to je moc dlouhý a nevejde se to sem
[ 14.135071] usbcore: registered new interface driver uvcvideo
[ 14.135074] USB Video Class driver (1.1.1)
[ 14.498959] kvm: disabled by bios
[ 14.650298] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 14.715902] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 14.742352] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 14.805114] wl: module license 'MIXED/Proprietary' taints kernel.
[ 14.805118] Disabling lock debugging due to kernel taint
[ 14.861637] lib80211_crypt: registered algorithm 'TKIP'
[ 14.997392] eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
[ 15.189335] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.305705] hda_codec: CX20590: BIOS auto-probing.
[ 15.345664] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.345746] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.345818] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.471694] init: failsafe main process (921) killed by TERM signal
[ 15.566370] type=1400 audit(1361809094.388:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1024 comm="apparmor_parser"
[ 15.566697] type=1400 audit(1361809094.388:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1027 comm="apparmor_parser"
[ 15.566733] type=1400 audit(1361809094.388:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1024 comm="apparmor_parser"
[ 15.567811] type=1400 audit(1361809094.388:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1027 comm="apparmor_parser"
[ 15.570597] type=1400 audit(1361809094.392:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1029 comm="apparmor_parser"
[ 15.571139] type=1400 audit(1361809094.392:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1029 comm="apparmor_parser"
[ 15.571627] type=1400 audit(1361809094.392:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=1027 comm="apparmor_parser"
[ 15.656159] Bluetooth: RFCOMM TTY layer initialized
[ 15.656164] Bluetooth: RFCOMM socket layer initialized
[ 15.656167] Bluetooth: RFCOMM ver 1.11
[ 15.656306] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.656309] Bluetooth: BNEP filters: protocol multicast
[ 15.668864] ppdev: user-space parallel port driver
[ 15.866068] alx 0000:02:00.0: irq 46 for MSI/MSI-X
[ 15.866076] alx 0000:02:00.0: irq 47 for MSI/MSI-X
[ 15.866081] alx 0000:02:00.0: irq 48 for MSI/MSI-X
[ 15.866087] alx 0000:02:00.0: irq 49 for MSI/MSI-X
[ 15.866092] alx 0000:02:00.0: irq 50 for MSI/MSI-X
[ 15.867672] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 15.868732] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 17.072744] init: plymouth-stop pre-start process (1341) terminated with status 1
[ 379.722618] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 379.741821] usb 3-2: New USB device found, idVendor=eb1a, idProduct=2881
[ 379.741829] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 379.741833] usb 3-2: Product: USB 2881 Video
[ 379.853575] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[ 379.853577] em28xx: Video interface 0 found
[ 379.853579] em28xx: DVB interface 0 found
[ 379.853615] em28xx #0: chip ID is em2882/em2883
[ 379.931102] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 379.931121] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 379.931136] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 379.931150] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 379.931165] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 379.931179] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 379.931193] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 379.931207] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 379.931221] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 379.931235] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 379.931249] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 379.931263] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 379.931277] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 379.931291] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 379.931305] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
[ 379.931320] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 379.931337] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
[ 379.931340] em28xx #0: EEPROM info:
[ 379.931342] em28xx #0: AC97 audio (5 sample rates)
[ 379.931344] em28xx #0: USB Remote wakeup capable
[ 379.931347] em28xx #0: 500mA max power
[ 379.931350] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 379.978364] em28xx #0: Your board has no unique USB ID.
[ 379.978372] em28xx #0: A hint were successfully done, based on eeprom hash.
[ 379.978375] em28xx #0: This method is not 100% failproof.
[ 379.978377] em28xx #0: If the board were missdetected, please email this log to:
[ 379.978379] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 379.978382] em28xx #0: Board detected as Pinnacle Hybrid Pro
[ 380.109886] em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
[ 380.171507] tvp5150 7-005c: chip found @ 0xb8 (em28xx #0)
[ 380.234003] tvp5150 7-005c: tvp5150am1 detected.
[ 380.254812] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[ 380.297025] xc2028 7-0061: creating new instance
[ 380.297037] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 380.300009] xc2028 7-0061: Error: firmware xc3028-v27.fw not found.
