FPS kolem 60, vypnuti Vblank nepomáhá [VYŘEŠENO]

[EnemyXP]

Zdravím potřeboval bych poradit. Můj NB ACER Extensa 5635: Intel Core 2 Duo T6620, grafika Intel GMA 4500MHD, RAM 3GB. Linux UBUNTU 10.10.
Problém: Při přehrávání HD videí ve VLC, nebo v Mplayer se některá videa zasekávají a kostičkují. Nezáleží na formátu daného videa, určitá videa daného formátu přehraje bezproblémů, jiná se zasekávají.
Diagnostika: pomocí glxgears jsem naměřil 60FPS, pokoušel jsem se vypnout v Compizu nastavení Sync To Vblank, ale nemá žádný vliv a FPS je stále na hodnotě 60.
Doma mám druhý NB Lenovo SL510 se stejbou grafikou Intel GMA 4500MHD s procesorem Intel Core 2 Duo T6570, RAM 3GB a zde přehraju cokoliv bez problémů. Pomocí glxgears naměřím FPS okolo 3400. Opět na UBUNTU 10.10.
Otázka: Nevíte jak vypnout synchronizaci grafiky s frekvencí monitoru bez použití Compizu? Díky moc už to řeším 2 týdny a na nic nemůžu přijít

[sabraq]

Prosím pěkně, opravdu je Sync to Vblank to stejné jako Vsync? Ale někde tady jsem četl podobný problém - ty fps, akorát to bylo myslím s jiným grafickým čipem.

http://en.wikipedia.org/wiki/Vertical_blanking_interval

Těch 60 Fps by spíš souviselo s vertikální synchronizací, která je použitelná ve hrách když má člověk CRT monitor, ne LCD. Ovšem nevím jestli se dá ošetřit třeba parametrem v xorg.conf. Zkusil bych spíš driconf.

[EnemyXP]

Díky za radu Nainstaloval jsme si driconf a deaktivoval jsem Synchronization with vertical refresh, bohuzel to vsak nepomohlo Nemuze to byt nekde v nastaveni graficke karty? Jestli jo poradi nekdo jak k tomu nastaveni dostat? Diky

[sabraq]

Díky za radu Nainstaloval jsme si driconf a deaktivoval jsem Synchronization with vertical refresh, bohuzel to vsak nepomohlo Nemuze to byt nekde v nastaveni graficke karty? Jestli jo poradi nekdo jak k tomu nastaveni dostat? Diky

Já nevím, intela mám na notebooku a fps mám víc než 60. V manuálové stránce intelu man intel jsem našel akorát XV_SYNC_TO_VBLANK, ale to by mělo fungovat akorát při přehrávání videa přes xv. A v manuálu xorgu není nic. Kdyžtak sem pástni nebo přibal soubor /var/log/xorg.0.log, třeba na něco přijdeme.

[EnemyXP]

Snad to pomuze
V podstate mam 2 identicke NB, jeden Lenovo, druhy Acer. Na obou je stejna verze Ubuntu i stejna grafika a presto to na Aceru nefunguje. Jestli nebude problem v tom ze je Acer 64b, protoze ty HD filmy se sekaji i ve Windows Vista. Zajimave je, ze kdyz ty filmy pustim ve Windows Media Playeru tak jdou bez problemu, ale ve VLC se sekaji.

Kód: [Vybrat]


