575269] Key1Str is Invalid key length(0) or Type(0)
[   19.575338] Key2Str is Invalid key length(0) or Type(0)
[   19.575407] Key3Str is Invalid key length(0) or Type(0)
[   19.575475] Key4Str is Invalid key length(0) or Type(0)
[   19.576539] 1. Phy Mode = 9
[   19.576543] 2. Phy Mode = 9
[   19.576548] NVM is Efuse and its size =2d[2d0-2fc]
[   19.577952] 3. Phy Mode = 9
[   19.601055] RTMPSetPhyMode: channel is out of range, use first channel=1
[   19.601119] MCS Set = ff 00 00 00 01
[   19.814447] RTMPFilterCalibration - can't find a valid value, loopcnt=102 stop calibrating<==== rt28xx_init, Status=0
[   19.815933] 0x1300 = 00064300
[   19.815956]  AUX_CTRL = 0x                             c02
[   19.815963]  Read AUX_CTRL = 0xc02
[   19.815969]  Write AUX_CTRL = 0x1c02
[   19.815974]  OSC_CTRL = 0x3ff11
[   19.816249] ====> rt30xx Read PowerLevelMode =  0x3.
[   19.816254] ====> rt30xx F Write 0x83 Command = 0x3.
[   19.823157] r8169: eth0: link down
[   19.823520] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.298689] [drm] Big FIFO is enabled
[   20.329575] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.329643] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   20.383941] [drm] Big FIFO is enabled
[   20.383965] [drm] Big FIFO is enabled
[   20.384105] [drm] Big FIFO is enabled
[   20.420597] Console: switching to colour frame buffer device 128x37
[   20.510023] hda_codec: ALC662 rev1: BIOS auto-probing.
[   20.511788] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   20.953941] [drm] Big FIFO is enabled
[   20.992828] [drm] Big FIFO is enabled
[   21.482894] ppdev: user-space parallel port driver
[   21.918981] [drm] Big FIFO is enabled
[   22.340767] [drm] Big FIFO is enabled
[   22.363672] CPU0 attaching NULL sched-domain.
[   22.363685] CPU1 attaching NULL sched-domain.
[   22.513079] CPU0 attaching sched-domain:
[   22.513088]  domain 0: span 0-1 level SIBLING
[   22.513094]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   22.513107]   domain 1: span 0-1 level MC
[   22.513112]    groups: 0-1 (cpu_power = 1178)
[   22.513125] CPU1 attaching sched-domain:
[   22.513130]  domain 0: span 0-1 level SIBLING
[   22.513135]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   22.513147]   domain 1: span 0-1 level MC
[   22.513152]    groups: 0-1 (cpu_power = 1178)
[   25.112667] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
[   27.915991] CPU0 attaching NULL sched-domain.
[   27.916006] CPU1 attaching NULL sched-domain.
[   27.970185] CPU0 attaching sched-domain:
[   27.970195]  domain 0: span 0-1 level SIBLING
[   27.970203]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   27.970221]   domain 1: span 0-1 level MC
[   27.970228]    groups: 0-1 (cpu_power = 1178)
[   27.970243] CPU1 attaching sched-domain:
[   27.970250]  domain 0: span 0-1 level SIBLING
[   27.970257]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   27.970273]   domain 1: span 0-1 level MC
[   27.970280]    groups: 0-1 (cpu_power = 1178)
[   30.512547] wlan0: no IPv6 routers present
[   40.660122] ERROR!!!  , brt30xxBanMcuCmd = 1, Read BBP 3
[   40.660133] ERROR!!!   brt30xxBanMcuCmd = 1. Write BBP 3
[   41.150147] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 288
[   41.150677] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[   75.123033] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
[  115.128034] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
[  161.480110] usb 2-1: new low speed USB device using uhci_hcd and address 2
[  161.670325] usb 2-1: configuration #1 chosen from 1 choice
[  161.798317] usbcore: registered new interface driver hiddev
[  161.812885] input: Genius       Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input8
[  161.813730] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius       Optical Mouse] on usb-0000:00:1d.0-1/input0
[  161.813879] usbcore: registered new interface driver usbhid
[  161.814859] usbhid: v2.6:USB HID core driver
[  175.128080] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140

lspci

Kód: [Vybrat]

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

lsusb

Kód: [Vybrat]

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0458:003a KYE Systems Corp. (Mouse Systems)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


[karlitos]

Bohuzel jsem zaitm nic neobjevil. Kdyz se do ctecky strci karta - treba SD mebo MMC s jinymi byvaji problemy - vypise se jeste neco dalsiho v dmesg ? Jinak opravdu ta ctecka neni v seznamu USB zarizeni, predpokladam ze asi bude problem s jadrem a ze ji system vubec nerozpozna.

[hopic]

Po pripojeni flashky se objevi tohle:

[ 2015.126574] usb 1-3: USB disconnect, address 5
[ 2032.860162] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 2033.015231] usb 1-3: configuration #1 chosen from 1 choice

najde se nekdo kdo vi co dal aby se ctecka objevila?

[hopic]

Tak problém pořád stejný, systém samozřejmě aktualizuji a doufám že se to rozběhne, testováno s více flashkami, ale pořád totéž. Pokud někdo víte, dejte pls vědět...

[petergula]

a ked mas pripojenu flashku uz pri starte ntbk tak tiez nejde?

[hopic]

Bohuzel ani pri vlozeni -> zapnuti - nic:(

[hopic]

nejaky dalsi napady by nebyly?

[hopic]

card reader stale nefunkcni, nenapada nekoho reseni?