Sweex 150N

[Liber]

Tato wifi karta nebyla pod Ubuntu rozpoznána a proto jsme jí rozběhl pomocí Windows ovladačů. bohužel zcela nelogicky přestaly fungovat USB porty. Zařízení jsou detekována, pouze pokud jsou zapojena před zapnutím Pc. Věděl by někdo jak je opět oživit ?

[Filip Dominec]

Ahoj, zvláštní chyba. Sweex je wifi adaptér, který se připojuje do USB?

Klíčový bude výstup příkazů dmesg; lsusb.

Hoď sem prosím mezi tagy [ code ] [ /code ], co to vypíše 1) před připojením Sweexu, 2) po připojení Sweexu, 3) po připojení dalšího (nefungujícího?) zařízení, třeba flashky.

[Liber]

Jedná se o PCI kartu, kterou se mi podařilo rozchodit pouze pod Ubuntu 11.04 x86 s ovladači pro Win Xp x86 (XP 64 nebo Vista/7 x86/64 ovladače byly nefunkční pod příslušným Ubuntu 11.04 x86/64).
USB porty přestaly reagovat vždy ihned po instalaci Win Xp x86 ovladačů (vyzkoušeno 3x pod x86, pod 64bit se karta nerozběhla vůbec).
Přikládám potřebné výpisy:

Kód: [Vybrat]

