Prosím o pomoc s wifi usb getnet gn-531u

[capsle1]

Zdravím pořídil jsem si wifi flashku a nejde mi spustit, na fóru jsem nic nenašel jen že nějakej týpek má podobnou a taky si s ní neví rady. (jsem nováček)

tady posílám co mi píše readme_sta_usb:

Kód: [Vybrat]

* README
*
* Ralink Tech Inc.
*
* http://www.ralinktech.com
*

=======================================================================
ModelName:
===========
RT2870 Wireless Lan Linux Driver


=======================================================================
Driver lName:
===========
rt2870.o/rt2870.ko


=======================================================================
Supporting Kernel:
===================
linux kernel 2.4 and 2.6 series.
Tested in Redhat 7.3 or later.


=======================================================================
Ralink Hardware:
===================
Ralink 802.11n Wireless LAN Card.


=======================================================================
Description:
=============
This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card.


=======================================================================
Contents:
=============
Makefile         : Makefile
*.c : c files
*.h : header files


=======================================================================
Features:
==========
   This driver implements basic IEEE802.11. Infrastructure and adhoc mode with
   open or shared or WPA-PSK or WPA2-PSK authentication method.
   NONE, WEP, TKIP and AES encryption.


=======================================================================
Build Instructions: 
====================

1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
    go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
   
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.

3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
   => #>cd wpa_supplicant-x.x
   => #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
   => #>cd wpa_supplicant-0.5.7
   => #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d

4> $make
# compile driver source code
# To fix "error: too few arguments to function ĄĽiwe_stream_add_event"
  => $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c

5> $cp RT2870STA.dat  /etc/Wireless/RT2870STA/RT2870STA.dat
   
6> load driver, go to "os/linux/" directory.
    #[kernel 2.4]
    #    $/sbin/insmod rt2870sta.o
    #    $/sbin/ifconfig ra0 inet YOUR_IP up
       
    #[kernel 2.6]
    #    $/sbin/insmod rt2870sta.ko
    #    $/sbin/ifconfig ra0 inet YOUR_IP up

7> unload driver   
    $/sbin/ifconfig ra0 down
$/sbin/rmmod rt2870sta

=======================================================================
CONFIGURATION: 
====================
RT2870 driver can be configured via following interfaces,
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file

i)  iwconfig comes with kernel. 
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)modify configuration file "RT2870STA.dat" in /etc/Wireless/RT2870STA/RT2870STA.dat.
           
Configuration File : RT2870STA.dat
---------------------------------------
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use "vi RT2870STA.dat" to modify settings according to your need.
#
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
#
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0

-----------------------------------------------
*NOTE:
WMM parameters
WmmCapable Set it as 1 to turn on WMM Qos support
AckPolicy1~4 Ack policy which support normal Ack or no Ack
(AC_BK, AC_BE, AC_VI, AC_VO)

All WMM parameters do not support iwpriv command but ĄĽWmmCapableĄŚĄŚ,
please store all parameter to RT2870STA.dat, and restart driver.

-----------------------------------------------
syntax is 'Param'='Value' and describes below.

@> CountryRegion=value                                 
value
0: use 1 ~ 11 Channel
1: use 1 ~ 13 Channel
2: use 10 ~ 11 Channel
3: use 10 ~ 13 Channel
4: use 14 Channel
5: use 1 ~ 14 Channel
6: use 3 ~ 9 Channel
7: use 5 ~ 13 Channel
   31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)
                                         
@> CountryRegionABand=value     
value
0: use 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 Channel
1: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Channel
2: use 36, 40, 44, 48, 52, 56, 60, 64 Channel
3: use 52, 56, 60, 64, 149, 153, 157, 161 Channel
4: use 149, 153, 157, 161, 165 Channel
5: use 149, 153, 157, 161 Channel
6: use 36, 40, 44, 48 Channel
7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel
8: use 52, 56, 60, 64 Channel
9: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 Channel
   10: use 36, 40, 44, 48, 149, 153, 157, 161, 165 Channel
   11: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 Channel

@> CountryCode=value
value
AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE,
GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, KR, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
"" => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165
                                                           
@> SSID=value               
value
0~z, 1~32 ascii characters.
                   