[    19.860]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[    19.860] X Protocol Version 11, Revision 0
[    19.860] Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
[    19.860] Current Operating System: Linux ofa-Extensa-5635 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 11:55:36 UTC 2010 x86_64
[    19.860] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=9c2e1821-7b98-44ef-b591-ae2656ade6f5 ro quiet splash
[    19.860] Build Date: 16 September 2010  06:18:41PM
[    19.860] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support)
[    19.860] Current version of pixman: 0.18.4
[    19.860] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    19.860] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.860] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan  6 09:52:28 2011
[    19.892] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.892] (==) No Layout section.  Using the first Screen section.
[    19.892] (==) No screen section available. Using defaults.
[    19.892] (**) |-->Screen "Default Screen Section" (0)
[    19.892] (**) |   |-->Monitor "<default monitor>"
[    19.893] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    19.893] (==) Automatically adding devices
[    19.893] (==) Automatically enabling devices
[    19.893] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    19.893] Entry deleted from font path.
[    19.893] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    19.893] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    19.893] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.893] (II) Loader magic: 0x7d0200
[    19.893] (II) Module ABI versions:
[    19.893] X.Org ANSI C Emulation: 0.4
[    19.893] X.Org Video Driver: 8.0
[    19.893] X.Org XInput driver : 11.0
[    19.893] X.Org Server Extension : 4.0
[    19.895] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0253 rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[    19.895] (--) PCI: (0:0:2:1) 8086:2a43:1025:0253 rev 7, Mem @ 0xf0400000/1048576
[    19.895] (II) Open ACPI successful (/var/run/acpid.socket)
[    19.895] (II) LoadModule: "extmod"
[    19.927] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    19.927] (II) Module extmod: vendor="X.Org Foundation"
[    19.928] compiled for 1.9.0, module version = 1.0.0
[    19.928] Module class: X.Org Server Extension
[    19.928] ABI class: X.Org Server Extension, version 4.0
[    19.928] (II) Loading extension MIT-SCREEN-SAVER
[    19.928] (II) Loading extension XFree86-VidModeExtension
[    19.928] (II) Loading extension XFree86-DGA
[    19.928] (II) Loading extension DPMS
[    19.928] (II) Loading extension XVideo
[    19.928] (II) Loading extension XVideo-MotionCompensation
[    19.928] (II) Loading extension X-Resource
[    19.928] (II) LoadModule: "dbe"
[    19.928] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    19.928] (II) Module dbe: vendor="X.Org Foundation"
[    19.928] compiled for 1.9.0, module version = 1.0.0
[    19.928] Module class: X.Org Server Extension
[    19.928] ABI class: X.Org Server Extension, version 4.0
[    19.928] (II) Loading extension DOUBLE-BUFFER
[    19.928] (II) LoadModule: "glx"
[    19.928] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    19.929] (II) Module glx: vendor="X.Org Foundation"
[    19.929] compiled for 1.9.0, module version = 1.0.0
[    19.929] ABI class: X.Org Server Extension, version 4.0
[    19.929] (==) AIGLX enabled
[    19.929] (II) Loading extension GLX
[    19.929] (II) LoadModule: "record"
[    19.929] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    19.929] (II) Module record: vendor="X.Org Foundation"
[    19.929] compiled for 1.9.0, module version = 1.13.0
[    19.929] Module class: X.Org Server Extension
[    19.929] ABI class: X.Org Server Extension, version 4.0
[    19.929] (II) Loading extension RECORD
[    19.929] (II) LoadModule: "dri"
[    19.930] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    19.930] (II) Module dri: vendor="X.Org Foundation"
[    19.930] compiled for 1.9.0, module version = 1.0.0
[    19.930] ABI class: X.Org Server Extension, version 4.0
[    19.930] (II) Loading extension XFree86-DRI
[    19.930] (II) LoadModule: "dri2"
[    19.930] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    19.931] (II) Module dri2: vendor="X.Org Foundation"
[    19.931] compiled for 1.9.0, module version = 1.2.0
[    19.931] ABI class: X.Org Server Extension, version 4.0
[    19.931] (II) Loading extension DRI2
[    19.931] (==) Matched intel as autoconfigured driver 0
[    19.931] (==) Matched vesa as autoconfigured driver 1
[    19.931] (==) Matched fbdev as autoconfigured driver 2
[    19.931] (==) Assigned the driver to the xf86ConfigLayout
[    19.931] (II) LoadModule: "intel"
[    19.931] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    19.931] (II) Module intel: vendor="X.Org Foundation"
[    19.931] compiled for 1.9.0, module version = 2.12.0
[    19.932] Module class: X.Org Video Driver
[    19.932] ABI class: X.Org Video Driver, version 8.0
[    19.932] (II) LoadModule: "vesa"
[    19.932] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    19.932] (II) Module vesa: vendor="X.Org Foundation"
[    19.932] compiled for 1.8.99.905, module version = 2.3.0
[    19.932] Module class: X.Org Video Driver
[    19.932] ABI class: X.Org Video Driver, version 8.0
[    19.932] (II) LoadModule: "fbdev"
[    19.933] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    19.933] (II) Module fbdev: vendor="X.Org Foundation"
[    19.933] compiled for 1.8.99.905, module version = 0.4.2
[    19.933] ABI class: X.Org Video Driver, version 8.0
[    19.933] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[    19.934] (II) VESA: driver for VESA chipsets: vesa
[    19.934] (II) FBDEV: driver for framebuffer: fbdev
[    19.934] (++) using VT number 7