1A,bez aktivní wifi-karty dmesg:
[ code ] [    0.070282] pnp 00:06: [io  0x00a2-0x00bf]
[    0.070284] pnp 00:06: [io  0x00e0-0x00ef]
[    0.070286] pnp 00:06: [io  0x04d0-0x04d1]
[    0.070289] pnp 00:06: [io  0x0220-0x0225]
[    0.070347] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.070351] system 00:06: [io  0x0220-0x0225] has been reserved
[    0.070354] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.070521] pnp 00:07: [io  0x03f0-0x03f5]
[    0.070523] pnp 00:07: [io  0x03f7]
[    0.070525] pnp 00:07: [irq 6]
[    0.070528] pnp 00:07: [dma 2]
[    0.070579] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.070793] pnp 00:08: [io  0x03f8-0x03ff]
[    0.070796] pnp 00:08: [irq 4]
[    0.070857] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.071269] pnp 00:09: [io  0x0378-0x037f]
[    0.071271] pnp 00:09: [irq 7]
[    0.071327] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.071443] pnp 00:0a: [irq 12]
[    0.071481] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.071509] pnp 00:0b: [io  0x0060]
[    0.071512] pnp 00:0b: [io  0x0064]
[    0.071514] pnp 00:0b: [irq 1]
[    0.071551] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.071585] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    0.071637] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.071641] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.071847] pnp 00:0d: [mem 0x000d0000-0x000d3fff]
[    0.071850] pnp 00:0d: [mem 0x000d5000-0x000d7fff]
[    0.071852] pnp 00:0d: [mem 0x000f0000-0x000fbfff]
[    0.071855] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.071857] pnp 00:0d: [mem 0x37f00000-0x37ffffff]
[    0.071860] pnp 00:0d: [mem 0x37ef0000-0x37efffff]
[    0.071863] pnp 00:0d: [mem 0xffff0000-0xffffffff]
[    0.071865] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.071868] pnp 00:0d: [mem 0x00100000-0x37eeffff]
[    0.071870] pnp 00:0d: [mem 0x38000000-0x3fffffff]
[    0.071877] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.071880] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.071882] pnp 00:0d: [mem 0xfff80000-0xfffeffff]
[    0.071908] pnp 00:0d: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.071913] pnp 00:0d: disabling [mem 0x000d5000-0x000d7fff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.071917] pnp 00:0d: disabling [mem 0x000f0000-0x000fbfff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.071922] pnp 00:0d: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.071927] pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.071931] pnp 00:0d: disabling [mem 0x00100000-0x37eeffff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.071976] system 00:0d: [mem 0x37f00000-0x37ffffff] could not be reserved
[    0.071980] system 00:0d: [mem 0x37ef0000-0x37efffff] could not be reserved
[    0.071983] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[    0.071987] system 00:0d: [mem 0x38000000-0x3fffffff] has been reserved
[    0.071990] system 00:0d: [mem 0xfec00000-0xfec00fff] has been reserved
[    0.071994] system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.072014] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.072018] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.072026] pnp: PnP ACPI: found 14 devices
[    0.072028] ACPI: ACPI bus type pnp unregistered
[    0.072032] PnPBIOS: Disabled by ACPI PNP
[    0.108591] Switching to clocksource acpi_pm
[    0.108637] pci 0000:00:11.0: BAR 6: assigned [mem 0x40000000-0x4007ffff pref]
[    0.108643] pci 0000:00:12.0: BAR 6: assigned [mem 0x40080000-0x400fffff pref]
[    0.108648] pci 0000:01:05.1: BAR 0: can't assign mem pref (size 0x10000000)
[    0.108651] pci 0000:01:05.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[    0.108655] pci 0000:01:05.1: BAR 1: assigned [mem 0xfde20000-0xfde2ffff]
[    0.108660] pci 0000:01:05.1: BAR 1: set to [mem 0xfde20000-0xfde2ffff] (PCI address [0xfde20000-0xfde2ffff])
[    0.108664] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.108667] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.108672] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.108675] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.108680] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[    0.108685] pci 0000:00:14.4:   bridge window [io  0xd000-0xdfff]
[    0.108692] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.108697] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.108719] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.108722] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.108725] pci_bus 0000:00: resource 6 [mem 0x40000000-0xefffffff]
[    0.108728] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
[    0.108731] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.108734] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.108737] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.108740] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.108743] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.108746] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[    0.108749] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.108752] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[    0.108755] pci_bus 0000:02: resource 6 [mem 0x40000000-0xefffffff]
[    0.108758] pci_bus 0000:02: resource 7 [mem 0xf0000000-0xffffffff]
[    0.108811] NET: Registered protocol family 2
[    0.108886] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.109246] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.110401] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.111008] TCP: Hash tables configured (established 131072 bind 65536)
[    0.111012] TCP reno registered
[    0.111017] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.111039] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.111166] NET: Registered protocol family 1
[    0.111181] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.111190] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.122878] Switched to NOHz mode on CPU #0
[    1.756020] pci 0000:00:13.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    1.756054] pci 0000:01:05.0: Boot video device
[    1.756065] PCI: CLS 32 bytes, default 64
[    1.756372] cpufreq-nforce2: No nForce2 chipset.
[    1.756542] audit: initializing netlink socket (disabled)
[    1.756560] type=2000 audit(1317387600.755:1): initialized
[    1.767839] Trying to unpack rootfs image as initramfs...
[    4.402629] Refined TSC clocksource calibration: 1999.772 MHz.
[    4.402636] Switching to clocksource tsc
[    4.403038] highmem bounce pool size: 64 pages
[    4.403044] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    4.405001] VFS: Disk quotas dquot_6.5.2
[    4.405066] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.405844] fuse init (API version 7.16)
[    4.405952] msgmni has been set to 1706
[    4.406217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.406246] io scheduler noop registered
[    4.406249] io scheduler deadline registered
[    4.406267] io scheduler cfq registered (default)
[    4.406437] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.406471] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.406656] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    4.406664] ACPI: Power Button [PWRB]
[    4.406728] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    4.406732] ACPI: Power Button [PWRF]
[    4.406798] ACPI: Fan [FAN] (on)
[    4.406971] ACPI: acpi_idle registered with cpuidle
[    4.408903] thermal LNXTHERM:00: registered as thermal_zone0
[    4.408906] ACPI: Thermal Zone [THRM] (-127 C)
[    4.408960] ERST: Table is not found!
[    4.409098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.429712] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.429747] isapnp: Scanning for PnP cards...
[    4.500601] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.500853] Linux agpgart interface v0.103
[    4.502492] brd: module loaded
[    4.503147] loop: module loaded
[    4.503274] i2c-core: driver [adp5520] using legacy suspend method
[    4.503277] i2c-core: driver [adp5520] using legacy resume method
[    4.503596] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    4.503600] PCI: setting IRQ 11 as level-triggered
[    4.503607] pata_acpi 0000:00:11.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    4.503765] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[    4.503769] PCI: setting IRQ 10 as level-triggered