@> WirelessMode=value
value
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only         //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
3: legacy 11a/b/g mixed     //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
   10: 11AGN mixed
                     
@> Channel=value
value
depends on CountryRegion or CountryRegionABand
                   
@> BGProtection=value
value
0: Auto
1: Always on
2: Always off
                   
@> TxPreamble=value
  value
0:Preamble Long
1:Preamble Short
2:Auto
                   
@> RTSThreshold=value
value
1~2347                                                       
                                                           
@> FragThreshold=value
value       
256~2346
                   
@> TxBurst=value
value
0: Disable
1: Enable

@> NetworkType=value    
value
Infra: infrastructure mode
        Adhoc: adhoc mode
                                                                                                                                                                                                                 
@> AuthMode=value
value
OPEN For open system
SHARED   For shared key system
WEPAUTO     Auto switch between OPEN and SHARED
WPAPSK      For WPA pre-shared key  (Infra)
WPA2PSK     For WPA2 pre-shared key (Infra)
WPANONE For WPA pre-shared key  (Adhoc)
WPA         Use WPA-Supplicant
WPA2        Use WPA-Supplicant

@> EncrypType=value
value
NONE For AuthMode=OPEN                   
WEP For AuthMode=OPEN or AuthMode=SHARED
TKIP For AuthMode=WPAPSK or WPA2PSK                   
AES For AuthMode=WPAPSK or WPA2PSK                     

@> DefaultKeyID=value
value
1~4

@> Key1=value
    Key2=value
    Key3=value
    Key4=value
value
10 or 26 hexadecimal characters eg: 012345678
        5 or 13 ascii characters eg: passd
    (usage : "iwpriv" only)     

@> Key1Type=vaule
    Key2Type=value
    Key3Type=vaule
    Key4Type=vaule
    value
0   hexadecimal type
1   assic type
    (usage : reading profile only)

@> Key1Str=value
    Key2Str=value
    Key3Str=vaule
    Key4Str=vaule
    value
10 or 26 characters (key type=0)
5 or 13 characters  (key type=1)
    (usage : reading profile only)

@> WPAPSK=value             
value
8~63 ASCII  or
64 HEX characters
                   
@> WmmCapable=value
value
0: Disable WMM
1: Enable WMM
       
@> PSMode=value
    value
    CAM     Constantly Awake Mode
Max_PSP     Max Power Savings
Fast_PSP Power Save Mode

@> FastRoaming=value
value
0 Disabled
1 Enabled

@> RoamThreshold=value
value
Positive Interger(dBm)

@> HT_RDG=value
value
0 Disabled
1 Enabled

@> HT_EXTCHA=value (Extended Channel Switch Announcement)
value
0 Below
1 Above

@> HT_OpMode=value
value
0 HT mixed format
1 HT greenfield format

@> HT_MpduDensity=value
value (based on 802.11n D2.0)
0: no restriction
1: 1/4 Łgs
2: 1/2 Łgs
3: 1 Łgs
4: 2 Łgs
5: 4 Łgs
6: 8 Łgs
7: 16 Łgs

@> HT_BW=value
value
0 20MHz
1 40MHz

@> HT_AutoBA=value
value
0 Disabled
1 Enabled

@> HT_BADecline
value
0 Disabled
1     Enabled <Reject BA request from AP>

@> HT_AMSDU=value
value
0 Disabled
1 Enabled

@> HT_BAWinSize=value
value
1 ~ 64

@> HT_GI=value
value
0 long GI
1 short GI

@> HT_MCS=value
value
0 ~ 15
33: auto

@> HT_MIMOPSMode=value
value (based on 802.11n D2.0)
0 Static SM Power Save Mode
1 Dynamic SM Power Save Mode
2 Reserved
3 SM enabled
(not fully support yet)

@> EthConvertMode=value
value
dongle
clone
hybrid

@> EthCloneMac=value
value
xx:xx:xx:xx:xx:xx

@> IEEE80211H=value
value
0 Disabled
1 Enabled

@> TGnWifiTest=value
value
0 Disabled
1 Enabled

@> WirelessEvent=value
value
0 Disabled
1 Enabled <send custom wireless event>
   
@> MeshId=value
value
Length 1~32 ascii characters

@> MeshAutoLink=value
value
0 Disabled
1 Enabled

@> MeshAuthMode=value
value
OPEN For open system
WPANONE For WPA pre-shared key  (Adhoc)

