Problem s pripojenim externeho disku samsung NTFS

[p3dr0]

Zdravim vo spolok
Mam taky zvlastny problem nemozem pripojit na svoj server debian cez usb svoj externy disk Samsung ktory je naformatovany ako NTFS a ked som ho prvykrat pripojil tiez NTFS v pohode isiel vsetko nakopcil dal odpojit a teraz po tyzdni znova dam do usb a uz pise ze nemoze mount disk nechapem preco? ved som nic nemenil a ked to raz precitalo mi nejde do hlavy preco zrazu nie? viete mi niekto pls poradit preco za radu budem velmo vdacny..

[MacHala]

podivej se co po pripojeni disku vypise dmesg

tipl bych, ze to bude klasicky problem se spatnym odpojenim...

[p3dr0]

podivej se co po pripojeni disku vypise dmesg

tipl bych, ze to bude klasicky problem se spatnym odpojenim...

vypise mi

Kód: [Vybrat]

[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1200.064 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 961856k/982016k available (1772k kernel code, 17976k reserved, 749k data, 244k init, 62912k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
[    0.004000]       .data : 0xc02bb06d - 0xc0376620   ( 749 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02bb06d   (1772 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.084194] Calibrating delay using timer specific routine.. 2402.31 BogoMIPS (lpj=4804621)
[    0.084251] Security Framework initialized
[    0.084262] SELinux:  Disabled at boot.
[    0.084269] Capability LSM initialized
[    0.084291] Mount-cache hash table entries: 512
[    0.084543] Initializing cgroup subsys ns
[    0.084552] Initializing cgroup subsys cpuacct
[    0.084556] Initializing cgroup subsys devices
[    0.084589] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.084593] CPU: L2 cache: 512K
[    0.084602] Intel machine check architecture supported.
[    0.084608] Intel machine check reporting enabled on CPU#0.
[    0.084611] using mwait in idle threads.
[    0.084627] Checking 'hlt' instruction... OK.
[    0.100668] SMP alternatives: switching to UP code
[    0.108846] ACPI: Core revision 20080321
[    0.120007] ENABLING IO-APIC IRQs
[    0.120007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.159716] CPU0: Intel(R) Celeron(R) CPU          220  @ 1.20GHz stepping 01
[    0.160010] Brought up 1 CPUs
[    0.160010] Total of 1 processors activated (2402.31 BogoMIPS).
[    0.160010] CPU0 attaching sched-domain:
[    0.160010]  domain 0: span 0
[    0.160010]   groups: 0
[    0.160010] net_namespace: 660 bytes
[    0.160010] Booting paravirtualized kernel on bare hardware
[    0.160010] NET: Registered protocol family 16
[    0.160010] ACPI: bus type pci registered
[    0.160010] PCI: Using configuration type 1 for base access
[    0.160010] Setting up standard PCI resources
[    0.172165] ACPI: EC: Look up EC in DSDT
[    0.179740] ACPI: Interpreter enabled
[    0.179748] ACPI: (supports S0 S1 S4 S5)
[    0.179766] ACPI: Using IOAPIC for interrupt routing
[    0.187427] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.188510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.189070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.197169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.197320] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.197467] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.197617] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.197764] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.197909] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.198057] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.198213] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.198446] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.198498] pnp: PnP ACPI init
[    0.198510] ACPI: bus type pnp registered
[    0.201799] pnp: PnP ACPI: found 11 devices
[    0.201803] ACPI: ACPI bus type pnp unregistered
[    0.201809] PnPBIOS: Disabled by ACPI PNP
[    0.202193] PCI: Using ACPI for IRQ routing
[    0.202480] ACPI: RTC can wake from S4
[    0.202527] system 00:08: ioport range 0x800-0x8fe has been reserved
[    0.202531] system 00:08: ioport range 0x8ff-0x8ff has been reserved
[    0.202535] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.202539] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.202542] system 00:08: ioport range 0x295-0x29e has been reserved
[    0.202546] system 00:08: ioport range 0x2e8-0x2ef has been reserved
[    0.202550] system 00:08: ioport range 0x481-0x48f has been reserved
[    0.202560] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[    0.202564] system 00:09: iomem range 0xec000-0xfffff could not be reserved
[    0.202568] system 00:09: iomem range 0x100000-0x3bffffff could not be reserved
[    0.202574] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[    0.202578] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.202582] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.233174] PCI: Bridge: 0000:00:01.0
[    0.233179]   IO window: 1000-1fff
[    0.233186]   MEM window: 0x4a000000-0x4a0fffff
[    0.233192]   PREFETCH window: 0x0000000040000000-0x0000000047ffffff
[    0.233200] PCI: Bridge: 0000:00:1f.0
[    0.233202]   IO window: disabled.
[    0.233209]   MEM window: 0x3c000000-0x3c0fffff
[    0.233214]   PREFETCH window: disabled.
[    0.233232] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.233255] pci 0000:00:1f.0: enabling device (0000 -> 0002)
[    0.233264] PCI: Setting latency timer of device 0000:00:1f.0 to 64
[    0.233301] NET: Registered protocol family 2
[    0.233443] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.233764] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.234845] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.235477] TCP: Hash tables configured (established 131072 bind 65536)
[    0.235484] TCP reno registered
[    0.235741] NET: Registered protocol family 1
[    0.235915] checking if image is initramfs... it is
[    0.736054] Switched to high resolution mode on CPU 0
[    1.021458] Freeing initrd memory: 6073k freed
[    1.022541] audit: initializing netlink socket (disabled)
[    1.022572] type=2000 audit(1298486976.020:1): initialized
[    1.022784] highmem bounce pool size: 64 pages
[    1.022793] Total HugeTLB memory allocated, 0
[    1.022899] VFS: Disk quotas dquot_6.5.1
[    1.022933] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.022984] msgmni has been set to 1767
[    1.023142] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.023146] io scheduler noop registered
[    1.023149] io scheduler anticipatory registered
[    1.023152] io scheduler deadline registered
[    1.023168] io scheduler cfq registered (default)
[    1.023208] pci 0000:01:00.0: Boot video device
[    1.023355] PCI: Setting latency timer of device 0000:00:1f.0 to 64
[    1.023401] assign_interrupt_mode Found MSI capability
[    1.023455] Allocate Port Service[0000:00:1f.0:pcie00]
[    1.023909] isapnp: Scanning for PnP cards...
[    1.377833] isapnp: No Plug & Play device found
[    1.381486] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.381637] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.382350] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.384928] brd: module loaded
[    1.385074] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.387766] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.387774] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.387984] mice: PS/2 mouse device common for all mice
[    1.388204] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.388225] rtc0: alarms up to one month
[    1.388277] cpuidle: using governor ladder
[    1.388280] cpuidle: using governor menu
[    1.388288] No iBFT detected.
[    1.388828] TCP cubic registered
[    1.388832] NET: Registered protocol family 17
[    1.388841] Using IPI No-Shortcut mode
[    1.389022] registered taskstats version 1
[    1.389192] rtc_cmos 00:02: setting system clock to 2011-02-23 18:49:36 UTC (1298486976)
[    1.389324] Freeing unused kernel memory: 244k freed
[    1.520690] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.520699] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.243626] No dock devices found.
[    2.302224] SCSI subsystem initialized
[    2.355771] usbcore: registered new interface driver usbfs
[    2.355813] usbcore: registered new interface driver hub
[    2.355857] usbcore: registered new device driver usb
[    2.357415] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.357448] ohci_hcd 0000:00:03.0: enabling device (0100 -> 0102)
[    2.357460] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[    2.357480] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    2.357643] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[    2.357670] ohci_hcd 0000:00:03.0: irq 20, io mem 0x4a104000