[    4.503775] pata_acpi 0000:00:12.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
[    4.503878] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
[    4.503881] PCI: setting IRQ 3 as level-triggered
[    4.503887] pata_acpi 0000:00:14.1: PCI INT A -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3
[    4.504402] Fixed MDIO Bus: probed
[    4.504453] PPP generic driver version 2.4.2
[    4.504502] tun: Universal TUN/TAP device driver, 1.6
[    4.504505] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.504602] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.504695] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    4.504699] ehci_hcd 0000:00:13.2: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    4.504726] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    4.504777] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[    4.504843] ehci_hcd 0000:00:13.2: irq 11, io mem 0xfe02b000
[    4.548482] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    4.548620] hub 1-0:1.0: USB hub found
[    4.548628] hub 1-0:1.0: 8 ports detected
[    4.548744] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.548762] ohci_hcd 0000:00:13.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    4.548774] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    4.548812] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    4.548834] ohci_hcd 0000:00:13.0: irq 11, io mem 0xfe02d000
[    4.683775] hub 2-0:1.0: USB hub found
[    4.683784] hub 2-0:1.0: 4 ports detected
[    4.683867] ohci_hcd 0000:00:13.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    4.683878] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    4.683920] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    4.683939] ohci_hcd 0000:00:13.1: irq 11, io mem 0xfe02c000
[    4.818402] isapnp: No Plug & Play device found
[    4.818513] hub 3-0:1.0: USB hub found
[    4.818527] hub 3-0:1.0: 4 ports detected
[    4.818613] uhci_hcd: USB Universal Host Controller Interface driver
[    4.818728] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.821063] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.821068] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.821156] mousedev: PS/2 mouse device common for all mice
[    4.821300] rtc_cmos 00:03: RTC can wake from S4
[    4.821357] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.821383] rtc0: alarms up to one month, 242 bytes nvram
[    4.821481] device-mapper: uevent: version 1.0.3
[    4.821587] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    4.828069] device-mapper: multipath: version 1.2.0 loaded
[    4.828077] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.828254] EISA: Probing bus 0 at eisa.0
[    4.828258] EISA: Cannot allocate resource for mainboard
[    4.828261] Cannot allocate resource for EISA slot 1
[    4.828264] Cannot allocate resource for EISA slot 2
[    4.828266] Cannot allocate resource for EISA slot 3
[    4.828269] Cannot allocate resource for EISA slot 4
[    4.828271] Cannot allocate resource for EISA slot 5
[    4.828274] Cannot allocate resource for EISA slot 6
[    4.828276] Cannot allocate resource for EISA slot 7
[    4.828279] Cannot allocate resource for EISA slot 8
[    4.828281] EISA: Detected 0 cards.
[    4.828371] cpuidle: using governor ladder
[    4.828373] cpuidle: using governor menu
[    4.828668] TCP cubic registered
[    4.828819] NET: Registered protocol family 10
[    4.829425] NET: Registered protocol family 17
[    4.829450] Registering the dns_resolver key type
[    4.829479] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[    4.841927] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[    4.841929] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[    4.852098] Using IPI No-Shortcut mode
[    4.852288] PM: Hibernation image not present or could not be loaded.
[    4.852304] registered taskstats version 1
[    4.852564]   Magic number: 11:986:987
[    4.852704] rtc_cmos 00:03: setting system clock to 2011-09-30 13:00:04 UTC (1317387604)
[    4.852709] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.852711] EDD information not available.
[    5.528323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    5.535457] Freeing initrd memory: 13076k freed
[    5.551336] Freeing unused kernel memory: 700k freed
[    5.552229] Write protecting the kernel text: 5192k
[    5.552268] Write protecting the kernel read-only data: 2148k
[    5.596877] <30>udev[66]: starting version 167
[    5.825666] sata_sil 0000:00:11.0: version 2.4
[    5.826347] Floppy drive(s): fd0 is 1.44M
[    5.856085] scsi0 : sata_sil
[    5.859432] scsi1 : sata_sil
[    5.859512] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 11
[    5.859517] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 11
[    5.860319] FDC 0 is a post-1991 82077
[    5.862844] scsi2 : sata_sil
[    5.864527] scsi3 : sata_sil
[    5.864613] ata3: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 10
[    5.864618] ata4: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 10
[    5.873964] scsi4 : pata_atiixp
[    5.876371] scsi5 : pata_atiixp
[    5.877132] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[    5.877136] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[    5.892902] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    5.892938] 8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    5.930752] [drm] Initialized drm 1.1.0 20060810
[    6.042505] ata5.00: HPA detected: current 302246910, native 312581808
[    6.042512] ata5.00: ATA-6: WDC WD1600BB-55GUC0, 08.02D08, max UDMA/100
[    6.042515] ata5.00: 302246910 sectors, multi 16: LBA48
[    6.048542] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
[    6.048547] ata6.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[    6.057962] ata5.00: configured for UDMA/100
[    6.064483] ata6.00: configured for UDMA/66
[    6.080485] ata6.01: configured for UDMA/33
[    6.176026] ata1: SATA link down (SStatus 0 SControl 310)
[    6.184026] ata3: SATA link down (SStatus 0 SControl 310)
[    6.496024] ata2: SATA link down (SStatus 0 SControl 310)
[    6.816026] ata4: SATA link down (SStatus 0 SControl 310)
[    6.816189] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1600BB-55G 08.0 PQ: 0 ANSI: 5
[    6.816416] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    6.816796] sd 4:0:0:0: [sda] 302246910 512-byte logical blocks: (154 GB/144 GiB)
[    6.816848] sd 4:0:0:0: [sda] Write Protect is off
[    6.816852] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.816875] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.820025] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL00 PQ: 0 ANSI: 5
[    6.825732] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.825736] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.825865] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    6.825951] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    6.837188] scsi 5:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[    6.845279] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    6.845414] sr 5:0:1:0: Attached scsi CD-ROM sr1
[    6.845494] sr 5:0:1:0: Attached scsi generic sg2 type 5
[    6.849069]  sda: sda1 sda2 < >
[    6.849073] sda: partition table partially beyond EOD, enabling native capacity
[    6.849124] ata5: soft resetting link
[    7.020541] ata5.00: n_sectors mismatch 302246910 != 312581808
[    7.020544] ata5.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[    7.037776] ata5.00: configured for UDMA/100
[    7.037781] ata5: EH complete
[    7.037855] sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    7.038021] sda: detected capacity change from 154750417920 to 160041885696
[    7.075928]  sda: sda1 sda2 < sda5 >
[    7.076400] sd 4:0:0:0: [sda] Attached SCSI disk
[    7.092137] 8139too: 8139too Fast Ethernet driver 0.9.28
[    7.092344] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
[    7.092348] PCI: setting IRQ 5 as level-triggered
[    7.092356] 8139too 0000:02:0b.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5
[    7.098677] 8139too 0000:02:0b.0: eth0: RealTek RTL8139 at 0xde00, 00:01:2e:10:a1:2f, IRQ 5
[    7.164776] [drm] radeon defaulting to kernel modesetting.
[    7.164782] [drm] radeon kernel modesetting enabled.