[ 380.300057] em28xx #0: Config register raw data: 0x58
[ 380.300312] em28xx #0: AC97 vendor ID = 0xffffffff
[ 380.300425] em28xx #0: AC97 features = 0xffff
[ 380.300431] em28xx #0: Unknown AC97 audio processor detected!
[ 380.433956] em28xx #0: v4l2 driver version 0.1.3
[ 380.436763] xc2028 7-0061: Error: firmware xc3028-v27.fw not found.
[ 380.499840] em28xx #0: V4L2 video device registered as video1
[ 380.499847] em28xx #0: V4L2 VBI device registered as vbi0
[ 380.500620] em28xx audio device (eb1a:2881): interface 1, class 1
[ 380.500643] em28xx audio device (eb1a:2881): interface 2, class 1
[ 380.500964] usbcore: registered new interface driver em28xx
[ 380.504751] usbcore: registered new interface driver snd-usb-audio
[ 380.854278] xc2028 7-0061: attaching existing instance
[ 380.854283] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 380.854285] em28xx #0: em28xx #0/2: xc3028 attached
[ 380.854287] DVB: registering new adapter (em28xx #0)
[ 380.854289] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 380.854618] em28xx #0: Successfully loaded em28xx-dvb
[ 380.854622] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 957.920701] usb 3-2: USB disconnect, device number 2
[ 957.920842] em28xx #0: disconnecting em28xx #0 video
[ 957.920854] em28xx #0: V4L2 device vbi0 deregistered
[ 957.921036] em28xx #0: V4L2 device video1 deregistered
[ 957.922108] xc2028 7-0061: destroying instance
[ 6619.198637] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 6619.217653] usb 3-2: New USB device found, idVendor=eb1a, idProduct=2881
[ 6619.217657] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6619.217660] usb 3-2: Product: USB 2881 Video
[ 6619.218048] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[ 6619.218050] em28xx: Video interface 0 found
[ 6619.218052] em28xx: DVB interface 0 found
[ 6619.218074] em28xx #0: chip ID is em2882/em2883
[ 6619.295270] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 6619.295301] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 6619.295327] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 6619.295354] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 6619.295380] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6619.295405] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6619.295431] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 6619.295458] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 6619.295482] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 6619.295507] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6619.295531] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6619.295555] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6619.295579] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6619.295605] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6619.295628] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
[ 6619.295653] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 6619.295683] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
[ 6619.295688] em28xx #0: EEPROM info:
[ 6619.295693] em28xx #0: AC97 audio (5 sample rates)
[ 6619.295696] em28xx #0: USB Remote wakeup capable
[ 6619.295700] em28xx #0: 500mA max power
[ 6619.295705] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 6619.342602] em28xx #0: Your board has no unique USB ID.
[ 6619.342611] em28xx #0: A hint were successfully done, based on eeprom hash.
[ 6619.342615] em28xx #0: This method is not 100% failproof.
[ 6619.342619] em28xx #0: If the board were missdetected, please email this log to:
[ 6619.342623] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 6619.342628] em28xx #0: Board detected as Pinnacle Hybrid Pro
[ 6619.474244] em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
[ 6619.477648] tvp5150 7-005c: chip found @ 0xb8 (em28xx #0)
[ 6619.538424] tvp5150 7-005c: tvp5150am1 detected.
[ 6619.559603] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[ 6619.559632] xc2028 7-0061: creating new instance
[ 6619.559638] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 6619.562460] xc2028 7-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 6619.610037] xc2028 7-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 6620.485724] xc2028 7-0061: Loading firmware for type=(0), id 000000000000b700.
[ 6620.498902] SCODE (20000000), id 000000000000b700:
[ 6620.498913] xc2028 7-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 6620.620823] em28xx #0: Config register raw data: 0x58
[ 6620.621055] em28xx #0: AC97 vendor ID = 0xffffffff
[ 6620.621174] em28xx #0: AC97 features = 0x6a90
[ 6620.621177] em28xx #0: Empia 202 AC97 audio processor detected
[ 6620.797111] em28xx #0: v4l2 driver version 0.1.3
[ 6620.844438] xc2028 7-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 6621.723929] (0), id 00000000000000ff:
[ 6621.723933] xc2028 7-0061: Loading firmware for type=(0), id 0000000100000007.