[    2.357731] libata version 3.00 loaded.
[    2.368162] sis900.c: v1.08.10 Apr. 2 2006
[    2.414141] usb usb1: configuration #1 chosen from 1 choice
[    2.414180] hub 1-0:1.0: USB hub found
[    2.414192] hub 1-0:1.0: 3 ports detected
[    2.516191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.516197] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.516201] usb usb1: Product: OHCI Host Controller
[    2.516204] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[    2.516207] usb usb1: SerialNumber: 0000:00:03.0
[    2.516262] ohci_hcd 0000:00:03.1: enabling device (0100 -> 0102)
[    2.516274] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
[    2.516297] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    2.516331] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[    2.516355] ohci_hcd 0000:00:03.1: irq 21, io mem 0x4a103000
[    2.574127] usb usb2: configuration #1 chosen from 1 choice
[    2.574167] hub 2-0:1.0: USB hub found
[    2.574179] hub 2-0:1.0: 3 ports detected
[    2.676138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.676143] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.676147] usb usb2: Product: OHCI Host Controller
[    2.676149] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[    2.676152] usb usb2: SerialNumber: 0000:00:03.1
[    2.676201] ohci_hcd 0000:00:03.2: enabling device (0100 -> 0102)
[    2.676212] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
[    2.676234] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    2.676273] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[    2.676296] ohci_hcd 0000:00:03.2: irq 22, io mem 0x4a102000
[    2.734110] usb usb3: configuration #1 chosen from 1 choice
[    2.734150] hub 3-0:1.0: USB hub found
[    2.734161] hub 3-0:1.0: 2 ports detected
[    2.836133] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.836138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.836141] usb usb3: Product: OHCI Host Controller
[    2.836144] usb usb3: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[    2.836147] usb usb3: SerialNumber: 0000:00:03.2
[    2.836321] ehci_hcd 0000:00:03.3: enabling device (0100 -> 0102)
[    2.836331] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[    2.836350] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    2.836387] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[    2.836451] ehci_hcd 0000:00:03.3: irq 23, io mem 0x4a101000
[    2.848067] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.848195] usb usb4: configuration #1 chosen from 1 choice
[    2.848235] hub 4-0:1.0: USB hub found
[    2.848245] hub 4-0:1.0: 8 ports detected
[    2.952183] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.952189] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.952193] usb usb4: Product: EHCI Host Controller
[    2.952195] usb usb4: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[    2.952198] usb usb4: SerialNumber: 0000:00:03.3
[    2.952260] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
[    2.953660] 0000:00:04.0: SiS 900 on Foxconn 661 7MI transceiver found at address 1.
[    2.965005] 0000:00:04.0: Using transceiver found at address 1 as default
[    2.966039] eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 19, 00:1c:c0:07:9c:89
[    2.977764] Uniform Multi-Platform E-IDE driver
[    2.977772] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    2.978515] sata_sis 0000:00:05.0: version 1.0
[    2.978551] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[    2.978560] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[    2.979366] scsi0 : sata_sis
[    2.979490] scsi1 : sata_sis
[    2.979541] ata1: SATA max UDMA/133 cmd 0x2328 ctl 0x2334 bmdma 0x2300 irq 17
[    2.979547] ata2: SATA max UDMA/133 cmd 0x2320 ctl 0x2330 bmdma 0x2308 irq 17
[    3.204012] usb 4-6: new high speed USB device using ehci_hcd and address 2
[    3.344938] usb 4-6: configuration #1 chosen from 1 choice
[    3.345752] usb 4-6: New USB device found, idVendor=04e8, idProduct=1f05
[    3.345758] usb 4-6: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[    3.345762] usb 4-6: Product: Samsung S2 Portable
[    3.345764] usb 4-6: Manufacturer: JMicron
[    3.345767] usb 4-6: SerialNumber: 0000002CE1451
[    3.380264] Initializing USB Mass Storage driver...
[    3.381837] scsi2 : SCSI emulation for USB Mass Storage devices
[    3.381961] usbcore: registered new interface driver usb-storage
[    3.381967] USB Mass Storage support registered.
[    3.384658] usb-storage: device found at 2
[    3.384663] usb-storage: waiting for device to settle before scanning
[    3.464057] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.472450] ata1.00: ATA-7: HTS721010G9SA00, MCZIC17V, max UDMA/100
[    3.472454] ata1.00: 195371568 sectors, multi 16: LBA48
[    3.488451] ata1.00: configured for UDMA/100
[    3.808056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.864524] ata2.00: HPA detected: current 3907029168, native 18446744073321613488
[    3.864530] ata2.00: ATA-8: WDC WD20EVDS-63T3B0, 01.00A01, max UDMA/133
[    3.864534] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.872371] ata2.00: configured for UDMA/133
[    3.872522] scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZI PQ: 0 ANSI: 5
[    3.872746] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EVDS-63T 01.0 PQ: 0 ANSI: 5
[    3.877870] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[    3.877877] SIS5513: IDE controller (0x1039:0x5513 rev 0x01) at  PCI slot 0000:00:02.5
[    3.877888] SIS5513: not 100% native mode: will probe irqs later
[    3.877904]     ide0: BM-DMA at 0x2310-0x2317
[    3.877914]     ide1: BM-DMA at 0x2318-0x231f
[    3.877920] Probing IDE interface ide0...
[    3.924782] Driver 'sd' needs updating - please use bus_type methods
[    3.924918] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[    3.924943] sd 0:0:0:0: [sda] Write Protect is off
[    3.924947] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.924982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.925063] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[    3.925085] sd 0:0:0:0: [sda] Write Protect is off
[    3.925089] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.925123] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.925131]  sda: sda1 sda2 < sda5 sda6 >
[    4.276927] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.277031] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
[    4.277053] sd 1:0:0:0: [sdb] Write Protect is off
[    4.277057] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.277091] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.277170] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
[    4.277191] sd 1:0:0:0: [sdb] Write Protect is off
[    4.277196] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.277229] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.277235]  sdb: sdb1
[    4.282457] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.444078] Probing IDE interface ide1...
[    5.012085] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.012136] ide1 at 0x170-0x177,0x376 on irq 15
[    5.097943] PM: Starting manual resume from disk
[    5.139081] kjournald starting.  Commit interval 5 seconds
[    5.139081] EXT3-fs: mounted filesystem with ordered data mode.
[    6.724141] udevd version 125 started
[    8.111045] Linux agpgart interface v0.103
[    8.116805] agpgart: Detected SiS chipset - id:1634
[    8.119172] agpgart: AGP aperture is 32M @ 0x48000000
[    8.186845] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.242228] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.385440] usb-storage: device scan complete
[    8.427498] scsi 2:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[    8.428696] sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[    8.429575] sd 2:0:0:0: [sdc] Write Protect is off
[    8.429580] sd 2:0:0:0: [sdc] Mode Sense: 28 00 00 00
[    8.429584] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    8.430704] sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[    8.431573] sd 2:0:0:0: [sdc] Write Protect is off
[    8.431578] sd 2:0:0:0: [sdc] Mode Sense: 28 00 00 00
[    8.431581] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    8.431632]  sdc: sdc1
[    8.432347] sd 2:0:0:0: [sdc] Attached SCSI disk
[    8.484513] input: Power Button (FF) as /class/input/input0
[    8.499279] ACPI: Power Button (FF) [PWRF]
[    8.499422] input: Power Button (CM) as /class/input/input1
[    8.514427] ACPI: Power Button (CM) [PWRB]
[    9.858612] input: PC Speaker as /class/input/input2