[    7.165010] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    7.165016] radeon 0000:01:05.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    7.168403] [drm] initializing kernel modesetting (RS480 0x1002:0x5974).
[    7.168438] [drm] register mmio base: 0xFDEF0000
[    7.168440] [drm] register mmio size: 65536
[    7.169157] [drm] Generation 2 PCI interface, using max accessible memory
[    7.169164] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
[    7.169168] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    7.169185] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.169187] [drm] Driver supports precise vblank timestamp query.
[    7.169199] [drm] radeon: irq initialized.
[    7.169362] [drm] Detected VRAM RAM=128M, BAR=256M
[    7.169370] [drm] RAM width 128bits DDR
[    7.169482] [TTM] Zone  kernel: Available graphics memory: 443844 kiB.
[    7.169484] [TTM] Zone highmem: Available graphics memory: 447400 kiB.
[    7.169487] [TTM] Initializing pool allocator.
[    7.169513] [drm] radeon: 128M of VRAM memory ready
[    7.169515] [drm] radeon: 512M of GTT memory ready.
[    7.169606] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    7.176669] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[    7.183015] radeon 0000:01:05.0: WB enabled
[    7.183628] [drm] Loading R300 Microcode
[    7.188193] [drm] radeon: ring at 0x0000000040001000
[    7.188218] [drm] ring test succeeded in 3 usecs
[    7.188360] [drm] radeon: ib pool ready.
[    7.188470] [drm] ib test succeeded in 0 usecs
[    7.189711] [drm] Radeon Display Connectors
[    7.189713] [drm] Connector 0:
[    7.189715] [drm]   VGA
[    7.189718] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[    7.189720] [drm]   Encoders:
[    7.189722] [drm]     CRT1: INTERNAL_DAC2
[    7.189724] [drm] Connector 1:
[    7.189726] [drm]   S-video
[    7.189727] [drm]   Encoders:
[    7.189729] [drm]     TV1: INTERNAL_DAC2
[    7.339907] [drm] fb mappable at 0xD0040000
[    7.339912] [drm] vram apper at 0xD0000000
[    7.339914] [drm] size 5242880
[    7.339916] [drm] fb depth is 24
[    7.339918] [drm]    pitch is 5120
[    7.399649] Console: switching to colour frame buffer device 160x64
[    7.408710] fb0: radeondrmfb frame buffer device
[    7.408712] drm: registered panic notifier
[    7.408842] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[    7.418425] spurious 8259A interrupt: IRQ7.
[    8.575313] Btrfs loaded
[    8.583894] xor: automatically using best checksumming function: pIII_sse
[    8.600004]    pIII_sse  :  6016.000 MB/sec
[    8.600008] xor: using function: pIII_sse (6016.000 MB/sec)
[    8.604236] device-mapper: dm-raid45: initialized v0.2594b
[    9.026817] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.427994] ISO 9660 Extensions: Microsoft Joliet Level 3
[   10.460712] ISO 9660 Extensions: RRIP_1991A
[   10.582056] aufs 2.1-standalone.tree-38-rcN-20110207
[   10.638563] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   52.979142] Adding 979964k swap on /dev/sda5.  Priority:-1 extents:1 across:979964k
[   55.456206] <30>udev[1159]: starting version 167
[   59.677950] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   59.898558] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
[   60.197621] psmouse serio1: ID: 10 00 64
[   60.856436] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[   61.026608] eth0: link down
[   61.032177] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   61.228326] parport_pc 00:09: reported by Plug and Play ACPI
[   61.228400] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   61.774231] cfg80211: Calling CRDA to update world regulatory domain
[   62.526287] ppdev: user-space parallel port driver
[   65.151427] rt2800pci 0000:02:05.0: PCI INT A -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3
[   65.160356] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   65.160363] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160366] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   65.160370] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160372] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   65.160376] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160379] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   65.160382] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160384] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   65.160388] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160390] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   65.160393] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160396] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   65.160399] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160402] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   65.160405] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160408] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   65.160411] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160413] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   65.160417] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160419] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   65.160422] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160425] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   65.160428] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160431] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   65.160434] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.160437] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   65.160440] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
[   65.806669] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   65.808760] Registered led device: rt2800pci-phy0::radio
[   65.808871] Registered led device: rt2800pci-phy0::assoc
[   65.808957] Registered led device: rt2800pci-phy0::quality
[   65.933542] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   65.933550] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933553] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   65.933557] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933560] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   65.933563] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933566] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   65.933569] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933572] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   65.933575] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933577] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   65.933581] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933583] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   65.933586] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933589] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   65.933592] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933595] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   65.933598] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933601] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   65.933604] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933607] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   65.933610] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933613] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   65.933616] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933618] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   65.933622] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933624] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   65.933627] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   65.933631] cfg80211: World regulatory domain updated:
[   65.933633] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   65.933636] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   65.933640] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   65.933643] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   65.933646] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   65.933649] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   66.697427] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[   66.700799] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   66.723666] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   69.787967] lp0: using parport0 (interrupt-driven). [ /code ]



