Autor Téma: Grub versus grub 2 (Přečteno 4029 krát)

phplus · « **kdy:** 16 Září 2010, 14:54:16 »

Chtěl bych se podělit o několik zkušeností a požádat o pomoc. Užívám na svém PC celkem 5 dister, Sabayon 5.3 KDE, Kubuntu 10.10., openSUSE 11.3., PCLinuxOS a Mandrivu 2010.1. Problém je ale s grubem. Pouze Sabayon a Kubuntu najdou při instalaci všechna ostatní distra a zahrnou je do grubu. Ovšem ne správně. U směrování na jednotlivé oddíly disku je u initrd číslo oddílu nesprávné, např. místo hd 0,5 je hd 0,4. Já to musím v krusaderu přepsat, nakopírovat do etc/default/grub a pak ona distra bootují. Myslím si, že jde o konflikt mezi grubem a grubem 2 ale zřejmě nejen to. Věděl by někdo, čím je onen problém způsoben a jak jej systémově řešit? Děkuji.

compaq · « **Odpověď #1 kdy:** 16 Září 2010, 15:37:46 »

Může to být tím, že grub, který používáš nezná ext4, který mají některý oddíly.

phplus · « **Odpověď #2 kdy:** 16 Září 2010, 16:43:06 »

Ty distra mají ext4 všechna, tím to nebude.

arrange · « **Odpověď #3 kdy:** 16 Září 2010, 17:04:15 »

Dáš tady výstup z boot_info_script?

phplus · « **Odpověď #4 kdy:** 16 Září 2010, 22:51:57 »

Kód: [Vybrat]

[bin/bash
VERSION=0.55
DATE="February 15th, 2010"
#to use this script:
#
#     sudo bash boot_info_script055.sh
#or
#     su -
#     bash boot_info_script055.sh
#
#
### last-modified 
#
#author  Ulrich Meierfrankenfeld (aka meierfra.) 
# with  contributions from caljohnsmith
# (both members of ubuntuforums.org)
# and Gert Hulselmans
#
#hosted at: http://sourceforge.net/projects/bootinfoscript/
# 
#The birth of the boot info script:
#   http://ubuntuforums.org/showthread.php?t=837791
#
#Looks at all MBRs and identifies the boot loader. 
#   For Grub and Supergrub:  displays the controlling partition.
#   If the  MBR is unknown, displays the whole MBR.
#Looks at all  partitions:
#   Determines their type
#   Identifies their boot sectors.
#         For grub: displays the controlling partition and the offset
#         of the stage2 file as recorded in the boot sector.
#         For NTFS and Fat, examines the Boot Parameter Block for errors.
#   Identifies the operating system
#   Lists  boot programs.
#   Displays the partition table
#   Displays "blkid -c /dev/null"
#   Finds  boot directories and displays their contents.
#   Looks in "/" and "NST" for  bootpart codes  and displays the offset
#                and boot drive it is trying to chainload
#   Looks on "/" and "/NST" for stage1 files and displays the offset
#         and bootdrive of the stage 2  files is trying to chainload.
#   Displays  boot configuration files.
#   Is able to search LVM partitions if  the LVM2 package is install
#      ("apt-get install lvm2"  in debian based  distros)
#   Is able to search Linux Software Raid partitions (MD Raids) if
#       the "mdadm" package is installed.
#   If dmraid is installed, searches all raid drives, detected by dmraid.
#All information is written to the file "RESULTS.txt" in the
#    same folder as the script. But  when run from /bin, /sbin, /usr/bin,
#    or  other system folder the file "RESULTS.txt" is written to the
#    home directory of the user who runs this script.


###### Display version and date of the script when asked:
# ./boot_info_script -v
# ./boot_info_script -V
# ./boot_info_script --version 
if [ x"$1" = x'-v' ] || [ x"$1" = x'-V' ] || [ x"$1" = x'--version' ] ;
then 
    echo "boot_info_script version $VERSION"
    echo "Dated , $DATE"
    exit 0
fi 


###### Check if all necessary programs are available

Programs="
    awk
    basename
    blkid
    cat
    dd
    dirname
    expr
    fdisk
    filefrag
    fold
    grep
    hexdump
    losetup
    ls
    mkdir
    mount
    pwd
    rm
    sed
    sort
    umount
    wc
    whoami"

Check_Prog=1;

for Program in $Programs ; do

    if ! type $Program > /dev/null 2>&1 ; then
    echo \"$Program\" could not be found. >&2
    Check_Prog=0;
    fi
done

if [ $Check_Prog -eq 0 ];
then
   echo "Please install the  missing program(s) and run boot_info_script again." >&2
   exit 1;
fi;




###### check whether user is root

if [ $(whoami) != "root" ];
then 
   echo  Please use \"sudo\" or become \"root\" to run this script. >&2;
   exit 1;
fi;  

########  List of folders which might contained files used for chainloading
Boot_Codes_Dir="
    /
    /NST/
    "
#################  List of folders whose content will be displayed
################# Since all the important files in these folder are already displayed
################# it doesn't seem necessary to display the contents of these folders.
#Boot_Dir="
#   /Boot
#    /boot
#    /BOOT
#    /boot/grub
#    /grub
#    /ubuntu/disks
#    /ubuntu/disks/boot/
#    /ubuntu/disks/boot/grub
#    /ubuntu/disks/install/boot
#    /ubuntu/disks/boot/grub
#    /NST
#    "


##############  List of files whose names will be displayed (if they exists)
Boot_Prog_Normal="
     /bootmgr /BOOTMGR
     /boot/bcd /BOOT/bcd /Boot/bcd  /boot/BCD /BOOT/BCD  /Boot/BCD
     /Windows/System32/winload.exe /WINDOWS/system32/winload.exe /WINDOWS/SYSTEM32/winload.exe /windows/system32/winload.exe
     /Windows/System32/Winload.exe /WINDOWS/system32/Winload.exe /WINDOWS/SYSTEM32/Winload.exe /windows/system32/Winload.exe
     /grldr /GRLDR
     /ntldr /NTLDR
     /NTDETECT.COM    /ntdetect.com
     /NTBOOTDD.SYS    /ntbootdd.sys
     /wubildr.mbr    /ubuntu/winboot/wubildr.mbr
     /wubildr    /ubuntu/winboot/wubildr
     /ubuntu/disks/root.disk
     /ubuntu/disks/home.disk
     /ubuntu/disks/swap.disk
     /core.img   /grub/core.img     /boot/grub/core.img
     /boot/map      /map
     /DEFAULT.MNU /default.mnu
     /IO.SYS /io.sys
     /MSDOS.SYS /msdos.sys 
     /COMMAND.COM /command.com
     "
Boot_Prog_Fat="
      /bootmgr
     /boot/bcd
     /Windows/System32/winload.exe
     /grldr
     /ntldr 
     /NTDETECT.COM 
     /NTBOOTDD.SYS
     /wubildr.mbr 
     /wubildr  
     /ubuntu/winboot/wubildr
     /ubuntu/winboot/wubildr.mbr
     /ubuntu/disks/root.disk
     /ubuntu/disks/home.disk
     /ubuntu/disks/swap.disk
     /core.img   /grub/core.img     /boot/grub/core.img
     /boot/map      /map
     /DEFAULT.MNU
     /IO.SYS 
     /MSDOS.SYS
     /COMMAND.COM
     "



############### List of files whose contents will be displayed.
Boot_Files_Normal="
    /boot/grub/menu.lst /grub/menu.lst  /NST/menu.lst    /menu.lst
    /grub.cfg    /grub/grub.cfg    /boot/grub/grub.cfg
    /ubuntu/disks/boot/grub/menu.lst /ubuntu/disks/install/boot/grub/menu.lst /ubuntu/winboot/menu.lst
    /boot/grub/grub.conf    /grub/grub.conf    /grub.conf
    /boot.ini  /BOOT.INI
    /etc/fstab
    /etc/lilo.conf  /lilo.conf
    "

Boot_Files_Fat="
    /boot/grub/menu.lst /grub/menu.lst  /NST/menu.lst    /menu.lst
    /grub.cfg    /grub/grub.cfg    /boot/grub/grub.cfg
    /ubuntu/disks/boot/grub/menu.lst /ubuntu/disks/install/boot/grub/menu.lst /ubuntu/winboot/menu.lst
    /boot/grub/grub.conf    /grub/grub.conf    /grub.conf
    /boot.ini  
    /etc/fstab
    /etc/lilo.conf  /lilo.conf
    "

############### List of files whose end point (in GB) will be displayed.
GrubError18_Files="
    boot/grub/menu.lst    grub/menu.lst    menu.lst /NST/menu.lst
    ubuntu/disks/boot/grub/menu.lst
    boot/grub/grub.conf    grub/grub.conf    grub.conf
    grub.cfg    grub/grub.cfg    boot/grub/grub.cfg
    core.img    grub/core.img   boot/grub/core.img
    boot/grub/stage2    grub/stage2    stage2
    boot/vmlinuz*  vmlinuz*    ubuntu/disks/boot/vmlinuz*
    boot/initrd*  initrd*    ubuntu/disks/boot/initrd*
    boot/kernel*.img
    initramfs* boot/initramfs*
    "


#######  Directory containing the script.

Dir=$(cd "$(dirname "$0")";pwd);

# Set $Dir to the home folder of the current user if the script is in one of the
# system folders
# This allows placement of the script in /bin, /sbin, /usr/bin, ...
# while still having a normal location to write the output file.
for systemdir in /bin /boot /cdrom /dev /etc /lib /lost+found /opt /proc /sbin /selinux /srv /sys /usr /var; do
    if [ $(expr "$Dir" : $systemdir) -ne 0 ]; then
	Dir="$HOME"
	break
    fi
done

########  To avoid overwriting existing files, look for a non-existing file 
########  RESULT.txt RESULTS1.txt  RESULTS2.txt ... 

LogFile="${Dir}/RESULTS"
while ( [ -e "${LogFile}${j}.txt" ] )
    do 
       if [ "j" = "" ]; then j=0; fi;
       j=$((j+1));
      wait;
    done
LogFile="${LogFile}${j}.txt"  #### The RESULTS file.

######  Redirect stdout to RESULT File
#exec 6>&1   
#exec > "$LogFile"

########### Create previously non-existing  folder of the form
##########  /tmp/BootInfo  /tmp/BootInfo1, /tmp/BootInfo2 ... 

Folder=/tmp/BootInfo
i=0;
while (! mkdir ${Folder}${i} 2>/dev/null)
    do  
      i=$((i+1));
      wait;
    done
Folder=${Folder}${i}

cd $Folder
Log=$Folder/Log                 #File to record the summary.
Log1=$Folder/Log1               #  Most of the information which is not part of
                                #the summary is recorded in this file.
Error_Log=$Folder/Error_Log     #  File to catch all unusal Standar Errors 
Trash=$Folder/Trash             #  File to catch all usual Standard Errors
                                #     these messagges will not be included in the RESULTS       
Mount_Error=$Folder/Mount_Error # File to catch Mounting Errors
Unknown_MBR=$Folder/Unknown_MBR # File to record all unknown MBR and Boot sectors. 
Tmp_Log=$Folder/Tmp_Log         # File to temporarily hold some information.
PartitionTable=$Folder/PT       # File to store the Partition   Table
FakeHardDrives=$Folder/FakeHD   # File to list devices which seem to have  no corresponding drive.
BLKID=$Folder/BLKID             # File to store the output of blkid
exec 2>$Error_Log               #Redirect all standard error to the file Error_Log

All_Hard_Drives=$(ls /dev/hd? /dev/sd? 2>>$Trash );   ### List of all Hard drives.


if type dmraid >>$Trash 2>>$Trash;
then
  InActiveDMRaid=$(dmraid -si -c);
  if  [ "$InActiveDMRaid" = "no raid disks" ];
  then 
      InActiveDMRaid="";
  fi;
  if  [ "$InActiveDMRaid" != "" ];
  then
      dmraid -ay $InActiveDMRaid >>$Trash;
  fi;
  if [ "$(dmraid -sa -c)" != "no raid disks" ];
  then
       All_DMRaid=$(dmraid -sa -c|awk '{print "/dev/mapper/"$0}');
       All_Hard_Drives=${All_Hard_Drives}" "${All_DMRaid};
  fi;   
fi;

####Arrays to hold information about Partitions: name, starting sector, ending sector, size in sector, Partition Type, Filesystem typ, UUID, Kind(Logical, Primary, Extended), HardDrive, boot flag,  parent (for logical partitions), label, system(the partition id according the partition table), the device associate to the partition.

declare -a NamesArray StartArray EndArray SizeArray TypeArray  FileArray UUIDArray KindArray DriveArray BootArray ParentArray LabelArray SystemArray DeviceArray  


#####Arrays to hold information about the harddrives.
declare -a HDName  FirstPartion LastPartition  HDSize HDMBR HDHead HDTrack HDCylinder HDPT HDStart HDEnd HDUUID;

####Array for Hard drives formated as Filesystem 
declare -a FilesystemDrives;