[    9.925676] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[   10.069695] parport_pc 00:07: reported by Plug and Play ACPI
[   10.069751] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   10.348030] intel8x0_measure_ac97_clock: measured 52629 usecs
[   10.348035] intel8x0: clocking to 48000
[   11.524443] Adding 1958000k swap on /dev/sda5.  Priority:-1 extents:1 across:1958000k
[   11.881457] EXT3 FS on sda1, internal journal
[   12.156006] loop: module loaded
[   12.237157] w83627ehf: Found W83627DHG chip at 0x290
[   12.266435] coretemp coretemp.0: Using relative temperature scale!
[   12.728661] kjournald starting.  Commit interval 5 seconds
[   12.735325] EXT3 FS on sda6, internal journal
[   12.735333] EXT3-fs: mounted filesystem with ordered data mode.
[   12.792012] kjournald starting.  Commit interval 5 seconds
[   12.792012] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   12.800825] EXT3 FS on sdb1, internal journal
[   12.800834] EXT3-fs: mounted filesystem with ordered data mode.
[   14.365979] NET: Registered protocol family 10
[   14.366582] lo: Disabled Privacy Extensions
[   15.876751] eth0: Media Link On 100mbps full-duplex
[   19.892003] lp0: using parport0 (interrupt-driven).
[   19.936774] ppdev: user-space parallel port driver
[   21.882539] RPC: Registered udp transport module.
[   21.882545] RPC: Registered tcp transport module.
[   21.964932] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   22.021117] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   22.041353] NFSD: starting 90-second grace period
[   25.100025] eth0: no IPv6 routers present
[   25.420007] NET: Registered protocol family 5
[   39.333923] fuse init (API version 7.9)
[  105.139804] usb 4-6: USB disconnect, address 2
[  121.036040] usb 4-6: new high speed USB device using ehci_hcd and address 3
[  121.169310] usb 4-6: configuration #1 chosen from 1 choice
[  121.170275] scsi3 : SCSI emulation for USB Mass Storage devices
[  121.170627] usb-storage: device found at 3
[  121.170631] usb-storage: waiting for device to settle before scanning
[  121.172933] usb 4-6: New USB device found, idVendor=04e8, idProduct=1f05
[  121.172939] usb 4-6: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[  121.172943] usb 4-6: Product: Samsung S2 Portable
[  121.172945] usb 4-6: Manufacturer: JMicron
[  121.172948] usb 4-6: SerialNumber: 0000002CE1451
[  126.168351] usb-storage: device scan complete
[  126.214359] scsi 3:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[  126.221304] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[  126.229832] sd 3:0:0:0: [sdc] Write Protect is off
[  126.229838] sd 3:0:0:0: [sdc] Mode Sense: 28 00 00 00
[  126.229842] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[  126.231058] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[  126.231942] sd 3:0:0:0: [sdc] Write Protect is off
[  126.231947] sd 3:0:0:0: [sdc] Mode Sense: 28 00 00 00
[  126.231951] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[  126.231957]  sdc: sdc1
[  126.252896] sd 3:0:0:0: [sdc] Attached SCSI disk
[  146.316092] usb 4-6: USB disconnect, address 3
[  153.200035] usb 4-5: new high speed USB device using ehci_hcd and address 4
[  153.333033] usb 4-5: configuration #1 chosen from 1 choice
[  153.337844] scsi4 : SCSI emulation for USB Mass Storage devices
[  153.337940] usb-storage: device found at 4
[  153.337943] usb-storage: waiting for device to settle before scanning
[  153.338609] usb 4-5: New USB device found, idVendor=04e8, idProduct=1f05
[  153.338614] usb 4-5: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[  153.338618] usb 4-5: Product: Samsung S2 Portable
[  153.338621] usb 4-5: Manufacturer: JMicron
[  153.338624] usb 4-5: SerialNumber: 0000002CE1451
[  158.336351] usb-storage: device scan complete
[  158.376007] scsi 4:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[  158.394560] sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[  158.395414] sd 4:0:0:0: [sdc] Write Protect is off
[  158.395419] sd 4:0:0:0: [sdc] Mode Sense: 28 00 00 00
[  158.395423] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[  158.396554] sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[  158.397411] sd 4:0:0:0: [sdc] Write Protect is off
[  158.397416] sd 4:0:0:0: [sdc] Mode Sense: 28 00 00 00
[  158.397419] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[  158.397428]  sdc: sdc1
[  158.427140] sd 4:0:0:0: [sdc] Attached SCSI disk
[  163.145671] usb 4-5: USB disconnect, address 4
[  196.760034] usb 4-5: new high speed USB device using ehci_hcd and address 5
[  196.909073] usb 4-5: configuration #1 chosen from 1 choice
[  196.912412] scsi5 : SCSI emulation for USB Mass Storage devices
[  196.912504] usb-storage: device found at 5
[  196.912507] usb-storage: waiting for device to settle before scanning
[  196.915479] usb 4-5: New USB device found, idVendor=04e8, idProduct=1f05
[  196.915484] usb 4-5: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[  196.915488] usb 4-5: Product: Samsung S2 Portable
[  196.915491] usb 4-5: Manufacturer: JMicron
[  196.915493] usb 4-5: SerialNumber: 0000002CE1451
[  201.912229] usb-storage: device scan complete
[  201.928008] scsi 5:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[  201.957232] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[  201.958097] sd 5:0:0:0: [sdc] Write Protect is off
[  201.958104] sd 5:0:0:0: [sdc] Mode Sense: 28 00 00 00
[  201.958108] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[  201.959213] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[  201.960069] sd 5:0:0:0: [sdc] Write Protect is off
[  201.960075] sd 5:0:0:0: [sdc] Mode Sense: 28 00 00 00
[  201.960078] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[  201.960087]  sdc: sdc1
[  201.989691] sd 5:0:0:0: [sdc] Attached SCSI disk
[  221.056866] usb 4-5: USB disconnect, address 5
[  265.148036] usb 4-6: new high speed USB device using ehci_hcd and address 6
[  265.289082] usb 4-6: configuration #1 chosen from 1 choice
[  265.293519] scsi6 : SCSI emulation for USB Mass Storage devices
[  265.293613] usb-storage: device found at 6
[  265.293616] usb-storage: waiting for device to settle before scanning
[  265.294302] usb 4-6: New USB device found, idVendor=04e8, idProduct=1f05
[  265.294307] usb 4-6: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[  265.294311] usb 4-6: Product: Samsung S2 Portable
[  265.294314] usb 4-6: Manufacturer: JMicron
[  265.294316] usb 4-6: SerialNumber: 0000002CE1451
[  270.292242] usb-storage: device scan complete
[  270.308017] scsi 6:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[  270.345242] sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[  270.346097] sd 6:0:0:0: [sdc] Write Protect is off
[  270.346102] sd 6:0:0:0: [sdc] Mode Sense: 28 00 00 00
[  270.346105] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  270.347215] sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[  270.348041] sd 6:0:0:0: [sdc] Write Protect is off
[  270.348045] sd 6:0:0:0: [sdc] Mode Sense: 28 00 00 00
[  270.348049] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  270.348058]  sdc: sdc1
[  270.377691] sd 6:0:0:0: [sdc] Attached SCSI disk
[  563.549271] NTFS driver 2.1.29 [Flags: R/W MODULE].
[  870.596542] usb 4-6: USB disconnect, address 6
[ 4968.360030] usb 4-6: new high speed USB device using ehci_hcd and address 7
[ 4968.500994] usb 4-6: configuration #1 chosen from 1 choice
[ 4968.505390] scsi7 : SCSI emulation for USB Mass Storage devices
[ 4968.505479] usb-storage: device found at 7
[ 4968.505482] usb-storage: waiting for device to settle before scanning
[ 4968.509055] usb 4-6: New USB device found, idVendor=04e8, idProduct=1f05
[ 4968.509066] usb 4-6: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[ 4968.509070] usb 4-6: Product: Samsung S2 Portable
[ 4968.509073] usb 4-6: Manufacturer: JMicron
[ 4968.509076] usb 4-6: SerialNumber: 0000002CE1451
[ 4973.504273] usb-storage: device scan complete
[ 4973.516009] scsi 7:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[ 4973.557216] sd 7:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[ 4973.557994] sd 7:0:0:0: [sdc] Write Protect is off
[ 4973.558000] sd 7:0:0:0: [sdc] Mode Sense: 28 00 00 00
[ 4973.558003] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4973.559116] sd 7:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[ 4973.559992] sd 7:0:0:0: [sdc] Write Protect is off
[ 4973.559996] sd 7:0:0:0: [sdc] Mode Sense: 28 00 00 00
[ 4973.559999] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4973.560022]  sdc: sdc1
[ 4973.586191] sd 7:0:0:0: [sdc] Attached SCSI disk