[    19.934] (WW) Falling back to old probe method for vesa
[    19.934] (WW) Falling back to old probe method for fbdev
[    19.934] (II) Loading sub module "fbdevhw"
[    19.934] (II) LoadModule: "fbdevhw"
[    19.935] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    19.935] (II) Module fbdevhw: vendor="X.Org Foundation"
[    19.935] compiled for 1.9.0, module version = 0.0.2
[    19.935] ABI class: X.Org Video Driver, version 8.0
[    19.938] drmOpenDevice: node name is /dev/dri/card0
[    19.938] drmOpenDevice: open result is 9, (OK)
[    19.938] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    19.938] drmOpenDevice: node name is /dev/dri/card0
[    19.938] drmOpenDevice: open result is 9, (OK)
[    19.938] drmOpenByBusid: drmOpenMinor returns 9
[    19.938] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    19.938] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    19.938] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    19.938] (==) intel(0): RGB weight 888
[    19.938] (==) intel(0): Default visual is TrueColor
[    19.938] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    19.938] (--) intel(0): Chipset: "GM45"
[    19.939] (==) intel(0): video overlay key set to 0x101fe
[    19.980] (II) intel(0): Output VGA1 has no monitor section
[    19.980] (II) intel(0): Output LVDS1 has no monitor section
[    19.980] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    19.989] (II) intel(0): Output HDMI1 has no monitor section
[    19.990] (II) intel(0): Output DP1 has no monitor section
[    19.991] (II) intel(0): Output DP2 has no monitor section
[    20.030] (II) intel(0): EDID for output VGA1
[    20.070] (II) intel(0): EDID for output LVDS1
[    20.070] (II) intel(0): Manufacturer: AUO  Model: 21ec  Serial#: 0
[    20.070] (II) intel(0): Year: 2008  Week: 1
[    20.070] (II) intel(0): EDID Version: 1.3
[    20.070] (II) intel(0): Digital Display Input
[    20.070] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    20.070] (II) intel(0): Gamma: 2.20
[    20.070] (II) intel(0): No DPMS capabilities specified
[    20.070] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    20.071] (II) intel(0): First detailed timing is preferred mode
[    20.071] (II) intel(0): redX: 0.610 redY: 0.353   greenX: 0.329 greenY: 0.616
[    20.071] (II) intel(0): blueX: 0.149 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
[    20.071] (II) intel(0): Manufacturer's mask: 0
[    20.071] (II) intel(0): Supported detailed timing:
[    20.071] (II) intel(0): clock: 69.5 MHz   Image Size:  344 x 193 mm
[    20.071] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1437 h_border: 0
[    20.071] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
[    20.071] (II) intel(0): Unknown vendor-specific block f
[    20.071] (II) intel(0):  AUO
[    20.071] (II) intel(0):  B156XW02 V1
[    20.071] (II) intel(0): EDID (in hex):
[    20.071] (II) intel(0): 00ffffffffffff0006afec2100000000
[    20.071] (II) intel(0): 01120103802213780a57559c5a549d26
[    20.071] (II) intel(0): 1a505400000001010101010101010101
[    20.071] (II) intel(0): 010101010101261b5647500026303020
[    20.071] (II) intel(0): 340058c1100000180000000f00000000
[    20.071] (II) intel(0): 00000000000000000020000000fe0041
[    20.071] (II) intel(0): 554f0a202020202020202020000000fe
[    20.071] (II) intel(0): 004231353658573032205631200a002c
[    20.071] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    20.072] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    20.072] (II) intel(0): Printing probed modes for output LVDS1
[    20.072] (II) intel(0): Modeline "1366x768"x59.6   69.50  1366 1414 1446 1447  768 771 775 806 -hsync -vsync (48.0 kHz)
[    20.072] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    20.072] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[    20.072] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    20.072] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    20.072] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    20.072] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    20.081] (II) intel(0): EDID for output HDMI1
[    20.082] (II) intel(0): EDID for output DP1
[    20.083] (II) intel(0): EDID for output DP2
[    20.083] (II) intel(0): Output VGA1 disconnected
[    20.083] (II) intel(0): Output LVDS1 connected
[    20.083] (II) intel(0): Output HDMI1 disconnected
[    20.083] (II) intel(0): Output DP1 disconnected
[    20.083] (II) intel(0): Output DP2 disconnected
[    20.084] (II) intel(0): Using exact sizes for initial modes
[    20.084] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    20.084] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.084] (II) intel(0): Kernel page flipping support detected, but forcibly disabled.
[    20.084] (==) intel(0): DPI set to (96, 96)
[    20.084] (II) Loading sub module "fb"
[    20.084] (II) LoadModule: "fb"
[    20.084] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.085] (II) Module fb: vendor="X.Org Foundation"
[    20.085] compiled for 1.9.0, module version = 1.0.0
[    20.085] ABI class: X.Org ANSI C Emulation, version 0.4
[    20.085] (II) UnloadModule: "vesa"
[    20.085] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.085] (II) UnloadModule: "fbdev"