PI=-1 ## Counter for the identification number of a partition. (each partition gets unique number)
HI=0 ## Counter for the identification number of a hard drive. (each hard drive gets unique number)
PTFormat='%-10s %4s%14s%14s%14s %3s %s\n';  ### standard format to use for Partition table,


####  fdisk -s seems to malfunction sometimes. So use sfdisk -s if available
function fdisks (){
if type sfdisk >>$Trash 2>>$Trash
then
   sfdisk -s "$1" 2>>$Trash;
else
   fdisk -s "$1" 2>>$Trash;
fi;
}
   


#####  A function which checks whether a file is on a mounted partition 
MountPoints=$(mount | grep -e ^/dev |awk '{print $3}' |grep -v  ^/$); ##list of mountpoints for devices
 
function FileNotMounted (){
local File=$1 curmp=$2;      
for mp in $MountPoints; 
do 
 if [ $(expr match "$File" "$mp""/" ) -ne 0 ] && [ "$mp" != "$curmp" ]
 then 
   return 1; 
 fi;
done;
return 0;
}

##### A function which converts the  two digit hexcode of a partition type 
# The following list is taken from sfdisk -T  and 
#  http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
#  work in progress
function HexToSystem () {
local type=$1 system
case $type in 
0) system="Empty";;
1) system="FAT12";;
2) system="XENIX root";;
3) system="XENIX usr";;
4) system="FAT16 <32M";;
5) system="Extended";;
6) system="FAT16";;
7) system="HPFS/NTFS";;
8) system="AIX";;
9) system="AIX bootable";;
a) system="OS/2 Boot Manager";;
b) system="W95 FAT32";;
c) system="W95 FAT32 (LBA)";;
e) system="W95 FAT16 (LBA)";;
f) system="W95 Ext d (LBA)";;
10) system="OPUS";;
11) system="Hidden FAT12";;
12) system="Compaq diagnostics";;
14) system="Hidden FAT16 <32M";;
16) system="Hidden FAT16";;
17) system="Hidden HPFS/NTFS";;
18) system="AST SmartSleep";;
1b) system="Hidden W95 FAT32";;
1c) system="Hidden W95 FAT32 (LBA)";;
1e) system="Hidden W95 FAT16 (LBA)";;
24) system="NEC DOS";;
27) system="Hidden HPFS/NTFS";;
32) system="NOS";;
35) system="JFS on OS2";;
38) system="Theos";;
39) system="Plan 9";;
3a) system="Theos";;
3b) system="Theos Extended";;
3c) system="PartitionMagic recovery";;
40) system="Venix 80286";;
41) system="PPC PReP Boot";;
42) system="SFS";;
45) system="Boot-US boot manager";;
4d) system="QNX4.x";;
4e) system="QNX4.x 2nd part";;
4f) system="QNX4.x 3rd part";;
50) system="OnTrack DM";;
51) system="OnTrack DM6 Aux1";;
52) system="CP/M";;
53) system="OnTrack DM6 Aux3";;
54) system="OnTrackDM6";;
55) system="EZ-Drive";;
56) system="Golden Bow";;
5c) system="Priam Edisk";;
61) system="SpeedStor";;
63) system="GNU HURD or SysV";;
64) system="Novell Netware 286";;
65) system="Novell Netware 386";;
70) system="DiskSecure Multi-Boot";;
75) system="PC/IX";;
80) system="Old Minix";;
81) system="Minix / old Linux";;
82) system="Linux swap / Solaris";;
83) system="Linux";;
84) system="OS/2 hidden C: drive";;
85) system="Linux extended";;
86) system="NTFS volume set";;
87) system="NTFS volume set";;
88) system="Linux plaintext";;
8e) system="Linux LVM";;
93) system="Amoeba/Accidently Hidden Linux";;
94) system="Amoeba BBT";;
9f) system="BSD/OS";;
a0) system="IBM Thinkpad hibernation";;
a5) system="FreeBSD";;
a6) system="OpenBSD";;
a7) system="NeXTSTEP";;
a8) system="Darwin UFS";;
a9) system="NetBSD";;
ab) system="Darwin boot";;
af) system="HFS";;
b0) sytem="Boot Star";;
b1 | b2 | b3 | b4 | b6) system="SpeedStor";; 
b7) system="BSDI fs";;
b8) system="BSDI swap";;
bb) system="Boot Wizard hidden";;
bc) system="Acronis BackUp";;
be) system="Solaris boot";;
bf) system="Solaris";;
c0) system="CTOS";;
c1) system="DRDOS/sec (FAT-12)";;
c2) system="Hidden Linux/PowerBoot";;
c3) system="Hidden Linux Swap /PowerBoot";;
c4) system="DRDOS/sec (FAT-16 < 32M)";;
c6) system="DRDOS/sec (FAT-16)";;
c7) system="Syrinx";;
cb) system="DR-DOS  FAT32 (CHS)";;
cc) system="DR-DOS  FAT32 (LBA)";;
cd) system="CTOS Memdump?";;
ce) system="DR-DOS FAT16X (LBA)";;
cf) system=" DR-DOS EXT DOS (LBA)";;
d0) system=" REAL/32 secure big partition";;
da) system="Non-FS data";;
db) system="CP/M / CTOS / ...";;
dd) system="Dell Media Direct";;
de) system="Dell Utility";;
df) system="BootIt";;
e1) system="DOS access";;
e3) system="DOS R/O";;
e4) system="SpeedStor";;
eb) system="BeOS fs";;
ee) system="GPT";;
ef) system="EFI (FAT-12/16/32)";;
f0) system="Linux/PA-RISC boot";;
f1) system="SpeedStor";;
f4) system="SpeedStor";;
f2) system="DOS secondary";;
fb) system="VMware VMFS";;
fc) system="VMware VMKCORE";;
fd) system="Linux raid autodetect";;
fe) system="LANstep";;
ff) system="BBT";;
 *) system="Unknown";;
esac;
echo $system;
}

##### Function to convert GPT's Partition Type.
####  ABCDEFGH-IJKL-MNOP-QRST-UVWXYZabcdef is stored as
####  GHEFCDAB-KLIJ-OPMN-QRST-UVWXYZabcdef (without the dashes)
function UUIDToSystem() {
local type=$1 system
case $type in
    00000000000000000000000000000000)  system="Empty";;
    41ee4d02e733d3119d690008c781f39f)  system="MBR partition scheme";;
    28732ac11ff8d211ba4b00a0c93ec93b)  system="System/Boot Partition";;
    a2a0d0ebe5b9334487c068b6b72699c7)  system="Linux or Data";; 
    6dfd5706aba4c44384e50933c84b4f4f)  system="Linux Swap";;
    16e3c9e35c0bb84d817df92df00215ae)  system="Microsoft Windows";;
    79d3d6e607f5c244a23c238f2a3df928)  system="LVM";;
    005346480000aa11aa1100306543ecac)  system="HFS+";;
    4861682149646f6e744e656564454649)  system="Bios Boot Partition";;
                                   *)  system="-";
                                       echo Unknown GPT Partiton Type>>$Unknown_MBR;
                                       echo  $type >>$Unknown_MBR;;   
esac;
echo $system;
   }

##### Function which insert a comma every  third digit of a number
function InsertComma () {
echo $1 |sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{3\}\)/\1,\2/;ta'
}

##### Function to read 4 bytes starting at $1 of device $2 and convert to decimal.
function Read4Bytes () {
echo $(hexdump -v -s  $1  -n 4 -e '4 "%u"'  $2);
}

##### Function to read 8 bytes starting at $1 of device $2 and convert to decimal.
function Read8Bytes () {
local start=$1 device=$2;
local first4 second4;
first4=$(hexdump -v -s  $start  -n 4 -e '4 "%u"'  $device);
second4=$(hexdump -v -s  $((start+4))  -n 4 -e '4 "%u"'  $device);
echo $((second4*1073741824+first4));
}

#### Functions to pretty print blkid output ######
BlkidFormat='%-16s %-38s %-10s %-30s\n'
BlkidTag (){
echo $(blkid -c /dev/null -s $2 -o value $1 2>>$Trash)
}

PrintBlkid (){
local part=$1;
if  [  "$(blkid -c /dev/null $part  2>$Tmp_Log)"  != "" ];
then
printf "$BlkidFormat" "$part"  "$(BlkidTag $part UUID)"  "$(BlkidTag  $part TYPE)" "$(BlkidTag $part LABEL)">>$BLKID;
else blkid  -p "$part"  2>&1 |grep "$part" >>$BLKID; #blkid -p is not avaible all all systems. This contructs makes sure the "usage" message is not displayed, but catches the "ambivalent" error.
fi;
}


## Reads and display the  a partition table of an extended partitons    ###########
#############  and check the partition  check for errors         #####################
#  This function can be applied iteratively  to read the extended partiton table           
# Variable 1:  HI of hard drive 
# Variable 2:  Start Sector of the extended Partition,
# Variable 3:  Number of partitions in table (4 for regular PT, 2 for logical
# Variable 4:  File for storing the partitions table.
# Variable 5:  Format to use for displaying the partition table.  
# Variable 6:  PI of the primary extended partition containing the extended partition.
#              ( equals ""  for hard drive)
# Variable 7:  Last Linux Index assigned (the number in sdXY).

ReadPT (){
local HI=$1 StartEx=$2   N=$3 PT_file=$4 format=$5  EPI=$6 Base_Sector  
local   LinuxIndex=$7  boot  size   start end type drive system;
local i=0  boot_hex label limit MBRSig
drive=${HDName[$HI]};
limit=${HDSize[$HI]};
$(dd if=$drive skip=$StartEx of=$Tmp_Log count=1 2>>$Trash);
MBRSig=$(hexdump -v -s 510  -n 2 -e '"%x"'  $Tmp_Log);
[[ "$MBRSig" != "aa55" ]]  && echo  Invalid MBR Signature found >> $PT_file;
if [[ $StartX -lt $limit ]];
then  # set Base_Sector to 0 for HardDrive, and to the start
      # sector  of primary extended partition otherwise
    [[ "$EPI" = "" ]] && Base_Sector=0 || Base_Sector=${StartArray[$EPI]}
    for (( i=0; i < N; i++ ));
    do
	$(dd if=$drive skip=$StartEx of=$Tmp_Log count=1 2>>$Trash);
        boot_hex=$(hexdump -v -s  $((446+16*i))  -n  1 -e '"%02x"'  $Tmp_Log)
	case $boot_hex  in
	    00) boot=" ";;
	    80) boot="* ";;
	    *) boot="?";;
	esac;
	start=$(hexdump -v -s  $((454+16*i))  -n 4 -e '4 "%u"'  $Tmp_Log);
	size=$(hexdump -v -s  $((458+16*i))  -n 4 -e '4 "%u"'  $Tmp_Log);
	type=$(hexdump -v  -s  $((450+16*i))  -n 1 -e '4 "%x"' $Tmp_Log);
	if  [[ $size != 0 ]];
	then
	    if  [[ ( "$type" = "5" || "$type" = "f" )  && $Base_Sector != 0 ]];
	    then
		start=$((start+Base_Sector))  #start sector of an extended partition is 
                # relative to the start sector of an primary extended partition.
               if [[  $i = 0 ]];
                   then
                      echo "Extended  partition  linking to another extended partition" >>$PT_file;
                   fi;
		ReadPT $HI $start  2  $PT_file "$format"  $EPI $LinuxIndex;
	    else  
		((PI++))  
		if  [[ "$type" = "5" || "$type" = "f" ]];
		then
                    KindArray[$PI]="E";
		else
		    start=$((start+StartEx)); #Start sector of a logical partition is
            # relative to the start sector of directly assocated  extented partition.
		    [[ $Base_Sector = 0 ]] && KindArray[$PI]="P" || KindArray[$PI]="L";
		fi;
		LinuxIndex=$((LinuxIndex+1));
		end=$((start+size-1));
		[[ "${HDPT[$HI]}"  = "BootIt"  ]] &&  label="${NamesArray[$EPI]}""_" || label=$drive;
		system=$(HexToSystem $type)

		printf "$format" "$label$LinuxIndex" "$boot" $(InsertComma $start) "$(InsertComma $end)"  "$(InsertComma $size)"  "$type" "$system" >> $PT_file;
		NamesArray[$PI]="$label"$LinuxIndex;
		StartArray[$PI]=$start;
		EndArray[$PI]=$end;
		TypeArray[$PI]=$type;
		SystemArray[$PI]="$system";
		SizeArray[$PI]=$size;
		BootArray[$PI]="$boot";
		DriveArray[$PI]=$HI;
		ParentArray[$PI]=$EPI;
                ( [[ "$EPI" = "" ]] || [[ ${DeviceArray[$EPI]} != "" ]] ) && DeviceArray[$PI]=$drive$LinuxIndex; 

		if [[ "$type" = "5" || "$type" = "f" ]];
		then
                      ReadPT $HI $start  2  $PT_file "$format"  $PI 4;
		fi;
	    fi;
       
