Instalace wifi driveru [vyřešeno]

[Martin Černý]

Ahoj,

koupil jsem si nový notes a potřeboval bych poradit s instalací ovladače na wi-fi, na netu jsem našel tento návod ale bohužel jsem se zasekl u kompilace.

Kód: [Vybrat]

martin@Cernochovo:/usr/src/rtl8192ce_linux_2.6.0005.1116.2010$ sudo make
make[1]: Entering directory `/usr/src/linux-headers-2.6.35-23-generic'
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_core.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_eeprom.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_wx.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_cam.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_pm.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_pci.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_ps.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_debug.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_ethtool.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_regd.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_tx.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_rx.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_Efuse.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_firmware.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dmbt.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dmout.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dm.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_rtl6052.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_hwimg.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_led.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_com.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_rx.o
/usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_rx.c: In function ‘rtllib_FlushRxTsPendingPkts’:
/usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_rx.c:1297: warning: the frame size of 1040 bytes is larger than 1024 bytes
/usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_rx.c: In function ‘RxReorderIndicatePacket’:
/usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_rx.c:1488: warning: the frame size of 1072 bytes is larger than 1024 bytes
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_softmac.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_tx.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_wx.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_module.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_softmac_wx.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_HTProc.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_TSProc.o
/usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_TSProc.c: In function ‘RxPktPendingTimeout’:
/usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_TSProc.c:99: warning: the frame size of 1056 bytes is larger than 1024 bytes
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_BAProc.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/dot11d.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_tkip.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_ccmp.o
  CC [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_wep.o
  LD [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.mod.o
  LD [M]  /usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-23-generic'



martin@Cernochovo:/usr/src/rtl8192ce_linux_2.6.0005.1116.2010$ sudo make install
make[1]: Entering directory `/usr/src/linux-headers-2.6.35-23-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-23-generic'
make[1]: Entering directory `/usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192'
make -C /lib/modules/2.6.35-23-generic/build M= CC=gcc modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.35-23-generic'
  CHK     include/linux/version.h
  CHK     include/generated/utsrelease.h
make[3]: *** No rule to make target `kernel/bounds.c', needed by `kernel/bounds.s'.  Stop.
make[2]: *** [prepare0] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.35-23-generic'
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/usr/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192'
make: *** [install] Error 2

Nevíte prosím někdo proč to vypisuje error 2 a No rule to make target..., na netu jsem k tomu našel nějaký diskuze, ale všechno je to takový zmatený, zajímalo by mně jestli s tím má někdo zkušenost a eventulelně zda-li by mi poradil.  


Dík Martin

[Martin Černý]

Ahoj,

tak jsem z toho jelen, přijdu z práce, říkám si že to ještě prozkouším před tím než se půjdu učit, sudo su, make, make install a ono se to nainstalovalo :-D , je nějaký rozdíl mezi pracováním pod rootem a pracováním se sudo? Neměl by být ne?


Martin