@> MeshEncrypType=value
value
NONE For MeshAuthMode=OPEN                   
WEP For MeshAuthMode=OPEN
TKIP For MeshAuthMode=WPANONE
AES For MeshAuthMode=WPANONE

@> MeshWPAKEY=value
value
8~63 ASCII  or
64 HEX characters

@> MeshDefaultkey=value
value
1~4

@> MeshWEPKEY=value
value
10 or 26 characters
5 or 13 characters

@> CarrierDetect=value
value
0 Disabled
1 Enabled

MORE INFORMATION
=================================================================================
If you want for rt2870 driver to auto-load at boot time:
A) choose ra0 for first RT2870 WLAN card, ra1 for second RT2870 WLAN card, etc.
   
B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/,     
   edit( or add the line) in /etc/modules.conf:
       alias ra0 rt2870sta
   
C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0 
   DEVICE='ra0'
   ONBOOT='yes'     


NOTE:
   if you use dhcp, add this line too .
    BOOTPROTO='dhcp'

*D) To ease the Default Gateway setting,
    add the line
    GATEWAY=x.x.x.x   
    in /etc/sysconfig/network
   
=======================================================================
Dongle/Clone Features:
======================
A) Dongle mode:
    Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
    can transparently connect to the AP.

B) Clone mode:
Provides a 1-to-1 MAC address mapping mechanism.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
    use source MAC of first packet coming from wired device as SA MAC.
NOTE: In this mode, only the PC who own the specified MAC can connect to the AP.

 
C) Hybrid mode(Dongle+Clone):
Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
    can transparently connect to the AP.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
    use source MAC of first packet coming from wired device as SA MAC.

D) Please refer to "Config STA to link as dongle mode..." in iwpriv_usage.txt for releated commands.
A tady co je v souboru makefile:

Kód: [Vybrat]

RT28xx_MODE = STA
TARGET = LINUX

CHIPSET = 3070

#RT28xx_DIR = home directory of RT28xx source code
RT28xx_DIR = $(shell pwd)
RTMP_SRC_DIR = $(RT28xx_DIR)/RT$(CHIPSET)

#PLATFORM: Target platform
PLATFORM = PC
#PLATFORM = 5VT
#PLATFORM = IKANOS_V160
#PLATFORM = IKANOS_V180
#PLATFORM = SIGMA
#PLATFORM = SIGMA_8622
#PLATFORM = INIC
#PLATFORM = STAR
#PLATFORM = IXP
#PLATFORM = INF_TWINPASS
#PLATFORM = INF_DANUBE
#PLATFORM = BRCM_6358
#PLATFORM = INF_AMAZON_SE
#PLATFORM = CAVM_OCTEON
#PLATFORM = CMPC
#PLATFORM = RALINK_2880

ifeq ($(PLATFORM),5VT)
LINUX_SRC = /project/stable/5vt/ralink-2860-sdk/linux-2.6.17
CROSS_COMPILE = /opt/crosstool/uClibc_v5te_le_gcc_4_1_1/bin/arm-linux-
endif

ifeq ($(PLATFORM),IKANOS_V160)
LINUX_SRC = /home/sample/projects/LX_2618_RG_5_3_00r4_SRC/linux-2.6.18
CROSS_COMPILE = mips-linux-
endif

ifeq ($(PLATFORM),IKANOS_V180)
LINUX_SRC = /home/sample/projects/LX_BSP_VX180_5_4_0r1_ALPHA_26DEC07/linux-2.6.18
CROSS_COMPILE = mips-linux-
endif

ifeq ($(PLATFORM),SIGMA)
LINUX_SRC = /root/sigma/smp86xx_kernel_source_2.7.172.0/linux-2.6.15
CROSS_COMPILE = /root/sigma/smp86xx_toolchain_2.7.172.0/build_mipsel_nofpu/staging_dir/bin/mipsel-linux-
endif