	elif [[ $Base_Sector != 0  &&  $i = 0  ]];
	then
	    echo "Empty Partition">>$PT_file;
	else 
	    LinuxIndex=$((LinuxIndex+1));
	fi;
    done;
else
    echo "EBR refers to a  location outside the Hard drive" >>$PT_file;
fi;  
}
############### Read partition table of type GPT (GUID, EFI)##########################
######  Variable 1:  HI of hard drive
######  Variable 2:  File to store the PartitionTable
function ReadEFI() {
    local HI=$1 drive file=$2 Size N=0 i=0  format Label PRStart Start End  Type Size System;
    drive="${HDName[$HI]}";
    format='%-10s %14s%14s%14s %s\n';
    printf "$format"  Partition Start End Size  System >> $file;
    HDStart[$HI]=$(Read8Bytes  552   $drive);
      HDEnd[$HI]=$(Read8Bytes  560   $drive);
     HDUUID[$HI]=$(hexdump -v -s 568   -n 16 -e '/1 "%02x"'  $drive); 
         PRStart=$(Read8Bytes  584    $drive);
               N=$(Read4Bytes  592   $drive);
          PRStart=$((PRStart*512));
          PRSize=$(Read4Bytes 596    $drive);
    for (( i = 0; i< N; i++ ))
    do
        Type=$(hexdump -v -s $((PRStart+PRSize*i))  -n 16 -e '/1 "%02x"'  $drive);
    if [ "$Type" != "00000000000000000000000000000000" ];
    then
        ((PI++))
        Start=$(Read8Bytes $((PRStart+32+PRSize*i))   $drive);
	  End=$(Read8Bytes $((PRStart+40+PRSize*i))   $drive);
        Size=$((End-Start+1));
        System=$(UUIDToSystem $Type);
        Label=$drive$((i+1));
        printf "$format"  "$Label"  "$(InsertComma $Start)" "$(InsertComma $End)" "$(InsertComma $Size)"  "$System"  >>$file;
        NamesArray[$PI]=$Label;
        DeviceArray[$PI]=$Label;
        StartArray[$PI]=$Start;
        TypeArray[$PI]=$Type;
        SizeArray[$PI]=$Size;
        SystemArray[$PI]=$System;
        EndArray[$PI]=$End;
        DriveArray[$PI]=$HI;
        KindArray[$PI]="P";
        ParentArray[$PI]=""; 
     fi;        
     done;
}

############### Read the Master Partition Table of  BootIt NG##########################
######  Variable 1:  HI of hard drive
######   Variable 2:  File to store the MPT.
function ReadEMBR() {
    local HI=$1 drive MPT_file=$2 Size N=0 i=0  BINGIndex  Label   Start End  Type BINGUnknown format Size System StoredPI FirstPI=FirstPartition[$1] LastPI=$PI New;
    drive="${HDName[$HI]}";
    format='%-18s %4s%14s%14s%14s %3s %-15s %3s %2s\n';
    printf "$format"  Partition Boot Start End Size Id System  Ind "?">> $MPT_file; 
    N=$(hexdump -v -s 534  -n 1 -e  '"%u"' $drive); 
    while [[ $i -lt "$N" ]]
	do
        New=1;
        BINGUnknown=$(hexdump -v -s  $((541+28*i))  -n 1 -e '"%x"'  $drive)
	Start=$(hexdump -v -s  $((542+28*i))  -n 4 -e '4 "%u"'  $drive);
	  End=$(hexdump -v -s  $((546+28*i))  -n 4 -e '4 "%u"'  $drive);
	BINGIndex=$(hexdump -v -s  $((550+28*i))  -n 1 -e '"%u"'  $drive);
	Type=$(hexdump -v -s  $((551+28*i))  -n 1 -e '"%x"'  $drive);
        Size=$((End-Start+1));
	Label=$(hexdump -v -s  $((552+28*i))  -n 15 -e '"%_u"'  $drive| sed -e  s/nul[^$]*//);
        System=$(HexToSystem $Type);
        printf "$format"  "$Label" "-" "$(InsertComma $Start)" "$(InsertComma $End)" "$(InsertComma $Size)" "$Type" "$System"  "$BINGIndex" "$BINGUnknown">>$MPT_file;
         StoredPI=$PI;
         for ((j = FirstPI; j<=LastPI; j++ ));
           do
              if (( ${StartArray[$j]} == $Start ));
	      then 
                    PI=$j;
                    New=0; 
                    break;
              fi;
           done;
         
         if (( $New  == 1 ));
         then
           ((PI++));
           StoredPI=$PI;
           StartArray[$PI]=$Start;
           TypeArray[$PI]=$Type;
           SizeArray[$PI]=$Size;
           SystemArray[$PI]=$System;
           EndArray[$PI]=$End;
           DriveArray[$PI]=$HI;
         fi;
         NamesArray[$PI]=$Label;
  
         if [[ $Type = "f" || $Type = "5" ]];
	    then
                 KindArray[$PI]="E";
                 ParentArray[$PI]=$PI;
		 ReadPT $HI  $Start  2  $MPT_file "$format"  $PI  4 ;  
            else
                KindArray[$PI]="P";
                ParentArray[$PI]="";
	    fi;
          PI=$StoredPI;
         ((i++));
       	done;
}

#################   Check partition table for errors  ################################
###  
###  This function checks whether any two partitions  overlap
###  and the logical partitions are inside the extended partition.
###  Variable 1:        PI of First partition to consider
###  Variable 2:        PI of Last Partition to consider
###  Variable 3:        File for the error messages.
###  Variable 4:        HI of containing hard drive
 CheckPT () {
    local  first=$1 last=$2 file=$3;  hi=$4;
    local  Si Ei Sj Ej Ki  Kj i j k cyl track head cyl_bound sec_bound
    cyl=${HDCylinder[$hi]};
    track=${HDTrack[$hi]};
    head=${HDHead[$hi]};
    cyl_bound=$((cyl*track*head));
    sec_bound=${HDSize[$hi]};
    for (( i=$first; i <= last; i++ ));
    do
         Si=${StartArray[$i]};
         Ei=${EndArray[$i]};
         Ki=${KindArray[$i]};
         Ni=${NamesArray[$i]};
         if [[ "$Ei" -gt "$sec_bound"  ]];
	 then
	     echo $Ni  ends after the last sector of ${HDName[$hi]}>>$file;
         elif  [[ "$Ei" -gt "$cyl_bound"  ]]
	 then
	     echo $Ni ends after the last cylinder of ${HDName[$hi]}>>$Trash;
         fi;
         if [[ $Ki = "L" ]];
	 then
	     k=${ParentArray[$i]};
            Sk=${StartArray[$k]};
            Ek=${EndArray[$k]};
            Nk=${NamesArray[$k]};
            [[ $Si -le $Sk || $Ei -gt $Ek ]] &&  echo  the logical partition  $Ni is not contained in the extended partition  $Nk>>$file;
         fi;
         for (( j = i+1; j <= last; j++ ));
	 do 
            Sj=${StartArray[$j]};
            Ej=${EndArray[$j]};
            Kj=${KindArray[$j]};
            Nj=${NamesArray[$j]};
            [[ !( ( $Ki = "L" && $Kj = "E"  )  || ( $Ki = "E" && $Kj = "L"  ) ) && ( ( $Si -lt $Sj &&   $Sj  -lt $Ei )  || ($Sj  -lt $Si && $Si -lt $Ej ) )]] && echo   $Ni overlaps with   $Nj >>$file;
          done;
    done
}

#############################################################################################
##########  Determine the embeded location of stage 2  in a stage 1 file,
##########  look  for the stage 2 and, if found, determine the
#########$  the location and the path of the embedded menu.lst

stage2_loc (){
  local stage1=$1 hi;
  offset=$(hexdump -v -s 68 -n 4 -e '4 "%u"' $stage1 2>>$Trash);
  dr=$(hexdump -v -s 64 -n 1 -e '"%d"' $stage1);
  pa="T"
  Grub_Version="";
  for hi in ${!HDName[@]};
  do
     hdd=${HDName[$hi]};
     if [ $offset -lt  ${HDSize[hi]}  ];
     then
	 tmp=$(dd if=$hdd skip=$offset count=1 2>>$Trash | hexdump -v    -n 4 -e '"%x"');
         if [[ "$tmp" = 3be5652 || "$tmp" =  bf5e5652  ]];  ###  If stage2 files was found.
         then
              dd if=$hdd skip=$((offset+1)) count=1 of=$Tmp_Log 2>>$Trash;
              pa=$(hexdump -v  -s 10  -n 1 -e '"%d"' $Tmp_Log);
              stage2_hdd=$hdd;
              Grub_String=$(hexdump -v -s 18 -n 94 -e '"%_u"' $Tmp_Log);
              Grub_Version=$(echo $Grub_String|sed -e  s/nul[^$]*//);
              BL=$BL$Grub_Version;
              menu=$(echo $Grub_String |sed -e  s/[^\/]*// -e s/nul[^$]*//);
              menu=${menu%% *};
         fi;
     fi;
 done;
 dr=$((dr-127))
 Stage2_Msg=$(echo  looks at sector $offset )        
 if [ "$dr" = 128 ];
 then
      Stage2_Msg=$(echo $Stage2_Msg of the same hard drive) 
 else
      Stage2_Msg=$(echo $Stage2_Msg on boot drive \#$dr)
 fi;
 Stage2_Msg=$(echo $Stage2_Msg for the stage2 file);
                    
 if [ "$pa" = "T"  ]   #### no stage 2 file found.
 then
      Stage2_Msg=$(echo $Stage2_Msg, but no stage2 files can be found at this location.); 
 else
     pa=$((pa+1))
     Stage2_Msg=$(echo $Stage2_Msg.  A stage2 file is at  this location on $stage2_hdd.  Stage2 looks on )                       
     if [ "$pa" = 256 ];
     then
         Stage2_Msg=$(echo $Stage2_Msg the same partition) 
     else
         Stage2_Msg=$(echo $Stage2_Msg  partition \#$pa )
     fi;
     Stage2_Msg=$(echo $Stage2_Msg for  $menu.)
  fi;
}
#######################################################################################

#############################################################################################
##########  Determine the embeded location of core.img  for a Grub2 boot.img file,
##########  look  for the core.img and,  the path of the Grub Folder.
#############################################################################

core_loc (){
  local stage1=$1  grub2_version=$2  hi offset_loc dr_loc dir_loc;
  case $grub2_version in
  1.96) offset_loc=68;  dr_loc=76; dir_loc=32;;
  1.97) offset_loc=92;  dr_loc=91; dir_loc=28;;
  esac;
  offset=$(hexdump -v -s $offset_loc -n 4 -e '4 "%u"' "$stage1" 2>>$Trash);
  dr=$(hexdump -v -s $dr_loc -n 1 -e '"%d"' "$stage1");
  pa="T"
    for hi in ${!HDName[@]};
  do
     hdd=${HDName[$hi]};
     if [ $offset -lt  ${HDSize[hi]}  ];
     then
	 tmp=$(dd if="$hdd" skip=$offset count=1 2>>$Trash | hexdump -v    -n 4 -e '"%x"');
         if [ "$tmp" = 1bbe5652 ];  ###  If conf.img  file was found.
         then
              dd if=$hdd skip=$((offset+1)) count=1 of=$Tmp_Log 2>>$Trash;
              pa=$(hexdump -v  -s 20  -n 1 -e '"%d"' $Tmp_Log);
              core_hdd=$hdd;
	      Grub_String=$(hexdump -v -s $dir_loc -n 64 -e '"%_u"' $Tmp_Log);
              Core_Dir=$(echo  $Grub_String | sed s/nul[^$]*//);
         fi;
     fi;
 done;
 Core_Msg=$(echo  looks at sector $offset of the same hard drive for core.img) 

 if [ "$pa" = "T"  ]   
 then  #### core.img not  found.
     Core_Msg=$(echo $Core_Msg, but core.img can not be found at this location.); 
 else  #### core.img  found.            
     pa=$((pa+1))
     Core_Msg=$(echo $Core_Msg,  core.img is  at this location on $core_hdd and looks  )                       
     if [ "$pa" = 255 ];
     then
         Core_Msg=$(echo $Core_Msg for $Core_Dir.) 
     else
         Core_Msg=$(echo $Core_Msg on  partition \#$pa  for  $Core_Dir.)
     fi;
  
  fi;
}
#######################################################################################

###############  Get_Partition_Info search a partition for information relevant for booting.
####Variables:
####  log         $1  local version of RESULT.txt####  log1        $2  local version of log1
####  part        $3  device for the partition
####  name        $4  descriptive name for the partition
####  mountname   $5  path where  partition will be mounted.
###   kind        $6  kind of the partition
###   start       $7  starting sector of the partition
###   end         $8  ending sector of the partition
###   system      $9  system of the partition
###   pi          $10  pi of the partition, (equal to "" if not a regular partition. 
Get_Partition_Info(){
local Log="$1" Log1="$2" part="$3" name="$4" mountname="$5"  kind="$6"  start="$7"  end="$8" system="$9" pi="${10}";
local size=$((end-start)) BST=""  BSI=""  BFI=""  OS="" BootFiles="";]

phplus · « **Odpověď #5 kdy:** 16 Září 2010, 22:56:48 »

