mám stolní počítač a monitor je připojený přes VGA port, monitor mám docela starý CRT značky noc na vyšší rozlišení mi doteď v pořádku fungoval. Grafiku mám nVidia GeForce4 MX 440 AGP 8x. CPU používám Athlon XP 2000+ a 256MB ram. Valím na Xubuntu 10.04.
cat vypíše:
tomas@tomas-desktop:~$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
a dmesg:
tomas@tomas-desktop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-33-generic (buildd@zirconium) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #72-Ubuntu SMP Fri Jul 29 21:08:37 UTC 2011 (Ubuntu 2.6.32-33.72-generic 2.6.32.41+drm33.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0E0000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] modified: 000000000fff0000 - 000000000fff8000 (ACPI data)
[ 0.000000] modified: 000000000fff8000 - 0000000010000000 (ACPI NVS)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000fc00000 page 2M
[ 0.000000] 000fc00000 - 000fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to fff0000 @ 10000-15000
[ 0.000000] RAMDISK: 0f83e000 - 0ffdf369
[ 0.000000] ACPI: RSDP 000fa9e0 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 0fff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP 0fff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0fff0120 031BC (v01 VIA VIA_K7 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 0fff8000 00040
[ 0.000000] ACPI: APIC 0fff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 0 - 0fff0000
[ 0.000000] node 0 low ram: 00000000 - 0fff0000
[ 0.000000] node 0 bootmap 00011000 - 00013000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008e0ef8] TEXT DATA BSS ==> [0000100000 - 00008e0ef8]
[ 0.000000] #4 [000f83e000 - 000ffdf369] RAMDISK ==> [000f83e000 - 000ffdf369]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008e1000 - 00008e4108] BRK ==> [00008e1000 - 00008e4108]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - 0000013000]
[ 0.000000] found SMP MP-table at [c00fb930] fb930
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65407
[ 0.000000] free_area_init_node: node 0, pgdat c079a7c0, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60944 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36312 r0 d21032 u4194304
[ 0.000000] pcpu-alloc: s36312 r0 d21032 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64895
[ 0.000000] Kernel command line: root=UUID=0c7f61a5-c275-48b5-9703-46d496293485 ro quiet splash
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1310080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 241812k/262080k available (4675k kernel code, 19524k reserved, 2127k data, 668k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB)
[ 0.000000] .data : 0xc0590de7 - 0xc07a4d88 (2127 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590de7 (4675 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.306 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.61 BogoMIPS (lpj=6665224)
[ 0.004038] Security Framework initialized
[ 0.004082] AppArmor: AppArmor initialized
[ 0.004094] Mount-cache hash table entries: 512
[ 0.004302] Initializing cgroup subsys ns
[ 0.004309] Initializing cgroup subsys cpuacct
[ 0.004316] Initializing cgroup subsys memory
[ 0.004331] Initializing cgroup subsys devices
[ 0.004335] Initializing cgroup subsys freezer
[ 0.004338] Initializing cgroup subsys net_cls
[ 0.004369] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[ 0.004374] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004379] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004384] mce: CPU supports 4 MCE banks
[ 0.004416] Performance Events: AMD PMU driver.
[ 0.004437] ... version: 0
[ 0.004440] ... bit width: 48
[ 0.004442] ... generic registers: 4
[ 0.004445] ... value mask: 0000ffffffffffff
[ 0.004448] ... max period: 00007fffffffffff
[ 0.004451] ... fixed-purpose events: 0
[ 0.004453] ... event mask: 000000000000000f
[ 0.004460] Checking 'hlt' instruction... OK.
[ 0.020734] SMP alternatives: switching to UP code
[ 0.028725] Freeing SMP alternatives: 19k freed
[ 0.028778] ACPI: Core revision 20090903
[ 0.037190] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.037207] ftrace: allocating 21725 entries in 43 pages
[ 0.040226] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.041298] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082751] CPU0: AMD Athlon(tm) XP 2000+ stepping 01
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (3332.61 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] devtmpfs: initialized
[ 0.084001] regulator: core version 0.5
[ 0.084001] Time: 15:07:41 Date: 09/27/11
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.086907] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[ 0.086910] PCI: Using configuration type 1 for base access
[ 0.088306] bio: create slab <bio-0> at 0
[ 0.088996] ACPI: EC: Look up EC in DSDT
[ 0.095741] ACPI: Interpreter enabled
[ 0.095746] ACPI: (supports S0 S1 S4 S5)
[ 0.095775] ACPI: Using IOAPIC for interrupt routing
[ 0.100663] ACPI: Power Resource [URP1] (off)
[ 0.100704] ACPI: Power Resource [URP2] (off)
[ 0.100743] ACPI: Power Resource [FDDP] (off)
[ 0.100781] ACPI: Power Resource [LPTP] (off)
[ 0.100958] ACPI: No dock devices found.
