Nainstaloval som ovladac z
http://mesa3d.sourceforge.net/. Nasiel som ho na Wikipedii.
Vsetko sa mi podarilo GLX+GLU... No stale mi neide OpenGL. Skusal som aj cez KDM aj GDM. Dalej som nasiel na Wiki, ze AIGLX je dost potrebna na OpenGL. Tak som si pozrel Log z X.Org a tam:
[ 24.227] (**) Option "AIGLX" "Off"
(**) -> znamena, ze je to prednastavene v nejakom subore. xorg.conf som nenasiel. Niekedy sa nachadzal /etc/X11 no ja ho tam nemam!!!! Tak kde to mam upravit a povolit ten AIGLX??
Je to vobec nainstalovane???
Log:
[ 23.913]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 23.913] X Protocol Version 11, Revision 0
[ 23.913] Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
[ 23.913] Current Operating System: Linux wPbPC 3.2.0-33-generic-pae #52-Ubuntu SMP Thu Oct 18 16:39:21 UTC 2012 i686
[ 23.914] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-33-generic-pae root=UUID=0ac25380-ccd2-482f-8f4e-d7643b51d166 ro quiet splash
[ 23.914] Build Date: 29 August 2012 12:10:05AM
[ 23.914] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[ 23.914] Current version of pixman: 0.24.4
[ 23.914] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.914] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.914] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 24 21:52:48 2012
[ 24.057] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.206] (==) ServerLayout "default screen"
[ 24.206] (==) No screen section available. Using defaults.
[ 24.206] (**) |-->Screen "Default Screen Section" (0)
[ 24.206] (**) | |-->Monitor "<default monitor>"
[ 24.226] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 24.227] (**) | |-->Device "Card0"
[ 24.227] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.227] (**) Option "AIGLX" "Off"
[ 24.227] (==) Automatically adding devices
[ 24.227] (==) Automatically enabling devices
[ 24.303] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 24.304] Entry deleted from font path.
[ 24.304] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 24.304] Entry deleted from font path.
[ 24.304] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 24.304] Entry deleted from font path.
[ 24.304] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 24.304] Entry deleted from font path.
[ 24.304] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 24.304] Entry deleted from font path.
[ 24.304] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 24.304] Entry deleted from font path.
[ 24.304] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 24.304] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 24.304] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.332] (II) Loader magic: 0xb77145a0
[ 24.332] (II) Module ABI versions:
[ 24.332] X.Org ANSI C Emulation: 0.4
[ 24.332] X.Org Video Driver: 11.0
[ 24.332] X.Org XInput driver : 16.0
[ 24.332] X.Org Server Extension : 6.0
[ 24.334] (--) PCI:*(0:0:2:0) 8086:0be1:1025:0624 rev 11, Mem @ 0x86000000/1048576, I/O @ 0x000050d0/8
[ 24.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24.334] (II) LoadModule: "extmod"
[ 24.389] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 24.420] (II) Module extmod: vendor="X.Org Foundation"
[ 24.420] compiled for 1.11.3, module version = 1.0.0
[ 24.421] Module class: X.Org Server Extension
[ 24.421] ABI class: X.Org Server Extension, version 6.0
[ 24.421] (II) Loading extension MIT-SCREEN-SAVER
[ 24.421] (II) Loading extension XFree86-VidModeExtension
[ 24.421] (II) Loading extension XFree86-DGA
[ 24.421] (II) Loading extension DPMS
[ 24.421] (II) Loading extension XVideo
[ 24.421] (II) Loading extension XVideo-MotionCompensation
[ 24.421] (II) Loading extension X-Resource
[ 24.421] (II) LoadModule: "dbe"
[ 24.421] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 24.441] (II) Module dbe: vendor="X.Org Foundation"
[ 24.441] compiled for 1.11.3, module version = 1.0.0
[ 24.441] Module class: X.Org Server Extension
[ 24.441] ABI class: X.Org Server Extension, version 6.0