Kód: [Vybrat]

[               00)   sig2=$(hexdump -v -s 128 -n  2 -e '/1 "%x"'  $part)
                      if [ "$sig2" = 00 ];    #### If the first two bytes are zero, the boot sector does not contain any boot loader.
		      then
                      BST="-";
		      else   ###### Otherwise, display the boot sector, so we that we might identify it and add it to the list of known boot sectors.
		      BST="Unknown"
                      echo "Unknown BootLoader  on $name" >> $Unknown_MBR;
                      echo >> $Unknown_MBR;
                      hexdump  -n 512 -C $part >> $Unknown_MBR;
                      echo >> $Unknown_MBR;
                  fi;;
                *) BST="Unknown"
                   echo "Unknown BootLoader  on $name" >> $Unknown_MBR;
                   echo >> $Unknown_MBR;
                   hexdump -n 512 -C $part >> $Unknown_MBR;
                   echo >> $Unknown_MBR;
            esac;
######################   Display the boot sector type.
           echo "    Boot sector type:  "$BST>>"$Log" 

####################### Investigate the Boot Parameter Block of an NTFS partition.

           if [[ "$type" = "ntfs" ]]
           then
           offset=$(hexdump -v -s 28 -n 4 -e '"%u"' $part);
           BPB_Part_Size=$(hexdump -v -s 40 -n 4 -e '"%u"' $part)
           Comp_Size=$(( (BPB_Part_Size - size)/256 ))
           SectorsPerCluster=$(hexdump -v -s 13 -n 1 -e '"%d"' $part);
           MFT_Cluster=$(hexdump -v -s 48 -n 4 -e '"%d"' $part);
           MFT_Sector=$(( MFT_Cluster * SectorsPerCluster ));
         #  Track=$(hexdump -v -s 24 -n 2 -e '"%u"' $part)''  ### Number of sectors per track.
         #  Heads=$(hexdump -v -s 26 -n 2 -e '"%u"' $part)''  ### Number of heads
         #  if [[ "$Heads" != 255  || "$Track" != 63 ]]
	 #  then
         #     BSI=$(echo $BSI" "Geometry: $Heads Heads and $Track sectors per Track.)
	 #  fi;           
           if [[ "$MFT_Sector" -lt "$size" ]];
           then
               MFT_FILE=$(dd if=$part skip=$MFT_Sector count=1 2>>$Trash | hexdump -v    -n 4 -e '"%_u"');               
	   else 
               MFT_FILE="";
           fi;
           MFT_Mirr_Cluster=$(hexdump -v -s 56 -n 4 -e '"%d"' $part);
           MFT_Mirr_Sector=$(( MFT_Mirr_Cluster * SectorsPerCluster ));
           if [[ "$MFT_Mirr_Sector" -lt "$size" ]];
           then
                MFT_Mirr_FILE=$(dd if=$part skip=$MFT_Mirr_Sector count=1 2>>$Trash | hexdump -v    -n 4 -e '"%_u"');
  
           else 
               MFT_Mirr_FILE="";
           fi;
           if [[ "$offset" = "$start"  && "$MFT_FILE" = "FILE"  && "$MFT_Mirr_FILE" = "FILE"  && "$Comp_Size" = "0"  ]];
	    then
	       BSI=$(echo $BSI" "No errors found in the  Boot Parameter Block.);
           else
	    if [[ "$offset" != "$start" ]] 
            then
                BSI=$(echo $BSI"  "According to the info in the boot sector, $name starts at sector $offset.)
                if [[ "$offset" != "63" && "$offset" != "2048"  && "offset" != "0" ||  "$kind" != "L" ]]
                then
                    BSI=$(echo $BSI" "But according to the info  from fdisk, $name starts at sector   $start.);
                 fi;
            fi;
            if  [[ "$MFT_FILE" != "FILE"  ]]; 
	    then 
                BSI=$(echo $BSI" "The info in boot sector  on  the starting sector of the MFT is wrong.);
                echo MFT Sector of $name >> $Unknown_MBR;
                echo >> $Unknown_MBR
                dd if=$part skip=$MFT_Sector count=1 2>>$Trash| hexdump -C >>$Unknown_MBR;
             fi;
             if [[ "$MFT_Mirr_FILE" != "FILE" ]];
	     then
		 BSI=$(echo $BSI" "The info in the boot sector on  the starting sector of the MFT Mirror  is wrong.);
             fi;

             if  [[ "$Comp_Size" != "0"  ]];
             then  
                   BSI=$(echo $BSI"  "According to the info in the boot sector, $name has    $BPB_Part_Size sectors, but according to the info  from fdisk, it has  $size sectors.);
             fi;
           fi;
          fi;

######################## Investigate the Boot Parameter Block (BPB)of some Fat partitions
 #####  Identifies Fat Bootsectors which are used for booting.

##  if [[ "$Bytes8081" = "7cc6" ||  "$Bytes8081" = "7815"  ||  "$Bytes8081" = "B6D1"  || "$Bytes8081" =  "7405" || "$Bytes8081" = "6974" || "$Bytes8081" = "bd0" ||  "$Bytes8081" =  "89e"  ]] ;

        if [[ "$type" = "vfat" ]];
           then
           offset=$(hexdump -v -s 28 -n 4 -e '"%d\n"' $part); #### Starting sector the partition  according to BPP
           BPB_Part_Size=$(hexdump -v -s 32 -n 4 -e '"%d"' $part); ### Partition Size in sectors accoring to BPB 
           Comp_Size=$(( (BPB_Part_Size - size)/256 )) ### This number will be unequal to zero  if the two partions size  differ by more than 255 sectors.  
           #Track=$(hexdump -v -s 24 -n 2 -e '"%u"' $part)''  ### Number of sectors per track.
           #Heads=$(hexdump -v -s 26 -n 2 -e '"%u"' $part)''  ### Number of heads
           #if [[ "$Heads" != 255  || "$Track" != 63 ]] ###  Checks for an usual geometry. 
	   #then
           #   BSI=$(echo $BSI" "Geometry: $Heads Heads and $Track sectors per Track.)  ### Report unusal geometry
	   #fi;     
           if [[ "$offset" = "$start" && "$Comp_Size" = "0"  ]];  ### Check whether Partitons starting sector  and  the Partition Size of BPB and fdisk agree. 
	    then
	       BSI=$(echo $BSI" "No errors found in the  Boot Parameter Block.);  ##If they agreee
	    else      ######   if they  don't agree
            if [[ "$offset" != "$start" ]]   ###  if partition starting sector disagree 
            then
                BSI=$(echo $BSI"  "According to the info in the boot sector, $name starts at sector $offset.)   ### display the starting sector accoding to BPB
                if [[ "$offset" != "63" && "$offset" != "2048" ||  "$kind" != "L" ]]  ### check whether partition is logcial partition and starting sector is a 63.
                then  ### if not, display starting sector according to fdisk.
                    BSI=$(echo $BSI" "But according to the info  from fdisk, $name starts at sector   $start.);
                fi; ### If not, don't display.  (This is quite common occurence, and only matters if one tries to boot Windows from a logical partition. So I decided not to display a warning message in this case. 
            fi;  
#### If Partition sizes from BPB and FDISK differ by more than 255 sector, display both sizes.       
            if [[ "$Comp_Size" != "0"  ]];
            then    
		BSI=$(echo $BSI"  "According to the info in the boot sector, $name has    $BPB_Part_Size sectors.)
                if [[ "$BPB_Part_Size" != 0 ]];
                then 
                BSI=$(echo "$BSI"." " But according to the info  from the partition table , it has  $size sectors.);
                fi;  ## Don't display warning message in the common case BPB_Part_Size=0. 
            fi; 
              
            fi;   #### End of BPB Error if then else 
          fi;   ###### End of Investigation of the BPB of vfat partitions. 
################################################################################################
      #####  Display boot sector info
      echo -n "    Boot sector info:  ">>"$Log"
      echo $BSI | fold -s -w 55 |  sed -e '2~1s/.*/                       &/'>>"$Log"

      ####Exclude Partitions which contain no information,     #########
      ##### or which we (currently) don't know how to  accces. #########  
      if [ "$type" != "swap" ]  && [ "$type" != "Extended Partition"  ] && [ "$type" != "unknown volume type" ] && [ "$type" != "LVM2_member" ]  && [ "$type" != "linux_raid_member" ] && [ "$type" != "crypto_Luks" ] && [ "$system" != "Bios Boot Partition" ] ; 
      then     
 
         CheckMount=$(mount| grep "$part " |sed '2,$ d');
         CheckMount=${CheckMount% type*};
         CheckMount=${CheckMount#* on };   
          ### Check whether partition is already mounted
         if  [ "$CheckMount" != "" ] ;
         then 
             if  [ "$CheckMount" = "/" ];
             then mountname="";
             else
                mountname=$CheckMount;  #### if yes,use existing mount point.
             fi;
         fi;
         if  [ "$CheckMount" != "" ] || mount -r  -t "$type" $part "$mountname" 2>>$Mount_Error  || ( [ "$type" = ntfs ] &&  ntfs-3g -o ro  $part "$mountname" 2>>$Mount_Error )   ;     ####### Try to mount partition
         then     ############  if partition is  mounted.
         #####Try to identify the Operating  System (OS) by  looking for files specific to the OS
       OS=""

        grep -q "W.i.n.d.o.w.s. .V.i.s.t.a"  "$mountname"/{windows,Windows,WINDOWS}/{System32,system32}/{Winload,winload}.exe 2>>$Trash && OS="Windows Vista";

       grep -q "W.i.n.d.o.w.s. .7" "$mountname"/{windows,Windows,WINDOWS}/{System32,system32}/{Winload,winload}.exe 2>>$Trash && OS="Windows 7";
       for  WinOS in  "MS-DOS"  "MS-DOS 6.22" "MS-DOS 6.21" "MS-DOS 6.0" "MS-DOS 5.0" "MS-DOS 4.01" "MS-DOS 3.3" "Windows 98" "Windows 95"; do grep -q "$WinOS" "$mountname"/{IO.SYS,io.sys} 2>>$Trash && OS="$WinOS"; done;
        

       [ -s "$mountname/Windows/System32/config/SecEvent.Evt" ] ||  [ -s "$mountname/WINDOWS/system32/config/SecEvent.Evt" ] || [ -s "$mountname/WINDOWS/system32/config/secevent.evt" ] || [ -s "$mountname/windows/system32/config/secevent.evt" ] && OS="Windows XP";

       [ -s "$mountname/etc/issue" ] && OS=$(sed -e 's/\\. //g' -e 's/\\.//g' -e 's/^[ \t]*//' "$mountname"/etc/issue);

        [ -s "$mountname/etc/slackware-version" ] && OS=$(sed -e 's/\\. //g' -e 's/\\.//g' -e 's/^[ \t]*//' "$mountname"/etc/slackware-version);


####################################  search for  the files in $Bootfiles   ########################
#################################### and if found, display there contained ########################
       BootFiles="" 
       if [ "$type" = "vfat" ];
       then
           Boot_Files=$Boot_Files_Fat;
       else
           Boot_Files=$Boot_Files_Normal;  
       fi;
       
       for file in $Boot_Files;
       do
           if [ -f "$mountname"$file ] && [ -s "$mountname"$file ] && FileNotMounted "$mountname"$file "$mountname"
           then
               BootFiles=$(echo $BootFiles"  "$file);
              if ! [ -h "$mountname"$file ];  ### check whether file is  symlink
              then                            ### if not a symlink, display content.
                 titlebar_gen "$name" $file; ##generates a titlebar above each file/dir listed      
                 cat "$mountname"$file  >> "$Log1"; 
              fi;
	   fi;
       done;
################# Search for Wubi partitions  ###################################
if [ -f "$mountname""/ubuntu/disks/root.disk" ];
      then          
          Wubi=$(losetup -a|awk '$3 ~ "(/host/ubuntu/disks/root.disk)"{print $1; exit}'|sed s/.$//)
                    #check whether Wubi already has a loop device.
          if [[ "$Wubi" = "" ]];
          then
              Wubi=$(losetup -f --show  "$mountname""/ubuntu/disks/root.disk" );
              WubiDev=0;
          else
              WubiDev=1;
          fi;
          if [ "$Wubi" != "" ];
          then
              Get_Partition_Info "$Log"x "$Log1"x "$Wubi" "$name""/Wubi" "Wubi/""$mountname" "Wubi" 0 0 "Wubi" "";
          [[ $WubiDev = 0 ]] && losetup -d "$Wubi";  #delete Wubu loop device, if created by BIS
          else 
             echo "Found Wubi on $name. But could not create a loop device">>$Error_Log;
          fi;      
        fi;            
                    
                      
             
