tady je ten vypis:
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.2 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /wubildr.mbr /wubildr
sda4: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 63.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe /wubildr.mbr /wubildr
sda6: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 63.
Operating System:
Boot files/dirs: /ubuntu/winboot/wubildr.mbr /ubuntu/winboot/wubildr
/ubuntu/disks/root.disk /ubuntu/disks/swap.disk
sda6/Wubi: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb1: _________________________________________________________________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 250,1 GB, 250 059 350 016 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 30 401, celkem 488 397 168 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 19,531,775 19,529,728 83 Linux
/dev/sda2 19,531,776 25,370,623 5,838,848 82 Linux swap / Solaris
/dev/sda3 * 25,372,672 414,493,064 389,120,393 7 HPFS/NTFS
/dev/sda4 414,493,126 488,392,064 73,898,939 f W95 Ext d (LBA)
/dev/sda5 414,493,128 455,442,749 40,949,622 7 HPFS/NTFS
/dev/sda6 455,442,813 488,392,064 32,949,252 7 HPFS/NTFS
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1 031 MB, 1 031 798 272 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 125, celkem 2 015 231 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start End Size Id System
/dev/sdb1 * 63 2,015,230 2,015,168 b W95 FAT32
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 b64d8e7b-4e16-4480-a454-0e023f670bdb ext4
/dev/sda: PTTYPE="dos"
/dev/sda1 f4324fc0-a884-4fe4-b26c-0302a2fab702 ext4
/dev/sda2 89282720-4036-4bf2-848a-8fc174deeb62 swap
/dev/sda3 B870047A7004421C ntfs Data
/dev/sda4: PTTYPE="dos"
/dev/sda5 3E04CC1504CBCDD9 ntfs Windows
/dev/sda6 4C0CA1870CA16CA0 ntfs Linux
/dev/sdb: PTTYPE="dos"
/dev/sdb1 0C27-01E5 vfat
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sdb1 /media/0C27-01E5 vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,flush)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f4324fc0-a884-4fe4-b26c-0302a2fab702
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1024x768
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f4324fc0-a884-4fe4-b26c-0302a2fab702
set locale_dir=($root)/boot/grub/locale
set lang=cs
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=0
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f4324fc0-a884-4fe4-b26c-0302a2fab702
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=f4324fc0-a884-4fe4-b26c-0302a2fab702 ro splash vga=771 quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f4324fc0-a884-4fe4-b26c-0302a2fab702
echo 'Loading Linux 2.6.32-28-generic ...'
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=f4324fc0-a884-4fe4-b26c-0302a2fab702 ro single splash vga=771
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f4324fc0-a884-4fe4-b26c-0302a2fab702
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=f4324fc0-a884-4fe4-b26c-0302a2fab702 ro splash vga=771 quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f4324fc0-a884-4fe4-b26c-0302a2fab702
echo 'Loading Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=f4324fc0-a884-4fe4-b26c-0302a2fab702 ro single splash vga=771
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f4324fc0-a884-4fe4-b26c-0302a2fab702
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f4324fc0-a884-4fe4-b26c-0302a2fab702
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
/dev/sda2 none swap sw 0 0
=================== sda1: Location of files loaded by Grub: ===================
2.4GB: boot/grub/core.img
2.6GB: boot/grub/grub.cfg
2.7GB: boot/initrd.img-2.6.32-24-generic
4.3GB: boot/initrd.img-2.6.32-28-generic
2.6GB: boot/vmlinuz-2.6.32-24-generic
2.4GB: boot/vmlinuz-2.6.32-28-generic
4.3GB: initrd.img
2.7GB: initrd.img.old
2.4GB: vmlinuz
2.6GB: vmlinuz.old
======================== sda6/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ntfs
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 4c0ca1870ca16ca0
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1024x768
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ntfs
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 4c0ca1870ca16ca0
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=cs
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.35-25-generic" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 4c0ca1870ca16ca0
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.35-25-generic root=/dev/sda6 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.35-25-generic
}
menuentry "Ubuntu, Linux 2.6.35-25-generic (recovery mode)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 4c0ca1870ca16ca0
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.35-25-generic root=/dev/sda6 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.35-25-generic
}
menuentry "Ubuntu, Linux 2.6.35-22-generic" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 4c0ca1870ca16ca0
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.35-22-generic root=/dev/sda6 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, Linux 2.6.35-22-generic (recovery mode)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 4c0ca1870ca16ca0
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.35-22-generic root=/dev/sda6 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set c67a933e7a9329e7
chainloader +1
}
menuentry "Windows 7 (loader) (on /dev/sda2)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8c60947860946b2a
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
============================= sda6/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
================= sda6/Wubi: Location of files loaded by Grub: =================
4.7GB: boot/grub/core.img
1.1GB: boot/grub/grub.cfg
3.6GB: boot/initrd.img-2.6.35-22-generic
6.1GB: boot/initrd.img-2.6.35-25-generic
2.0GB: boot/vmlinuz-2.6.35-22-generic
5.2GB: boot/vmlinuz-2.6.35-25-generic
6.1GB: initrd.img
3.6GB: initrd.img.old
5.2GB: vmlinuz
2.0GB: vmlinuz.old
Téma: win 7 a GRUB2 (Přečteno 1994 krát)