[ 6621.736760] xc2028 7-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[ 6621.921466] em28xx #0: V4L2 video device registered as video1
[ 6621.921469] em28xx #0: V4L2 VBI device registered as vbi0
[ 6621.922152] em28xx audio device (eb1a:2881): interface 1, class 1
[ 6622.063372] xc2028 7-0061: attaching existing instance
[ 6622.063380] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 6622.063384] em28xx #0: em28xx #0/2: xc3028 attached
[ 6622.063388] DVB: registering new adapter (em28xx #0)
[ 6622.063394] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 6622.068150] em28xx #0: Successfully loaded em28xx-dvb
[ 8053.538137] usb 3-2: USB disconnect, device number 3
[ 8053.538238] em28xx #0: disconnecting em28xx #0 video
[ 8053.538244] em28xx #0: V4L2 device vbi0 deregistered
[ 8053.538428] em28xx #0: V4L2 device video1 deregistered
[ 8053.540081] xc2028 7-0061: destroying instance
[ 8063.369749] usb 3-2: new high-speed USB device number 4 using xhci_hcd
[ 8063.388746] usb 3-2: New USB device found, idVendor=eb1a, idProduct=2881
[ 8063.388751] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8063.388754] usb 3-2: Product: USB 2881 Video
[ 8063.389169] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[ 8063.389172] em28xx: Video interface 0 found
[ 8063.389173] em28xx: DVB interface 0 found
[ 8063.389195] em28xx #0: chip ID is em2882/em2883
[ 8063.466208] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 8063.466227] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 8063.466242] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 8063.466256] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 8063.466271] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8063.466285] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8063.466299] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 8063.466313] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 8063.466327] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 8063.466341] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8063.466355] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8063.466369] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8063.466383] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8063.466397] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8063.466411] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
[ 8063.466426] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 8063.466443] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
[ 8063.466448] em28xx #0: EEPROM info:
[ 8063.466451] em28xx #0: AC97 audio (5 sample rates)
[ 8063.466455] em28xx #0: USB Remote wakeup capable
[ 8063.466458] em28xx #0: 500mA max power
[ 8063.466462] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 8063.513689] em28xx #0: Your board has no unique USB ID.
[ 8063.513698] em28xx #0: A hint were successfully done, based on eeprom hash.
[ 8063.513702] em28xx #0: This method is not 100% failproof.
[ 8063.513706] em28xx #0: If the board were missdetected, please email this log to:
[ 8063.513710] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 8063.513715] em28xx #0: Board detected as Pinnacle Hybrid Pro
[ 8063.645341] em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
[ 8063.648629] tvp5150 7-005c: chip found @ 0xb8 (em28xx #0)
[ 8063.709579] tvp5150 7-005c: tvp5150am1 detected.
[ 8063.729442] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[ 8063.729468] xc2028 7-0061: creating new instance
[ 8063.729474] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 8063.732025] xc2028 7-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 8063.777147] xc2028 7-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 8064.661059] xc2028 7-0061: Loading firmware for type=(0), id 000000000000b700.
[ 8064.674035] SCODE (20000000), id 000000000000b700:
[ 8064.674047] xc2028 7-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 8064.795928] em28xx #0: Config register raw data: 0x58
[ 8064.796278] em28xx #0: AC97 vendor ID = 0x8880ffff
[ 8064.796396] em28xx #0: AC97 features = 0xffff
[ 8064.796401] em28xx #0: Unknown AC97 audio processor detected!
[ 8065.016203] em28xx #0: v4l2 driver version 0.1.3
[ 8065.063517] xc2028 7-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 8065.947332] (0), id 00000000000000ff:
[ 8065.947339] xc2028 7-0061: Loading firmware for type=(0), id 0000000100000007.