#################################### Search for the programs in $Boot_Prog, ###############
################################### if found displays their names.           ###############
        if [ "$type" = "vfat" ];
       then
           Boot_Prog=$Boot_Prog_Fat;
       else
           Boot_Prog=$Boot_Prog_Normal;  
       fi;

       for file in $Boot_Prog;   
       do
           if [ -f "$mountname"$file ] && [ -s "$mountname"$file ]  && FileNotMounted "$mountname"$file "$mountname";
              then 
              BootFiles=$(echo $BootFiles"  "$file);          
	   fi;
       done;


################### Search for the directories related to Booting ########################
##################, if found display the list of files             #######################

#       for file in $Boot_Dir;  #directories in that directory.
#       do
#          if [ -d "$mountname"$file ];
#          then
#	      BootFiles=$(echo $BootFiles"  "$file); 
#              titlebar_gen "$name" $file	##generates a titlebar above each file/dir listed
#              ls -la  "$mountname"$file >> "$Log1" ; 
#             
#	  fi;
#       done;

####################  Search for files containing boot codes #################################

       for file in $Boot_Codes_Dir    #####  loop through all directories which might contain boot_code files
       do
	   if [ -d "$mountname"$file ] && FileNotMounted "$mountname"$file "$mountname";   ##### if such directory exist
	   then  
	       for loader in $( ls  "$mountname"$file );  ##### look at the content of that directory 
	       do
                  if [ -f "$mountname$file$loader" ] && [ -s "$mountname$file$loader" ];  ####  it its a file
		  then		     
                      sig=$(hexdump -v -s 257 -n 8  -e '8/1 "%_p"' "$mountname"$file$loader);
                      if [ "$sig"  = "BootPart" ]    ##### Bootpart code has "BootPart" written at0x101
		      then
                          offset=$(hexdump -v -s 241 -n 4 -e '"%d"' "$mountname"$file$loader);
                              dr=$(hexdump -v -s 111 -n 1 -e '"%d"' "$mountname"$file$loader);
			      dr=$((dr -127))
 			  BFI=$(echo $BFI "  "BootPart in the file $file$loader is trying to chain load sector \#$offset on boot drive \#$dr);
		      fi;
		      sig=$(hexdump -v -s 383 -n 4  -e '4/1 "%_p"' "$mountname"$file$loader);
                      if [ "$sig"  = "GRUB" ];   ##### Grub and Grub1.96  have "Grub" written at 0x17f
                      then
                          sig2=$(hexdump -v -n  2 -e '/1 "%x"' "$mountname"$file$loader);
                          if [[ "$sig2" = "eb48" ]] ### distinguish Grub and Grub 2 by the
                                                    ##### first two bytes.
                          then
                               stage2_loc  "$mountname"$file$loader;
                               BFI=$(echo $BFI" "Grub $Grub_Version in the file  $file$loader $Stage2_Msg);
                          else 
                               core_loc  "$mountname"$file$loader 1.96;
                               BFI=$(echo $BFI" "Grub 1.96  in the file  $file$loader $Core_Msg); 
                          fi;    
                      fi;
                      sig=$(hexdump -v -s 392 -n 4  -e '4/1 "%_p"' "$mountname"$file$loader);#### Grub1.97 has "Grub" writtem at 0x188
                      if [ "$sig"  = "GRUB" ];   ##### Grub 2  have "Grub" written at 0x188
                      then  
                          core_loc  "$mountname"$file$loader 1.97;
                          BFI=$(echo $BFI" "Grub 2  in the file  $file$loader $Core_Msg); 
                      fi;
                      
 		  fi;
	        done; ## End of loop through the files in a particular  Boot_Code_Directory
            fi;
        done   ## End of the loop through the Boot_Code_Directories.

######### Determine the end point of all files in the GrubError18_Files list
    
     echo >$Tmp_Log;
     counter=0;
     cd "$mountname"/;
     for file in $(ls $GrubError18_Files 2>>$Trash);
     do
     if [[ -f $file ]] && [[ -s $file ]] && FileNotMounted "$mountname""/"$file "$mountname"
     then
         EndGB="??";
         BlockSize=$(filefrag -v $file| grep "Blocksize" |awk '{print $6}');
         if [ "$BlockSize" != "" ];
         then
             LastBlock=$(filefrag -v "$file"| grep "Last block"  |awk '{print $3}');
             if [ "$LastBlock" != "" ];
             then
 	              EndGB=$(echo $(((BlockSize*LastBlock + 512*start)/100000000 ))|sed 's/\(.\)$/\.\1/')
	     fi;  
         fi; 
         BlockSize=$(filefrag -v "$file"| grep "blocksize" |awk '{print $NF}'| sed 's/)//');
         if [ "$BlockSize" != "" ];
         then
             LastBlock=$(filefrag -v "$file" | grep 'eof'  |awk '{print $3}');
             if [ "$LastBlock" != "" ];
             then
 	        EndGB=$(echo $(((BlockSize*LastBlock + 512*start)/100000000 ))|sed 's/\(.\)$/\.\1/')
	     fi;  
         fi; 
         printf "%6sGB: %-s\n" $EndGB "$file" >>$Tmp_Log;
         ((counter++));
     fi;
     done;
     cd $Folder;
     if [ $counter != 0 ];
     then
	  titlebar_gen "$name"  ": Location of files loaded by Grub";
          cat $Tmp_Log>>"$Log1";
     fi;
     echo >$Tmp_Log;

      if [[ $BFI != "" ]];
      then
          echo -n "    Boot file info:     ">>"$Log"
          echo $BFI | fold -s -w 55 |  sed -e '2~1s/.*/                       &/'>>"$Log"
      fi;
      echo "    Operating System:  "$OS | fold -s -w 55 | sed -e '2~1s/.*/                       &/'>>"$Log"    
      echo -n "    Boot files/dirs:   ">>"$Log"
      echo $BootFiles | fold -s -w 55 |  sed -e '2~1s/.*/                       &/'>>"$Log"
     
        if [ "$CheckMount" = "" ];  ## if partition was mounted by the script
        then
            umount "$mountname" || umount -l "$mountname";          
        fi;
     else     ############### if partition failed to mount  
       echo "    Mounting failed:">>"$Log";  
       cat $Mount_Error>>"$Log"; 
     fi;  ### end of Mounting "if then else"
     fi;  ### end of Partition Type "if then else"
     echo>>"$Log";
     if [[ -e "$Log"x ]];
     then cat "$Log"x>>"$Log";
          rm "$Log"x;
     fi;
     if [[ -e "$Log1"x ]];
     then cat "$Log1"x>>"$Log1";
          rm "$Log1"x;
     fi;

      }  ## end Get_Partition_Info function



## "titlebar_gen" generates the $name$file title bar to always be either 79 or 80 chars total in length:
titlebar_gen () {
		name_file="$1$2:"; name_file_length=${#name_file}
		equal_signs_line_length=$(((80-name_file_length)/2-1)); equal_signs_line=""
		for length in $(seq $equal_signs_line_length); do
  			equal_signs_line='='$equal_signs_line
		done;
                echo >> "$Log1";
		echo "$equal_signs_line $name_file $equal_signs_line" >> "$Log1";
                echo >> "$Log1";
                }


echo "                Boot Info Script $VERSION    dated $DATE                    ">>"Log";
echo>>"Log";
echo '============================= Boot Info Summary: =============================='>>"$Log"; 
echo>>"$Log";

#####   Search  for  hard drives which don't exist,have a  corrupted partition table
#####  or  don't have a parition table(whole drive is a file system) 
#####  Information on all  hard drives which a valid partition table are stored in the 
#####  Hard drives arrays: HD?????
FSD=0;  #id for Filesystem Drives
for drive in  $All_Hard_Drives;
do
     size=$(fdisks $drive);
     PrintBlkid $drive;        
     if [ 0 -lt $size 2>>$Trash ];
     then
          if  [ "$(blkid  $drive)" = "" ] || [ "$(blkid  | grep $drive:)" = "" ]; #Check whether drive is a filesystem
          then  #if drive is  not a filesytem
             size=$((2*size));
 # (not used) Hard_Drives=$Hard_Drives" "$drive;
            HDName[$HI]=$drive;
            HDSize[$HI]=$size;
            geometry=$(fdisk  -lu $drive 2>>$Trash | grep "head");
            HDHead[$HI]=$(echo $geometry | awk '{print $1}');
            HDTrack[$HI]=$(echo $geometry | awk '{print $3}');
            HDCylinder[$HI]=$(echo $geometry | awk '{print $5}');
 ###Look at the first 4 bytes of the second sector to identify type of partition table;
            case $(hexdump -v -s 512 -n 4 -e '"%_u"' $drive) in
            "EMBR")  HDPT[$HI]="BootIt";;
            "EFI ")  HDPT[$HI]="EFI";;
                 *)  HDPT[$HI]="MSDos";;
            esac; 
            HI=$((HI+1));
          else   #if drive is  filesystem
              if [ $( expr match "$(BlkidTag "$drive" TYPE)" '.*raid') -eq 0 ] || [ "$(BlkidTag "$drive" UUID)" != "" ];
              then
                   FilesystemDrives[$FSD]="$drive";
                   ((FSD++));
              fi;
          fi;
      else
            echo -n "$(basename $drive) " >>$FakeHardDrives;
      fi;
done;
############ Identify the MBR of each  hard drive.
echo "Identifying MBRs..." ;
for hi in ${!HDName[@]};
  do 
    drive="${HDName[$hi]}";
    Message=$(echo is installed in the MBR of $drive)
    case $(hexdump -v -n  2 -e '/1 "%x"' $drive) in   ####Look at the first two bytes of the hard drive  to identify the boot code installed in the MBR
 
################################ If Grub is in the MBR   #########################

	eb48) offset=$(hexdump -v -s 68 -n 4 -e '"%u"' $drive);### 0x44 contains the offset of the next stage
              if  [ "$offset" != 1 ];   ###if  Grub is installed without stage1.5 files 
	      then
                  stage2_loc $drive;
                  Message=$(echo $Message and  $Stage2_Msg)
 	      else                         ### if grub is installed with stage1.5 files
                  Grub_String=$(hexdump -v -s 1042 -n 94 -e '"%_u"' $drive);
                  Grub_Version=${Grub_String%%nul*};
                  tmp='/'${Grub_String#*/};
                  tmp=${tmp%%nul*};
                  stage=$(echo $tmp| awk '{print $1}');
                  menu=$(echo $tmp| awk '{print $2}');
                  [[ "$menu" = "" ]] || stage=$(echo $stage and $menu);
                  part_info=$((1045 + ${#Grub_Version}));
	          pa=$(hexdump -v -s $part_info  -n 1 -e '"%d"' $drive);
                  part_info=$((part_info+1));
                  dr=$(hexdump -v -s $part_info -n 1 -e '"%d"' $drive);
                  dr=$((dr-127));
		  pa=$((pa+1));
		  if [ $dr = 128 ];
                  then
                       Message=$(echo $Message and looks on the same drive in partition \#$pa for $stage.)
                  else
                      Message=$(echo $Message and looks  on boot drive \#$dr in partition \#$pa for $stage.)
              fi;
	    fi;
              BL="Grub "$Grub_Version;;
###############################  If Grub 1.96 is in the MBR   #####################################

        eb4c ) BL="Grub 1.96";
              offset=$(hexdump -v -s 68 -n 4 -e '"%u"' $drive);### 0x44 contains the offset of the next stage
              if  [ "$offset" != 1 ];   ###if  Grub2 is  installed without  Core. 
	      then
                  core_loc $drive 1.96;
                  Message=$(echo $Message and  $Core_Msg)
 	      else                      ### if Grub2  is installed with Core
                  Grub_String=$(hexdump -v -s 1056 -n 64 -e '"%_u"' $drive);
                  Core_Dir=$(echo  $Grub_String | sed s/nul[^$]*//);
	          pa=$(hexdump -v -s 1044  -n 1 -e '"%d"' $drive);
                  dr=$(hexdump -v -s 77  -n 1 -e '"%d"' $drive);
                  dr=$((dr-127));
		  pa=$((pa+1));
		  if [ $dr = 128 ];
                  then
                       Message=$(echo $Message and looks on the same drive in partition \#$pa for $Core_Dir.)
                  else
                      Message=$(echo $Message and looks  on boot drive \#$dr in partition \#$pa for $Core_Dir.)
              fi;
	    fi;;

################### If  Grub 2 in the MBR###################################
        eb63 ) BL="Grub 2"
             offset=$(hexdump -v -s 92 -n 4 -e '"%u"' $drive);### 0x5c contains the offset of the core 
             if  [ "$offset" != 1 ];   ###if  Grub2 is  installed without embeded  Core. 
	     then
                 core_loc $drive 1.97;
                  Message=$(echo $Message and  $Core_Msg)
 	     else                      ### if Grub2  is installed with Core
                  Grub_String=$(hexdump -v -s 1052 -n 64 -e '"%_u"' $drive);
                  Core_Dir=$(echo  $Grub_String | sed s/nul[^$]*//);
	          pa=$(hexdump -v -s 1044  -n 1 -e '"%d"' $drive);
                  dr=$(hexdump -v -s 77  -n 1 -e '"%d"' $drive);
                  dr=$((dr-127));
		  pa=$((pa+1));
		  if [ $pa = 255 ];
                  then
                      Message=$(echo $Message and looks  for $Core_Dir.)
                  else
                       Message=$(echo $Message and looks on the same drive in partition \#$pa for $Core_Dir.)
                  