[ 0.101131] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.101202] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.101302] pci 0000:00:01.0: supports D1
[ 0.101343] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfffff00-0xdfffffff]
[ 0.101351] pci 0000:00:07.0: reg 14 io port: [0xec00-0xec07]
[ 0.101359] pci 0000:00:07.0: reg 18 io port: [0xe800-0xe8ff]
[ 0.101393] pci 0000:00:07.0: supports D2
[ 0.101397] pci 0000:00:07.0: PME# supported from D2 D3hot
[ 0.101402] pci 0000:00:07.0: PME# disabled
[ 0.101460] pci 0000:00:10.0: reg 20 io port: [0xdc00-0xdc1f]
[ 0.101486] pci 0000:00:10.0: supports D1 D2
[ 0.101489] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101494] pci 0000:00:10.0: PME# disabled
[ 0.101543] pci 0000:00:10.1: reg 20 io port: [0xe000-0xe01f]
[ 0.101569] pci 0000:00:10.1: supports D1 D2
[ 0.101572] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101577] pci 0000:00:10.1: PME# disabled
[ 0.101626] pci 0000:00:10.2: reg 20 io port: [0xe400-0xe41f]
[ 0.101652] pci 0000:00:10.2: supports D1 D2
[ 0.101655] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101659] pci 0000:00:10.2: PME# disabled
[ 0.101697] pci 0000:00:10.3: reg 10 32bit mmio: [0xdffffe00-0xdffffeff]
[ 0.101739] pci 0000:00:10.3: supports D1 D2
[ 0.101742] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101747] pci 0000:00:10.3: PME# disabled
[ 0.101812] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.101821] pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
[ 0.101826] pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
[ 0.101892] pci 0000:00:11.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.101956] pci 0000:00:11.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.102000] pci 0000:00:11.5: supports D1 D2
[ 0.102037] pci 0000:00:12.0: reg 10 io port: [0xd400-0xd4ff]
[ 0.102045] pci 0000:00:12.0: reg 14 32bit mmio: [0xdffffd00-0xdffffdff]
[ 0.102083] pci 0000:00:12.0: supports D1 D2
[ 0.102086] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102091] pci 0000:00:12.0: PME# disabled
[ 0.102146] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
[ 0.102153] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.102172] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfee0000-0xdfefffff]
[ 0.102225] pci 0000:00:01.0: bridge 32bit mmio: [0xdde00000-0xdfefffff]
[ 0.102231] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcdd00000-0xddcfffff]
[ 0.102240] pci_bus 0000:00: on NUMA node 0
[ 0.102247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.104843] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.104977] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.105107] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.105236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.105420] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.105424] vgaarb: loaded
[ 0.105635] SCSI subsystem initialized
[ 0.105803] libata version 3.00 loaded.
[ 0.105940] usbcore: registered new interface driver usbfs
[ 0.105958] usbcore: registered new interface driver hub
[ 0.106008] usbcore: registered new device driver usb
[ 0.106214] ACPI: WMI: Mapper loaded
[ 0.106217] PCI: Using ACPI for IRQ routing
[ 0.106415] NetLabel: Initializing
[ 0.106418] NetLabel: domain hash size = 128
[ 0.106421] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.106444] NetLabel: unlabeled traffic allowed by default
[ 0.106513] Switching to clocksource tsc
[ 0.108001] AppArmor: AppArmor Filesystem Enabled
[ 0.108001] pnp: PnP ACPI init
[ 0.108001] ACPI: bus type pnp registered
[ 0.111050] pnp: PnP ACPI: found 11 devices
[ 0.111054] ACPI: ACPI bus type pnp unregistered
[ 0.111060] PnPBIOS: Disabled by ACPI PNP
[ 0.145890] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.145894] pci 0000:00:01.0: IO window: disabled
[ 0.145902] pci 0000:00:01.0: MEM window: 0xdde00000-0xdfefffff
[ 0.145907] pci 0000:00:01.0: PREFETCH window: 0xcdd00000-0xddcfffff
[ 0.145927] pci 0000:00:01.0: setting latency timer to 64
[ 0.145935] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.145939] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.145943] pci_bus 0000:01: resource 1 mem: [0xdde00000-0xdfefffff]
[ 0.145947] pci_bus 0000:01: resource 2 pref mem [0xcdd00000-0xddcfffff]
[ 0.146008] NET: Registered protocol family 2
[ 0.146148] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.146535] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.146672] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.146803] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.146806] TCP reno registered
[ 0.146900] NET: Registered protocol family 1
[ 0.146923] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.147023] pci 0000:01:00.0: Boot video device
[ 0.147363] cpufreq-nforce2: No nForce2 chipset.