[ 24.441] (II) Loading extension DOUBLE-BUFFER
[ 24.441] (II) LoadModule: "glx"
[ 24.442] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.476] (II) Module glx: vendor="X.Org Foundation"
[ 24.476] compiled for 1.11.3, module version = 1.0.0
[ 24.476] ABI class: X.Org Server Extension, version 6.0
[ 24.476] (**) AIGLX disabled
[ 24.476] (II) Loading extension GLX
[ 24.476] (II) LoadModule: "record"
[ 24.476] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.503] (II) Module record: vendor="X.Org Foundation"
[ 24.503] compiled for 1.11.3, module version = 1.13.0
[ 24.503] Module class: X.Org Server Extension
[ 24.503] ABI class: X.Org Server Extension, version 6.0
[ 24.503] (II) Loading extension RECORD
[ 24.503] (II) LoadModule: "dri"
[ 24.504] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.552] (II) Module dri: vendor="X.Org Foundation"
[ 24.552] compiled for 1.11.3, module version = 1.0.0
[ 24.552] ABI class: X.Org Server Extension, version 6.0
[ 24.552] (II) Loading extension XFree86-DRI
[ 24.552] (II) LoadModule: "dri2"
[ 24.553] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.584] (II) Module dri2: vendor="X.Org Foundation"
[ 24.584] compiled for 1.11.3, module version = 1.2.0
[ 24.584] ABI class: X.Org Server Extension, version 6.0
[ 24.584] (II) Loading extension DRI2
[ 24.584] (II) LoadModule: "pvr"
[ 24.596] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so
[ 24.684] (II) Module PVR: vendor="X.Org Foundation"
[ 24.684] compiled for 1.11.3, module version = 1.7.10922
[ 24.684] Module class: X.Org Video Driver
[ 24.684] ABI class: X.Org Video Driver, version 11.0
[ 24.684] (II) pvr: Driver for PowerVR chipsets: PowerVR SGX
[ 24.684] (++) using VT number 7
[ 24.684] drmOpenDevice: node name is /dev/dri/card0
[ 24.684] drmOpenDevice: open result is 8, (OK)
[ 24.685] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 24.685] drmOpenDevice: node name is /dev/dri/card0
[ 24.685] drmOpenDevice: open result is 8, (OK)
[ 24.685] drmOpenByBusid: drmOpenMinor returns 8
[ 24.685] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 24.714] drmOpenDevice: node name is /dev/dri/card0
[ 24.714] drmOpenDevice: open result is 8, (OK)
[ 24.714] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 24.714] drmOpenDevice: node name is /dev/dri/card0
[ 24.714] drmOpenDevice: open result is 8, (OK)
[ 24.714] drmOpenByBusid: drmOpenMinor returns 8
[ 24.714] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 24.744] drmOpenDevice: node name is /dev/dri/card0
[ 24.744] drmOpenDevice: open result is 8, (OK)
[ 24.744] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 24.745] drmOpenDevice: node name is /dev/dri/card0
[ 24.745] drmOpenDevice: open result is 8, (OK)
[ 24.745] drmOpenByBusid: drmOpenMinor returns 8
[ 24.745] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 24.745] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so
[ 24.745] drmOpenDevice: node name is /dev/dri/card0
[ 24.745] drmOpenDevice: open result is 9, (OK)
[ 24.745] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 24.745] drmOpenDevice: node name is /dev/dri/card0
[ 24.745] drmOpenDevice: open result is 9, (OK)
[ 24.745] drmOpenByBusid: drmOpenMinor returns 9
[ 24.745] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 24.746] drmOpenDevice: node name is /dev/dri/card0
[ 24.746] drmOpenDevice: open result is 10, (OK)
[ 24.746] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 24.746] drmOpenDevice: node name is /dev/dri/card0
[ 24.746] drmOpenDevice: open result is 10, (OK)
[ 24.746] drmOpenByBusid: drmOpenMinor returns 10
[ 24.746] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 24.746] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 24.749] drmOpenDevice: node name is /dev/dri/card0
[ 24.749] drmOpenDevice: open result is 11, (OK)
[ 24.749] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 24.749] drmOpenDevice: node name is /dev/dri/card0
[ 24.749] drmOpenDevice: open result is 11, (OK)
