Ještě mi to vyhodilo Modprobe toto:
For candidate card in slot 01:07.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:07.0 11c1:048f 1848:0001 Communication controller: Agere Systems V.92 56k WinModem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:07.0 ----
[ 0.160873] pci 0000:01:07.0: reg 10: [mem 0xf5000000-0xf50000ff]
[ 0.160878] pci 0000:01:07.0: reg 14: [io 0xb000-0xb007]
[ 0.160883] pci 0000:01:07.0: reg 18: [io 0xb400-0xb4ff]
[ 0.160908] pci 0000:01:07.0: supports D2
[ 0.160910] pci 0000:01:07.0: PME# supported from D2 D3hot D3cold
[ 0.160913] pci 0000:01:07.0: PME# disabled
The PCI slot 01:07.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.
For candidate card in slot 00:07.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:07.0 10de:055c 1458:a002 Audio device: nVidia Corporation MCP67 High Definition Audio
Modem interrupt assignment and sharing:
20: 71 59979 IO-APIC-fasteoi ohci_hcd:usb3, hda_intel
--- Bootup diagnostics for card in PCI slot 00:07.0 ----
[ 0.160582] pci 0000:00:07.0: reg 10: [mem 0xf5100000-0xf5103fff]
[ 0.160605] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.160608] pci 0000:00:07.0: PME# disabled
[ 15.836043] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 15.836082] HDA Intel 0000:00:07.0: setting latency timer to 64
The PCI slot 00:07.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 01:07.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems V.92 56k WinModem "
CLASS=0780
PCIDEV=11c1:048f
SUBSYS=1848:0001
IRQ=10
HDA2=00:07.0
IDENT=agrsm
For candidate modem in: 01:07.0
0780 Communication controller: Agere Systems V.92 56k WinModem
Primary device ID: 11c1:048f
Support type needed or chipset: agrsm
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair.
There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems this can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.
All of the above packages are dkms competent. This means that if your Linux distros dkms package
is previously installed, if provides for future updates matching forthcoming kernels.
-------------- end Agere Systems section -------------------
Postupoval jsem podle toho, nainstaloval balíčky, ale tomu dál nerozumím. nemůžete někdo poradit?
Téma: Agere Systems V.92 56k WinModem (rev 02) - jak zprovoznít v Ubuntu Maverick +86 (Přečteno 2344 krát)