                  fi;
	    fi;;
##############################################################################################
	 ebe) BL=ThinkPad;;
	31c0) BL="Acer 3";;
	33c0) BL=Windows;;
	33ff) BL='HP/Gateway';;
	b800) BL=PloP;;
	ea1e) BL="Truecrypt Boot Loader";; 
	eb04) BL=Solaris;;
	eb31) BL=Paragon;;
        eb5e) case $(hexdump -v -n  3 -e '/1 "%x"' $drive) in   ####Look at the first three bytes of the hard drive to identify the boot code installed in the MBR
		eb5e00) BL=fbinst;;
		eb5e80) BL=Grub4Dos;;
	      esac;;
	fa31) case $(hexdump -v -n  3 -e '/1 "%x"' $drive) in   ####Look at the first tree bytes of the hard drive to identify the boot code installed in the MBR
		fa31c0) BL=Syslinux;;
		fa31c9) BL="Master Boot LoaDeR";;   
	      esac;;

	fa33) BL="No boot loader";; 
	fab8) BL="No boot loader";;   
	fabe) BL="No boot loader?";;
	faeb) BL=Lilo;; 
	fc31) BL=Testdisk;;
	fc33) BL=GAG;;
	fceb) BL="BootIt NG";;
          00) BL="No boot loader";;
	   *) BL="No known boot loader"
              echo "Unknown MBR on $drive" >> $Unknown_MBR;
              echo >> $Unknown_MBR;
              hexdump -v -n 512 -C $drive >> $Unknown_MBR;
              echo >> $Unknown_MBR;;
        esac;
        ##Output message at beginning of summary that gives MBR info for each drive:
        echo -n " => ">>"$Log"
        echo "$BL $Message" | fold -s -w 75 | sed -e '2~1s/.*/    &/' >>"$Log"  
        HDMBR[$hi]=$BL;
    done;
    echo>>"$Log";
######################################################################################
#############   Store and Display all the partitions tables.##########################
for HI in ${!HDName[@]};
    do
    drive=${HDName[$HI]};
    echo "Computing Partition Table of $drive...";
    FP=$((PI+1)); #used if non-MS_DOS partition table is not in use.
    FirstPartition[$HI]=$FP;
    PTType=${HDPT[$HI]};
    HDPT[$HI]="MSDos";
    echo "Drive: $(basename $drive ) ___________________ _____________________________________________________" >>$PartitionTable;
    fdisk  -lu $drive 2>>$Trash |sed '/omitting/ d'|sed '6,$ d' >>$PartitionTable;
    echo >>$PartitionTable;
    printf "$PTFormat" "Partition" "Boot" "Start" "End"  "Size"  "Id" "System">>$PartitionTable;
    echo >>$PartitionTable;
    ReadPT $HI 0  4 $PartitionTable "$PTFormat" "" 0;
    echo >>$PartitionTable;
    LastPartition[$HI]=$PI;
    LP=$PI;
    CheckPT  ${FirstPartition[$HI]} ${LastPartition[$HI]}  $PartitionTable $HI;
    echo >>$PartitionTable;
    HDPT[$HI]=$PTType;
    case $PTType in
      BootIt)  echo -n  BootIt NG Partition Table detected>>$PartitionTable;
              [[ "${HDMBR[$HI]}" = "BootIt NG" ]] && echo . >>$PartitionTable || echo , but does not seem to be used. >>$PartitionTable;
              echo>>$PartitionTable;
              ReadEMBR  $HI $PartitionTable;
	      echo >>$PartitionTable;
              if [ "${HDMBR[$HI]}" = "BootIt NG" ];
	      then
                   LastPartition[$HI]=$PI;
                   CheckPT  ${FirstPartition[$HI]} ${LastPartition[$HI]}  $PartitionTable $HI; 
	      else
                   FirstPartition[$HI]=$FP;
              fi;;
         EFI) FirstPartition[$HI]=$((PI+1));
              EFIee=$(hexdump -v -s 450 -n 1 -e '"%x"' $drive);
              echo -n  GUID Partition Table detected>>$PartitionTable;
              [[ "$EFIee" = "ee" ]] && echo . >>$PartitionTable || echo , but does not seem to be used. >>$PartitionTable ;
              echo >>$PartitionTable;
              ReadEFI  $HI $PartitionTable;
              echo >>$PartitionTable;
              if [ "$EFIee" = "ee" ];
	      then
                   LastPartition[$HI]=$PI;
                   CheckPT  ${FirstPartition[$HI]} ${LastPartition[$HI]}  $PartitionTable $HI;
	      else
                   FirstPartition[$HI]=$FP;
              fi;;
      esac;    
done;

for hi in ${!HDName[@]};  ############Loop through all Hard Drives
 do
 drive=${HDName[$hi]}
for (( pi = FirstPartition[$hi]; pi <= LastPartition[$hi]; pi++ ));  ## And then loop through                                                                      ###the partitions  on that drive
do
         
      part_type=${TypeArray[$pi]};  #### Type of the partition according to fdisk
      start=${StartArray[$pi]};
      size=${SizeArray[$pi]};
      end=${EndArray[$pi]};
      kind=${KindArray[$pi]};
      system=${SystemArray[$pi]};
      if [[ "${DeviceArray[$pi]}" = "" ]];
      then
          name="${NamesArray[$pi]}";
          mountname=$(basename $drive)"_"$pi;
          part=$(losetup -f --show  -o $((start*512)) $drive);
         #### --sizelimit $((size*512))    --sizelimit seems to be a recently added option for losetup.  Failed on Hardy 
      else
          part="${DeviceArray[$pi]}";
          name=$(basename $part);  ####  Name of the partition (/dev/sda8 -> sda8)
          mountname=$name;      
      fi;

      Get_Partition_Info "$Log" "$Log1" "$part" "$name" "$mountname" "$kind" "$start" "$end" "$system" "$pi";
     
     [[ "${DeviceArray[$pi]}" = ""  ]] && losetup -d $part;
     done;  ### end of partition loop
     done;  ### end of hard drive loop


################ Deactivate dmraid's activated by the script#############

if [ "$InActiveDMRaid" != "" ];
then
   dmraid -an $InActiveDMRaid
fi; 

##################### Search LVM partitions for information.             #########
##################### only works if the "LVM2"-package is installed     #########
if type lvscan >>$Trash 2>>$Trash && type lvdisplay >>$Trash 2>>$Trash && type lvchange >>$Trash 2>>$Trash;

then   ###  if LVM2 is installed
   
   LVM_Partitions=$(lvscan| awk '{print $2}'| awk -F / '{print "/dev/mapper" "/" $3 "-" $4}'|sed s/.$//)

   for LVM in $LVM_Partitions;
   do 
      LVM_Size=$(lvdisplay -c $LVM  |awk -F : '{print $7}');
      LVM_Status=$(lvdisplay $LVM |grep "LV Status"|awk '{print $3}');
      lvchange -ay $LVM;
      name=${LVM:12};
      mountname="LVM/""$name";
      kind="LVM";
      start=0;
      end=$LVM_Size;
      system="";
      pi="";
     
      Get_Partition_Info "$Log" "$Log1" "$LVM" "$name" "$mountname" "$kind" "$start" "$end" "$system" "$pi";
      
  [[ "$LVM_Status" = "NOT" ]] && lvchange -an "$LVM";
                         #deactivate all LVM's,which were not active. 
  
     
    done;
fi;


####################### Search MDRaid Partitons for Information##############################
######################  Only works if "mdadm" is installed     #############################
if type mdadm >>$Trash 2>>$Trash;
then
    MD_Active_Array=$(mdadm --detail --scan |awk '{print $2}');
                   ## all arrays which are already assembled
    mdadm --assemble  --scan  #assemble all arrays
    MD_Array=$(mdadm --detail --scan|awk '{print $2}');
                    ## all arrays.
    for MD in $MD_Array;
    do
        MD_Size=$(fdisks $MD); #size in blocks
        MD_Size=$((2*MD_Size)); #size in sectors
        MD_Active=0;
        for MDA in $MD_Active_Array;  ## check whether MD is active
        do
          if [[ "$MDA" = "$MD" ]]
          then
              MD_Active=1;
              break;
          fi;
	done;
      name=${MD:5};
      mountname="MDRaid/""$name";
      kind="MDRaid";
      start=0;
      end=$MD_Size;
      system="";
      pi="";
     
      Get_Partition_Info "$Log" "$Log1" "$MD" "$name" "$mountname" "$kind" "$start" "$end" "$system" "$pi";
      
  [[ "$MD_Active" = 0 ]] && mdadm --stop $MD

                         #deactivate all MD_Raid's,which were not active.
   done;
fi; 

####################### Search Filessystem hard drive for information########################

    for FD  in ${FilesystemDrives[@]};
    do
      FD_Size=$(fdisks $FD); #size in blocks
      FD_Size=$((2*FD_Size)); #size in sectors
      name=${FD:5};
      mountname="FD/""$name";
      kind="FD";
      start=0;
      end=$FD_Size;
      system="";
      pi="";
     
      Get_Partition_Info "$Log" "$Log1" "$FD" "$name" "$mountname" "$kind" "$start" "$end" "$system" "$pi";
    done;
  

###############################################################################################

echo '=========================== Drive/Partition Info: ============================='>>"$Log";
echo>>"$Log";
 
[ -e $PartitionTable ] && cat $PartitionTable>>"$Log" || echo no valid partition table found>>"$Log";


echo "blkid -c /dev/null: ____________________________________________________________">>"$Log";
echo>>"$Log";
printf "$BlkidFormat" Device  UUID TYPE LABEL>>"$Log";
echo>>"$Log"
for dev in $(blkid -o device);do PrintBlkid $dev;done;
sort -u $BLKID>>"$Log";
echo>>"$Log";

if [ $(ls -R /dev/mapper 2>>$Trash | wc -l) -gt 2 ]
then

  echo '=============================== "ls -R /dev/mapper/" output: ==============================='>>"$Log";
   ls -R /dev/mapper>>$Log
  echo>>"$Log";
fi;
         




echo '============================ "mount | grep ^/dev  output: ==========================='>>"$Log";
MountFormat='%-16s %-24s %-10s %s\n';
Fis=':x:x:x:x:'
echo>>"$Log";
printf "$MountFormat" "Device" "Mount_Point"  "Type"  "Options" >>"$Log";
echo>>"$Log";
mount | grep ' / '| grep -v '^/'| sed  's/ on /'$Fis'/' |sed 's/ type /'$Fis'/'|sed  's/ (/'$Fis'(/'|awk -F $Fis '{printf "'"$MountFormat"'", $1, $2, $3, $4 }'>>"$Log";
mount | grep '^/dev'|sed  's/ on /'$Fis'/' |sed 's/ type /'$Fis'/' |sed  's/ (/'$Fis'(/'|awk -F $Fis '{printf "'"$MountFormat"'", $1, $2, $3, $4 }'>>"$Log";
echo>>"$Log";


#################   Write the content of Log1 to the log file
[ -e "$Log1" ] && cat "$Log1">>"$Log"; 

if [ -e $Unknown_MBR ]; 
then
 echo "=========================== Unknown MBRs/Boot Sectors/etc =======================">>"$Log";
 echo>>"$Log";
 cat $Unknown_MBR>>"$Log";
 echo>>"$Log";
fi;

if [ -e $FakeHardDrives ];
then 
 echo "=======Devices which don't seem to have a corresponding hard drive==============">>"$Log";
 echo>>"$Log";
 cat $FakeHardDrives>>"$Log";
 echo>>"$Log";
fi;
  

#####################  Write the Error Log to the log file
if [ -s $Error_Log ];
then
    echo "=============================== StdErr Messages: ===============================">>"$Log";
    echo>>"$Log";
    cat $Error_Log>>"$Log";
fi;

#####   Copy the  Log file to RESULTS file and make the  user the owner of Result file
cp "$Log" "$LogFile"
chown $(basename ~) "$LogFile";   

#######  Reset the Standard Output to the Terminal 
#exec 1>&-;
#exec 1>&6;
#exec 6>&-;

echo Finished. The results are in the file $(basename "$LogFile") located in "$Dir";
exit

phplus · « **Odpověď #6 kdy:** 17 Září 2010, 09:05:56 »

Obávám se, že z toho nic nepoznáš, systém bootuje teď ze sabayonu.

jmp · « **Odpověď #7 kdy:** 17 Září 2010, 12:59:31 »

Citace: phplus 17 Září 2010, 09:05:56

Obávám se, že z toho nic nepoznáš, systém bootuje teď ze sabayonu.

ja se obavam, ze jste sem dal obsah samotneho skriptu a nikoliv jeho vystup...

phplus · « **Odpověď #8 kdy:** 17 Září 2010, 13:06:31 »