[ 24.749] drmOpenByBusid: drmOpenMinor returns 11
[ 24.749] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 24.749] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 24.749] drmOpenDevice: node name is /dev/dri/card0
[ 24.749] drmOpenDevice: open result is 11, (OK)
[ 24.749] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 24.749] drmOpenDevice: node name is /dev/dri/card0
[ 24.749] drmOpenDevice: open result is 11, (OK)
[ 24.749] drmOpenByBusid: drmOpenMinor returns 11
[ 24.749] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 24.749] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 24.829] drmOpenDevice: node name is /dev/dri/card0
[ 24.830] drmOpenDevice: open result is 11, (OK)
[ 24.830] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 24.830] drmOpenDevice: node name is /dev/dri/card0
[ 24.830] drmOpenDevice: open result is 11, (OK)
[ 24.830] drmOpenByBusid: drmOpenMinor returns 11
[ 24.830] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 24.830] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 24.912] (II) pvr(0): source head @cdv-meego_1.2.0-rc19.4
[ 24.913] (II) pvr(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 24.913] (==) pvr(0): Depth 24, (==) framebuffer bpp 32
[ 24.913] (==) pvr(0): RGB weight 888
[ 24.913] (==) pvr(0): Default visual is TrueColor
[ 24.913] (**) pvr(0): Option "FlipChain" "On"
[ 24.913] (**) pvr(0): Option "SoftEXA" "Off"
[ 24.913] (**) pvr(0): Option "DRIDisableVSync" "False"
[ 24.913] (II) pvr(0): Flipchain enabled
[ 24.976] (II) pvr(0): Output VGA1 has no monitor section
[ 25.082] (II) pvr(0): Output LVDS1 has no monitor section
[ 25.082] (II) pvr(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 25.127] (II) pvr(0): Output DVI1 has no monitor section
[ 25.128] (II) pvr(0): Output DP1 has no monitor section
[ 25.192] (II) pvr(0): EDID for output VGA1
[ 25.298] (II) pvr(0): EDID for output LVDS1
[ 25.298] (II) pvr(0): Manufacturer: CMO Model: 1018 Serial#: 0
[ 25.298] (II) pvr(0): Year: 2009 Week: 51
[ 25.298] (II) pvr(0): EDID Version: 1.3
[ 25.298] (II) pvr(0): Digital Display Input
[ 25.298] (II) pvr(0): Max Image Size [cm]: horiz.: 22 vert.: 12
[ 25.298] (II) pvr(0): Gamma: 2.20
[ 25.298] (II) pvr(0): No DPMS capabilities specified
[ 25.298] (II) pvr(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.298] (II) pvr(0): First detailed timing is preferred mode
[ 25.298] (II) pvr(0): redX: 0.583 redY: 0.355 greenX: 0.335 greenY: 0.562
[ 25.298] (II) pvr(0): blueX: 0.152 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
[ 25.298] (II) pvr(0): Manufacturer's mask: 0
[ 25.298] (II) pvr(0): Supported detailed timing:
[ 25.298] (II) pvr(0): clock: 54.2 MHz Image Size: 222 x 125 mm
[ 25.298] (II) pvr(0): h_active: 1024 h_sync: 1133 h_sync_end 1205 h_blank_end 1386 h_border: 0
[ 25.298] (II) pvr(0): v_active: 600 v_sync: 607 v_sync_end 620 v_blanking: 652 v_border: 0
[ 25.298] (II) pvr(0): N101L6-L0D
[ 25.298] (II) pvr(0): CMO
[ 25.298] (II) pvr(0): N101L6-L0D
[ 25.298] (II) pvr(0): EDID (in hex):
[ 25.298] (II) pvr(0): 00ffffffffffff000daf181000000000
[ 25.298] (II) pvr(0): 3313010380160c780a4f05955b558f27
[ 25.299] (II) pvr(0): 22505400000001010101010101010101
[ 25.299] (II) pvr(0): 0101010101012c15006a415834206d48
[ 25.299] (II) pvr(0): 7d00de7d00000018000000fe004e3130
[ 25.299] (II) pvr(0): 314c362d4c30440a2020000000fe0043
[ 25.299] (II) pvr(0): 4d4f0a202020202020202020000000fe
[ 25.299] (II) pvr(0): 004e3130314c362d4c30440a2020001d
[ 25.299] (II) pvr(0): Not using default mode "320x240" (doublescan mode not supported)
[ 25.299] (II) pvr(0): Not using default mode "400x300" (doublescan mode not supported)
[ 25.299] (II) pvr(0): Not using default mode "400x300" (doublescan mode not supported)
[ 25.299] (II) pvr(0): Not using default mode "512x384" (doublescan mode not supported)
[ 25.299] (II) pvr(0): Not using default mode "640x480" (doublescan mode not supported)
[ 25.299] (II) pvr(0): Not using default mode "640x512" (doublescan mode not supported)