[p3dr0]

a tiez si myslim ze to bude nieco s tym..  pls vedel by si mi s tym pomoct?

[daysleeper]

bohuzel ve vypise dmesg se pripojeni (mount) ntfs oddilu neukaze, mozna spis /var/log/syslog

zkus ale po (fyzickem) pripojeni externiho disku

Kód: [Vybrat]

sudo mount -t ntfs /dev/sdc1 /mnt
dava nejakou chybu?

[p3dr0]

bohuzel ve vypise dmesg se pripojeni (mount) ntfs oddilu neukaze, mozna spis /var/log/syslog

zkus ale po (fyzickem) pripojeni externiho disku

Kód: [Vybrat]

sudo mount -t ntfs /dev/sdc1 /mnt
dava nejakou chybu?

no tak hodil som ten prikaz do terminalu a vyhodilo mi to najprv prazdny dokument kd mi ukazalo velkost toho disku ale tot vse a pak uz ked davam znova ten prikaz vyhadzuje to
mount: /dev/sdc1 already mounted or /mnt busy
mount: according to mtab, /dev/sdc1 is already mounted on /mnt
a pls ten  /var/log/syslog   to je cely prikaz to mi neberie??

[alkoholik]

/var/log/syslog je textový soubor, použij textový editor.
např: 
$ gedit /var/log/syslog

[p3dr0]

/var/log/syslog je textový soubor, použij textový editor.
např:  
$ gedit /var/log/syslog

 no otvori mi to presne editor textovy tu je vystup

Kód: [Vybrat]