 

[Liber]

1B, lsusb bez flashdisku:

Kód: [Vybrat]

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
1C, lsusb s flashdiskem:

Kód: [Vybrat]

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1307:0163 Transcend Information, Inc. 256MB/512MB/1GB Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

2,s aktivní wifi-kartou dmesg:

Kód: [Vybrat]

[    0.067899] pnp 00:00: [bus 00-ff]
[    0.067904] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.067908] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.067910] pnp 00:00: [io  0x0d00-0xffff window]
[    0.067913] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.067916] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.067919] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.067989] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.068236] pnp 00:01: [io  0x0140-0x015f]
[    0.068238] pnp 00:01: [io  0x0228-0x022f]
[    0.068241] pnp 00:01: [io  0x04d6]
[    0.068243] pnp 00:01: [io  0x0c00-0x0c01]
[    0.068245] pnp 00:01: [io  0x0c14]
[    0.068248] pnp 00:01: [io  0x0c50-0x0c52]
[    0.068250] pnp 00:01: [io  0x0c6c-0x0c6d]
[    0.068253] pnp 00:01: [io  0x0c6f]
[    0.068255] pnp 00:01: [io  0x0cd4-0x0cdf]
[    0.068257] pnp 00:01: [io  0x4000-0x40fe]
[    0.068260] pnp 00:01: [io  0x4210-0x4217]
[    0.068267] pnp 00:01: [mem 0x00000000-0x00000fff window]
[    0.068270] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[    0.068285] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:11.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[    0.068296] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:00:12.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[    0.068325] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.068331] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.068336] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:05.1 BAR 1 [mem 0x00000000-0x0000ffff]
[    0.068374] system 00:01: [io  0x0140-0x015f] has been reserved
[    0.068378] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.068381] system 00:01: [io  0x04d6] has been reserved
[    0.068384] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.068387] system 00:01: [io  0x0c14] has been reserved
[    0.068390] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.068393] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.068396] system 00:01: [io  0x0c6f] has been reserved
[    0.068399] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.068403] system 00:01: [io  0x4000-0x40fe] has been reserved
[    0.068406] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.068410] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.068414] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.068534] pnp 00:02: [dma 4]
[    0.068537] pnp 00:02: [io  0x0000-0x000f]
[    0.068539] pnp 00:02: [io  0x0080-0x0090]
[    0.068542] pnp 00:02: [io  0x0094-0x009f]
[    0.068544] pnp 00:02: [io  0x00c0-0x00df]
[    0.068575] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.068586] pnp 00:03: [io  0x0070-0x0073]
[    0.068591] pnp 00:03: [irq 8]
[    0.068622] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.068631] pnp 00:04: [io  0x0061]
[    0.068667] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.068676] pnp 00:05: [io  0x00f0-0x00ff]
[    0.068678] pnp 00:05: [irq 13]
[    0.068718] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.068751] pnp 00:06: [io  0x0010-0x001f]
[    0.068753] pnp 00:06: [io  0x0022-0x003f]
[    0.068755] pnp 00:06: [io  0x0044-0x005f]
[    0.068758] pnp 00:06: [io  0x0062-0x0063]
[    0.068760] pnp 00:06: [io  0x0065-0x006f]
[    0.068763] pnp 00:06: [io  0x0074-0x007f]
[    0.068765] pnp 00:06: [io  0x0091-0x0093]
[    0.068767] pnp 00:06: [io  0x00a2-0x00bf]
[    0.068770] pnp 00:06: [io  0x00e0-0x00ef]
[    0.068772] pnp 00:06: [io  0x04d0-0x04d1]
[    0.068775] pnp 00:06: [io  0x0220-0x0225]
[    0.068834] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.068838] system 00:06: [io  0x0220-0x0225] has been reserved
[    0.068841] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.069000] pnp 00:07: [io  0x03f0-0x03f5]
[    0.069003] pnp 00:07: [io  0x03f7]
[    0.069005] pnp 00:07: [irq 6]
[    0.069008] pnp 00:07: [dma 2]
[    0.069057] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.069257] pnp 00:08: [io  0x03f8-0x03ff]
[    0.069260] pnp 00:08: [irq 4]
[    0.069319] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.069704] pnp 00:09: [io  0x0378-0x037f]
[    0.069707] pnp 00:09: [irq 7]
[    0.069762] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.069874] pnp 00:0a: [irq 12]
[    0.069909] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.069936] pnp 00:0b: [io  0x0060]
[    0.069938] pnp 00:0b: [io  0x0064]
[    0.069940] pnp 00:0b: [irq 1]
[    0.069976] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.070007] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    0.070059] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.070063] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.070245] pnp 00:0d: [mem 0x000d0000-0x000d3fff]
[    0.070248] pnp 00:0d: [mem 0x000d5000-0x000d7fff]
[    0.070250] pnp 00:0d: [mem 0x000f0000-0x000fbfff]
[    0.070253] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.070256] pnp 00:0d: [mem 0x37f00000-0x37ffffff]
[    0.070258] pnp 00:0d: [mem 0x37ef0000-0x37efffff]
[    0.070261] pnp 00:0d: [mem 0xffff0000-0xffffffff]
[    0.070264] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.070266] pnp 00:0d: [mem 0x00100000-0x37eeffff]
[    0.070269] pnp 00:0d: [mem 0x38000000-0x3fffffff]
[    0.070278] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.070281] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.070284] pnp 00:0d: [mem 0xfff80000-0xfffeffff]
[    0.070310] pnp 00:0d: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.070315] pnp 00:0d: disabling [mem 0x000d5000-0x000d7fff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.070320] pnp 00:0d: disabling [mem 0x000f0000-0x000fbfff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.070324] pnp 00:0d: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.070329] pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.070334] pnp 00:0d: disabling [mem 0x00100000-0x37eeffff] because it overlaps 0000:01:05.1 BAR 0 [mem 0x00000000-0x0fffffff pref]
[    0.070377] system 00:0d: [mem 0x37f00000-0x37ffffff] could not be reserved
[    0.070380] system 00:0d: [mem 0x37ef0000-0x37efffff] could not be reserved
[    0.070384] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[    0.070388] system 00:0d: [mem 0x38000000-0x3fffffff] has been reserved
[    0.070391] system 00:0d: [mem 0xfec00000-0xfec00fff] has been reserved