[    20.085] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.085] (II) UnloadModule: "fbdevhw"
[    20.085] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[    20.085] (==) Depth 24 pixmap format is 32 bpp
[    20.085] (II) intel(0): [DRI2] Setup complete
[    20.085] (II) intel(0): [DRI2]   DRI driver: i965
[    20.085] (**) intel(0): Tiling enabled
[    20.085] (**) intel(0): SwapBuffers wait enabled
[    20.085] (==) intel(0): VideoRam: 262144 KB
[    20.085] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    20.100] (II) UXA(0): Driver registered support for the following operations:
[    20.101] (II)         solid
[    20.101] (II)         copy
[    20.101] (II)         composite (RENDER acceleration)
[    20.101] (II)         put_image
[    20.101] (II)         get_image
[    20.101] (==) intel(0): Backing store disabled
[    20.101] (==) intel(0): Silken mouse enabled
[    20.101] (II) intel(0): Initializing HW Cursor
[    20.140] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.163] (==) intel(0): DPMS enabled
[    20.163] (==) intel(0): Intel XvMC decoder enabled
[    20.163] (II) intel(0): Set up textured video
[    20.163] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    20.163] (II) intel(0): direct rendering: DRI2 Enabled
[    20.164] (--) RandR disabled
[    20.164] (II) Initializing built-in extension Generic Event Extension
[    20.164] (II) Initializing built-in extension SHAPE
[    20.164] (II) Initializing built-in extension MIT-SHM
[    20.164] (II) Initializing built-in extension XInputExtension
[    20.164] (II) Initializing built-in extension XTEST
[    20.164] (II) Initializing built-in extension BIG-REQUESTS
[    20.164] (II) Initializing built-in extension SYNC
[    20.164] (II) Initializing built-in extension XKEYBOARD
[    20.164] (II) Initializing built-in extension XC-MISC
[    20.164] (II) Initializing built-in extension SECURITY
[    20.164] (II) Initializing built-in extension XINERAMA
[    20.164] (II) Initializing built-in extension XFIXES
[    20.164] (II) Initializing built-in extension RENDER
[    20.164] (II) Initializing built-in extension RANDR
[    20.164] (II) Initializing built-in extension COMPOSITE
[    20.164] (II) Initializing built-in extension DAMAGE
[    20.164] (II) Initializing built-in extension GESTURE
[    20.178] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    20.178] (II) AIGLX: enabled GLX_INTEL_swap_event
[    20.178] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    20.178] (II) AIGLX: enabled GLX_SGI_make_current_read
[    20.178] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    20.178] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[    20.178] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.179] (II) intel(0): Setting screen physical size to 361 x 203
[    20.208] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    20.222] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    20.222] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.222] (II) LoadModule: "evdev"
[    20.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.223] (II) Module evdev: vendor="X.Org Foundation"
[    20.223] compiled for 1.9.0, module version = 2.3.2
[    20.223] Module class: X.Org XInput Driver
[    20.223] ABI class: X.Org XInput driver, version 11.0
[    20.223] (**) Power Button: always reports core events
[    20.223] (**) Power Button: Device: "/dev/input/event3"
[    20.250] (II) Power Button: Found keys
[    20.250] (II) Power Button: Configuring as keyboard
[    20.250] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    20.250] (**) Option "xkb_rules" "evdev"
[    20.250] (**) Option "xkb_model" "evdev"
[    20.250] (**) Option "xkb_layout" "cz"
[    20.250] (**) Option "xkb_variant" "qwerty_bksl"
[    20.253] (II) XKB: reuse xkmfile /var/lib/xkb/server-29F0EEE1C19897B7B13ADE753762641A489F427A.xkm
[    20.255] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    20.255] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.255] (**) Video Bus: always reports core events
[    20.255] (**) Video Bus: Device: "/dev/input/event7"
[    20.282] (II) Video Bus: Found keys
[    20.282] (II) Video Bus: Configuring as keyboard
[    20.282] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    20.282] (**) Option "xkb_rules" "evdev"
[    20.282] (**) Option "xkb_model" "evdev"
[    20.282] (**) Option "xkb_layout" "cz"
[    20.282] (**) Option "xkb_variant" "qwerty_bksl"
[    20.285] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.285] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.285] (**) Power Button: always reports core events
[    20.285] (**) Power Button: Device: "/dev/input/event1"
[    20.312] (II) Power Button: Found keys
[    20.312] (II) Power Button: Configuring as keyboard
[    20.312] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    20.312] (**) Option "xkb_rules" "evdev"
[    20.312] (**) Option "xkb_model" "evdev"
[    20.312] (**) Option "xkb_layout" "cz"
[    20.312] (**) Option "xkb_variant" "qwerty_bksl"
[    20.313] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    20.313] (II) No input driver/identifier specified (ignoring)