Feb 24 07:55:36 serverik kernel: imklog 3.18.6, log source = /proc/kmsg started.
Feb 24 07:55:36 serverik rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="2054" x-info="http://www.rsyslog.com"] restart
Feb 24 07:56:20 serverik anacron[4003]: Job `cron.daily' terminated
Feb 24 07:56:20 serverik anacron[4003]: Normal exit (1 job run)
Feb 24 08:09:01 serverik /USR/SBIN/CRON[4180]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 08:17:01 serverik /USR/SBIN/CRON[4190]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 08:20:01 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:10::1#53
Feb 24 08:39:01 serverik /USR/SBIN/CRON[4204]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 09:09:01 serverik /USR/SBIN/CRON[4227]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 09:17:01 serverik /USR/SBIN/CRON[4239]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 09:24:44 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:678:11::1#53
Feb 24 09:24:44 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:f::1#53
Feb 24 09:24:44 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/A/IN': 2a00:d40:1:1::5#53
Feb 24 09:39:01 serverik /USR/SBIN/CRON[4254]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 10:09:01 serverik /USR/SBIN/CRON[4271]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 10:17:01 serverik /USR/SBIN/CRON[4282]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 10:29:27 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:f::1#53
Feb 24 10:29:27 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:10::1#53
Feb 24 10:29:27 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/AAAA/IN': 2001:678:4::16#53
Feb 24 10:29:27 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/AAAA/IN': 2001:760:ffff:ffff::ca#53
Feb 24 10:39:01 serverik /USR/SBIN/CRON[4296]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 11:09:01 serverik /USR/SBIN/CRON[4314]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 11:17:01 serverik /USR/SBIN/CRON[4325]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 11:31:44 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:678:1::1#53
Feb 24 11:39:01 serverik /USR/SBIN/CRON[4338]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 12:09:01 serverik /USR/SBIN/CRON[4358]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 12:17:01 serverik /USR/SBIN/CRON[4369]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 12:33:06 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:678:11::1#53
Feb 24 12:33:06 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:11::1#53
Feb 24 12:33:06 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/A/IN': 2a00:d40:1:1::5#53
Feb 24 12:33:06 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/AAAA/IN': 2001:678:4::16#53
Feb 24 12:39:01 serverik /USR/SBIN/CRON[4382]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 13:09:01 serverik /USR/SBIN/CRON[4400]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 13:17:01 serverik /USR/SBIN/CRON[4410]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 13:36:11 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/AAAA/IN': 2001:678:4::16#53
Feb 24 13:39:01 serverik /USR/SBIN/CRON[4424]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 14:09:01 serverik /USR/SBIN/CRON[4442]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 14:17:01 serverik /USR/SBIN/CRON[4455]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 14:37:33 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:f::1#53
Feb 24 14:37:33 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/AAAA/IN': 2001:760:ffff:ffff::ca#53
Feb 24 14:37:33 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:10::1#53
Feb 24 14:39:01 serverik /USR/SBIN/CRON[4473]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 14:45:51 serverik kernel: [68176.748025] usb 4-6: new high speed USB device using ehci_hcd and address 8
Feb 24 14:45:51 serverik kernel: [68176.889046] usb 4-6: configuration #1 chosen from 1 choice
Feb 24 14:45:51 serverik kernel: [68176.889977] scsi8 : SCSI emulation for USB Mass Storage devices
Feb 24 14:45:51 serverik kernel: [68176.890064] usb-storage: device found at 8
Feb 24 14:45:51 serverik kernel: [68176.890067] usb-storage: waiting for device to settle before scanning
Feb 24 14:45:51 serverik kernel: [68176.890730] usb 4-6: New USB device found, idVendor=04e8, idProduct=1f05
Feb 24 14:45:51 serverik kernel: [68176.890736] usb 4-6: New USB device strings: Mfr=1, Product=11, SerialNumber=3
Feb 24 14:45:51 serverik kernel: [68176.890740] usb 4-6: Product: Samsung S2 Portable
Feb 24 14:45:51 serverik kernel: [68176.890743] usb 4-6: Manufacturer: JMicron
Feb 24 14:45:51 serverik kernel: [68176.890746] usb 4-6: SerialNumber: 0000002CE1451
Feb 24 14:45:52 serverik NetworkManager: <debug> [1298555152.029537] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451').
Feb 24 14:45:52 serverik NetworkManager: <debug> [1298555152.452231] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0').
Feb 24 14:45:52 serverik NetworkManager: <debug> [1298555152.514085] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_usbraw').
Feb 24 14:45:56 serverik kernel: [68181.888327] usb-storage: device scan complete
Feb 24 14:45:56 serverik kernel: [68181.920008] scsi 8:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
Feb 24 14:45:56 serverik kernel: [68181.941821] sd 8:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
Feb 24 14:45:56 serverik kernel: [68181.942673] sd 8:0:0:0: [sdc] Write Protect is off
Feb 24 14:45:56 serverik kernel: [68181.942678] sd 8:0:0:0: [sdc] Mode Sense: 28 00 00 00
Feb 24 14:45:56 serverik kernel: [68181.942682] sd 8:0:0:0: [sdc] Assuming drive cache: write through
Feb 24 14:45:56 serverik kernel: [68181.943803] sd 8:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
Feb 24 14:45:56 serverik kernel: [68181.946370] sd 8:0:0:0: [sdc] Write Protect is off
Feb 24 14:45:56 serverik kernel: [68181.946377] sd 8:0:0:0: [sdc] Mode Sense: 28 00 00 00
Feb 24 14:45:56 serverik kernel: [68181.946380] sd 8:0:0:0: [sdc] Assuming drive cache: write through
Feb 24 14:45:57 serverik kernel: [68181.946387]  sdc: sdc1
Feb 24 14:45:57 serverik kernel: [68181.976733] sd 8:0:0:0: [sdc] Attached SCSI disk
Feb 24 14:45:57 serverik NetworkManager: <debug> [1298555157.067780] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host').
