============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid deef5d9d-ef70-4cba-be66-38eda31e0191 root
set
prefix=($root)/boot/grub---------------------------------------------------
-----------------------------.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for on this drive.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 5 for .
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/core.img
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM /boot/grub/core.img
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdb5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sdb5
and looks at sector 137722248 of the same hard drive
for core.img. core.img is at this location and looks
for on this drive.
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows XP: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
hlav: 255, sektorů na stopu: 63, cylindrů: 19 457, celkem 312 581 808 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 312,560,639 312,560,577 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 80.0 GB, 80032038912 bytes
hlav: 255, sektorů na stopu: 63, cylindrů: 9 730, celkem 156 312 576 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 123,088,951 123,088,889 7 NTFS / exFAT / HPFS
/dev/sdb2 123,090,942 156,311,551 33,220,610 5 Extended
/dev/sdb5 123,090,944 154,826,751 31,735,808 83 Linux
/dev/sdb6 154,828,800 156,311,551 1,482,752 82 Linux swap / Solaris
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 8 019 MB, 8 019 509 248 bajtů
hlav: 20, sektorů na stopu: 16, cylindrů: 48 947, celkem 15 663 104 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 80 15,663,103 15,663,024 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 022823072822F975 ntfs
/dev/sdb1 68740F11740EE1A4 ntfs
/dev/sdb5 deef5d9d-ef70-4cba-be66-38eda31e0191 ext4
/dev/sdb6 5f745bbf-5159-4e15-9650-fceaf0cc9d48 swap
/dev/sdc1 90AB-36AC vfat E
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdb5 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sdc1 /media/E vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/core.img 1
================================ sdb1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/core.img 1
=========================== sdb5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="10"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
set locale_dir=($root)/boot/grub/locale
set lang=cs_CZ
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=12
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 ro vga=769 quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 ro recovery nomodeset vga=769
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 ro vga=769 quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
echo 'Loading Linux 2.6.38-11-generic ...'
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 ro recovery nomodeset vga=769
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 ro vga=769 quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 ro recovery nomodeset vga=769
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 ro vga=769 quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
echo 'Loading Linux 2.6.35-28-generic ...'
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 ro recovery nomodeset vga=769
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-28-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root deef5d9d-ef70-4cba-be66-38eda31e0191
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 68740F11740EE1A4
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb5 during installation
UUID=deef5d9d-ef70-4cba-be66-38eda31e0191 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb6 during installation
UUID=5f745bbf-5159-4e15-9650-fceaf0cc9d48 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sdb5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-2.6.35-28-generic 2
= boot/initrd.img-2.6.38-11-generic 1
= boot/initrd.img-2.6.38-8-generic 2
= boot/initrd.img-3.0.0-12-generic 2
= boot/vmlinuz-2.6.35-28-generic 1
= boot/vmlinuz-2.6.38-11-generic 1
= boot/vmlinuz-2.6.38-8-generic 1
= boot/vmlinuz-3.0.0-12-generic 2
= initrd.img 2
= initrd.img.old 1
= vmlinuz 2
= vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdb2
00000000 1d b3 51 6b 9f 61 88 04 33 d1 69 46 0f 17 65 57 |..Qk.a..3.iF..eW|
00000010 fb 1c 46 81 b7 1e 4a 49 f6 5c 86 1a 8a 59 27 3b |..F...JI.\...Y';|
00000020 fc 14 55 6d 94 71 b7 0e 2e c5 57 ba a9 a4 63 2b |..Um.q....W...c+|
00000030 06 97 2f c7 21 5d 28 94 46 7c 9f e1 58 3f 60 e9 |../.!](.F|..X?`.|
00000040 94 01 86 6e 4c 91 c5 4d 94 88 da 6c 83 da ff 00 |...nL..M...l....|
00000050 b9 b6 49 fc ea 05 1a 47 9e d2 29 bd 79 a0 c9 33 |..I....G..).y..3|
00000060 4c 60 84 6e ee 67 0f 40 5a 23 55 2f 3b 18 36 95 |L`.n.g.@Z#U/;.6.|
00000070 9b a3 21 58 ce f7 a3 5b 98 1e 53 23 0e 00 c2 69 |..!X...[..S#...i|
00000080 f1 83 35 79 eb ce af 1f ed 4a a7 c5 de a3 2e a8 |..5y.....J......|
00000090 f6 9b 36 da e0 57 49 b5 b9 ef 00 1b 0f 22 ab c8 |..6..WI......"..|
000000a0 c6 9c b1 fd 56 ff 6f 91 65 54 ff 14 d3 7b 15 3d |....V.o.eT...{.=|
000000b0 51 e5 31 12 c9 e3 92 c9 18 ed a8 99 ab 7b 17 64 |Q.1..........{.d|
000000c0 20 ac 26 ee a2 e1 32 bc 84 58 08 57 d7 25 7a c7 | .&...2..X.W.%z.|
000000d0 82 c7 0f e3 6e 0c 38 1e 40 bc 17 ea 72 e1 00 df |....n.8.@...r...|
000000e0 d5 cb 37 b3 0f b9 dc 19 cd c0 96 57 9b 3f 0c 8f |..7........W.?..|
000000f0 87 c4 73 ad 4c 5c 30 10 8a ee f2 55 5f 62 c4 cd |..s.L\0....U_b..|
00000100 6c 8e 2a d8 95 28 39 5a a7 60 aa ef d3 4a 5b 0c |l.*..(9Z.`...J[.|
00000110 4f 68 3d de c0 07 2e a3 2a 73 44 81 0a e5 89 0e |Oh=.....*sD.....|
00000120 1e 67 e1 71 94 1c 68 eb df 8e 28 59 49 5e e6 40 |.g.q..h...(YI^.@|
00000130 82 76 38 d1 6a 8f ff 4e f2 92 c6 a1 46 16 10 64 |.v8.j..N....F..d|
00000140 f4 aa 6c f1 b2 c4 dd 4b f9 e1 ed 6b e4 6e 12 5f |..l....K...k.n._|
00000150 eb a3 07 26 f5 56 f7 08 3c d5 e6 d8 2f 3d 5d 57 |...&.V..<.../=]W|
00000160 66 69 93 0c 9a cf d5 0d 57 2f c5 e6 e1 13 e9 ee |fi......W/......|
00000170 b9 ba d2 44 cc 37 d9 f4 c6 9a bd b4 97 87 13 38 |...D.7.........8|
00000180 bb 55 a7 e2 6b c6 ae 34 75 08 ca dd ca de c8 ba |.U..k..4u.......|
00000190 8c be 96 66 1d a4 94 5b 77 72 c1 58 27 28 5c 42 |...f...[wr.X'(\B|
000001a0 57 e3 70 c5 8b 26 1d 18 e2 16 e8 58 7b c9 43 eb |W.p..&.....X{.C.|
000001b0 6a 62 5e c6 2f 38 53 9c 05 51 cd 94 66 ab 00 fe |jb^./8S..Q..f...|
000001c0 ff ff 83 fe ff ff 02 00 00 00 00 40 e4 01 00 fe |...........@....|
000001d0 ff ff 05 fe ff ff 02 40 e4 01 00 a8 16 00 00 00 |.......@........|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
unlzma: Decoder error
unlzma: Decoder error
unlzma: Decoder error
unlzma: Decoder error
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
Téma: Nefunkční správce spouštění-11.10 (vyřešeno) (Přečteno 2615 krát)