[    0.070395] system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.070398] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.070402] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.070410] pnp: PnP ACPI: found 14 devices
[    0.070411] ACPI: ACPI bus type pnp unregistered
[    0.070416] PnPBIOS: Disabled by ACPI PNP
[    0.107141] Switching to clocksource acpi_pm
[    0.107188] pci 0000:00:11.0: BAR 6: assigned [mem 0x40000000-0x4007ffff pref]
[    0.107194] pci 0000:00:12.0: BAR 6: assigned [mem 0x40080000-0x400fffff pref]
[    0.107199] pci 0000:01:05.1: BAR 0: can't assign mem pref (size 0x10000000)
[    0.107203] pci 0000:01:05.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[    0.107206] pci 0000:01:05.1: BAR 1: assigned [mem 0xfde20000-0xfde2ffff]
[    0.107211] pci 0000:01:05.1: BAR 1: set to [mem 0xfde20000-0xfde2ffff] (PCI address [0xfde20000-0xfde2ffff])
[    0.107217] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.107221] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.107225] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.107229] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.107234] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[    0.107238] pci 0000:00:14.4:   bridge window [io  0xd000-0xdfff]
[    0.107245] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.107251] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.107273] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.107276] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.107279] pci_bus 0000:00: resource 6 [mem 0x40000000-0xefffffff]
[    0.107282] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
[    0.107286] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.107289] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.107292] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.107295] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.107298] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.107301] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[    0.107304] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.107307] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[    0.107311] pci_bus 0000:02: resource 6 [mem 0x40000000-0xefffffff]
[    0.107314] pci_bus 0000:02: resource 7 [mem 0xf0000000-0xffffffff]
[    0.107368] NET: Registered protocol family 2
[    0.107448] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.107807] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.107807] Switched to NOHz mode on CPU #0
[    0.107807] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.107807] TCP: Hash tables configured (established 131072 bind 65536)
[    0.107807] TCP reno registered
[    0.107807] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.107807] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.107807] NET: Registered protocol family 1
[    0.107807] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.107807] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    1.760020] pci 0000:00:13.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    1.760056] pci 0000:01:05.0: Boot video device
[    1.760066] PCI: CLS 32 bytes, default 64
[    1.760396] cpufreq-nforce2: No nForce2 chipset.
[    1.760573] audit: initializing netlink socket (disabled)
[    1.760592] type=2000 audit(1317388175.759:1): initialized
[    1.771901] Trying to unpack rootfs image as initramfs...
[    1.788774] highmem bounce pool size: 64 pages
[    1.788785] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.794222] VFS: Disk quotas dquot_6.5.2
[    1.794302] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.800268] fuse init (API version 7.16)
[    1.800451] msgmni has been set to 1707
[    1.804514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.804551] io scheduler noop registered
[    1.804554] io scheduler deadline registered
[    1.804574] io scheduler cfq registered (default)
[    1.804757] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.804794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.804997] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.805007] ACPI: Power Button [PWRB]
[    1.805070] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.805073] ACPI: Power Button [PWRF]
[    1.805139] ACPI: Fan [FAN] (on)
[    1.805293] ACPI: acpi_idle registered with cpuidle
[    1.806848] thermal LNXTHERM:00: registered as thermal_zone0
[    1.806851] ACPI: Thermal Zone [THRM] (-127 C)
[    1.806928] ERST: Table is not found!
[    1.807045] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.827701] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.832165] isapnp: Scanning for PnP cards...
[    1.922147] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.944715] Linux agpgart interface v0.103
[    1.946503] brd: module loaded
[    1.947209] loop: module loaded
[    1.947340] i2c-core: driver [adp5520] using legacy suspend method
[    1.947343] i2c-core: driver [adp5520] using legacy resume method
[    1.947664] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    1.947667] PCI: setting IRQ 11 as level-triggered
[    1.947676] pata_acpi 0000:00:11.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    1.947833] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[    1.947836] PCI: setting IRQ 10 as level-triggered
[    1.947842] pata_acpi 0000:00:12.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
[    1.947940] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
[    1.947943] PCI: setting IRQ 3 as level-triggered
[    1.947949] pata_acpi 0000:00:14.1: PCI INT A -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3
[    1.952725] Fixed MDIO Bus: probed
[    1.952780] PPP generic driver version 2.4.2
[    1.952875] tun: Universal TUN/TAP device driver, 1.6
[    1.952878] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.953005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.953178] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    1.953184] ehci_hcd 0000:00:13.2: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    1.953215] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.953265] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[    1.953347] ehci_hcd 0000:00:13.2: irq 11, io mem 0xfe02b000
[    1.996993] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.997153] hub 1-0:1.0: USB hub found
[    1.997158] hub 1-0:1.0: 8 ports detected
[    1.997268] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.997286] ohci_hcd 0000:00:13.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    1.997297] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.997336] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    1.997357] ohci_hcd 0000:00:13.0: irq 11, io mem 0xfe02d000
