Pridam se k tematu. Reseni nemam, spis jen par zkusenosti s pcmcia kartou belkin s cipem atheros (presne oznaceni pripadne dopisu, az budu doma - je to AR5007G).
Chovalo se to podobne - kdysi ve starsi verzi (asi 9.04) v pohode slapala s WPA, ale pak po povyseni se nepripojila.
Zkousel jsem i WICD misto NM a stejny vysledek, jen s tim rozdilem, ze to aspon vyhodilo hlasku, ze se nepodarilo ziskat IP adresu. Bez zabezpeceni se v pohode pripoji a funguje.
Nepamatuji si uz, jestli v 9.10 jeste fungovala, ale v 10.04 a 10.10 popsany problem je.
2 starenka: po neuspesnem pokusu o pripojeni je v dmesg vic radku, nez se vejde do tail... Prikladam, jestli z toho pujde neco vykoukat.[ 843.688409] wlan0: authenticate with 00:27:19:19:42:18 (try 1)
[ 843.693180] wlan0: authenticated
[ 843.693262] wlan0: associate with 00:27:19:19:42:18 (try 1)
[ 843.697240] wlan0: RX AssocResp from 00:27:19:19:42:18 (capab=0x431 status=0 aid=1)
[ 843.697252] wlan0: associated
[ 849.869198] wlan0: deauthenticated from 00:27:19:19:42:18 (Reason: 1)
[ 849.870160] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 849.870174] cfg80211: Restoring regulatory settings
[ 849.870183] cfg80211: Calling CRDA to update world regulatory domain
[ 849.892438] cfg80211: World regulatory domain updated:
[ 849.892453] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 849.892461] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 849.892469] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 849.892476] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 849.892483] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 849.892490] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 851.053009] wlan0: authenticate with 00:27:19:19:42:18 (try 1)
[ 851.054737] wlan0: authenticated
[ 851.054807] wlan0: associate with 00:27:19:19:42:18 (try 1)
[ 851.058448] wlan0: RX AssocResp from 00:27:19:19:42:18 (capab=0x431 status=0 aid=1)
[ 851.058458] wlan0: associated
[ 880.849754] wlan0: deauthenticated from 00:27:19:19:42:18 (Reason: 1)
[ 880.850753] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 880.850768] cfg80211: Restoring regulatory settings
[ 880.850777] cfg80211: Calling CRDA to update world regulatory domain
[ 880.864741] cfg80211: World regulatory domain updated:
[ 880.864757] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 880.864765] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 880.864773] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 880.864780] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 880.864787] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 880.864794] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 882.032353] wlan0: authenticate with 00:27:19:19:42:18 (try 1)
[ 882.033890] wlan0: authenticated
[ 882.033948] wlan0: associate with 00:27:19:19:42:18 (try 1)
[ 882.037307] wlan0: RX AssocResp from 00:27:19:19:42:18 (capab=0x431 status=0 aid=1)
[ 882.037317] wlan0: associated
[ 890.688689] wlan0: deauthenticating from 00:27:19:19:42:18 by local choice (reason=3)
[ 890.690380] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 890.690457] cfg80211: Restoring regulatory settings
[ 890.690467] cfg80211: Calling CRDA to update world regulatory domain
[ 890.717138] cfg80211: World regulatory domain updated:
[ 890.717154] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 890.717163] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 890.717170] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 890.717177] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 890.717184] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 890.717191] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)