To je asi pravda ale nevím, jak ho spustit.

jmp · « **Odpověď #9 kdy:** 17 Září 2010, 13:10:15 »

snad nejak takto?

to use this script:

Kód: [Vybrat]

sudo bash boot_info_script055.shor

Kód: [Vybrat]

su -
bash boot_info_script055.sh

phplus · « **Odpověď #10 kdy:** 17 Září 2010, 14:18:31 »

Kód: [Vybrat]

     [           Boot Info Script 0.55    dated February 15th, 2010                    

============================= Boot Info Summary: ==============================

 => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in 
    partition #9 for /boot/grub.

sda1: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sda2: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub
    Boot sector info:  Grub 0.97 is installed in the boot sector of sda2 and 
                       looks at sector 17135670 of the same hard drive for 
                       the stage2 file. A stage2 file is at this location on 
                       /dev/sda. Stage2 looks on partition #2 for 
                       /boot/grub/menu.lst.
    Operating System:  Welcome to openSUSE 11.3 "Teal" 
                       - Kernel ().
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sda3: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sda4: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sda5: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  PCLinuxOS release 2010 
                       (PCLinuxOS) for i586 Kernel 2.6.32.11-pclos2.bfs on a 
                       Dual-processor i686 /
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sda6: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Mandriva Linux release 2010.1 
                       (Official) for i586 Kernel 2.6.33.5-server-2mnb on a 
                       Dual-processor i686 /
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sda7: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sda8: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sda9: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:   This is .()
    Boot files/dirs:   /boot/grub/menu.lst /boot/grub/grub.cfg 
                       /boot/grub/grub.conf /etc/fstab /boot/grub/core.img

sda10: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sda11: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sda12: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu maverick (development 
                       branch)
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disk /dev/sda: 750,2 GB, 750 156 374 016 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 91 201, celkem 1 465 149 168 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů

Partition  Boot         Start           End          Size  Id System

/dev/sda1                  63     4,209,029     4,208,967  82 Linux swap / Solaris
/dev/sda2    *      4,209,030    46,154,744    41,945,715  83 Linux
/dev/sda3          46,154,745   381,736,529   335,581,785  83 Linux
/dev/sda4         381,736,591 1,465,144,064 1,083,407,474   5 Extended
/dev/sda5         381,736,593   406,926,449    25,189,857  83 Linux
/dev/sda6         974,101,338 1,165,081,994   190,980,657  83 Linux
/dev/sda7       1,456,950,978 1,465,144,064     8,193,087  82 Linux swap / Solaris
/dev/sda8         711,438,588   725,463,269    14,024,682  82 Linux swap / Solaris
/dev/sda9         725,463,333   974,101,274   248,637,942  83 Linux
/dev/sda10        406,926,513   415,103,534     8,177,022  82 Linux swap / Solaris
/dev/sda11        415,103,598   711,438,524   296,334,927  83 Linux
/dev/sda12      1,165,082,058 1,456,950,914   291,868,857  83 Linux


blkid -c /dev/null: ____________________________________________________________

Device           UUID                                   TYPE       LABEL                         

/dev/sda: PTTYPE="dos" 
/dev/sda10       6f009fc7-9fec-4f42-97e5-18c636936cc6   swap                                     
/dev/sda1        1cae7353-0a43-451b-9d30-f003aa8eaf5a   swap                                     
/dev/sda11       e533431e-2251-4f50-ac65-1f7d7edfb0bf   ext4                                     
/dev/sda12       9029630d-4acb-48b4-bfd1-8ca6f16e6230   ext4                                     
/dev/sda2        3ef47c3f-6c83-4631-a6ce-5001b0b045fc   ext4                                     
/dev/sda3        0d6c487f-e629-4527-9939-fc090c67cc01   ext4                                     
/dev/sda4: PTTYPE="dos" 
/dev/sda5        620603ca-f4c6-4bc8-bd11-aacc0c2a038a   ext4                                     
/dev/sda6        05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa   ext4                                     
/dev/sda7        b66608eb-f783-49db-afec-e8ed476f5f2c   swap                                     
/dev/sda8        119d4d37-c80b-4e32-baa7-73ed6c1dbb9c   swap                                     
/dev/sda9        031025e1-05ba-4fa9-baf9-0fc077fa5d15   ext4                                     
error: /dev/sdb: No medium found
error: /dev/sdc: No medium found
error: /dev/sdd: No medium found
error: /dev/sde: No medium found

============================ "mount | grep ^/dev  output: ===========================

Device           Mount_Point              Type       Options

/dev/sda12       /                        ext4       (rw,errors=remount-ro,commit=0)


=========================== sda2/boot/grub/menu.lst: ===========================

# Modified by YaST2. Last modification on St zář  1 23:42:28 CEST 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader

default 0
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,1)/boot/message
##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.3 - 2.6.34-12
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.34-12-desktop root=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part2 resume=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part8 splash=silent quiet showopts vga=0x31a
    initrd /boot/initrd-2.6.34-12-desktop

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.3 - 2.6.34-12
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.34-12-desktop root=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part2 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a
    initrd /boot/initrd-2.6.34-12-desktop

###Don't change this comment - YaST2 identifier: Original name:  linux (/dev/sda5)###
title linux (/dev/sda5)
    root (hd0,4)
    configfile /boot/grub/menu.lst

###Don't change this comment - YaST2 identifier: Original name:  linux (/dev/sda6)###
title linux (/dev/sda6)
    root (hd0,5)
    configfile /boot/grub/menu.lst

###Don't change this comment - YaST2 identifier: Original name:  =Sabayon Linux (kernel-genkernel-x86-2.6.34-sabayon) (/dev/sda9)###
title =Sabayon Linux (kernel-genkernel-x86-2.6.34-sabayon) (/dev/sda9)
    root (hd0,8)
    configfile /boot/grub/menu.lst

=============================== sda2/etc/fstab: ===============================

/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part1 swap                 swap       defaults              0 0
/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part7 swap                 swap       defaults              0 0
/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part8 swap                 swap       defaults              0 0
/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part10 swap                 swap       defaults              0 0
/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part2 /                    ext4       acl,user_xattr        1 1
/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part3 /home                ext4       defaults              1 2
proc                 /proc                proc       defaults              0 0
sysfs                /sys                 sysfs      noauto                0 0
debugfs              /sys/kernel/debug    debugfs    noauto                0 0
usbfs                /proc/bus/usb        usbfs      noauto                0 0
devpts               /dev/pts             devpts     mode=0620,gid=5       0 0

=================== sda2: Location of files loaded by Grub: ===================


   9.0GB: boot/grub/menu.lst
   8.7GB: boot/grub/stage2
   2.3GB: boot/initrd
   2.3GB: boot/initrd-2.6.34-12-desktop
   9.0GB: boot/vmlinuz
   9.0GB: boot/vmlinuz-2.6.34-12-desktop

=========================== sda5/boot/grub/menu.lst: ===========================

timeout 10
color black/cyan yellow/cyan
gfxmenu (hd0,4)/boot/gfxmenu
default 0

title linux
kernel (hd0,4)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c splash=silent vga=788
initrd (hd0,4)/boot/initrd.img

title linux-nonfb
kernel (hd0,4)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c
initrd (hd0,4)/boot/initrd.img

title failsafe
kernel (hd0,4)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a failsafe
initrd (hd0,4)/boot/initrd.img

title openSUSE 11.2 (x86_64)
root (hd0,1)
configfile /boot/grub/menu.lst

title openSUSE 11.2 (x86_64)
root (hd0,1)
chainloader +1

title		Ubuntu lucid (development branch) (10.04) (on /dev/sda6)
root		(hd0,5)
kernel		/boot/vmlinuz-2.6.32-19-generic-pae root=/dev/sda6 
initrd		/boot/initrd.img-2.6.32-19-generic-pae
savedefault
boot


title		Gentoo Base System release 2.0.1 (on /dev/sda9)
root		(hd0,8)
kernel		/boot/kernel-genkernel-x86-2.6.33-sabayon BOOT_IMAGE=/boot/kernel-genkernel-x86-2.6.33-sabayon ro root=/dev/ram0 ramdisk=8192 real_root=/dev/sda9 dolvm init=/linuxrc splash=silent,theme:sabayon console=tty1 quiet resume=swap:/dev/sda7 real_resume=/dev/sda7 
initrd		/boot/initramfs-genkernel-x86-2.6.33-sabayon
savedefault
boot


=============================== sda5/etc/fstab: ===============================

# Entry for /dev/sda5 :
UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a / ext4 defaults 1 1
# Entry for /dev/sda11 :
UUID=e533431e-2251-4f50-ac65-1f7d7edfb0bf /home ext4 defaults 1 2
none /proc proc defaults 0 0
# Entry for /dev/sda1 :
UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a swap swap defaults 0 0
# Entry for /dev/sda7 :
UUID=b66608eb-f783-49db-afec-e8ed476f5f2c swap swap defaults 0 0
# Entry for /dev/sda8 :
UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c swap swap defaults 0 0
# Entry for /dev/sda10 :
UUID=6f009fc7-9fec-4f42-97e5-18c636936cc6 swap swap defaults 0 0
none /dev/pts devpts defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0

=================== sda5: Location of files loaded by Grub: ===================


 197.7GB: boot/grub/menu.lst
 198.0GB: boot/grub/stage2
 195.7GB: boot/initrd.img
 195.7GB: boot/initrd.img.old
 195.7GB: boot/initrd-2.6.32.11-pclos2.bfs.img
 197.7GB: boot/vmlinuz
 197.7GB: boot/vmlinuz-2.6.32.11-pclos2.bfs

=========================== sda6/boot/grub/menu.lst: ===========================

timeout 10
color black/cyan yellow/cyan
gfxmenu (hd0,5)/boot/gfxmenu
default 0

title linux
kernel (hd0,5)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa  resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c splash=silent vga=788
initrd (hd0,5)/boot/initrd.img

title linux-nonfb
kernel (hd0,5)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa  resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c
initrd (hd0,5)/boot/initrd.img

title failsafe
kernel (hd0,5)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa  failsafe
initrd (hd0,5)/boot/initrd.img

title openSUSE 11.3 (i586)
VERSION = 11.3
root (hd0,1)
configfile /boot/grub/menu.lst

title PCLinuxOS (PCLinuxOS)
root (hd0,4)
configfile /boot/grub/menu.lst

=============================== sda6/etc/fstab: ===============================

# Entry for /dev/sda6 :
UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa / ext4 acl,relatime 1 1
/dev/cdrom /media/cdrom auto umask=0,users,iocharset=utf8,noauto,ro,exec 0 0
none /proc proc defaults 0 0
# Entry for /dev/sda1 :
UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a swap swap defaults 0 0
# Entry for /dev/sda7 :
UUID=b66608eb-f783-49db-afec-e8ed476f5f2c swap swap defaults 0 0
# Entry for /dev/sda8 :
UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c swap swap defaults 0 0
# Entry for /dev/sda10 :
UUID=6f009fc7-9fec-4f42-97e5-18c636936cc6 swap swap defaults 0 0

=================== sda6: Location of files loaded by Grub: ===================


 567.5GB: boot/grub/menu.lst
 567.5GB: boot/grub/stage2
 498.9GB: boot/initrd.img
 567.6GB: boot/initrd-server.img
 498.9GB: boot/initrd-2.6.33.5-server-2mnb.img
 567.6GB: boot/initrd-2.6.33.7-server-1mnb.img
 567.5GB: boot/vmlinuz
 567.6GB: boot/vmlinuz-server
 567.5GB: boot/vmlinuz-2.6.33.5-server-2mnb
 567.6GB: boot/vmlinuz-2.6.33.7-server-1mnb

=========================== sda9/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_fonts ###
### END /etc/grub.d/00_fonts ###