[    20.313] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    20.313] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.313] (**) Sleep Button: always reports core events
[    20.313] (**) Sleep Button: Device: "/dev/input/event2"
[    20.332] (II) Sleep Button: Found keys
[    20.332] (II) Sleep Button: Configuring as keyboard
[    20.332] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    20.332] (**) Option "xkb_rules" "evdev"
[    20.332] (**) Option "xkb_model" "evdev"
[    20.332] (**) Option "xkb_layout" "cz"
[    20.332] (**) Option "xkb_variant" "qwerty_bksl"
[    20.335] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[    20.335] (II) No input driver/identifier specified (ignoring)
[    20.336] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    20.336] (II) No input driver/identifier specified (ignoring)
[    20.336] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[    20.336] (II) No input driver/identifier specified (ignoring)
[    20.339] (II) config/udev: Adding input device Video WebCam (/dev/input/event5)
[    20.339] (**) Video WebCam: Applying InputClass "evdev keyboard catchall"
[    20.339] (**) Video WebCam: always reports core events
[    20.340] (**) Video WebCam: Device: "/dev/input/event5"
[    20.362] (II) Video WebCam: Found keys
[    20.362] (II) Video WebCam: Configuring as keyboard
[    20.362] (II) XINPUT: Adding extended input device "Video WebCam" (type: KEYBOARD)
[    20.362] (**) Option "xkb_rules" "evdev"
[    20.362] (**) Option "xkb_model" "evdev"
[    20.362] (**) Option "xkb_layout" "cz"
[    20.362] (**) Option "xkb_variant" "qwerty_bksl"
[    20.366] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    20.366] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.367] (**) AT Translated Set 2 keyboard: always reports core events
[    20.367] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    20.390] (II) AT Translated Set 2 keyboard: Found keys
[    20.390] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    20.390] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    20.390] (**) Option "xkb_rules" "evdev"
[    20.390] (**) Option "xkb_model" "evdev"
[    20.390] (**) Option "xkb_layout" "cz"
[    20.390] (**) Option "xkb_variant" "qwerty_bksl"
[    20.391] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[    20.391] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    20.391] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    20.391] (II) LoadModule: "synaptics"
[    20.391] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    20.392] (II) Module synaptics: vendor="X.Org Foundation"
[    20.392] compiled for 1.9.0, module version = 1.2.2
[    20.392] Module class: X.Org XInput Driver
[    20.392] ABI class: X.Org XInput driver, version 11.0
[    20.392] (II) Synaptics touchpad driver version 1.2.2
[    20.392] (**) Option "Device" "/dev/input/event6"
[    20.560] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5682
[    20.560] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4692
[    20.560] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    20.560] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[    20.560] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[    20.650] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    20.650] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    20.720] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    20.720] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    20.720] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[    20.720] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    20.720] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    20.800] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    20.800] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    20.800] (II) No input driver/identifier specified (ignoring)
[    22.830] (II) intel(0): EDID vendor "AUO", prod id 8684
[    22.882] (II) intel(0): EDID vendor "AUO", prod id 8684
[    22.952] (II) intel(0): EDID vendor "AUO", prod id 8684
[    23.006] (II) intel(0): EDID vendor "AUO", prod id 8684
[    24.082] (II) intel(0): EDID vendor "AUO", prod id 8684
[    28.890] (II) intel(0): EDID vendor "AUO", prod id 8684
[   738.520] (II) intel(0): EDID vendor "AUO", prod id 8684
[  7183.790] (II) AIGLX: Suspending AIGLX clients for VT switch
[  7189.518] (II) Open ACPI successful (/var/run/acpid.socket)
[  7189.518] (II) AIGLX: Resuming AIGLX clients after VT switch
[  7189.518] (EE) intel(0): Couldn't create pixmap for fbcon
[  7189.580] (II) intel(0): EDID vendor "AUO", prod id 8684
[  7189.670] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  7189.720] (II) Power Button: Device reopened after 1 attempts.
[  7189.750] (II) Video Bus: Device reopened after 1 attempts.
[  7189.780] (II) Power Button: Device reopened after 1 attempts.
[  7189.802] (II) Sleep Button: Device reopened after 1 attempts.
[  7189.830] (II) Video WebCam: Device reopened after 1 attempts.
[  7189.860] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
[  8238.160] (II) intel(0): EDID vendor "AUO", prod id 8684
[ 14159.922] (II) intel(0): EDID vendor "AUO", prod id 8684
[ 14851.340] (II) intel(0): EDID vendor "AUO", prod id 8684