[ 25.299] (II) pvr(0): Not using default mode "800x600" (doublescan mode not supported)
[ 25.299] (II) pvr(0): Not using default mode "576x432" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "680x384" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "680x384" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "700x525" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "720x450" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "800x512" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "840x525" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "840x525" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "960x540" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Not using default mode "960x600" (doublescan mode not supported)
[ 25.300] (II) pvr(0): Printing probed modes for output LVDS1
[ 25.300] (II) pvr(0): Modeline "1024x600"x60.0 54.20 1024 1133 1205 1386 600 607 620 652 -hsync -vsync (39.1 kHz)
[ 25.300] (II) pvr(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 25.300] (II) pvr(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 25.300] (II) pvr(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 25.345] (II) pvr(0): EDID for output DVI1
[ 25.346] (II) pvr(0): EDID for output DP1
[ 25.346] (II) pvr(0): Output VGA1 disconnected
[ 25.346] (II) pvr(0): Output LVDS1 connected
[ 25.346] (II) pvr(0): Output DVI1 disconnected
[ 25.346] (II) pvr(0): Output DP1 disconnected
[ 25.346] (II) pvr(0): Using exact sizes for initial modes
[ 25.346] (II) pvr(0): Output LVDS1 using initial mode 1024x600
[ 25.346] (II) pvr(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.346] (--) pvr(0): Virtual size is 1024x600 (pitch 1024)
[ 25.346] (**) pvr(0): Driver mode "1024x600": 54.2 MHz (scaled from 0.0 MHz), 39.1 kHz, 60.0 Hz
[ 25.346] (II) pvr(0): Modeline "1024x600"x60.0 54.20 1024 1133 1205 1386 600 607 620 652 -hsync -vsync (39.1 kHz)
[ 25.346] (**) pvr(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 25.346] (II) pvr(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 25.346] (**) pvr(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 25.346] (II) pvr(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 25.346] (**) pvr(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 25.346] (II) pvr(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 25.346] (==) pvr(0): DPI set to (96, 96)
[ 25.435] (II) Loading sub module "fb"
[ 25.435] (II) LoadModule: "fb"
[ 25.436] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.467] (II) Module fb: vendor="X.Org Foundation"
[ 25.467] compiled for 1.11.3, module version = 1.0.0
[ 25.467] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.467] (II) pvr(0): [pvr] Software copy threshold : 0B
[ 25.467] (II) pvr(0): [pvr] Software solid threshold : 0B
[ 25.467] (II) pvr(0): [pvr] Software composite threshold : 0B
[ 25.467] (II) pvr(0): [pvr] Pixmap pool size: 0B
[ 25.467] (II) Loading sub module "exa"
[ 25.467] (II) LoadModule: "exa"
[ 25.468] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 25.504] (II) Module exa: vendor="X.Org Foundation"
[ 25.504] compiled for 1.11.3, module version = 2.5.0
[ 25.504] ABI class: X.Org Video Driver, version 11.0
[ 25.504] PVRPreInit: done
[ 25.504] (--) Depth 24 pixmap format is 32 bpp
[ 25.533] (II) pvr(0): [DRI2] Setup complete
[ 25.533] (II) pvr(0): [DRI2] DRI driver: pvr
[ 25.540] (II) EXA(0): Driver allocated offscreen pixmaps
[ 25.540] (II) EXA(0): Driver registered support for the following operations:
[ 25.541] (II) Solid
[ 25.541] (II) Copy
[ 25.541] (II) Composite (RENDER acceleration)
[ 25.557] (==) pvr(0): Backing store disabled
[ 25.557] (==) pvr(0): Silken mouse enabled
[ 25.557] (==) pvr(0): DPMS enabled
[ 25.557] (II) pvr(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.557] (II) pvr(0): max backlight 9
[ 25.557] (II) pvr(0): active backlight 5
[ 25.558] (==) pvr(0): Direct rendering enabled
[ 25.558] (II) pvr(0): Enable XVideo
[ 25.570] (II) pvr(0): [dri] Created flip chain 1