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="${saved_entry}"
if [ ${prev_saved_entry} ]; then
  set saved_entry=${prev_saved_entry}
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z ${boot_once} ]; then
    saved_entry=${chosen}
    save_env saved_entry
  fi
}
insmod ext2
set root='(hd0,9)'
search --no-floppy --fs-uuid --set 031025e1-05ba-4fa9-baf9-0fc077fa5d15
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=1024x768
  # vga= is deprecated, grub2 handles this just fine
  # making grub2 res == linux fb res
  set gfxpayload=keep
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
insmod ext2
set root='(hd0,9)'
search --no-floppy --fs-uuid --set 031025e1-05ba-4fa9-baf9-0fc077fa5d15
set locale_dir=($root)/boot/grub/locale
set lang=cs
insmod gettext
if sleep --interruptible 0 ; then
  set timeout=5
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_distro_theme ###
insmod ext2
set root='(hd0,9)'
search --no-floppy --fs-uuid --set 031025e1-05ba-4fa9-baf9-0fc077fa5d15
insmod png
if background_image /boot/grub/default-splash.png ; then
  set color_normal=white/black
  set color_highlight=magenta/black
else
  set menu_color_normal=cyan/blue
  set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_distro_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Sabayon GNU/Linux, with Linux x86-2.6.34-sabayon" --class sabayon --class gnu-linux --class gnu --class os {
	insmod ext2
	set root='(hd0,9)'
	search --no-floppy --fs-uuid --set 031025e1-05ba-4fa9-baf9-0fc077fa5d15
	echo	Loading Linux x86-2.6.34-sabayon ...
	linux	/boot/kernel-genkernel-x86-2.6.34-sabayon ro init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 quiet doslowusb scandelay=10 resume=swap:UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a real_resume=UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a root=/dev/ram0 ramdisk=8192 real_root=UUID=031025e1-05ba-4fa9-baf9-0fc077fa5d15 docrypt 
	echo	Loading initial ramdisk ...
	initrd	/boot/initramfs-genkernel-x86-2.6.34-sabayon
}
menuentry "Sabayon GNU/Linux, with Linux x86-2.6.34-sabayon (recovery mode)" --class sabayon --class gnu-linux --class gnu --class os {
	insmod ext2
	set root='(hd0,9)'
	search --no-floppy --fs-uuid --set 031025e1-05ba-4fa9-baf9-0fc077fa5d15
	echo	Loading Linux x86-2.6.34-sabayon ...
	linux	/boot/kernel-genkernel-x86-2.6.34-sabayon ro single init_opts=single init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 quiet doslowusb scandelay=10 resume=swap:UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a real_resume=UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a root=/dev/ram0 ramdisk=8192 real_root=UUID=031025e1-05ba-4fa9-baf9-0fc077fa5d15 docrypt
	echo	Loading initial ramdisk ...
	initrd	/boot/initramfs-genkernel-x86-2.6.34-sabayon
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "'Ubuntu, with Linux 2.6.35-19-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { (on /dev/sda12)" {
	insmod ext2
	set root='(hd0,12)'
	search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
	linux /boot/vmlinuz-2.6.35-19-generic-pae root=UUID=9029630d-4acb-48b4-bfd1-8ca6f16e6230 ro quiet splash
	initrd /boot/initrd.img-2.6.35-19-generic-pae
}
menuentry "'Ubuntu, with Linux 2.6.35-19-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { (on /dev/sda12)" {
	insmod ext2
	set root='(hd0,12)'
	search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
	linux /boot/vmlinuz-2.6.35-19-generic-pae root=UUID=9029630d-4acb-48b4-bfd1-8ca6f16e6230 ro single
	initrd /boot/initrd.img-2.6.35-19-generic-pae
}
menuentry "Desktop -- openSUSE 11.3 - 2.6.34-12 (on /dev/sda2)" {
	insmod ext2
	set root='(hd0,2)'
	search --no-floppy --fs-uuid --set 3ef47c3f-6c83-4631-a6ce-5001b0b045fc
	linux /boot/vmlinuz-2.6.34-12-desktop root=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part2 resume=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part8 splash=silent quiet showopts vga=0x31a
	initrd /boot/initrd-2.6.34-12-desktop
}
menuentry "Failsafe -- openSUSE 11.3 - 2.6.34-12 (on /dev/sda2)" {
	insmod ext2
	set root='(hd0,2)'
	search --no-floppy --fs-uuid --set 3ef47c3f-6c83-4631-a6ce-5001b0b045fc
	linux /boot/vmlinuz-2.6.34-12-desktop root=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part2 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a
	initrd /boot/initrd-2.6.34-12-desktop
}
menuentry "PCLinuxOS (on /dev/sda5)" {
	insmod ext2
	set root='(hd0,5)'
	search --no-floppy --fs-uuid --set 620603ca-f4c6-4bc8-bd11-aacc0c2a038a
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c splash=silent vga=788
	initrd (hd0,5)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda5)" {
	insmod ext2
	set root='(hd0,5)'
	search --no-floppy --fs-uuid --set 620603ca-f4c6-4bc8-bd11-aacc0c2a038a
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c
	initrd (hd0,5)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda5)" {
	insmod ext2
	set root='(hd0,5)'
	search --no-floppy --fs-uuid --set 620603ca-f4c6-4bc8-bd11-aacc0c2a038a
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a failsafe
	initrd (hd0,5)/boot/initrd.img
}
menuentry "Mandriva 2010.1 (on /dev/sda6)" {
	insmod ext2
	set root='(hd0,6)'
	search --no-floppy --fs-uuid --set 05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c splash=silent vga=788
	initrd (hd0,6)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda6)" {
	insmod ext2
	set root='(hd0,6)'
	search --no-floppy --fs-uuid --set 05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c
	initrd (hd0,6)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda6)" {
	insmod ext2
	set root='(hd0,6)'
	search --no-floppy --fs-uuid --set 05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa failsafe
	initrd (hd0,6)/boot/initrd.img
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

========================== sda9/boot/grub/grub.conf: ==========================

default=0
timeout=10
title=Sabayon Linux (kernel-genkernel-x86-2.6.34-sabayon)
	root (hd0,0)
	kernel /boot/kernel-genkernel-x86-2.6.34-sabayon BOOT_IMAGE=/boot/kernel-genkernel-x86-2.6.34-sabayon ro init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 quiet doslowusb scandelay=10 resume=swap:UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a real_resume=UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a root=/dev/ram0 ramdisk=8192 real_root=UUID=031025e1-05ba-4fa9-baf9-0fc077fa5d15 docrypt
	initrd /boot/initramfs-genkernel-x86-2.6.34-sabayon
	savedefault


=============================== sda9/etc/fstab: ===============================


#
# /etc/fstab
# Created by anaconda on Tue Sep  7 12:09:44 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=031025e1-05ba-4fa9-baf9-0fc077fa5d15 /                       ext4    defaults        1 1
UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a swap                    swap    defaults        0 0
UUID=6f009fc7-9fec-4f42-97e5-18c636936cc6 swap                    swap    defaults        0 0
UUID=b66608eb-f783-49db-afec-e8ed476f5f2c swap                    swap    defaults        0 0
UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c swap                    swap    defaults        0 0
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0

=================== sda9: Location of files loaded by Grub: ===================


 412.3GB: boot/grub/core.img
 373.7GB: boot/grub/grub.cfg
 412.3GB: boot/grub/grub.conf
 412.3GB: boot/grub/menu.lst
 412.3GB: boot/grub/stage2
 478.9GB: boot/initramfs-genkernel-x86-2.6.34-sabayon

========================== sda12/boot/grub/grub.cfg: ==========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos12)'
search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  load_video
  insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos12)'
search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
set locale_dir=($root)/boot/grub/locale
set lang=cs
insmod gettext
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-19-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos12)'
	search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
	linux	/boot/vmlinuz-2.6.35-19-generic-pae root=UUID=9029630d-4acb-48b4-bfd1-8ca6f16e6230 ro   quiet splash
	initrd	/boot/initrd.img-2.6.35-19-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.35-19-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos12)'
	search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
	echo	'Loading Linux 2.6.35-19-generic-pae ...'
	linux	/boot/vmlinuz-2.6.35-19-generic-pae root=UUID=9029630d-4acb-48b4-bfd1-8ca6f16e6230 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.35-19-generic-pae
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos12)'
	search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos12)'
	search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
menuentry "Memory test (memtest86+, experimental multiboot)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos12)'
	search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
	multiboot	/boot/memtest86+_multiboot.bin
}
menuentry "Memory test (memtest86+, serial console 115200, experimental multiboot)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos12)'
	search --no-floppy --fs-uuid --set 9029630d-4acb-48b4-bfd1-8ca6f16e6230
	multiboot	/boot/memtest86+_multiboot.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Desktop -- openSUSE 11.3 - 2.6.34-12 (on /dev/sda2)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set 3ef47c3f-6c83-4631-a6ce-5001b0b045fc
	linux /boot/vmlinuz-2.6.34-12-desktop root=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part2 resume=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part8 splash=silent quiet showopts vga=0x31a
	initrd /boot/initrd-2.6.34-12-desktop
}
menuentry "Failsafe -- openSUSE 11.3 - 2.6.34-12 (on /dev/sda2)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set 3ef47c3f-6c83-4631-a6ce-5001b0b045fc
	linux /boot/vmlinuz-2.6.34-12-desktop root=/dev/disk/by-id/ata-SAMSUNG_HD753LJ_S13UJ90S902466-part2 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a
	initrd /boot/initrd-2.6.34-12-desktop
}
menuentry "PCLinuxOS (on /dev/sda5)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set 620603ca-f4c6-4bc8-bd11-aacc0c2a038a
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c splash=silent vga=788
	initrd (hd0,5)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda5)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set 620603ca-f4c6-4bc8-bd11-aacc0c2a038a
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c
	initrd (hd0,5)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda5)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set 620603ca-f4c6-4bc8-bd11-aacc0c2a038a
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=620603ca-f4c6-4bc8-bd11-aacc0c2a038a failsafe
	initrd (hd0,5)/boot/initrd.img
}
menuentry "Mandriva 2010.0 (on /dev/sda6)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set 05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c splash=silent vga=788
	initrd (hd0,6)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda6)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set 05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa resume=UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c
	initrd (hd0,6)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda6)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set 05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=05d946e9-02e2-40e9-aed3-7f4dcd1ff2fa failsafe
	initrd (hd0,6)/boot/initrd.img
}
menuentry "Sabayon GNU/Linux, with Linux x86-2.6.34-sabayon (on /dev/sda9)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos9)'
	search --no-floppy --fs-uuid --set 0b67b2fb-486f-4923-9e65-4174dd4abbf1
	linux /boot/kernel-genkernel-x86-2.6.34-sabayon ro init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 quiet doslowusb scandelay=10 resume=swap:UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a real_resume=UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a root=/dev/ram0 ramdisk=8192 real_root=UUID=0b67b2fb-486f-4923-9e65-4174dd4abbf1 docrypt
	initrd /boot/initramfs-genkernel-x86-2.6.34-sabayon
}
menuentry "Sabayon GNU/Linux, with Linux x86-2.6.34-sabayon (recovery mode) (on /dev/sda9)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos9)'
	search --no-floppy --fs-uuid --set 0b67b2fb-486f-4923-9e65-4174dd4abbf1
	linux /boot/kernel-genkernel-x86-2.6.34-sabayon ro single init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 quiet doslowusb scandelay=10 resume=swap:UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a real_resume=UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a root=/dev/ram0 ramdisk=8192 real_root=UUID=0b67b2fb-486f-4923-9e65-4174dd4abbf1 docrypt
	initrd /boot/initramfs-genkernel-x86-2.6.34-sabayon
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

=============================== sda12/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda12 during installation
UUID=9029630d-4acb-48b4-bfd1-8ca6f16e6230 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda1 during installation
UUID=1cae7353-0a43-451b-9d30-f003aa8eaf5a none            swap    sw              0       0
# swap was on /dev/sda10 during installation
UUID=6f009fc7-9fec-4f42-97e5-18c636936cc6 none            swap    sw              0       0
# swap was on /dev/sda7 during installation
UUID=b66608eb-f783-49db-afec-e8ed476f5f2c none            swap    sw              0       0
# swap was on /dev/sda8 during installation
UUID=119d4d37-c80b-4e32-baa7-73ed6c1dbb9c none            swap    sw              0       0

=================== sda12: Location of files loaded by Grub: ===================


 598.8GB: boot/grub/core.img
 609.9GB: boot/grub/grub.cfg
 602.5GB: boot/initrd.img-2.6.35-19-generic-pae
 597.1GB: boot/initrd.img-2.6.35-20-generic-pae
 597.0GB: boot/initrd.img-2.6.35-22-generic-pae
 598.8GB: boot/vmlinuz-2.6.35-19-generic-pae
 601.7GB: boot/vmlinuz-2.6.35-20-generic-pae
 602.9GB: boot/vmlinuz-2.6.35-22-generic-pae
 597.0GB: initrd.img
 597.1GB: initrd.img.old
 602.9GB: vmlinuz
 601.7GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============

sdb sdc sdd sde ]

phplus · « **Odpověď #11 kdy:** 17 Září 2010, 14:19:24 »

Omlouvám se za předchozí blbost.

petergula · « **Odpověď #12 kdy:** 17 Září 2010, 17:30:00 »

Citace: phplus 17 Září 2010, 14:19:24

Omlouvám se za předchozí blbost.

Skus ak je dlhsi kod/vypis pouzit #vlozit kod - znacku code
napr:

Kód: [Vybrat]

blablabla
blablabla
blablabla
...

Autor Téma: Grub versus grub 2 (Přečteno 4029 krát)

phplus

Grub versus grub 2

compaq

Re: Grub versus grub 2

phplus

Re: Grub versus grub 2

arrange

Re: Grub versus grub 2

phplus

Re: Grub versus grub 2

phplus

Re: Grub versus grub 2

phplus

Re: Grub versus grub 2

jmp

Re: Grub versus grub 2

phplus

Re: Grub versus grub 2

jmp

Re: Grub versus grub 2

phplus

Re: Grub versus grub 2

phplus

Re: Grub versus grub 2

petergula

Re: Grub versus grub 2