ifeq ($(PLATFORM),SIGMA_8622)
LINUX_SRC = /home/snowpin/armutils_2.5.120.1/build_arm/linux-2.4.22-em86xx
CROSS_COMPILE = /home/snowpin/armutils_2.5.120.1/toolchain/bin/arm-elf-
CROSS_COMPILE_INCLUDE = /home/snowpin/armutils_2.5.120.1/toolchain/lib/gcc-lib/arm-elf/2.95.3
endif

ifeq ($(PLATFORM),INIC)
UCOS_SRC = /opt/uCOS/iNIC_rt2880
CROSS_COMPILE = /usr/bin/mipsel-linux-
endif

ifeq ($(PLATFORM),STAR)
LINUX_SRC = /opt/star/kernel/linux-2.4.27-star
CROSS_COMPILE = /opt/star/tools/arm-linux/bin/arm-linux-
endif

ifeq ($(PLATFORM), RALINK_2880)
LINUX_SRC = /project/stable/RT288x/RT288x_SDK/source/linux-2.4.x
CROSS_COMPILE = /opt/buildroot-gdb/bin/mipsel-linux-
endif

ifeq ($(PLATFORM),PC)
# Linux 2.6
LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
#LINUX_SRC = /usr/src/linux-2.4
LINUX_SRC_MODULE = /lib/modules/$(shell uname -r)/kernel/drivers/net/wireless/
CROSS_COMPILE =
endif

ifeq ($(PLATFORM),IXP)
LINUX_SRC = /project/stable/Gmtek/snapgear-uclibc/linux-2.6.x
CROSS_COMPILE = arm-linux-
endif

ifeq ($(PLATFORM),INF_TWINPASS)
# Linux 2.6
#LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
LINUX_SRC = /project/stable/twinpass/release/2.0.1/source/kernel/opensource/linux-2.4.31/
CROSS_COMPILE = mips-linux-
endif

ifeq ($(PLATFORM),INF_DANUBE)
LINUX_SRC = /opt/danube/sdk/linux-2.6.16.x
CROSS_COMPILE = mips-linux-
ROOTDIR = /opt/danube/sdk
export ROOTDIR
endif

ifeq ($(PLATFORM),BRCM_6358)
LINUX_SRC =
CROSS_COMPILE =
endif

ifeq ($(PLATFORM),INF_AMAZON_SE)
# Linux 2.6
#LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
LINUX_SRC = /backup/ifx/3.6.2.2/source/kernel/opensource/linux-2.4.31
#CROSS_COMPILE = mips-linux-
#LINUX_SRC = /project/Infineon/3.6.2.2/source/kernel/opensource/linux-2.4.31
CROSS_COMPILE = /opt/uclibc-toolchain/ifx-lxdb-1-2-3-external/gcc-3.3.6/toolchain-mips/R0208V35/mips-linux-uclibc/bin/
endif

ifeq ($(PLATFORM),ST)
LINUX_SRC = /opt/STM/STLinux-2.2/devkit/sources/kernel/linux0039
CROSS_COMPILE = /opt/STM/STLinux-2.2/devkit/sh4/bin/sh4-linux-
ARCH := sh
export ARCH
endif

ifeq ($(PLATFORM),CAVM_OCTEON)
OCTEON_ROOT = /usr/local/Cavium_Networks/OCTEON-SDK
LINUX_SRC = $(OCTEON_ROOT)/linux/kernel_2.6/linux
CROSS_COMPILE = mips64-octeon-linux-gnu-
endif

ifeq ($(PLATFORM),CMPC)
LINUX_SRC = /opt/fvt_11N_SDK_0807/fvt131x_SDK_11n/linux-2.6.17
CROSS_COMPILE =
endif

export RT28xx_DIR RT28xx_MODE LINUX_SRC CROSS_COMPILE CROSS_COMPILE_INCLUDE PLATFORM RELEASE CHIPSET RTMP_SRC_DIR LINUX_SRC_MODULE TARGET

all: build_tools $(TARGET)


build_tools:
make -C tools
$(RT28xx_DIR)/tools/bin2h

test:
make -C tools test

UCOS:
make -C os/ucos/ MODE=$(RT28xx_MODE)
echo $(RT28xx_MODE)


