Autor Téma: ATI radeon a LCD (Přečteno 3951 krát)

marek@ubuntu · « **kdy:** 31 Prosince 2006, 01:20:28 »

Ahojte....Nahodil som si Ubuntu 6.10.Islo vsetko super az do vtedy ked som nahodil ovladace od ATI...Robil som to asi 100krat ale na CRT-cku..A teraz ked sa mam prihlasit monitor vypne..Mam monitor pripojeni cez DVI..Dakujem

Jere · « **Odpověď #1 kdy:** 31 Prosince 2006, 02:38:09 »

Mas nastaveny spravne monitor v xorg.conf? Obnovovaci frekvenci a rozliseni?

marek@ubuntu · « **Odpověď #2 kdy:** 31 Prosince 2006, 11:13:53 »

skusim

marek@ubuntu · « **Odpověď #3 kdy:** 31 Prosince 2006, 11:44:42 »

mam to na 1024 768 70hz

marek@ubuntu · « **Odpověď #4 kdy:** 31 Prosince 2006, 13:07:20 »

vypis xorgu

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "Files"

# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "sk"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "B71A"
Option "DPMS"
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
# 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz
Modeline "1024x768_70.00" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync

EndSection

Section "Device"
Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Driver "ati"
BusID "PCI:2:0:0"
EndSection

Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Monitor "B71A"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "0"
EndSection

Martin - ViPEr*CZ* · « **Odpověď #5 kdy:** 31 Prosince 2006, 13:07:40 »

Zkus to dát na 60hz, protože LCD vlastně obnovovací frekvenci nemá a pokud to nepomůže tak zkus dpkg-reconfigure xserver-xorg

marek@ubuntu · « **Odpověď #6 kdy:** 31 Prosince 2006, 14:28:36 »

a AKO TO MAM DAT?

Martin - ViPEr*CZ* · « **Odpověď #7 kdy:** 31 Prosince 2006, 15:01:29 »

# 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz
Modeline "1024x768_70.00" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync

Jak jsi vygeneroval todle tak to udělej znova ale dej tam 60 a pak to nahrad v xorg.conf
a nebo v konzoli dej:
sudo dpkg-reconfigure xserver-xorg a nakonfiguruj si znova xorg.conf (doporučuju si udělat zálohu)

marek@ubuntu · « **Odpověď #8 kdy:** 31 Prosince 2006, 15:32:40 »

dobre vygeneroval som to dal som to aj :
Section "Monitor"
Identifier "B71A"
Option "DPMS"
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

Dal som to na koniec obidvoch sekcii...NO ale stale nic...No neviem

marek@ubuntu · « **Odpověď #9 kdy:** 31 Prosince 2006, 16:05:32 »

zas nis sa neudialo---

marek@ubuntu · « **Odpověď #10 kdy:** 31 Prosince 2006, 16:06:15 »

720 x 400 @ 70 Hz
640 x 480 @ 60/75 Hz
800 x 600 @ 60/75 Hz
1024 x 768 @ 60/70/75 Hz
1280 x 1024 @ 60/75 Hz

marek@ubuntu · « **Odpověď #11 kdy:** 31 Prosince 2006, 16:07:04 »

podporuje monitor

Martin - ViPEr*CZ* · « **Odpověď #12 kdy:** 31 Prosince 2006, 17:13:59 »

ection "Monitor"
   Identifier "COMPAQ P1220"
   HorizSync 30.0 - 130.0
   VertRefresh 50.0 - 160.0
   Option    "DPMS"
   # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
Modeline "1280x1024_100.00" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync

EndSection

Section "Monitor"
   Identifier "aticonfig-Monitor[0]"
   Option    "VendorName" "ATI Proprietary Driver"
   Option    "ModelName" "Generic Autodetecting Monitor"
   Option    "DPMS" "true"
EndSection

Takhle to mám na klasickým monitoru...až se dostanu k notebooku tak to pošlu jak to mám tam na LCD pokud někdo neporadí dříve...

marek@ubuntu · « **Odpověď #13 kdy:** 31 Prosince 2006, 17:41:54 »

skusim to na novo...

marek@ubuntu · « **Odpověď #14 kdy:** 31 Prosince 2006, 20:43:27 »

stale to nejde

marek@ubuntu · « **Odpověď #15 kdy:** 01 Ledna 2007, 13:13:18 »

neviete?

mar10 · « **Odpověď #16 kdy:** 07 Ledna 2007, 09:29:53 »

Ahoj, mam ATI Radeon 9550 a pouzivam DVI. Todle je cast meho xorg.conf, treba ti pomuze:

Kód: [Vybrat]

Section "Monitor"
	Identifier   "monitor0"
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "ati0"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:1:0:0"
	Screen      0
EndSection

Section "Screen"
	Identifier "screen0"
	Device     "ati0"
	Monitor    "monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier         "Default Layout"
	Screen        0  "screen0" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Autor Téma: ATI radeon a LCD (Přečteno 3951 krát)

marek@ubuntu

ATI radeon a LCD

Jere

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

Martin - ViPErCZ

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

Martin - ViPErCZ

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

Martin - ViPErCZ

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

marek@ubuntu

ATI radeon a LCD

mar10

ATI radeon a LCD