Feb 24 14:45:57 serverik NetworkManager: <debug> [1298555157.079864] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host_scsi_device_lun0').
Feb 24 14:45:57 serverik NetworkManager: <debug> [1298555157.368818] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Samsung_S2_Portable_0000002CE1451_0_0').
Feb 24 14:45:57 serverik NetworkManager: <debug> [1298555157.426331] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_72F2AB12F2AAD99D').
Feb 24 14:46:02 serverik named[2105]: network unreachable resolving 'blackhole-2.iana.org/AAAA/IN': 2001:500:89::53#53
Feb 24 14:46:02 serverik named[2105]: network unreachable resolving 'a.iana-servers.net/AAAA/IN': 2001:500:8c::53#53
Feb 24 14:46:02 serverik named[2105]: network unreachable resolving 'a.iana-servers.net/AAAA/IN': 2001:648:2c30::1:10#53
Feb 24 14:46:02 serverik named[2105]: client 192.168.44.10#52582: RFC 1918 response from Internet for 170.44.168.192.in-addr.arpa
Feb 24 14:48:26 serverik kernel: [68331.251383] NTFS volume version 3.1.
Feb 24 14:48:26 serverik kernel: [68331.253484] NTFS-fs error (device sdc1): load_system_files(): $LogFile is not clean.  Mounting read-only.  Mount in Windows.
Feb 24 15:09:01 serverik /USR/SBIN/CRON[4636]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 15:17:01 serverik /USR/SBIN/CRON[4651]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving '10.43.229.109.in-addr.arpa/PTR/IN': 2001:6b0:7::2#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns3.nic.fr/AAAA/IN': 2001:503:c27::2:30#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'tinnie.arin.net/AAAA/IN': 2001:503:231d::2:30#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns3.nic.fr/AAAA/IN': 2001:503:ba3e::2:30#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns3.nic.fr/AAAA/IN': 2001:dc3::35#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns2.lacnic.net/AAAA/IN': 2001:13c7:7002:3000::11#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns2.dns.br/A/IN': 2001:500:2f::f#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'sns-pb.isc.org/A/IN': 2001:500:40::1#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'sns-pb.isc.org/AAAA/IN': 2001:500:c::1#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'sns-pb.isc.org/AAAA/IN': 2001:500:e::1#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'sns-pb.isc.org/AAAA/IN': 2001:500:40::1#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'sec3.apnic.net/A/IN': 2001:dc0:1:0:4777::131#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns5.apnic.com/AAAA/IN': 2001:503:a83e::2:30#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns3.nic.fr/A/IN': 2001:500:2e::2#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'sec3.apnic.net/AAAA/IN': 2001:dc0:2001:0:4608::25#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns-pri.ripe.net/AAAA/IN': 2001:67c:e0::5#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns2.dns.br/A/IN': 2001:12ff::10#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns.isc.afilias-nst.info/A/IN': 2001:500:41::1#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'sns-pb.isc.org/AAAA/IN': 2001:500:60::30#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'sns-pb.isc.org/AAAA/IN': 2001:500:71::30#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns4.apnic.com/AAAA/IN': 2001:dc0:2001:a:4608::59#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns.isc.afilias-nst.info/A/IN': 2001:500:8::79#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns.isc.afilias-nst.info/A/IN': 2001:500:a::79#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns.isc.afilias-nst.info/A/IN': 2001:500:6::79#53
Feb 24 15:21:57 serverik named[2105]: network unreachable resolving 'ns.isc.afilias-nst.info/A/IN': 2001:500:7::79#53
Feb 24 15:21:58 serverik named[2105]: network unreachable resolving 'tinnie.arin.net/AAAA/IN': 2001:500:13::108#53
Feb 24 15:21:58 serverik named[2105]: network unreachable resolving 'ns3.nic.fr/AAAA/IN': 2001:660:3003:2::4:1#53
Feb 24 15:39:02 serverik /USR/SBIN/CRON[4668]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 15:41:33 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:678:f::1#53
Feb 24 15:41:33 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/A/IN': 2001:760:ffff:ffff::ca#53
Feb 24 15:59:59 serverik kernel: [72624.219370] usb 4-6: USB disconnect, address 8
Feb 24 15:59:59 serverik NetworkManager: <debug> [1298559599.301048] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Samsung_S2_Portable_0000002CE1451_0_0').
Feb 24 15:59:59 serverik NetworkManager: <debug> [1298559599.304422] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host_scsi_device_lun0').
Feb 24 15:59:59 serverik NetworkManager: <debug> [1298559599.308242] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host').
Feb 24 15:59:59 serverik NetworkManager: <debug> [1298559599.314984] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0').
Feb 24 15:59:59 serverik NetworkManager: <debug> [1298559599.438771] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_72F2AB12F2AAD99D').
Feb 24 15:59:59 serverik NetworkManager: <debug> [1298559599.446848] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_usbraw').
Feb 24 15:59:59 serverik NetworkManager: <debug> [1298559599.451193] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451').
Feb 24 16:00:05 serverik kernel: [72630.612085] usb 4-6: new high speed USB device using ehci_hcd and address 9
Feb 24 16:00:05 serverik kernel: [72630.752941] usb 4-6: configuration #1 chosen from 1 choice
Feb 24 16:00:05 serverik kernel: [72630.760050] scsi9 : SCSI emulation for USB Mass Storage devices
Feb 24 16:00:05 serverik kernel: [72630.760152] usb-storage: device found at 9
Feb 24 16:00:05 serverik kernel: [72630.760155] usb-storage: waiting for device to settle before scanning
Feb 24 16:00:05 serverik kernel: [72630.760818] usb 4-6: New USB device found, idVendor=04e8, idProduct=1f05
Feb 24 16:00:05 serverik kernel: [72630.760824] usb 4-6: New USB device strings: Mfr=1, Product=11, SerialNumber=3
Feb 24 16:00:05 serverik kernel: [72630.760827] usb 4-6: Product: Samsung S2 Portable
Feb 24 16:00:05 serverik kernel: [72630.760830] usb 4-6: Manufacturer: JMicron
Feb 24 16:00:05 serverik kernel: [72630.760833] usb 4-6: SerialNumber: 0000002CE1451