[    2.080290] hub 2-0:1.0: USB hub found
[    2.080304] hub 2-0:1.0: 4 ports detected
[    2.080423] ohci_hcd 0000:00:13.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    2.080454] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    2.080503] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    2.080534] ohci_hcd 0000:00:13.1: irq 11, io mem 0xfe02c000
[    2.160493] hub 3-0:1.0: USB hub found
[    2.160507] hub 3-0:1.0: 4 ports detected
[    2.160628] uhci_hcd: USB Universal Host Controller Interface driver
[    2.160778] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.163502] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.163511] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.163675] mousedev: PS/2 mouse device common for all mice
[    2.163850] rtc_cmos 00:03: RTC can wake from S4
[    2.163919] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.163945] rtc0: alarms up to one month, 242 bytes nvram
[    2.164087] device-mapper: uevent: version 1.0.3
[    2.164185] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    2.167595] device-mapper: multipath: version 1.2.0 loaded
[    2.167601] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.167793] EISA: Probing bus 0 at eisa.0
[    2.167797] EISA: Cannot allocate resource for mainboard
[    2.167800] Cannot allocate resource for EISA slot 1
[    2.167803] Cannot allocate resource for EISA slot 2
[    2.167805] Cannot allocate resource for EISA slot 3
[    2.167808] Cannot allocate resource for EISA slot 4
[    2.167810] Cannot allocate resource for EISA slot 5
[    2.167813] Cannot allocate resource for EISA slot 6
[    2.167815] Cannot allocate resource for EISA slot 7
[    2.167818] Cannot allocate resource for EISA slot 8
[    2.167820] EISA: Detected 0 cards.
[    2.171500] cpuidle: using governor ladder
[    2.171506] cpuidle: using governor menu
[    2.171862] TCP cubic registered
[    2.172080] NET: Registered protocol family 10
[    2.172680] NET: Registered protocol family 17
[    2.172717] Registering the dns_resolver key type
[    2.172744] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[    2.185324] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[    2.185326] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[    2.185413] Using IPI No-Shortcut mode
[    2.185585] PM: Hibernation image not present or could not be loaded.
[    2.185601] registered taskstats version 1
[    2.185863]   Magic number: 11:268:181
[    2.186012] rtc_cmos 00:03: setting system clock to 2011-09-30 13:09:37 UTC (1317388177)
[    2.186016] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.186018] EDD information not available.
[    2.201724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    2.395860] isapnp: No Plug & Play device found
[    2.567210] Freeing initrd memory: 12560k freed
[    2.582890] Freeing unused kernel memory: 700k freed
[    2.583788] Write protecting the kernel text: 5192k
[    2.583827] Write protecting the kernel read-only data: 2148k
[    2.611009] <30>udev[60]: starting version 167
[    2.768088] Refined TSC clocksource calibration: 1999.772 MHz.
[    2.768100] Switching to clocksource tsc
[    2.778340] sata_sil 0000:00:11.0: version 2.4
[    2.834869] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.834908] 8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    2.848048] scsi0 : sata_sil
[    2.850284] scsi1 : sata_sil
[    2.850364] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 11
[    2.850370] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 11
[    2.852979] scsi2 : sata_sil
[    2.854810] scsi3 : sata_sil
[    2.854900] ata3: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 10
[    2.854906] ata4: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 10
[    2.857214] scsi4 : pata_atiixp
[    2.858490] scsi5 : pata_atiixp
[    2.859207] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[    2.859210] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[    2.866708] Floppy drive(s): fd0 is 1.44M
[    2.884381] FDC 0 is a post-1991 82077
[    2.893600] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.893811] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
[    2.893816] PCI: setting IRQ 5 as level-triggered
[    2.893826] 8139too 0000:02:0b.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5
[    2.895303] 8139too 0000:02:0b.0: eth0: RealTek RTL8139 at 0xde00, 00:01:2e:10:a1:2f, IRQ 5
[    3.026494] ata5.00: HPA detected: current 302246910, native 312581808
[    3.026502] ata5.00: ATA-6: WDC WD1600BB-55GUC0, 08.02D08, max UDMA/100
[    3.026506] ata5.00: 302246910 sectors, multi 16: LBA48
[    3.032714] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
[    3.032720] ata6.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[    3.041988] ata5.00: configured for UDMA/100
[    3.048485] ata6.00: configured for UDMA/66
[    3.064483] ata6.01: configured for UDMA/33
[    3.168026] ata1: SATA link down (SStatus 0 SControl 310)
[    3.176029] ata3: SATA link down (SStatus 0 SControl 310)
[    3.488025] ata2: SATA link down (SStatus 0 SControl 310)
[    3.808024] ata4: SATA link down (SStatus 0 SControl 310)
[    3.808203] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1600BB-55G 08.0 PQ: 0 ANSI: 5
[    3.808448] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    3.808629] sd 4:0:0:0: [sda] 302246910 512-byte logical blocks: (154 GB/144 GiB)
[    3.808684] sd 4:0:0:0: [sda] Write Protect is off
[    3.808688] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.808712] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.812361] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL00 PQ: 0 ANSI: 5
[    3.818068] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.818072] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.818209] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    3.818294] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    3.823474] scsi 5:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[    3.827373] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    3.827509] sr 5:0:1:0: Attached scsi CD-ROM sr1
[    3.827589] sr 5:0:1:0: Attached scsi generic sg2 type 5
[    3.836845]  sda: sda1 sda2 < >
[    3.836849] sda: partition table partially beyond EOD, enabling native capacity
[    3.836897] ata5: soft resetting link
[    4.008544] ata5.00: n_sectors mismatch 302246910 != 312581808
[    4.008547] ata5.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[    4.025757] ata5.00: configured for UDMA/100
[    4.025762] ata5: EH complete