[sabraq]

V této diskuzi tvrdí http://forums.gentoo.org/viewtopic-t-773957.html, že 60Hz je u intelu standardně zapnuto. Já nevím, ale možná je to až ve verzi, která je v 10.10, na notebooku mi běží 10.04 a fps cca.300. Ten tázající se diskutér tvrdí, že vypl Vsync pomocí Driconf, ale ani já jsem to tam nikde nenašel. Možná se to skrývá pod jiným názvem. V tom logu myslím co se týče tohoto nic není.

[EnemyXP]

No je to zapeklity problem Na NB Lenovo mam take stejnou grafiku s Ubuntu 10.10 a namerim fps okolo 3400, podstatne je ze jsem vubec nic nemusel nastavovat tzn. hned po instalaci Ubuntu jsem mel FPS vetsi nez 60.
Mam teda zkusit nainstalovat nejakou starsi verzi UBUNTU? Jeste jsem se pokousel preinstalovat ovladace graf. karty podle tohoto navodu, ale nepodarilo se mi to, jelikoz se nemohu pripojit ke keyserveru.
http://www.howtoforge.com/how-to-install-latest-intel-driver-2.12-on-ubuntu-10.04-lucid-lynx
Uz jsem k tomutu zalozil novy prispevek http://forum.ubuntu.cz/index.php/topic,53153.0.html

[sabraq]

Odpověděl jsem v tom druhém vlákně.

[EnemyXP]

Vypnutí Sync To Vblank v Compizu nepomohlo a FPS je stále na hodnotě okolo 60fps. Nicméně kdo má problémy s přehráváním HD videí, tak mi pomohlo tato konfigurace VLC. V Nástroje ->Předvolby->Vstup & kodeky použít pro nastavení Skip H.264 in loop deblocking filter položku Kompletní. HD filmy se již netrhají
Tímto jsem uzavřel svůj primární problém a uzavírám toto vlákno. Velmi děkuji Sabragovi za pomoc a trpělivost s kterou mi musel vše vysvětlovat

[sabraq]

No, není zač. Asi to bude defaultně zapnuto v ovladači.