[ 0.147409] Scanning for low memory corruption every 60 seconds
[ 0.147605] audit: initializing netlink socket (disabled)
[ 0.147627] type=2000 audit(1317136061.145:1): initialized
[ 0.159506] Trying to unpack rootfs image as initramfs...
[ 0.174226] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.176476] VFS: Disk quotas dquot_6.5.2
[ 0.176572] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.181911] fuse init (API version 7.13)
[ 0.182134] msgmni has been set to 472
[ 0.182592] alg: No test for stdrng (krng)
[ 0.182644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.182649] io scheduler noop registered
[ 0.182652] io scheduler anticipatory registered
[ 0.182655] io scheduler deadline registered
[ 0.182711] io scheduler cfq registered (default)
[ 0.182882] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.182916] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.183072] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.183081] ACPI: Power Button [PWRB]
[ 0.183159] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.183170] ACPI: Sleep Button [SLPB]
[ 0.183243] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.183247] ACPI: Power Button [PWRF]
[ 0.183499] processor LNXCPU:00: registered as cooling_device0
[ 0.192360] isapnp: Scanning for PnP cards...
[ 0.198251] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.198379] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.198486] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.198871] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.199019] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.200564] brd: module loaded
[ 0.201284] loop: module loaded
[ 0.205589] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.205935] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
[ 0.206048] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
[ 0.206480] Fixed MDIO Bus: probed
[ 0.206540] PPP generic driver version 2.4.2
[ 0.206649] tun: Universal TUN/TAP device driver, 1.6
[ 0.206652] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.206796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.206827] alloc irq_desc for 21 on node -1
[ 0.206830] alloc kstat_irqs on node -1
[ 0.206844] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 0.206873] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 0.206925] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 0.207017] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffffe00
[ 0.250652] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 0.250799] usb usb1: configuration #1 chosen from 1 choice
[ 0.250845] hub 1-0:1.0: USB hub found
[ 0.250861] hub 1-0:1.0: 6 ports detected
[ 0.250940] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.250958] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.251037] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.251047] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.251096] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.251122] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
[ 0.251272] usb usb2: configuration #1 chosen from 1 choice
[ 0.251308] hub 2-0:1.0: USB hub found
[ 0.251324] hub 2-0:1.0: 2 ports detected
[ 0.251384] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.251392] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.251454] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.251477] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e000
[ 0.251615] usb usb3: configuration #1 chosen from 1 choice
[ 0.251651] hub 3-0:1.0: USB hub found
[ 0.251666] hub 3-0:1.0: 2 ports detected
[ 0.251724] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.251731] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.251783] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.251806] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400
[ 0.251953] usb usb4: configuration #1 chosen from 1 choice
[ 0.251990] hub 4-0:1.0: USB hub found
[ 0.252004] hub 4-0:1.0: 2 ports detected
[ 0.252139] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.257833] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.257856] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.258167] mice: PS/2 mouse device common for all mice
[ 0.258396] rtc_cmos 00:02: RTC can wake from S4
[ 0.258475] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.258527] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.258690] device-mapper: uevent: version 1.0.3
[ 0.258895] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.261532] device-mapper: multipath: version 1.1.0 loaded
[ 0.261551] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.261947] EISA: Probing bus 0 at eisa.0
[ 0.261990] EISA: Detected 0 cards.