[ 8065.960376] xc2028 7-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[ 8066.144724] em28xx #0: V4L2 video device registered as video1
[ 8066.144732] em28xx #0: V4L2 VBI device registered as vbi0
[ 8066.145511] em28xx audio device (eb1a:2881): interface 1, class 1
[ 8066.286400] xc2028 7-0061: attaching existing instance
[ 8066.286403] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 8066.286404] em28xx #0: em28xx #0/2: xc3028 attached
[ 8066.286406] DVB: registering new adapter (em28xx #0)
[ 8066.286408] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 8066.287354] em28xx #0: Successfully loaded em28xx-dvb
[ 9195.781472] usb 3-2: USB disconnect, device number 4
[ 9195.781563] em28xx #0: disconnecting em28xx #0 video
[ 9195.781568] em28xx #0: V4L2 device vbi0 deregistered
[ 9195.781701] em28xx #0: V4L2 device video1 deregistered
[ 9195.782714] xc2028 7-0061: destroying instance
[ 9195.995985] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 9205.096181] usb 3-2: new high-speed USB device number 6 using xhci_hcd
[ 9205.115229] usb 3-2: New USB device found, idVendor=eb1a, idProduct=2881
[ 9205.115233] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9205.115237] usb 3-2: Product: USB 2881 Video
[ 9205.115642] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[ 9205.115645] em28xx: Video interface 0 found
[ 9205.115647] em28xx: DVB interface 0 found
[ 9205.115670] em28xx #0: chip ID is em2882/em2883
[ 9205.192819] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 9205.192849] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 9205.192870] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 9205.192892] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 9205.192915] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9205.192939] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9205.192964] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 9205.192988] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 9205.193013] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 9205.193035] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9205.193050] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9205.193064] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9205.193078] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9205.193092] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9205.193106] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
[ 9205.193121] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 9205.193138] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
[ 9205.193141] em28xx #0: EEPROM info:
[ 9205.193144] em28xx #0: AC97 audio (5 sample rates)
[ 9205.193146] em28xx #0: USB Remote wakeup capable
[ 9205.193148] em28xx #0: 500mA max power
[ 9205.193151] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 9205.240197] em28xx #0: Your board has no unique USB ID.
[ 9205.240205] em28xx #0: A hint were successfully done, based on eeprom hash.
[ 9205.240232] em28xx #0: This method is not 100% failproof.
[ 9205.240236] em28xx #0: If the board were missdetected, please email this log to:
[ 9205.240239] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 9205.240243] em28xx #0: Board detected as Pinnacle Hybrid Pro
[ 9205.371874] em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
[ 9205.374677] tvp5150 7-005c: chip found @ 0xb8 (em28xx #0)
[ 9205.436094] tvp5150 7-005c: tvp5150am1 detected.
[ 9205.456070] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[ 9205.456095] xc2028 7-0061: creating new instance
[ 9205.456098] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 9205.458730] xc2028 7-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 9205.503652] xc2028 7-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 9206.383264] xc2028 7-0061: Loading firmware for type=(0), id 000000000000b700.
[ 9206.396004] SCODE (20000000), id 000000000000b700:
[ 9206.396009] xc2028 7-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 9206.518383] em28xx #0: Config register raw data: 0x58
[ 9206.518615] em28xx #0: AC97 vendor ID = 0x0880ffff
[ 9206.518734] em28xx #0: AC97 features = 0x6a90
[ 9206.518737] em28xx #0: Unknown AC97 audio processor detected!
[ 9206.650749] em28xx #0: v4l2 driver version 0.1.3
[ 9206.698109] xc2028 7-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 9207.581798] (0), id 00000000000000ff:
[ 9207.581806] xc2028 7-0061: Loading firmware for type=(0), id 0000000100000007.
[ 9207.594856] xc2028 7-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[ 9207.779345] em28xx #0: V4L2 video device registered as video1
[ 9207.779352] em28xx #0: V4L2 VBI device registered as vbi0
[ 9207.780112] em28xx audio device (eb1a:2881): interface 1, class 1
[ 9207.921065] xc2028 7-0061: attaching existing instance
[ 9207.921072] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 9207.921075] em28xx #0: em28xx #0/2: xc3028 attached
[ 9207.921078] DVB: registering new adapter (em28xx #0)
[ 9207.921081] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 9207.922649] em28xx #0: Successfully loaded em28xx-dvb
EDIT//Tadeáš Pařík: Dávejte, prosím, ty výpisy do code.