[ 25.571] (II) pvr(0): hotplug detection enabled
[ 25.571] (--) RandR disabled
[ 25.571] (II) Initializing built-in extension Generic Event Extension
[ 25.571] (II) Initializing built-in extension SHAPE
[ 25.571] (II) Initializing built-in extension MIT-SHM
[ 25.571] (II) Initializing built-in extension XInputExtension
[ 25.571] (II) Initializing built-in extension XTEST
[ 25.571] (II) Initializing built-in extension BIG-REQUESTS
[ 25.571] (II) Initializing built-in extension SYNC
[ 25.571] (II) Initializing built-in extension XKEYBOARD
[ 25.571] (II) Initializing built-in extension XC-MISC
[ 25.571] (II) Initializing built-in extension SECURITY
[ 25.571] (II) Initializing built-in extension XINERAMA
[ 25.571] (II) Initializing built-in extension XFIXES
[ 25.571] (II) Initializing built-in extension RENDER
[ 25.571] (II) Initializing built-in extension RANDR
[ 25.571] (II) Initializing built-in extension COMPOSITE
[ 25.571] (II) Initializing built-in extension DAMAGE
[ 27.210] (II) AIGLX: Loaded and initialized swrast
[ 27.210] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 27.211] (II) pvr(0): Setting screen physical size to 270 x 158
[ 27.438] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 27.484] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 27.484] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.484] (II) LoadModule: "evdev"
[ 27.484] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.525] (II) Module evdev: vendor="X.Org Foundation"
[ 27.525] compiled for 1.11.3, module version = 2.7.0
[ 27.525] Module class: X.Org XInput Driver
[ 27.525] ABI class: X.Org XInput driver, version 16.0
[ 27.525] (II) Using input driver 'evdev' for 'Power Button'
[ 27.525] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.525] (**) Power Button: always reports core events
[ 27.525] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 27.525] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.525] (--) evdev: Power Button: Found keys
[ 27.525] (II) evdev: Power Button: Configuring as keyboard
[ 27.525] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 27.525] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.525] (**) Option "xkb_rules" "evdev"
[ 27.525] (**) Option "xkb_model" "pc105"
[ 27.525] (**) Option "xkb_layout" "us"
[ 27.527] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 27.527] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.528] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.528] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.528] (**) Video Bus: always reports core events
[ 27.528] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 27.528] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.528] (--) evdev: Video Bus: Found keys
[ 27.528] (II) evdev: Video Bus: Configuring as keyboard
[ 27.528] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[ 27.528] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.528] (**) Option "xkb_rules" "evdev"
[ 27.528] (**) Option "xkb_model" "pc105"
[ 27.528] (**) Option "xkb_layout" "us"
[ 27.530] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 27.530] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.530] (II) Using input driver 'evdev' for 'Power Button'
[ 27.530] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.530] (**) Power Button: always reports core events
[ 27.530] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 27.530] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.530] (--) evdev: Power Button: Found keys
[ 27.530] (II) evdev: Power Button: Configuring as keyboard
[ 27.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 27.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 27.531] (**) Option "xkb_rules" "evdev"
[ 27.531] (**) Option "xkb_model" "pc105"
[ 27.531] (**) Option "xkb_layout" "us"
[ 27.532] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 27.532] (II) No input driver specified, ignoring this device.
[ 27.532] (II) This device may have been added with another device file.