[    4.025831] sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    4.026004] sda: detected capacity change from 154750417920 to 160041885696
[    4.063701]  sda: sda1 sda2 < sda5 >
[    4.064203] sd 4:0:0:0: [sda] Attached SCSI disk
[    4.523516] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    4.523521] EXT4-fs (sda1): write access will be enabled during recovery
[    4.609948] EXT4-fs (sda1): recovery complete
[    4.611040] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   17.598134] Adding 979964k swap on /dev/sda5.  Priority:-1 extents:1 across:979964k
[   17.775841] <30>udev[354]: starting version 167
[   17.822594] lp: driver loaded but no devices found
[   17.921151] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   18.073262] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
[   18.183753] type=1400 audit(1317388193.492:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=500 comm="apparmor_parser"
[   18.190023] type=1400 audit(1317388193.500:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser"
[   18.190306] type=1400 audit(1317388193.500:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser"
[   18.329477] Disabling lock debugging due to kernel taint
[   18.343127] parport_pc 00:09: reported by Plug and Play ACPI
[   18.343197] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   18.393279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.559078] eth0: link down
[   18.559489] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.576948] lp0: using parport0 (interrupt-driven).
[   18.745228] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[   18.837075] psmouse serio1: ID: 10 00 64
[   19.024694] type=1400 audit(1317388194.336:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=660 comm="apparmor_parser"
[   19.031407] type=1400 audit(1317388194.340:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=661 comm="apparmor_parser"
[   19.038023] type=1400 audit(1317388194.348:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=661 comm="apparmor_parser"
[   19.038328] type=1400 audit(1317388194.348:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=661 comm="apparmor_parser"
[   19.062901] type=1400 audit(1317388194.372:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=663 comm="apparmor_parser"
[   19.075959] type=1400 audit(1317388194.384:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=663 comm="apparmor_parser"
[   19.083551] type=1400 audit(1317388194.392:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=663 comm="apparmor_parser"
[   19.115196] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'ExEventObjectType'
[   19.115542] ndiswrapper: driver lw3x2_xpx86 (Sweex Europe BV,01/18/2011, 3.01.13.0001) loaded
[   19.116433] ndiswrapper 0000:02:05.0: PCI INT A -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3
[   19.183620] [drm] Initialized drm 1.1.0 20060810
[   19.501712] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[   19.670608] ppdev: user-space parallel port driver
[   19.687857] ndiswrapper: using IRQ 3
[   20.041577] [drm] radeon defaulting to kernel modesetting.
[   20.041583] [drm] radeon kernel modesetting enabled.
[   20.041817] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   20.041823] radeon 0000:01:05.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   20.066529] [drm] initializing kernel modesetting (RS480 0x1002:0x5974).
[   20.066572] [drm] register mmio base: 0xFDEF0000
[   20.066574] [drm] register mmio size: 65536
[   20.067322] [drm] Generation 2 PCI interface, using max accessible memory
[   20.067329] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
[   20.067334] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   20.067345] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   20.067347] [drm] Driver supports precise vblank timestamp query.
[   20.067361] [drm] radeon: irq initialized.
[   20.067517] [drm] Detected VRAM RAM=128M, BAR=256M
[   20.067524] [drm] RAM width 128bits DDR
[   20.081198] [TTM] Zone  kernel: Available graphics memory: 443844 kiB.
[   20.081203] [TTM] Zone highmem: Available graphics memory: 447400 kiB.
[   20.081206] [TTM] Initializing pool allocator.
[   20.081235] [drm] radeon: 128M of VRAM memory ready
[   20.081237] [drm] radeon: 512M of GTT memory ready.
[   20.081262] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   20.088971] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[   20.095844] radeon 0000:01:05.0: WB enabled
[   20.098513] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   20.100744] [drm] Loading R300 Microcode
[   20.104392] [drm] radeon: ring at 0x0000000040001000
[   20.104419] [drm] ring test succeeded in 2 usecs
[   20.104552] [drm] radeon: ib pool ready.
[   20.104775] [drm] ib test succeeded in 0 usecs
[   20.121309] [drm] Radeon Display Connectors
[   20.121314] [drm] Connector 0:
[   20.121316] [drm]   VGA
[   20.121319] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[   20.121321] [drm]   Encoders:
[   20.121325] [drm]     CRT1: INTERNAL_DAC2
[   20.121327] [drm] Connector 1:
[   20.121329] [drm]   S-video
[   20.121330] [drm]   Encoders:
[   20.121332] [drm]     TV1: INTERNAL_DAC2
[   20.237271] wlan0: ethernet device 00:16:0a:28:46:5b using serialized NDIS driver: lw3x2_xpx86, version: 0x0, NDIS version: 0x500, vendor: 'IEEE 802.11 Wireless Card.', 1814:3060.5.conf
[   20.237313] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   20.239386] usbcore: registered new interface driver ndiswrapper
[   20.301657] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.356442] [drm] fb mappable at 0xD0040000
[   20.356446] [drm] vram apper at 0xD0000000
[   20.356448] [drm] size 5242880
[   20.356450] [drm] fb depth is 24
[   20.356452] [drm]    pitch is 5120
[   20.356738] fbcon: radeondrmfb (fb0) is primary device
[   20.357986] Console: switching to colour frame buffer device 160x64
[   20.358041] fb0: radeondrmfb frame buffer device
[   20.358043] drm: registered panic notifier
[   20.358056] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[   21.298591] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   26.627524] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   31.852451] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   42.544008] wlan0: no IPv6 routers present

3A,lsusb bez flashky s aktivní wifi:

Kód: [Vybrat]

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

3B, lsusb s flashkou a aktivní wifi: (flashdisk se mezi disky nehlásí a není nikde vidět)

Kód: [Vybrat]

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1307:0163 Transcend Information, Inc. 256MB/512MB/1GB Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[/code]

Předem děkuji za pomoc.