[ 0.263129] cpuidle: using governor ladder
[ 0.263135] cpuidle: using governor menu
[ 0.263759] TCP cubic registered
[ 0.264011] NET: Registered protocol family 10
[ 0.265077] NET: Registered protocol family 17
[ 0.265142] powernow-k8: Processor cpuid 681 not supported
[ 0.265185] Using IPI No-Shortcut mode
[ 0.265379] PM: Resume from disk failed.
[ 0.265402] registered taskstats version 1
[ 0.265716] Magic number: 11:702:134
[ 0.265816] acpi device:09: hash matches
[ 0.265876] rtc_cmos 00:02: setting system clock to 2011-09-27 15:07:41 UTC (1317136061)
[ 0.265881] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.265883] EDD information not available.
[ 0.281803] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.795848] Freeing initrd memory: 7812k freed
[ 0.856694] isapnp: No Plug & Play device found
[ 0.856755] Freeing unused kernel memory: 668k freed
[ 0.858396] Write protecting the kernel text: 4676k
[ 0.858439] Write protecting the kernel read-only data: 1848k
[ 0.897618] udev: starting version 151
[ 0.965671] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1.146352] usb 2-1: configuration #1 chosen from 1 choice
[ 1.198562] Floppy drive(s): fd0 is 1.44M
[ 1.204387] pata_via 0000:00:11.1: version 0.3.4
[ 1.204414] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 1.211685] scsi0 : pata_via
[ 1.216093] FDC 0 is a post-1991 82077
[ 1.221898] scsi1 : pata_via
[ 1.225970] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.225978] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.231953] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.232100] alloc irq_desc for 23 on node -1
[ 1.232104] alloc kstat_irqs on node -1
[ 1.232118] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.248226] eth0: VIA Rhine II at 0xdffffd00, 00:0c:76:5a:4a:29, IRQ 23.
[ 1.248941] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 1.388020] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 1.396343] ata1.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 1.396353] ata1.00: ATA-6: WDC WD800BB-22DKA0, 77.07W77, max UDMA/100
[ 1.396357] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.413225] ata1.00: configured for UDMA/100
[ 1.413445] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-22DK 77.0 PQ: 0 ANSI: 5
[ 1.413757] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.414327] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.414416] sd 0:0:0:0: [sda] Write Protect is off
[ 1.414421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.414465] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.414722] sda: sda1 sda2 < sda5 sda6 >
[ 1.469767] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.562183] usb 2-2: configuration #1 chosen from 1 choice
[ 1.600376] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
[ 1.600421] ata2.01: ATAPI: TOSHIBA ODD-DVD SD-M1802, 1030, max UDMA/33
[ 1.616252] ata2.00: configured for UDMA/33
[ 1.648282] ata2.01: configured for UDMA/33
[ 1.654683] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
[ 1.667114] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.667123] Uniform CD-ROM driver Revision: 3.20
[ 1.667590] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.667808] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.668803] scsi 1:0:1:0: CD-ROM TOSHIBA ODD-DVD SD-M1802 1030 PQ: 0 ANSI: 5
[ 1.673035] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.673499] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.673699] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.698266] usbcore: registered new interface driver hiddev
[ 1.711559] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input5
[ 1.711749] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:10.0-2/input0
[ 1.711807] usbcore: registered new interface driver usbhid
[ 1.711812] usbhid: v2.6:USB HID core driver
[ 2.209920] kjournald starting. Commit interval 5 seconds
[ 2.209942] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.360218] usb 2-2: USB disconnect, address 3
[ 6.592033] usb 2-2: new low speed USB device using uhci_hcd and address 4
[ 6.765576] usb 2-2: configuration #1 chosen from 1 choice
[ 6.781865] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input6
[ 6.782039] generic-usb 0003:1C4F:0003.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:10.0-2/input0
[ 12.370616] Adding 730916k swap on /dev/sda6. Priority:-1 extents:1 across:730916k
[ 12.700174] EXT3 FS on sda5, internal journal
[ 13.053386] udev: starting version 151
[ 14.430168] parport_pc 00:0a: reported by Plug and Play ACPI
[ 14.430297] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 14.513170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.769600] lp0: using parport0 (interrupt-driven).