[ 27.534] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 27.534] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 27.534] (II) Using input driver 'evdev' for 'Sleep Button'
[ 27.534] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.534] (**) Sleep Button: always reports core events
[ 27.534] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 27.534] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 27.534] (--) evdev: Sleep Button: Found keys
[ 27.534] (II) evdev: Sleep Button: Configuring as keyboard
[ 27.534] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 27.534] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 27.534] (**) Option "xkb_rules" "evdev"
[ 27.535] (**) Option "xkb_model" "pc105"
[ 27.535] (**) Option "xkb_layout" "us"
[ 27.537] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 27.537] (II) No input driver specified, ignoring this device.
[ 27.537] (II) This device may have been added with another device file.
[ 27.538] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event11)
[ 27.538] (II) No input driver specified, ignoring this device.
[ 27.539] (II) This device may have been added with another device file.
[ 27.540] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 27.540] (II) No input driver specified, ignoring this device.
[ 27.540] (II) This device may have been added with another device file.
[ 27.541] (II) config/udev: Adding input device WebCam (/dev/input/event8)
[ 27.542] (**) WebCam: Applying InputClass "evdev keyboard catchall"
[ 27.542] (II) Using input driver 'evdev' for 'WebCam'
[ 27.542] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.542] (**) WebCam: always reports core events
[ 27.542] (**) evdev: WebCam: Device: "/dev/input/event8"
[ 27.542] (--) evdev: WebCam: Vendor 0x4f2 Product 0xb367
[ 27.542] (--) evdev: WebCam: Found keys
[ 27.542] (II) evdev: WebCam: Configuring as keyboard
[ 27.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8/event8"
[ 27.542] (II) XINPUT: Adding extended input device "WebCam" (type: KEYBOARD, id 10)
[ 27.542] (**) Option "xkb_rules" "evdev"
[ 27.543] (**) Option "xkb_model" "pc105"
[ 27.543] (**) Option "xkb_layout" "us"
[ 27.545] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 27.545] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.545] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.545] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.546] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.546] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 27.546] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 27.546] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 27.546] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.546] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 27.546] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 27.546] (**) Option "xkb_rules" "evdev"
[ 27.546] (**) Option "xkb_model" "pc105"
[ 27.546] (**) Option "xkb_layout" "us"
[ 27.549] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 27.549] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 27.549] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 27.549] (II) LoadModule: "synaptics"
[ 27.550] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.571] (II) Module synaptics: vendor="X.Org Foundation"
[ 27.571] compiled for 1.11.3, module version = 1.6.2
[ 27.571] Module class: X.Org XInput Driver
[ 27.571] ABI class: X.Org XInput driver, version 16.0
[ 27.571] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 27.571] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.571] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.571] (**) Option "Device" "/dev/input/event7"
[ 27.816] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5612
[ 27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4618
[ 27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 27.816] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.816] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.948] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input7/event7"
[ 27.948] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 27.948] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 27.948] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 27.948] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 27.948] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 27.948] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 27.949] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 27.949] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 27.949] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.950] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 27.950] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 27.956] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event5)
[ 27.956] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 27.957] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 27.957] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.957] (**) Acer WMI hotkeys: always reports core events
[ 27.957] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event5"
[ 27.957] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 27.957] (--) evdev: Acer WMI hotkeys: Found keys
[ 27.957] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 27.957] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 27.957] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13)
[ 27.957] (**) Option "xkb_rules" "evdev"
[ 27.957] (**) Option "xkb_model" "pc105"
[ 27.957] (**) Option "xkb_layout" "us"
[ 79.030] (II) pvr(0): EDID vendor "CMO", prod id 4120
[ 79.030] (II) pvr(0): Printing DDC gathered Modelines:
[ 79.030] (II) pvr(0): Modeline "1024x600"x0.0 54.20 1024 1133 1205 1386 600 607 620 652 -hsync -vsync (39.1 kHz)
[ 111.470] (II) pvr(0): EDID vendor "CMO", prod id 4120
[ 111.470] (II) pvr(0): Printing DDC gathered Modelines:
[ 111.470] (II) pvr(0): Modeline "1024x600"x0.0 54.20 1024 1133 1205 1386 600 607 620 652 -hsync -vsync (39.1 kHz)
[ 595.147] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
posielam screen..
[příloha smazaná administrátorem]