LINUX:
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
cp -f os/linux/Makefile.4 $(RT28xx_DIR)/os/linux/Makefile
make -C $(RT28xx_DIR)/os/linux/
cp -f $(RT28xx_DIR)/os/linux/rt$(CHIPSET)sta.o /tftpboot
else
cp -f os/linux/Makefile.6 $(RT28xx_DIR)/os/linux/Makefile
make  -C  $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
cp -f $(RT28xx_DIR)/os/linux/rt$(CHIPSET)sta.ko /tftpboot
endif

clean:
ifeq ($(TARGET), LINUX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
cp -f os/linux/Makefile.4 os/linux/Makefile
else
cp -f os/linux/Makefile.6 os/linux/Makefile
endif
make -C os/linux clean
rm -rf os/linux/Makefile
endif
ifeq ($(TARGET), UCOS)
make -C os/ucos clean MODE=$(RT28xx_MODE)
endif

uninstall:
ifeq ($(TARGET), LINUX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
make -C $(RT28xx_DIR)/os/linux -f Makefile.4 uninstall
else
make -C $(RT28xx_DIR)/os/linux -f Makefile.6 uninstall
endif
endif

install:
ifeq ($(TARGET), LINUX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
make -C $(RT28xx_DIR)/os/linux -f Makefile.4 install
else
make -C $(RT28xx_DIR)/os/linux -f Makefile.6 install
endif
endif

libwapi:
make -C $(RT28xx_DIR)/os/linux -f Makefile.libwapi

mám tento počítač: https://h10057.www1.hp.com/ecomcat/hpcatalog/specs/provisioner/05/VW075EA.htm

Děkuji za každou radu která mi flashku pomůže rozběhnout.

[petertomasy]

Otvor si terminál a napíš tam nasledovné :

Kód: [Vybrat]

sudo -s
echo "blacklist rt2800usb" >> /etc/modprobe.d/blacklist.conf #zapísať modul do čiernej listiny

apt-get install linux-backports-modules-compat-wireless-2.6.36-maverick-generic # nainstalovať backport
exit
sudo reboot
 a malo by to isť "out of box".

[capsle1]

Díky za pomoc, zadal jsem to tam a už se rozblikala. :-)
Ale chtělo by jí to asi nějak nastavit, snaží se připojit a nejde jí to.
Při načítání stránek mi vyskakuje pořád okno s přihlášením do sítě a stránky se nenačtou :-(

[Buddyman]

mě to dělala taky málo signálu, popřípadě šifrování, ale i špatné heslo
zkus to proběhnout

[capsle1]

Heslo je správný a signál taky. Zabezpečení mám nastaveno na wpa, wpa2 personal.

lsusb mi hází toto:

Kód: [Vybrat]

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0461:0010 Primax Electronics, Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0461:4d20 Primax Electronics, Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 148f:3070 Ralink Technology, Corp.
Bus 001 Device 006: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 004: ID 03f0:2504 Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
S tím že Ralink Technology, Corp. má být ta usb wifi. Nejsem odborník, ale nemělo by tam být spíš něco, co by se blíž podobalo názvu tý wifiny?

[petertomasy]

skus ešte pridať daľšie moduly na čiernu listinu

Kód: [Vybrat]

sudo gedit /etc/modprobe.d/blacklist.conf
                           #  a pridaj ešte tie to riadky
blacklist rt2x00usb  
blacklist rt2800lib
blacklist rt2x00lib   # a uložiť súbor
sudo reboot
   
 Tiež by som skusil by som najprv vypnúť šifrovanie, poprípade zmeniť kanál a pohrať sa ... teda ak máš prístupové práva k routeru.

Nejsem odborník, ale nemělo by tam být spíš něco, co by se blíž podobalo názvu tý wifiny?

Práve ten " ID 148f:3070 Ralink Technology, Corp. " je presný nazov chipu wifiny , a nie reklamné nazvy " usb getnet gn-531u " a pod. v pohode dva rôzne produkty môžu mať pod kapotou rovnaké železo, ale to je len reklamná taktika zblbnuť človeka , a neplatí to len pre IT  ...

[capsle1]

Bohužel přístup k routeru nemám :-(

Zapsal jsem vše do černé listiny ale stále se neumí připojit.

O víkendu to zkusím u kamaráda tak doufám že tam to půjde.

Díky za rady :-)