Feb 24 16:00:05 serverik NetworkManager: <debug> [1298559605.885645] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451').
Feb 24 16:00:06 serverik NetworkManager: <debug> [1298559606.256653] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0').
Feb 24 16:00:06 serverik NetworkManager: <debug> [1298559606.311644] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_usbraw').
Feb 24 16:00:10 serverik kernel: [72635.760228] usb-storage: device scan complete
Feb 24 16:00:10 serverik kernel: [72635.802051] scsi 9:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
Feb 24 16:00:10 serverik kernel: [72635.811680] sd 9:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
Feb 24 16:00:10 serverik kernel: [72635.818224] sd 9:0:0:0: [sdd] Write Protect is off
Feb 24 16:00:10 serverik kernel: [72635.818230] sd 9:0:0:0: [sdd] Mode Sense: 28 00 00 00
Feb 24 16:00:10 serverik kernel: [72635.818234] sd 9:0:0:0: [sdd] Assuming drive cache: write through
Feb 24 16:00:10 serverik kernel: [72635.819327] sd 9:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
Feb 24 16:00:10 serverik kernel: [72635.820330] sd 9:0:0:0: [sdd] Write Protect is off
Feb 24 16:00:10 serverik kernel: [72635.820336] sd 9:0:0:0: [sdd] Mode Sense: 28 00 00 00
Feb 24 16:00:10 serverik kernel: [72635.820339] sd 9:0:0:0: [sdd] Assuming drive cache: write through
Feb 24 16:00:10 serverik kernel: [72635.820350]  sdd: sdd1
Feb 24 16:00:10 serverik kernel: [72635.841162] sd 9:0:0:0: [sdd] Attached SCSI disk
Feb 24 16:00:10 serverik NetworkManager: <debug> [1298559610.941499] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host').
Feb 24 16:00:10 serverik NetworkManager: <debug> [1298559610.952533] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host_scsi_device_lun0').
Feb 24 16:00:11 serverik NetworkManager: <debug> [1298559611.190555] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Samsung_S2_Portable_0000002CE1451_0_0').
Feb 24 16:00:11 serverik NetworkManager: <debug> [1298559611.234953] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_72F2AB12F2AAD99D').
Feb 24 16:00:15 serverik named[2105]: network unreachable resolving 'blackhole-1.iana.org/A/IN': 2001:500:89::53#53
Feb 24 16:00:15 serverik named[2105]: client 192.168.44.10#49026: RFC 1918 response from Internet for 170.44.168.192.in-addr.arpa
Feb 24 16:09:01 serverik /USR/SBIN/CRON[4764]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 16:17:01 serverik /USR/SBIN/CRON[4776]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 16:39:01 serverik /USR/SBIN/CRON[4792]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 16:50:44 serverik named[2105]: client 192.168.44.10#42034: RFC 1918 response from Internet for 170.44.168.192.in-addr.arpa
Feb 24 16:51:02 serverik kernel: [75687.793765] usb 4-6: USB disconnect, address 9
Feb 24 16:51:02 serverik NetworkManager: <debug> [1298562662.859614] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Samsung_S2_Portable_0000002CE1451_0_0').
Feb 24 16:51:02 serverik NetworkManager: <debug> [1298562662.863597] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host_scsi_device_lun0').
Feb 24 16:51:02 serverik NetworkManager: <debug> [1298562662.867854] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host').
Feb 24 16:51:02 serverik NetworkManager: <debug> [1298562662.875895] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0').
Feb 24 16:51:02 serverik NetworkManager: <debug> [1298562662.886294] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_usbraw').
Feb 24 16:51:02 serverik NetworkManager: <debug> [1298562662.909146] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_72F2AB12F2AAD99D').
Feb 24 16:51:02 serverik NetworkManager: <debug> [1298562662.963851] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451').
Feb 24 17:09:01 serverik /USR/SBIN/CRON[4839]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 17:13:15 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/A/IN': 2001:678:4::16#53
Feb 24 17:13:15 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/A/IN': 2a00:d40:1:1::5#53
Feb 24 17:17:01 serverik /USR/SBIN/CRON[4856]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 17:39:01 serverik /USR/SBIN/CRON[4866]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 17:44:43 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:628:453:420::48#53
Feb 24 17:44:43 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/AAAA/IN': 2001:678:4::16#53
Feb 24 18:09:01 serverik /USR/SBIN/CRON[4888]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 18:17:01 serverik /USR/SBIN/CRON[4898]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 18:39:01 serverik /USR/SBIN/CRON[4913]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 19:03:00 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:11::1#53
Feb 24 19:09:01 serverik /USR/SBIN/CRON[4936]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 19:17:01 serverik /USR/SBIN/CRON[4951]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 19:32:33 serverik named[2105]: network unreachable resolving '133.218.151.213.in-addr.arpa/PTR/IN': 2001:13c7:7010::53#53
Feb 24 19:32:33 serverik named[2105]: network unreachable resolving '133.218.151.213.in-addr.arpa/PTR/IN': 2001:500:13::73#53
Feb 24 19:32:33 serverik named[2105]: network unreachable resolving 'sec1.apnic.net/AAAA/IN': 2001:dc0:4001:1:0:1836:0:140#53
Feb 24 19:32:33 serverik named[2105]: network unreachable resolving 'ns-pri.ripe.net/AAAA/IN': 2001:660:3006:1::1:1#53
Feb 24 19:32:33 serverik named[2105]: network unreachable resolving 'ns4.apnic.com/AAAA/IN': 2001:dc0:2001:a:4608::59#53
Feb 24 19:32:33 serverik named[2105]: network unreachable resolving 'ns5.apnic.net/A/IN': 2001:500:13::c7d4:35#53
Feb 24 19:32:33 serverik named[2105]: network unreachable resolving 'ns5.apnic.net/AAAA/IN': 2001:500:13::c7d4:35#53
Feb 24 19:32:33 serverik named[2105]: network unreachable resolving 'ns1.orange.sk/AAAA/IN': 2001:6b0:7::2#53
Feb 24 19:39:01 serverik /USR/SBIN/CRON[4995]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 19:39:37 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/A/IN': 2001:7fd::1#53
Feb 24 19:39:37 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/A/IN': 2001:500:1::803f:235#53
Feb 24 19:39:37 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:678:f::1#53