[ 14.781150] ppdev: user-space parallel port driver
[ 14.862886] irda_init()
[ 14.862929] NET: Registered protocol family 23
[ 14.903817] psmouse serio1: ID: 10 00 64
[ 14.929548] Linux agpgart interface v0.103
[ 14.938031] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[ 14.950609] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 14.972906] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input7
[ 15.136844] ACPI: resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
[ 15.136851] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.142596] [drm] Initialized drm 1.1.0 20060810
[ 15.601516] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304
[ 15.601564] usbcore: registered new interface driver usblp
[ 15.783398] type=1505 audit(1317128877.014:2): operation="profile_load" pid=421 name="/sbin/dhclient3"
[ 15.783802] type=1505 audit(1317128877.014:3): operation="profile_load" pid=421 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.784475] type=1505 audit(1317128877.018:4): operation="profile_replace" pid=419 name="/sbin/dhclient3"
[ 15.784958] type=1505 audit(1317128877.018:5): operation="profile_replace" pid=419 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.785231] type=1505 audit(1317128877.018:6): operation="profile_load" pid=419 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.786254] type=1505 audit(1317128877.018:7): operation="profile_replace" pid=550 name="/sbin/dhclient3"
[ 15.786768] type=1505 audit(1317128877.018:8): operation="profile_replace" pid=550 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.787050] type=1505 audit(1317128877.018:9): operation="profile_replace" pid=550 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.789224] type=1505 audit(1317128877.022:10): operation="profile_replace" pid=421 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.013353] alloc irq_desc for 16 on node -1
[ 16.013361] alloc kstat_irqs on node -1
[ 16.013374] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.028652] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018100a2)
[ 16.028854] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 16.182010] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 16.182288] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 16.182292] [drm] nouveau 0000:01:00.0: BMP version 5.36
[ 16.182297] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.13
[ 16.182303] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.1
[ 16.182310] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000310 000088b8
[ 16.182315] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010302 00000000
[ 16.182319] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010300 000088b8
[ 16.182322] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000003
[ 16.182560] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[ 16.182565] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC7A4
[ 16.182612] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB52
[ 16.236635] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC8BF
[ 16.256088] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD033
[ 16.256108] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD04F
[ 16.256115] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xCAB9
[ 16.256128] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xCAED
[ 16.283407] [TTM] Zone kernel: Available graphics memory: 125304 kiB.
[ 16.283435] [drm] nouveau 0000:01:00.0: 64 MiB VRAM
[ 16.283531] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 16.283555] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 16.283613] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 16.283618] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[ 16.283999] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 16.286866] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 16.286887] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 16.286896] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 16.331060] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 16.331555] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 16.331860] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 16.333857] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 16.333865] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 16.333870] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 16.333875] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 16.608021] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 16.636033] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 16.636321] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo cf6ab800
[ 16.636800] fb0: nouveaufb frame buffer device
[ 16.636804] registered panic notifier
[ 16.636815] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 16.737415] vga16fb: initializing
[ 16.737429] vga16fb: mapped to 0xc00a0000
[ 16.737439] vga16fb: not registering due to another framebuffer present
[ 17.023211] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 17.705493] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2)
[ 17.705502] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 17.750199] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
[ 17.750210] [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
[ 17.753498] Console: switching to colour frame buffer device 90x36
[ 18.055458] alloc irq_desc for 22 on node -1
[ 18.055465] alloc kstat_irqs on node -1
[ 18.055478] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 18.055650] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 19.177026] type=1505 audit(1317128880.410:11): operation="profile_replace" pid=746 name="/sbin/dhclient3"
[ 20.164049] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 20.192101] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 20.480076] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 20.512095] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 20.522081] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 20.524747] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 20.739426] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 20.739433] apm: overridden by ACPI.
[ 20.897145] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 20.918069] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
[ 20.918076] [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
[ 23.579111] usb 2-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 25.244080] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 25.272033] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 25.564096] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 25.592020] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 25.872015] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 25.900014] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 27.580015] eth0: no IPv6 routers present
[ 66.592015] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 66.620015] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 66.900017] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 66.928014] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 68.572038] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 68.600031] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 84.568021] [drm] nouveau 0000:01:00.0: Load detected on output A
[ 84.596086] [drm] nouveau 0000:01:00.0: Load detected on output B
[ 1049.287442] __ratelimit: 24 callbacks suppressed
[ 1049.287453] chromium-browse[1403]: segfault at 244 ip 3fb3839e sp bfb97ee0 error 4 in libflashplayer.so[3fad6000+bc4000]
za odpověď děkuji
Téma: Změna rozlišení [vyřešeno] (Přečteno 8498 krát)