Feb 24 19:39:37 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:678:1::1#53
Feb 24 19:39:37 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:628:453:420::48#53
Feb 24 20:09:01 serverik /USR/SBIN/CRON[5051]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 20:17:01 serverik /USR/SBIN/CRON[5069]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 20:39:01 serverik /USR/SBIN/CRON[5081]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 20:41:32 serverik named[2105]: network unreachable resolving 'v.arin.net/A/IN': 2001:500:31::108#53
Feb 24 20:41:33 serverik named[2105]: network unreachable resolving 'blackhole-1.iana.org/AAAA/IN': 2001:500:c::1#53
Feb 24 20:41:33 serverik named[2105]: network unreachable resolving 'blackhole-1.iana.org/AAAA/IN': 2001:500:f::1#53
Feb 24 20:41:33 serverik named[2105]: network unreachable resolving 'blackhole-1.iana.org/AAAA/IN': 2001:500:e::1#53
Feb 24 20:41:33 serverik named[2105]: network unreachable resolving 'blackhole-2.iana.org/A/IN': 2001:500:89::53#53
Feb 24 20:41:33 serverik named[2105]: network unreachable resolving 'blackhole-2.iana.org/A/IN': 2620:0:2ee0:2::153#53
Feb 24 20:41:33 serverik named[2105]: client 192.168.44.10#59735: RFC 1918 response from Internet for 170.44.168.192.in-addr.arpa
Feb 24 20:41:57 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:678:1::1#53
Feb 24 20:41:57 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/AAAA/IN': 2a00:d40:1:1::5#53
Feb 24 20:41:57 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:678:11::1#53
Feb 24 20:41:57 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/A/IN': 2001:628:453:420::48#53
Feb 24 20:59:58 serverik named[2105]: client 192.168.44.10#54975: RFC 1918 response from Internet for 170.44.168.192.in-addr.arpa
Feb 24 21:09:01 serverik /USR/SBIN/CRON[5146]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 21:17:01 serverik /USR/SBIN/CRON[5160]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 21:23:01 serverik named[2105]: client 192.168.44.10#36437: RFC 1918 response from Internet for 170.44.168.192.in-addr.arpa
Feb 24 21:39:01 serverik /USR/SBIN/CRON[5185]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 21:43:07 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:f::1#53
Feb 24 21:43:07 serverik named[2105]: network unreachable resolving 'ns.forpsi.it/A/IN': 2001:760:ffff:ffff::ca#53
Feb 24 21:43:07 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:11::1#53
Feb 24 21:43:07 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:1::1#53
Feb 24 21:43:07 serverik named[2105]: network unreachable resolving 'ns.forpsi.cz/AAAA/IN': 2001:678:10::1#53
Feb 24 22:09:01 serverik /USR/SBIN/CRON[5218]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Feb 24 22:17:01 serverik /USR/SBIN/CRON[5230]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 24 22:33:01 serverik named[2105]: client 192.168.44.10#50994: RFC 1918 response from Internet for 170.44.168.192.in-addr.arpa
Feb 24 22:34:20 serverik kernel: [96284.980034] usb 4-6: new high speed USB device using ehci_hcd and address 10
Feb 24 22:34:20 serverik kernel: [96285.113049] usb 4-6: configuration #1 chosen from 1 choice
Feb 24 22:34:20 serverik kernel: [96285.114038] scsi10 : SCSI emulation for USB Mass Storage devices
Feb 24 22:34:20 serverik kernel: [96285.114125] usb-storage: device found at 10
Feb 24 22:34:20 serverik kernel: [96285.114128] usb-storage: waiting for device to settle before scanning
Feb 24 22:34:20 serverik kernel: [96285.114803] usb 4-6: New USB device found, idVendor=04e8, idProduct=1f05
Feb 24 22:34:20 serverik kernel: [96285.114808] usb 4-6: New USB device strings: Mfr=1, Product=11, SerialNumber=3
Feb 24 22:34:20 serverik kernel: [96285.114813] usb 4-6: Product: Samsung S2 Portable
Feb 24 22:34:20 serverik kernel: [96285.114815] usb 4-6: Manufacturer: JMicron
Feb 24 22:34:20 serverik kernel: [96285.114818] usb 4-6: SerialNumber: 0000002CE1451
Feb 24 22:34:20 serverik NetworkManager: <debug> [1298583260.230731] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451').
Feb 24 22:34:20 serverik NetworkManager: <debug> [1298583260.661164] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0').
Feb 24 22:34:20 serverik NetworkManager: <debug> [1298583260.719658] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_usbraw').
Feb 24 22:34:25 serverik kernel: [96290.112326] usb-storage: device scan complete
Feb 24 22:34:25 serverik kernel: [96290.152010] scsi 10:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
Feb 24 22:34:25 serverik kernel: [96290.164204] sd 10:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
Feb 24 22:34:25 serverik kernel: [96290.165046] sd 10:0:0:0: [sdd] Write Protect is off
Feb 24 22:34:25 serverik kernel: [96290.165051] sd 10:0:0:0: [sdd] Mode Sense: 28 00 00 00
Feb 24 22:34:25 serverik kernel: [96290.165055] sd 10:0:0:0: [sdd] Assuming drive cache: write through
Feb 24 22:34:25 serverik kernel: [96290.166168] sd 10:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
Feb 24 22:34:25 serverik kernel: [96290.167043] sd 10:0:0:0: [sdd] Write Protect is off
Feb 24 22:34:25 serverik kernel: [96290.167048] sd 10:0:0:0: [sdd] Mode Sense: 28 00 00 00
Feb 24 22:34:25 serverik kernel: [96290.167051] sd 10:0:0:0: [sdd] Assuming drive cache: write through
Feb 24 22:34:25 serverik kernel: [96290.167059]  sdd: sdd1
Feb 24 22:34:25 serverik kernel: [96290.187484] sd 10:0:0:0: [sdd] Attached SCSI disk
Feb 24 22:34:25 serverik NetworkManager: <debug> [1298583265.298841] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host').
Feb 24 22:34:25 serverik NetworkManager: <debug> [1298583265.326912] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_1f05_0000002CE1451_if0_scsi_host_scsi_device_lun0').
Feb 24 22:34:25 serverik NetworkManager: <debug> [1298583265.743509] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Samsung_S2_Portable_0000002CE1451_0_0').
Feb 24 22:34:25 serverik NetworkManager: <debug> [1298583265.808935] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_72F2AB12F2AAD99D').

[p3dr0]

Zdravim vo spolok dakujem za vase poskytnute informacie problem vyrieseny. Pichol som to do linuxu v ubunte a dal normal odpojit a pak hodil na ten debian a uz ho aj on v pohode nacital... Takze je po probleme... dakujem za vas cas....